diff options
Diffstat (limited to 'contrib/netbsd-tests/net/if_pppoe')
| -rwxr-xr-x | contrib/netbsd-tests/net/if_pppoe/t_pppoe.sh | 416 |
1 files changed, 416 insertions, 0 deletions
diff --git a/contrib/netbsd-tests/net/if_pppoe/t_pppoe.sh b/contrib/netbsd-tests/net/if_pppoe/t_pppoe.sh new file mode 100755 index 0000000..8d9d5c2 --- /dev/null +++ b/contrib/netbsd-tests/net/if_pppoe/t_pppoe.sh @@ -0,0 +1,416 @@ +# $NetBSD: t_pppoe.sh,v 1.16 2016/12/14 03:30:30 knakahara Exp $ +# +# Copyright (c) 2016 Internet Initiative Japan Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS +# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +server="rump_server -lrump -lrumpnet -lrumpnet_net -lrumpnet_netinet \ + -lrumpnet_netinet6 -lrumpnet_shmif -lrumpdev \ + -lrumpnet_pppoe" +# pppoectl doesn't work with RUMPHIJACK=sysctl=yes +HIJACKING="env LD_PRELOAD=/usr/lib/librumphijack.so" + +SERVER=unix://commsock1 +CLIENT=unix://commsock2 + +SERVER_IP=10.3.3.1 +CLIENT_IP=10.3.3.3 +SERVER_IP6=fc00::1 +CLIENT_IP6=fc00::3 +AUTHNAME=foobar@baz.com +SECRET=oink +BUS=bus0 +TIMEOUT=3 +WAITTIME=10 +DEBUG=${DEBUG:-false} + +setup() +{ + inet=true + + if [ $# -ne 0 ]; then + eval $@ + fi + + atf_check -s exit:0 ${server} $SERVER + atf_check -s exit:0 ${server} $CLIENT + + export RUMP_SERVER=$SERVER + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr $BUS + atf_check -s exit:0 rump.ifconfig shmif0 up + + atf_check -s exit:0 rump.ifconfig pppoe0 create + $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \ + inet $SERVER_IP $CLIENT_IP down + atf_check -s exit:0 rump.ifconfig pppoe0 link0 + + $DEBUG && rump.ifconfig + $DEBUG && $HIJACKING pppoectl -d pppoe0 + + atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0" + unset RUMP_SERVER + + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 rump.ifconfig shmif0 create + atf_check -s exit:0 rump.ifconfig shmif0 linkstr $BUS + atf_check -s exit:0 rump.ifconfig shmif0 up + + atf_check -s exit:0 rump.ifconfig pppoe0 create + $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \ + inet 0.0.0.0 0.0.0.1 down + + atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0" + unset RUMP_SERVER +} + +cleanup() +{ + env RUMP_SERVER=$SERVER rump.halt + env RUMP_SERVER=$CLIENT rump.halt +} + + +wait_for_session_established() +{ + local dontfail=$1 + local n=$WAITTIME + + for i in $(seq $n); do + $HIJACKING pppoectl -d pppoe0 |grep -q "state = session" + [ $? = 0 ] && return + sleep 1 + done + + if [ "$dontfail" != "dontfail" ]; then + atf_fail "Couldn't connect to the server for $n seconds." + fi +} + +wait_for_disconnected() +{ + local dontfail=$1 + local n=$WAITTIME + + for i in $(seq $n); do + $HIJACKING pppoectl -d pppoe0 | grep -q "state = initial" + [ $? = 0 ] && return + # If PPPoE client is disconnected by PPPoE server and then + # the client kicks callout of pppoe_timeout(), the client + # state is changed to PPPOE_STATE_PADI_SENT while padi retrying. + $HIJACKING pppoectl -d pppoe0 | grep -q "state = PADI sent" + [ $? = 0 ] && return + + sleep 1 + done + + if [ "$dontfail" != "dontfail" ]; then + atf_fail "Couldn't disconnect for $n seconds." + fi +} + +run_test() +{ + local auth=$1 + setup + + # As pppoe client doesn't support rechallenge yet. + local server_optparam="" + if [ $auth = "chap" ]; then + server_optparam="norechallenge" + fi + + export RUMP_SERVER=$SERVER + local setup_serverparam="pppoectl pppoe0 hisauthproto=$auth \ + 'hisauthname=$AUTHNAME' \ + 'hisauthsecret=$SECRET' \ + 'myauthproto=none' \ + $server_optparam" + atf_check -s exit:0 -x "$HIJACKING $setup_serverparam" + atf_check -s exit:0 rump.ifconfig pppoe0 up + unset RUMP_SERVER + + export RUMP_SERVER=$CLIENT + local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ + 'myauthname=$AUTHNAME' \ + 'myauthsecret=$SECRET' \ + 'hisauthproto=none'" + atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" + atf_check -s exit:0 rump.ifconfig pppoe0 up + $DEBUG && rump.ifconfig + wait_for_session_established + atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $SERVER_IP + unset RUMP_SERVER + + # test for disconnection from server + export RUMP_SERVER=$SERVER + atf_check -s exit:0 rump.ifconfig pppoe0 down + wait_for_disconnected + export RUMP_SERVER=$CLIENT + wait_for_disconnected + atf_check -s not-exit:0 -o ignore -e ignore \ + rump.ping -c 1 -w $TIMEOUT $SERVER_IP + atf_check -s exit:0 -o match:'PADI sent' -x "$HIJACKING pppoectl -d pppoe0" + unset RUMP_SERVER + + # test for recoonecting + atf_check -s exit:0 -x "env RUMP_SERVER=$SERVER rump.ifconfig pppoe0 up" + export RUMP_SERVER=$CLIENT + wait_for_session_established + atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $SERVER_IP + unset RUMP_SERVER + + # test for disconnection from client + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 -x rump.ifconfig pppoe0 down + wait_for_disconnected + export RUMP_SERVER=$SERVER + wait_for_disconnected + $DEBUG && $HIJACKING pppoectl -d pppoe0 + atf_check -s not-exit:0 -o ignore -e ignore \ + rump.ping -c 1 -w $TIMEOUT $CLIENT_IP + atf_check -s exit:0 -o match:'initial' -x "$HIJACKING pppoectl -d pppoe0" + unset RUMP_SERVER + + # test for reconnecting + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 -x rump.ifconfig pppoe0 up + wait_for_session_established + $DEBUG && rump.ifconfig pppoe0 + $DEBUG && $HIJACKING pppoectl -d pppoe0 + unset RUMP_SERVER + + export RUMP_SERVER=$SERVER + atf_check -s exit:0 rump.ifconfig -w 10 + atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $CLIENT_IP + atf_check -s exit:0 -o match:'session' -x "$HIJACKING pppoectl -d pppoe0" + $DEBUG && HIJACKING pppoectl -d pppoe0 + unset RUMP_SERVER + + # test for invalid password + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 rump.ifconfig pppoe0 down + wait_for_disconnected + local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ + 'myauthname=$AUTHNAME' \ + 'myauthsecret=invalidsecret' \ + 'hisauthproto=none'" + atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" + atf_check -s exit:0 rump.ifconfig pppoe0 up + wait_for_session_established dontfail + atf_check -s not-exit:0 -o ignore -e ignore \ + rump.ping -c 1 -w $TIMEOUT $SERVER_IP + atf_check -s exit:0 -o match:'DETACHED' rump.ifconfig pppoe0 + unset RUMP_SERVER +} + +atf_test_case pppoe_pap cleanup + +pppoe_pap_head() +{ + atf_set "descr" "Does simple pap tests" + atf_set "require.progs" "rump_server pppoectl" +} + +pppoe_pap_body() +{ + run_test pap +} + +pppoe_pap_cleanup() +{ + cleanup +} + +atf_test_case pppoe_chap cleanup + +pppoe_chap_head() +{ + atf_set "descr" "Does simple chap tests" + atf_set "require.progs" "rump_server pppoectl" +} + +pppoe_chap_body() +{ + run_test chap +} + +pppoe_chap_cleanup() +{ + cleanup +} + +run_test6() +{ + local auth=$1 + setup "inet=false" + + # As pppoe client doesn't support rechallenge yet. + local server_optparam="" + if [ $auth = "chap" ]; then + server_optparam="norechallenge" + fi + + export RUMP_SERVER=$SERVER + local setup_serverparam="pppoectl pppoe0 hisauthproto=$auth \ + 'hisauthname=$AUTHNAME' \ + 'hisauthsecret=$SECRET' \ + 'myauthproto=none' \ + $server_optparam" + atf_check -s exit:0 -x "$HIJACKING $setup_serverparam" + atf_check -s exit:0 rump.ifconfig pppoe0 inet6 $SERVER_IP6/64 down + atf_check -s exit:0 rump.ifconfig pppoe0 up + unset RUMP_SERVER + + export RUMP_SERVER=$CLIENT + local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ + 'myauthname=$AUTHNAME' \ + 'myauthsecret=$SECRET' \ + 'hisauthproto=none'" + atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" + atf_check -s exit:0 rump.ifconfig pppoe0 inet6 $CLIENT_IP6/64 down + atf_check -s exit:0 rump.ifconfig pppoe0 up + $DEBUG && rump.ifconfig + wait_for_session_established + atf_check -s exit:0 -o ignore rump.ifconfig -w 10 + export RUMP_SERVER=$SERVER + atf_check -s exit:0 -o ignore rump.ifconfig -w 10 + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 -o ignore rump.ping6 -c 1 -X $TIMEOUT $SERVER_IP6 + unset RUMP_SERVER + + # test for disconnection from server + export RUMP_SERVER=$SERVER + session_id=`$HIJACKING pppoectl -d pppoe0 | grep state` + atf_check -s exit:0 rump.ifconfig pppoe0 down + wait_for_disconnected + export RUMP_SERVER=$CLIENT + wait_for_disconnected + atf_check -s not-exit:0 -o ignore -e ignore \ + rump.ping6 -c 1 -X $TIMEOUT $SERVER_IP6 + atf_check -s exit:0 -o not-match:"$session_id" -x "$HIJACKING pppoectl -d pppoe0" + unset RUMP_SERVER + + # test for recoonecting + export RUMP_SERVER=$SERVER + atf_check -s exit:0 rump.ifconfig pppoe0 up + wait_for_session_established + atf_check -s exit:0 rump.ifconfig -w 10 + $DEBUG && $HIJACKING pppoectl -d pppoe0 + $DEBUG && rump.ifconfig pppoe0 + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 -o ignore rump.ifconfig -w 10 + atf_check -s exit:0 -o ignore rump.ping6 -c 1 -X $TIMEOUT $SERVER_IP6 + unset RUMP_SERVER + + # test for disconnection from client + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 rump.ifconfig pppoe0 down + wait_for_disconnected + + export RUMP_SERVER=$SERVER + wait_for_disconnected + $DEBUG && $HIJACKING pppoectl -d pppoe0 + atf_check -s not-exit:0 -o ignore -e ignore \ + rump.ping6 -c 1 -X $TIMEOUT $CLIENT_IP6 + atf_check -s exit:0 -o match:'initial' -x "$HIJACKING pppoectl -d pppoe0" + unset RUMP_SERVER + + # test for reconnecting + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 rump.ifconfig pppoe0 up + wait_for_session_established + atf_check -s exit:0 rump.ifconfig -w 10 + + $DEBUG && rump.ifconfig pppoe0 + $DEBUG && $HIJACKING pppoectl -d pppoe0 + unset RUMP_SERVER + + export RUMP_SERVER=$SERVER + atf_check -s exit:0 rump.ifconfig -w 10 + atf_check -s exit:0 -o ignore rump.ping6 -c 1 -X $TIMEOUT $CLIENT_IP6 + atf_check -s exit:0 -o match:'session' -x "$HIJACKING pppoectl -d pppoe0" + $DEBUG && HIJACKING pppoectl -d pppoe0 + unset RUMP_SERVER + + # test for invalid password + export RUMP_SERVER=$CLIENT + atf_check -s exit:0 rump.ifconfig pppoe0 down + wait_for_disconnected + local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ + 'myauthname=$AUTHNAME' \ + 'myauthsecret=invalidsecret' \ + 'hisauthproto=none'" + atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" + atf_check -s exit:0 rump.ifconfig pppoe0 up + wait_for_session_established dontfail + atf_check -s not-exit:0 -o ignore -e ignore \ + rump.ping6 -c 1 -X $TIMEOUT $SERVER_IP6 + atf_check -s exit:0 -o match:'DETACHED' rump.ifconfig pppoe0 + unset RUMP_SERVER +} + +atf_test_case pppoe6_pap cleanup + +pppoe6_pap_head() +{ + atf_set "descr" "Does simple pap using IPv6 tests" + atf_set "require.progs" "rump_server pppoectl" +} + +pppoe6_pap_body() +{ + run_test6 pap +} + +pppoe6_pap_cleanup() +{ + cleanup +} + +atf_test_case pppoe6_chap cleanup + +pppoe6_chap_head() +{ + atf_set "descr" "Does simple chap using IPv6 tests" + atf_set "require.progs" "rump_server pppoectl" +} + +pppoe6_chap_body() +{ + run_test6 chap +} + +pppoe6_chap_cleanup() +{ + cleanup +} + +atf_init_test_cases() +{ + atf_add_test_case pppoe_pap + atf_add_test_case pppoe_chap + atf_add_test_case pppoe6_pap + atf_add_test_case pppoe6_chap +} |
