diff options
Diffstat (limited to 'contrib/libpam/doc/pam_appl.sgml')
-rw-r--r-- | contrib/libpam/doc/pam_appl.sgml | 1567 |
1 files changed, 1567 insertions, 0 deletions
diff --git a/contrib/libpam/doc/pam_appl.sgml b/contrib/libpam/doc/pam_appl.sgml new file mode 100644 index 0000000..7c4170a --- /dev/null +++ b/contrib/libpam/doc/pam_appl.sgml @@ -0,0 +1,1567 @@ +<!doctype linuxdoc system> + +<!-- + + $Id: pam_appl.sgml,v 1.16 1997/04/05 06:49:14 morgan Exp morgan $ + + Copyright (C) Andrew G. Morgan 1996, 1997. All rights reserved. + +Redistribution and use in source (sgml) and binary (derived) forms, +with or without modification, are permitted provided that the +following conditions are met: + +1. Redistributions of source code must retain the above copyright + notice, and the entire permission notice in its entirety, + including the disclaimer of warranties. + +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + +3. The name of the author may not be used to endorse or promote + products derived from this software without specific prior + written permission. + +ALTERNATIVELY, this product may be distributed under the terms of the +GNU General Public License, in which case the provisions of the GNU +GPL are required INSTEAD OF the above restrictions. (This clause is +necessary due to a potential bad interaction between the GNU GPL and +the restrictions contained in a BSD-style copyright.) + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED +WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH +DAMAGE. + + --> + +<article> + +<title>The Linux-PAM Application Developers' Guide +<author>Andrew G. Morgan, <tt>morgan@linux.kernel.org</tt> +<date>DRAFT v0.63 1998/1/18 +<abstract> +This manual documents what an application developer needs to know +about the <bf>Linux-PAM</bf> library. It describes how an application +might use the <bf>Linux-PAM</bf> library to authenticate users. In +addition it contains a description of the funtions to be found in +<tt/libpam_misc/ library, that can be used in general applications. +Finally, it contains some comments on PAM related security issues for +the application developer. +</abstract> + +<toc> + +<sect>Introduction + +<sect1>Synopsis + +<p> +For general applications that wish to use the services provided by +<bf/Linux-PAM/ the following is a summary of the relevant linking +information: +<tscreen> +<verb> +#include <security/pam_appl.h> + +cc -o application .... -lpam +</verb> +</tscreen> + +<p> +In addition to <tt/libpam/, there is a library of miscellaneous +functions that make the job of writing <em/PAM-aware/ applications +easier (this library is not covered in the DCE-RFC for PAM and is +specific to the Linux-PAM distribution): +<tscreen> +<verb> +... +#include <security/pam_misc.h> + +cc -o application .... -lpam -lpam_misc +</verb> +</tscreen> + +<sect1> Description + +<p> +<bf>Linux-PAM</bf> (Pluggable Authentication Modules for Linux) is a +library that enables the local system administrator to choose how +individual applications authenticate users. For an overview of the +<bf>Linux-PAM</bf> library see the <bf/Linux-PAM/ System +Administrators' Guide. + +<p> +It is the purpose of the <bf>Linux-PAM</bf> project to liberate the +development of privilege granting software from the development of +secure and appropriate authentication schemes. This is accomplished +by providing a documented library of functions that an application may +use for all forms of user authentication management. This library +dynamically loads locally configured authentication modules that +actually perform the authentication tasks. + +<p> +From the perspective of an application developer the information +contained in the local configuration of the PAM library should not be +important. Indeed it is intended that an application treat the +functions documented here as a ``black box'' that will deal with all +aspects of user authentication. ``All aspects'' includes user +verification, account management, session initialization/termination +and also the resetting of passwords (<em/authentication tokens/). + +<sect>Overview + +<p> +Most service-giving applications are restricted. In other words, +their service is not available to all and every prospective client. +Instead, the applying client must jump through a number of hoops to +convince the serving application that they are authorized to obtain +service. + +The process of <em/authenticating/ a client is what PAM is designed to +manage. In addition to authentication, PAM provides account +management, credential management, session management and +authentication-token (password changing) management services. It is +important to realize when writing a PAM based application that these +services are provided in a manner that is <bf>transparent</bf> to the +the application. That is to say, when the application is written, no +assumptions can be made about <em>how</em> the client will be +authenticated. + +<p> +The process of authentication is performed by the PAM library via a +call to <tt>pam_authenticate()</tt>. The return value of this +function will indicate whether a named client (the <em>user</em>) has +been authenticated. If the PAM library needs to prompt the user for +any information, such as their <em>name</em> or a <em>password</em> +then it will do so. If the PAM library is configured to authenticate +the user using some silent protocol, it will do this too. (This +latter case might be via some hardware interface for example.) + +<p> +It is important to note that the application must leave all decisions +about when to prompt the user at the discretion of the PAM library. + +<p> +The PAM library, however, must work equally well for different styles +of application. Some applications, like the familiar <tt>login</tt> +and <tt>passwd</tt> are terminal based applications, exchanges of +information with the client in these cases is as plain text messages. +Graphically based applications, however, have a more sophisticated +interface. They generally interact with the user via specially +constructed dialogue boxes. Additionally, network based services +require that text messages exchanged with the client are specially +formatted for automated processing: one such example is <tt>ftpd</tt> +which prefixes each exchanged message with a numeric identifier. + +<p> +The presentation of simple requests to a client is thus something very +dependent on the protocol that the serving application will use. In +spite of the fact that PAM demands that it drives the whole +authentication process, it is not possible to leave such protocol +subtleties up to the PAM library. To overcome this potential problem, +the application provides the PAM library with a <em>conversation</em> +function. This function is called from <bf>within</bf> the PAM +library and enables the PAM to directly interact with the client. The +sorts of things that this conversation function must be able to do are +prompt the user with text and/or obtain textual input from the user +for processing by the PAM library. The details of this function are +provided in a later section. + +<p> +For example, the conversation function may be called by the PAM library +with a request to prompt the user for a password. Its job is to +reformat the prompt request into a form that the client will +understand. In the case of <tt>ftpd</tt>, this will involve prefixing +the string with the number <tt>331</tt> and sending the request over +the network to a connected client. The conversation function will +then obtain any reply and, after extracting the typed password, will +return this string of text to the PAM library. Similar concerns need +to be addressed in the case of an X-based graphical server. + +<p> +There are a number of issues that need to be addressed when one is +porting an existing application to become PAM compliant. A section +below has been devoted to this: Porting legacy applications. + +<p> +Besides authentication, PAM provides other forms of management. +Session management is provided with calls to +<tt>pam_open_session()</tt> and <tt>pam_close_session()</tt>. What +these functions actually do is up to the local administrator. But +typically, they could be used to log entry and exit from the system or +for mounting and unmounting the user's home directory. If an +application provides continuous service for a period of time, it +should probably call these functions, first open after the user is +authenticated and then close when the service is terminated. + +<p> +Account management is another area that an application developer +should include with a call to <tt/pam_acct_mgmt()/. This call will +perform checks on the good health of the user's account (has it +expired etc.). One of the things this function may check is whether +the user's authentication token has expired - in such a case the +application may choose to attempt to update it with a call to +<tt/pam_chauthtok()/, although some applications are not suited to +this task (<em>ftp</em> for example) and in this case the application +should deny access to the user. + +<p> +PAM is also capable of setting and deleting the users credentials with +the call <tt>pam_setcred()</tt>. This function should always be +called after the user is authenticated and before service is offered +to the user. By convention, this should be the last call to the PAM +library before service is given to the user. What exactly a +credential is, is not well defined. However, some examples are given +in the glossary below. + +<sect>The public interface to <bf>Linux-PAM</bf> + +<p> +Firstly, the relevant include file for the <bf>Linux-PAM</bf> library +is <tt><security/pam_appl.h></tt>. It contains the definitions +for a number of functions. After listing these functions, we collect +some guiding remarks for programmers. + +<sect1>What can be expected by the application + +<p> +Here we document those functions in the <bf/Linux-PAM/ library that +may be called from an application. + +<sect2>Initialization of Linux-PAM +<label id="pam-start-section"> + +<p> +<tscreen> +<verb> +extern int pam_start(const char *service_name, const char *user, + const struct pam_conv *pam_conversation, + pam_handle_t **pamh); +</verb> +</tscreen> + +<p> +This is the first of the <bf>Linux-PAM</bf> functions that must be +called by an application. It initializes the interface and reads the +system configuration file, <tt>/etc/pam.conf</tt> (see the +<bf/Linux-PAM/ System Administrators' Guide). Following a successful +return (<tt/PAM_SUCCESS/) the contents of <tt/*pamh/ is a handle that +provides continuity for successive calls to the <bf/Linux-PAM/ +library. The arguments expected by <tt/pam_start/ are as follows: the +<tt/service_name/ of the program, the <tt/user/name of the individual +to be authenticated, a pointer to an application-supplied +<tt/pam_conv/ structure and a pointer to a <tt/pam_handle_t/ +<em/pointer/. + +<p> +The <tt>pam_conv</tt> structure is discussed more fully in the section +<ref id="the-conversation-function" name="below">. The +<tt>pam_handle_t</tt> is a <em>blind</em> structure and the +application should not attempt to probe it directly for information. +Instead the <bf>Linux-PAM</bf> library provides the functions +<tt>pam_set_item</tt> and <tt>pam_get_item</tt>. These functions are +documented below. + +<sect2>Termination of the library +<label id="pam-end-section"> + +<p> +<tscreen> +<verb> +extern int pam_end(pam_handle_t *pamh, int pam_status); +</verb> +</tscreen> + +<p> +This function is the last function an application should call in the +<bf>Linux-PAM</bf> library. Upon return the handle <tt/pamh/ is no +longer valid and all memory associated with it will be invalid (likely +to cause a segmentation fault if accessed). + +<p> +Under normal conditions the argument <tt/pam_status/ has the value +PAM_SUCCESS, but in the event of an unsuccessful service application +the approprite <bf/Linux-PAM/ error-return value should be used +here. +attempt its purpose is to be passed as an argument to the +module specific function <tt/cleanup()/ (see the <bf/Linux-PAM/ +<htmlurl url="pam_modules.html" name="Module Developers' Guide">). + +<sect2>Setting PAM items +<label id="pam-set-item-section"> + +<p> +<tscreen> +<verb> +extern int pam_set_item(pam_handle_t *pamh, int item_type, + const void *item); +</verb> +</tscreen> + +<p>This function is used to (re)set the value of one of the following +<bf/item_type/s: + +<p><descrip> +<tag><tt/PAM_SERVICE/</tag> + The service name + +<tag><tt/PAM_USER/</tag> + The user name + +<tag><tt/PAM_TTY/</tag> + The terminal name: prefixed by <tt>/dev/</tt> if it is a +device file; for graphical, X-based, applications the value for this +item should be the <tt/$DISPLAY/ variable. + +<tag><tt/PAM_RHOST/</tag> + The remote host name + +<tag><tt/PAM_CONV/</tag> + The conversation structure (see section <ref +id="the-conversation-function" name="below">) + +<tag><tt/PAM_RUSER/</tag> + The remote user name + +<tag><tt/PAM_USER_PROMPT/</tag> + The string used when prompting for a user's name. The default +value for this string is ``Please enter username: ''. + +</descrip> + +<p> +For all <tt/item_type/s, other than <tt/PAM_CONV/, <tt/item/ is a +pointer to a <tt><NUL></tt> terminated character string. In the +case of <tt/PAM_CONV/, <tt/item/ points to an initialized +<tt/pam_conv/ structure (see section <ref +id="the-conversation-function" name="below">). + +<p> +A successful call to this function returns <tt/PAM_SUCCESS/. However, +the application should expect one of the following errors: + +<p> +<descrip> +<tag><tt/PAM_PERM_DENIED/</tag> + An attempt was made to replace the conversation structure with +a <tt/NULL/ value. +<tag><tt/PAM_BUF_ERR/</tag> + The function ran out of memory making a copy of the item. +<tag><tt/PAM_BAD_ITEM/</tag> + The application attempted to set an undefined item. +</descrip> + +<sect2>Getting PAM items +<label id="pam-get-item-section"> + +<p> +<tscreen> +<verb> +extern int pam_get_item(const pam_handle_t *pamh, int item_type, + const void **item); +</verb> +</tscreen> + +<p> +This function is used to obtain the value of the indicated +<tt/item_type/. Upon successful return, <tt/*item/ contains a pointer +to the value of the corresponding item. Note, this is a pointer to +the <em/actual/ data and should <em/not/ be <tt/free()/'ed or +over-written! A successful call is signaled by a return value of +<tt/PAM_SUCCESS/. If an attempt is made to get an undefined item, +<tt/PAM_BAD_ITEM/ is returned. + +<sect2>Understanding errors +<label id="pam-strerror-section"> + +<p> +<tscreen> +<verb> +extern const char *pam_strerror(pam_handle_t *pamh, int errnum); +</verb> +</tscreen> + +<p> +This function returns some text describing the <bf>Linux-PAM</bf> +error associated with the argument <tt/errnum/. If the error is not +recognized ``<tt/Unknown Linux-PAM error/'' is returned. + +<sect2>Planning for delays + +<p> +<tscreen> +<verb> +extern int pam_fail_delay(pam_handle_t *pamh, unsigned int micro_sec); +</verb> +</tscreen> + +<p> +This function is offered by <bf/Linux-PAM/ to facilitate time delays +following a failed call to <tt/pam_authenticate()/ and before control +is returned to the application. When using this function the +application programmer should check if it is available with, +<tscreen> +<verb> +#ifdef HAVE_PAM_FAIL_DELAY + .... +#endif /* HAVE_PAM_FAIL_DELAY */ +</verb> +</tscreen> + + +<p> +Generally, an application requests that a user is authenticated by +<bf/Linux-PAM/ through a call to <tt/pam_authenticate()/ or +<tt/pam_chauthtok()/. These functions calls each of the <em/stacked/ +authentication modules listed in the <tt>/etc/pam.conf</tt> file. As +directed by this file, one of more of the modules may fail causing the +<tt/pam_...()/ call to return an error. It is desirable for there to +also be a pause before the application continues. The principal reason +for such a delay is security: a delay acts to discourage <em/brute +force/ dictionary attacks primarily, but also helps hinder +<em/timed/ (covert channel) attacks. + +<p> +The <tt/pam_fail_delay()/ function provides the mechanism by which an +application or module can suggest a minimum delay (of <tt/micro_sec/ +<em/micro-seconds/). <bf/Linux-PAM/ keeps a record of the longest time +requested with this function. Should <tt/pam_authenticate()/ fail, +the failing return to the application is delayed by an amount of time +randomly distributed (by up to 25%) about this longest value. + +<p> +Independent of success, the delay time is reset to its zero default +value when <bf/Linux-PAM/ returns control to the application. + +<sect2>Authenticating the user + +<p> +<tscreen> +<verb> +extern int pam_authenticate(pam_handle_t *pamh, int flags); +</verb> +</tscreen> + +<p> +This function serves as an interface to the authentication mechanisms +of the loaded modules. The single <em/optional/ flag, which may be +logically OR'd with <tt/PAM_SILENT/, takes the following value, + +<p><descrip> + +<tag><tt/PAM_DISALLOW_NULL_AUTHTOK/</tag> + Instruct the authentication modules to return +<tt/PAM_AUTH_ERR/ if the user does not have a registered +authorization token---it is set to <tt/NULL/ in the system database. +</descrip> + +<p> +The value returned by this function is one of the following: + +<p><descrip> + +<tag><tt/PAM_AUTH_ERR/</tag> + The user was not authenticated +<tag><tt/PAM_CRED_INSUFFICIENT/</tag> + For some reason the application does not have sufficient +credentials to authenticate the user. +<tag><tt/PAM_AUTHINFO_UNAVAIL/</tag> + The modules were not able to access the authentication +information. This might be due to a network or hardware failure etc. +<tag><tt/PAM_USER_UNKNOWN/</tag> + The supplied username is not known to the authentication +service +<tag><tt/PAM_MAXTRIES/</tag> + One or more of the authentication modules has reached its +limit of tries authenticating the user. Do not try again. + +</descrip> + +<p> +If one or more of the authentication modules fails to load, for +whatever reason, this function will return <tt/PAM_ABORT/. + +<sect2>Setting user credentials +<label id="pam-setcred-section"> + +<p> +<tscreen> +<verb> +extern int pam_setcred(pam_handle_t *pamh, int flags); +</verb> +</tscreen> + +<p> +This function is used to set the module-specific credentials of the +user. It is usually called after the user has been authenticated, +after the account management function has been called and after a +session has been opened for the user. + +<p> +A credential is something that the user possesses. It is some +property, such as a <em>Kerberos</em> ticket, or a supplementary group +membership that make up the uniqueness of a given user. On a Linux +(or UN*X system) the user's <tt>UID</tt> and <tt>GID</tt>'s are +credentials too. However, it has been decided that these properties +(along with the default supplementary groups of which the user is a +member) are credentials that should be set directly by the application +and not by PAM. + +<p> +This function simply calls the <tt/pam_sm_setcred/ functions of each +of the loaded modules. Valid <tt/flags/, any one of which, may be +logically OR'd with <tt/PAM_SILENT/, are: + +<p><descrip> +<tag><tt/PAM_ESTABLISH_CRED/</tag> + Set the credentials for the authentication service, +<tag><tt/PAM_DELETE_CRED/</tag> + Delete the credentials associated with the authentication service, +<tag><tt/PAM_REINITIALIZE_CRED/</tag> + Reinitialize the user credentials, and +<tag><tt/PAM_REFRESH_CRED/</tag> + Extend the lifetime of the user credentials. +</descrip> + +<p> +A successful return is signalled with <tt/PAM_SUCCESS/. Errors that +are especially relevant to this function are the following: + +<p><descrip> +<tag><tt/PAM_CRED_UNAVAIL/</tag> + A module cannot retrieve the user's credentials. +<tag><tt/PAM_CRED_EXPIRED/</tag> + The user's credentials have expired. +<tag><tt/PAM_USER_UNKNOWN/</tag> + The user is not known to an authentication module. +<tag><tt/PAM_CRED_ERR/</tag> + A module was unable to set the credentials of the user. +</descrip> + +<sect2>Account management + +<p> +<tscreen> +<verb> +extern int pam_acct_mgmt(pam_handle_t *pamh, int flags); +</verb> +</tscreen> + +<p> +This function is typically called after the user has been +authenticated. It establishes whether the user's account is healthy. +That is to say, whether the user's account is still active and whether +the user is permitted to gain access to the system at this time. +Valid flags, any one of which, may be logically OR'd with +<tt/PAM_SILENT/, and are the same as those applicable to the +<tt/flags/ argument of <tt/pam_authenticate/. + +<p> +This function simply calls the corresponding functions of each of the +loaded modules, as instructed by the configuration file, +<tt>/etc/pam.conf</tt>. + +<p> +The normal response from this function is <tt/PAM_SUCCESS/, however, +specific failures are indicated by the following error returns: + +<descrip> +<tag><tt/PAM_AUTHTOKEN_REQD/</tag> +The user <bf/is/ valid but their authentication token has +<em/expired/. The correct response to this return-value is to require +that the user satisfies the <tt/pam_chauthtok()/ function before +obtaining service. It may not be possible for some applications to do +this. In such cases, the user should be denied access until such time +as they can update their password. + +<tag><tt/PAM_ACCT_EXPIRED/</tag> + The user is no longer permitted access to the system. +<tag><tt/PAM_AUTH_ERR/</tag> + There was an authentication error. + +<tag><tt/PAM_PERM_DENIED/</tag> + The user is not permitted to gain access at this time. +<tag><tt/PAM_USER_UNKNOWN/</tag> + The user is not known to a module's account management +component. + +</descrip> + +<sect2>Updating authentication tokens +<label id="pam-chauthtok-section"> + +<p> +<tscreen> +<verb> +extern int pam_chauthtok(pam_handle_t *pamh, const int flags); +</verb> +</tscreen> + +<p> +This function is used to change the authentication token for a given +user (as indicated by the state associated with the handle, +<tt/pamh/). The following is a valid but optional flag which may be +logically OR'd with <tt/PAM_SILENT/, + +<descrip> +<tag><tt/PAM_CHANGE_EXPIRED_AUTHTOK/</tag> + This argument indicates to the modules that the users +authentication token (password) should only be changed if it has +expired. +</descrip> + +<p> +Note, if this argument is not passed, the application requires that +<em/all/ authentication tokens are to be changed. + +<p> +<tt/PAM_SUCCESS/ is the only successful return value, valid +error-returns are: + +<descrip> +<tag><tt/PAM_AUTHTOK_ERR/</tag> + A module was unable to obtain the new authentication token. + +<tag><tt/PAM_AUTHTOK_RECOVERY_ERR/</tag> + A module was unable to obtain the old authentication token. + +<tag><tt/PAM_AUTHTOK_LOCK_BUSY/</tag> + One or more of the modules was unable to change the +authentication token since it is currently locked. + +<tag><tt/PAM_AUTHTOK_DISABLE_AGING/</tag> + Authentication token aging has been disabled for at least one +of the modules. + +<tag><tt/PAM_PERM_DENIED/</tag> + Permission denied. + +<tag><tt/PAM_TRY_AGAIN/</tag> + Not all of the modules were in a position to update the +authentication token(s). In such a case none of the user's +authentication tokens are updated. + +<tag><tt/PAM_USER_UNKNOWN/</tag> + The user is not known to the authentication token changing +service. + +</descrip> + +<sect2>Session initialization +<label id="pam-open-session-section"> + +<p> +<tscreen> +<verb> +extern int pam_open_session(pam_handle_t *pamh, int flags); +</verb> +</tscreen> + +<p> +This function is used to indicate that an authenticated session has +begun. It is used to inform the module that the user is currently in +a session. It should be possible for the <bf>Linux-PAM</bf> library +to open a session and close the same session (see section <ref +id="pam-close-session-section" name="below">) from different +applications. + +<p> +Currently, this function simply calls each of the corresponding +functions of the loaded modules. The only valid flag is +<tt/PAM_SILENT/ and this is, of course, <em/optional/. + +<p> +If any of the <em/required/ loaded modules are unable to open a +session for the user, this function will return <tt/PAM_SESSION_ERR/. + +<sect2>Terminating sessions +<label id="pam-close-session-section"> + +<p> +<tscreen> +<verb> +extern int pam_close_session(pam_handle_t *pamh, int flags); +</verb> +</tscreen> + +<p> +This function is used to indicate that an authenticated session has +ended. It is used to inform the module that the user is exiting a +session. It should be possible for the <bf>Linux-PAM</bf> library to +open a session and close the same session from different applications. + +<p> +Currently, this function simply calls each of the corresponding +functions of the loaded modules. The only valid flag is +<tt/PAM_SILENT/ and this is, of course, <em/optional/. + +<p> +If any of the <em/required/ loaded modules are unable to close a +session for the user, this function will return <tt/PAM_SESSION_ERR/. + +<sect2>Setting PAM environment variables +<label id="pam-putenv-section"> + +<p> +<tscreen> +<verb> +extern int pam_putenv(pam_handle_t *pamh, const char *name_value); +</verb> +</tscreen> + +<p> +<em> +Warning, the environment support in <bf/Linux-PAM/ is based solely +on a six line email from the developers at Sun. Its interface is +likely to be generally correct, however, the details are likely to be +changed as more information becomes available. +</em> + +<p> +This function attempts to (re)set a <bf/Linux-PAM/ environment +variable. The <tt/name_value/ argument is a single <tt/NUL/ terminated +string of one of the following forms: +<descrip> +<tag>``<tt/NAME=value of variable/''</tag> + +In this case the environment variable of the given <tt/NAME/ is set to +the indicated value: ``<tt/value of variable/''. If this variable is +already known, it is overwritten. Otherwise it is added to the +<bf/Linux-PAM/ environment. + +<tag>``<tt/NAME=/''</tag> + +This function sets the variable to an empty value. It is listed +separately to indicate that this is the correct way to achieve such a +setting. + +<tag>``<tt/NAME/''</tag> + +Without an `<tt/=/' the <tt/pam_putenv()/ function will delete the +correspoding variable from the <bf/Linux-PAM/ environment. + +</descrip> + +<p> +Success is indicated with a return value of <tt/PAM_SUCCESS/. Failure +is indicated by one of the following returns: + +<descrip> +<tag><tt/PAM_PERM_DENIED/</tag> + name given is a <tt/NULL/ pointer + +<tag><tt/PAM_BAD_ITEM/</tag> + variable requested (for deletion) is not currently set + +<tag><tt/PAM_ABORT/</tag> + the <bf/Linux-PAM/ handle, <tt/pamh/, is corrupt + +<tag><tt/PAM_BUF_ERR/</tag> + failed to allocate memory when attempting update + +</descrip> + +<sect2>Getting a PAM environment variable +<label id="pam-getenv-section"> + +<p> +<tscreen> +<verb> +extern const char *pam_getenv(pam_handle_t *pamh, const char *name); +</verb> +</tscreen> + +<p> +<em> +Warning, the environment support in <bf/Linux-PAM/ is based solely +on a six-line email from the developers at Sun. Its interface is +likely to be generally correct, however, the details are likely to be +changed as more information becomes available. +</em> + +<p> +Obtain the value of the indicated <bf/Linux-PAM/ environment +variable. On error, internal failure or the unavailability of the +given variable (unspecified), this function simply returns <tt/NULL/. + +<sect2>Getting the PAM environment +<label id="pam-getenvlist-section"> + +<p> +<tscreen> +<verb> +extern const char * const *pam_getenvlist(pam_handle_t *pamh); +</verb> +</tscreen> + +<p> +<em> +Warning, the environment support in <bf/Linux-PAM/ is based solely +on a six line email from the developers at Sun. Its interface is +likely to be generally correct, however, the details are likely to be +changed as more information becomes available. +</em> + +<p> +This function returns a pointer to the complete <tt/Linux-PAM/ +environment. It is a pointer to a <em/read-only/ list of +<em/read-only/ environment variables. It should be noted that this +memory will become invalid after a call to <tt/pam_end()/ (see the +section <ref id="pam-end-section" name="above">). If application +wishes to make use of this list after such a call, it should first +make a copy of all the set variables. (A function that performs such a +transcription is to be found in <tt/libpam_misc/.) + +<sect1>What is expected of an application + +<sect2>The conversation function +<label id="the-conversation-function"> + +<p> +An application must provide a ``conversation function''. It is used +for direct communication between a loaded module and the application +and will typically provide a means for the module to prompt the user +for a password etc. . The structure, <tt/pam_conv/, is defined by +including <tt><security/pam_appl.h></tt>; to be, + +<p> +<tscreen> +<verb> +struct pam_conv { + int (*conv)(int num_msg, + const struct pam_message **msg, + struct pam_response **resp, + void *appdata_ptr); + void *appdata_ptr; +}; +</verb> +</tscreen> + +<p> +It is initialized by the application before it is passed to the +library. The <em/contents/ of this structure are attached to the +<tt/*pamh/ handle. The point of this argument is to provide a +mechanism for any loaded module to interact directly with the +application program. This is why it is called a <em/conversation/ +structure. + +<p> +When a module calls the referenced <tt/conv()/ function, the argument +<tt/*appdata_ptr/ is set to the second element of this structure. + +<p> +The other arguments of a call to <tt/conv()/ concern the information +exchanged by module and application. That is to say, <tt/num_msg/ +holds the length of the array of pointers, <tt/msg/. After a +successful return, the pointer <tt/*resp/ points to an array of +<tt/pam_response/ structures, holding the application supplied text. +Note, <tt/*resp/ is an <tt/struct pam_response/ array and <em/not/ an +array of pointers. + +<p> +The message (from the module to the application) passing structure is +defined by <tt><security/pam_appl.h></tt> as: + +<p> +<tscreen> +<verb> +struct pam_message { + int msg_style; + const char *msg; +}; +</verb> +</tscreen> + +<p> +Valid choices for <tt/msg_style/ are: + +<p><descrip> +<tag><tt/PAM_PROMPT_ECHO_OFF/</tag> + Obtain a string without echoing any text +<tag><tt/PAM_PROMPT_ECHO_ON/</tag> + Obtain a string whilst echoing text +<tag><tt/PAM_ERROR_MSG/</tag> + Display an error +<tag><tt/PAM_TEXT_INFO/</tag> + Display some text. +</descrip> + +<p> +The point of having an array of messages is that it becomes possible +to pass a number of things to the application in a single call from +the module. It can also be convenient for the application that related +things come at once: a windows based application can then present a +single form with many messages/prompts on at once. + +<p> +The response (from the application to the module) passing structure is +defined by including <tt><security/pam_appl.h></tt> as: + +<p><tscreen><verb> +struct pam_response { + char *resp; + int resp_retcode; +}; +</verb></tscreen> + +<p> +Currently, there are no definitions for <tt/resp_retcode/ values; the +normal value is <tt/0/. + +<p> +Prior to the 0.59 release of Linux-PAM, the length of the returned +<tt/pam_response/ array was equal to the number of <em/prompts/ (types +<tt/PAM_PROMPT_ECHO_OFF/ and <tt/PAM_PROMPT_ECHO_ON/) in the +<tt/pam_message/ array with which the conversation function was +called. This meant that it was not always necessary for the module to +<tt/free(3)/ the responses if the conversation function was only used +to display some text. + +<p> +Post Linux-PAM-0.59 (and in the interests of compatibility with +Sunsoft). The number of resposes is always equal to the <tt/num_msg/ +conversation function argument. This is slightly easier to program +but does require that the response array is <tt/free(3)/'d after every +call to the conversation function. The index of the responses +corresponds directly to the prompt index in the <tt/pam_message/ +array. + +<p> +The maximum length of the <tt/pam_msg.msg/ and <tt/pam_response.resp/ +character strings is <tt/PAM_MAX_MSG_SIZE/. (This is not enforced by +Linux-PAM.) + +<p> +<tt/PAM_SUCCESS/ is the expected return value of this +function. However, should an error occur the application should not +set <tt/*resp/ but simply return <tt/PAM_CONV_ERR/. + +<p> +Note, if an application wishes to use two conversation functions, it +should activate the second with a call to <tt/pam_set_item()/. + +<p> +<bf>Notes:</bf> New item types are being added to the conversation +protocol. Currently Linux-PAM supports: <tt>PAM_BINARY_PROMPT</tt> +and <tt>PAM_BINARY_MSG</tt>. These two are intended for server-client +hidden information exchange and may be used as an interface for +maching-machine authentication. + +<sect1>Programming notes + +<p> +Note, all of the authentication service function calls accept the +token <tt/PAM_SILENT/, which instructs the modules to not send +messages to the application. This token can be logically OR'd with any +one of the permitted tokens specific to the individual function calls. +<tt/PAM_SILENT/ does not override the prompting of the user for +passwords etc., it only stops informative messages from being +generated. + +<sect>Security issues of <bf>Linux-PAM</bf> + +<p> +A poorly (or maliciously) written application can defeat any +<bf/Linux-PAM/ module's authentication mechanisms by simply ignoring +it's return values. It is the applications task and responsibility to +grant privileges and access to services. The <bf/Linux-PAM/ library +simply assumes the responsibility of <em/authenticating/ the user; +ascertaining that the user <em/is/ who they say they are. Care should +be taken to anticipate all of the documented behavior of the +<bf/Linux-PAM/ library functions. A failure to do this will most +certainly lead to a future security breach. + +<sect1>Care about standard library calls + +<p> +In general, writers of authorization-granting applications should +assume that each module is likely to call any or <em/all/ `libc' +functions. For `libc' functions that return pointers to +static/dynamically allocated structures (ie. the library allocates the +memory and the user is not expected to `<tt/free()/' it) any module +call to this function is likely to corrupt a pointer previously +obtained by the application. The application programmer should either +re-call such a `libc' function after a call to the <bf/Linux-PAM/ +library, or copy the structure contents to some safe area of memory +before passing control to the <bf/Linux-PAM/ library. + +<p> +Two function classes that fall into this category are +<tt>getpwnam(3)</tt> and <tt>syslog(3)</tt>. + +<sect1>Choice of a service name + +<p> +When picking the <em/service-name/ that corresponds to the first entry +in the <tt>/etc/pam.conf</tt> file, the application programmer should +<bf/avoid/ the temptation of choosing something related to +<tt/argv[0]/. It is a trivial matter for any user to invoke any +application on a system under a different name -- this should not be +permitted to cause a security breach. + +<p> +To invoke some <tt/target/ application by another name, the user may +symbolically link the target application with the desired name. To be +precise all the user need do is, +<tscreen> +<verb> +ln -s /target/application ./preferred_name +</verb> +</tscreen> +and then <em/run/ <tt>./preferred_name</tt> + +<p> +By studying the <bf/Linux-PAM/ configuration file, +<tt>/etc/pam.conf</tt>, an attacker can choose the <tt/preferred_name/ +to be that of a service enjoying minimal protection; for example a +game which uses <bf/Linux-PAM/ to restrict access to certain hours of +the day. If the service-name were to be linked to the filename under +which the service was invoked, it is clear that the user is +effectively in the position of dictating which authentication scheme +the service uses. Needless to say, this is not a secure situation. + +<p> +The conclusion is that the application developer should carefully +define the service-name of an application. The safest thing is to make +it a single hard-wired name. + +<sect1>The conversation function + +<p> +Care should be taken to ensure that the <tt/conv()/ function is +robust. Such a function is provided in the library <tt/libpam_misc/ +(see <ref id="libpam-misc-section" name="below">). + +<sect1>The identity of the user + +<p> +The <bf/Linux-PAM/ modules will need to determine the identity of the +user who requests a service, and the identity of the user who grants +the service. These two users will seldom be the same. Indeed there +is generally a third user identity to be considered, the new (assumed) +identity of the user once the service is granted. + +<p> +The need for keeping tabs on these identities is clearly an issue of +security. Basically, the identity of the user requesting a service +should be the current <tt/uid/ (userid) of the running process; the +identity of the privilege granting user is the <tt/euid/ (effective +userid) of the running process; the identity of the user, under whose +name the service will be executed, is given by the contents of the +<tt/PAM_USER/ <tt/pam_get_item(2)/. + +<p> +In addition the identity of a remote user, requesting the service from +a distant location, will be placed in the <tt/PAM_RUSER/ item. + +<sect1>Sufficient resources + +<p> +Care should be taken to ensure that the proper execution of an +application is not compromised by a lack of system resources. If an +application is unable to open sufficient files to perform its service, +it should fail gracefully, or request additional resources. +Specifically, the quantities manipulated by the <tt/setrlimit(2)/ +family of commands should be taken into consideration. + +<sect>A library of miscellaneous helper functions +<label id="libpam-misc-section"> + +<p> +To aid the work of the application developer a library of +miscellaneous functions is provided. It is called <tt/libpam_misc/, +and contains functions for allocating memory (securely), a text based +conversation function, and routines for enhancing the standard +PAM-environment variable support. + +<sect1>Requirements + +<p> +The functions, structures and macros, made available by this library +can be defined by including <tt><security/pam_misc.h></tt>. It +should be noted that this library is specific to <bf/Linux-PAM/ and is +not referred to in the defining DCE-RFC (see <ref id="bibliography" +name="the bibliography">) below. + +<sect1>Functions supplied + +<sect2>Safe string duplication + +<p> +<tscreen> +<verb> +extern char *xstrdup(const char *s) +</verb> +</tscreen> +Return a duplicate copy of the <tt/NUL/ terminated string, +<tt/s/. <tt/NULL/ is returned if there is insufficient memory +available for the duplicate or if <tt/s=NULL/. + +<sect2>A text based conversation function + +<p> +<tscreen> +<verb> +extern int misc_conv(int num_msg, const struct pam_message **msgm, + struct pam_response **response, void *appdata_ptr); +</verb> +</tscreen> + +<p> +This is a function that will prompt the user with the appropriate +comments and obtain the appropriate inputs as directed by +authentication modules. + +<p> +In addition to simply slotting into the appropriate <tt/struct +pam_conv/, this function provides some time-out facilities. The +function exports five variables that can be used by an application +programmer to limit the amount of time this conversation function will +spend waiting for the user to type something. + +<p> +The five variables are as follows: +<descrip> +<tag><tt>extern time_t pam_misc_conv_warn_time;</tt></tag> + +This variable contains the <em/time/ (as returned by <tt/time()/) that +the user should be first warned that the clock is ticking. By default +it has the value <tt/0/, which indicates that no such warning will be +given. The application may set its value to sometime in the future, +but this should be done prior to passing control to the <bf/Linux-PAM/ +library. + +<tag><tt>extern const char *pam_misc_conv_warn_line;</tt></tag> + +Used in conjuction with <tt/pam_misc_conv_warn_time/, this variable is +a pointer to the string that will be displayed when it becomes time to +warn the user that the timeout is approaching. Its default value is +``..\a.Time is running out...\n'', but this can be changed +by the application prior to passing control to <bf/Linux-PAM/. + +<tag><tt>extern time_t pam_misc_conv_die_time;</tt></tag> + +This variable contains the <em/time/ (as returned by <tt/time()/) that +the conversation will time out. By default it has the value <tt/0/, +which indicates that the conversation function will not timeout. The +application may set its value to sometime in the future, this should +be done prior to passing control to the <bf/Linux-PAM/ library. + +<tag><tt>extern const char *pam_misc_conv_die_line;</tt></tag> + +Used in conjuction with <tt/pam_misc_conv_die_time/, this variable is +a pointer to the string that will be displayed when the conversation +times out. Its default value is ``..\a.Sorry, your time is +up!\n'', but this can be changed by the application prior to +passing control to <bf/Linux-PAM/. + +<tag><tt>extern int pam_misc_conv_died;</tt></tag> + +Following a return from the <bf/Linux-PAM/ libraray, the value of this +variable indicates whether the conversation has timed out. A value of +<tt/1/ indicates the time-out occurred. + +<tag><tt>extern int (*pam_binary_handler_fn)(const union pam_u_packet_p send, + union pam_u_packet_p *receive);</tt></tag> + +This function pointer is initialized to <tt/NULL/ but can be filled +with a function that provides machine-machine (hidden) message +exchange. It is intended for use with hidden authentication protocols +such as RSA or Diffie-Hellman key exchanges. (This is still under +development.) + +</descrip> + +<sect2>Transcribing an environment to that of Linux-PAM +<p> +<tscreen> +<verb> +extern int pam_misc_paste_env(pam_handle_t *pamh, + const char * const * user_env); +</verb> +</tscreen> + +This function takes the supplied list of environment pointers and +<em/uploads/ its contents to the <bf/Linux-PAM/ environment. Success +is indicated by <tt/PAM_SUCCESS/. + +<sect2>Saving the Linux-PAM environment for later use +<p> +<tscreen> +<verb> +extern char **pam_misc_copy_env(pam_handle_t *pamh); +</verb> +</tscreen> + +This function returns a pointer to a list of environment variables +that are a direct copy of the <bf/Linux-PAM/ environment. The memory +associated with these variables are the responsibility of the +application and should be liberated with a call to +<tt/pam_misc_drop_env()/. + +<sect2>Liberating a locally saved environment +<p> +<tscreen> +<verb> +extern char **pam_misc_drop_env(char **env); +</verb> +</tscreen> + +This function is defined to complement the <tt/pam_misc_copy_env()/ +function. It liberates the memory associated with <tt/env/, +<em/overwriting/ with <tt/0/ all memory before <tt/free()/ing it. + +<sect2>BSD like Linux-PAM environment variable setting +<p> +<tscreen> +<verb> +extern int pam_misc_setenv(pam_handle_t *pamh, const char *name, + const char *value, int readonly); +</verb> +</tscreen> + +This function performs a task equivalent to <tt/pam_putenv()/, its +syntax is, however, more like the BSD style function; <tt/setenv()/. +The <tt/name/ and <tt/value/ are concatenated with an ``<tt/=/'' to +form a <tt/name_value/ and passed to <tt/pam_putenv()/. If, however, +the <bf/Linux-PAM/ variable is already set, the replacement will only +be applied if the last argument, <tt/readonly/, is zero. + +<sect>Porting legacy applications + +<p> +The following is extracted from an email. I'll tidy it up later. + +<p> +The point of PAM is that the application is not supposed to have any +idea how the attatched authentication modules will choose to +authenticate the user. So all they can do is provide a conversation +function that will talk directly to the user(client) on the modules' +behalf. + +<p> +Consider the case that you plug a retinal scanner into the login +program. In this situation the user would be prompted: "please look +into the scanner". No username or password would be needed - all this +information could be deduced from the scan and a database lookup. The +point is that the retinal scanner is an ideal task for a "module". + +<p> +While it is true that a pop-daemon program is designed with the POP +protocol in mind and no-one ever considered attatching a retinal +scanner to it, it is also the case that the "clean" PAM'ification of +such a daemon would allow for the possibility of a scanner module +being be attatched to it. The point being that the "standard" +pop-authentication protocol(s) [which will be needed to satisfy +inflexible/legacy clients] would be supported by inserting an +appropriate pam_qpopper module(s). However, having rewritten popd +once in this way any new protocols can be implemented in-situ. + +<p> +One simple test of a ported application would be to insert the +<tt/pam_permit/ module and see if the application demands you type a +password... In such a case, <tt/xlock/ would fail to lock the +terminal - or would at best be a screen-saver, ftp would give password +free access to all etc.. Neither of these is a very secure thing to +do, but they do illustrate how much flexibility PAM puts in the hands +of the local admin. + +<p> +The key issue, in doing things correctly, is identifying what is part +of the authentication procedure (how many passwords etc..) the +exchange protocol (prefixes to prompts etc., numbers like 331 in the +case of ftpd) and what is part of the service that the application +delivers. PAM really needs to have total control in the +authentication "proceedure", the conversation function should only +deal with reformatting user prompts and extracting responses from raw +input. + +<sect>Glossary of PAM related terms + +<p> +The following are a list of terms used within this document. + +<p> +<descrip> + +<tag>Authentication token</tag> +Generally, this is a password. However, a user can authenticate +him/herself in a variety of ways. Updating the user's authentication +token thus corresponds to <em>refreshing</em> the object they use to +authenticate themself with the system. The word password is avoided +to keep open the possibility that the authentication involves a +retinal scan or other non-textual mode of challenge/response. + +<tag>Credentials</tag> +Having successfully authenticated the user, PAM is able to establish +certain characteristics/attributes of the user. These are termed +<em>credentials</em>. Examples of which are group memberships to +perform privileged tasks with, and <em>tickets</em> in the form of +environment variables etc. . Some user-credentials, such as the +user's UID and GID (plus default group memberships) are not deemed to +be PAM-credentials. It is the responsibility of the application to +grant these directly. + +</descrip> + +<sect>An example application + +<p> +To get a flavor of the way a <tt/Linux-PAM/ application is written we +include the following example. It prompts the user for their password +and indicates whether their account is valid on the standard output, +its return code also indicates the success (<tt/0/ for success; <tt/1/ +for failure). + +<p> +<tscreen> +<verb> +/* + This program was contributed by Shane Watts + [modifications by AGM] + + You need to add the following (or equivalent) to the /etc/pam.conf file. + # check authorization + check_user auth required /usr/lib/security/pam_unix_auth.so + check_user account required /usr/lib/security/pam_unix_acct.so + */ + +#include <security/pam_appl.h> +#include <security/pam_misc.h> +#include <stdio.h> + +static struct pam_conv conv = { + misc_conv, + NULL +}; + +int main(int argc, char *argv[]) +{ + pam_handle_t *pamh=NULL; + int retval; + const char *user="nobody"; + + if(argc == 2) { + user = argv[1]; + } + + if(argc > 2) { + fprintf(stderr, "Usage: check_user [username]\n"); + exit(1); + } + + retval = pam_start("check_user", user, &ero;conv, &ero;pamh); + + if (retval == PAM_SUCCESS) + retval = pam_authenticate(pamh, 0); /* is user really user? */ + + if (retval == PAM_SUCCESS) + retval = pam_acct_mgmt(pamh, 0); /* permitted access? */ + + /* This is where we have been authorized or not. */ + + if (retval == PAM_SUCCESS) { + fprintf(stdout, "Authenticated\n"); + } else { + fprintf(stdout, "Not Authenticated\n"); + } + + if (pam_end(pamh,retval) != PAM_SUCCESS) { /* close Linux-PAM */ + pamh = NULL; + fprintf(stderr, "check_user: failed to release authenticator\n"); + exit(1); + } + + return ( retval == PAM_SUCCESS ? 0:1 ); /* indicate success */ +} +</verb> +</tscreen> + +<sect>Files + +<p><descrip> + +<tag><tt>/usr/include/security/pam_appl.h</tt></tag> + +header file for <bf/Linux-PAM/ applications interface + +<tag><tt>/usr/include/security/pam_misc.h</tt></tag> + +header file for useful library functions for making applications +easier to write + +<tag><tt>/usr/lib/libpam.so.*</tt></tag> + +the shared library providing applications with access to +<bf/Linux-PAM/. + +<tag><tt>/etc/pam.conf</tt></tag> + +the <bf/Linux-PAM/ configuration file. + +<tag><tt>/usr/lib/security/pam_*.so</tt></tag> + +the primary location for <bf/Linux-PAM/ dynamically loadable object +files; the modules. + +</descrip> + +<sect>See also +<label id="bibliography"> + +<p><itemize> + +<item>The <bf/Linux-PAM/ +<htmlurl url="pam.html" name="System Administrators' Guide">. + +<item>The <bf/Linux-PAM/ +<htmlurl url="pam_modules.html" name="Module Writers' Guide">. + +<item>The V. Samar and R. Schemers (SunSoft), ``UNIFIED LOGIN WITH +PLUGGABLE AUTHENTICATION MODULES'', Open Software Foundation Request +For Comments 86.0, October 1995. + +</itemize> + +<sect>Notes + +<p> +I intend to put development comments here... like ``at the moment +this isn't actually supported''. At release time what ever is in +this section will be placed in the Bugs section below! :) + +<p> +<itemize> + +<item> <tt/pam_strerror()/ should be internationalized.... + +<item> +Note, the <tt/resp_retcode/ of struct <tt/pam_message/, has no +purpose at the moment. Ideas/suggestions welcome! + +<item> more security issues are required.... + +</itemize> + +<sect>Author/acknowledgments + +<p> +This document was written by Andrew G. Morgan +(morgan@transmeta.com) with many contributions from +<!-- insert credits here --> +<!-- + an sgml list of people to credit for their contributions to Linux-PAM + $Id: CREDITS,v 1.4 1997/04/05 06:47:26 morgan Exp morgan $ + --> +Peter Allgeyer, +Tim Baverstock, +Craig S. Bell, +Derrick J. Brashear, +Ben Buxton, +Oliver Crow, +Chris Dent, +Marc Ewing, +Cristian Gafton, +Eric Hester, +Roger Hu, +Eric Jacksch, +Michael K. Johnson, +David Kinchlea, +Nicolai Langfeldt, +Elliot Lee, +Al Longyear, +Ingo Luetkebohle, +Marek Michalkiewicz, +Aleph One, +Martin Pool, +Sean Reifschneider, +Erik Troan, +Theodore Ts'o, +Jeff Uphoff, +Myles Uyema, +Savochkin Andrey Vladimirovich, +Ronald Wahl, +David Wood, +John Wilmes, +Joseph S. D. Yao +and +Alex O. Yuriev. + + +<p> +Thanks are also due to Sun Microsystems, especially to Vipin Samar and +Charlie Lai for their advice. At an early stage in the development of +<bf/Linux-PAM/, Sun graciously made the documentation for their +implementation of PAM available. This act greatly accelerated the +development of <bf/Linux-PAM/. + +<sect>Bugs/omissions + +<p> +This manual is hopelessly unfinished. Only a partial list of people is +credited for all the good work they have done. + +<sect>Copyright information for this document + +<p> +Copyright (c) Andrew G. Morgan 1996, 1997. All rights reserved. +<newline> +Email: <tt><morgan@transmeta.com></tt> + +<p> +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + +<p> +<itemize> + +<item> +1. Redistributions of source code must retain the above copyright + notice, and the entire permission notice in its entirety, + including the disclaimer of warranties. + +<item> +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + +<item> +3. The name of the author may not be used to endorse or promote + products derived from this software without specific prior + written permission. + +</itemize> + +<p> +<bf/Alternatively/, this product may be distributed under the terms of +the GNU General Public License (GPL), in which case the provisions of +the GNU GPL are required <bf/instead of/ the above restrictions. +(This clause is necessary due to a potential bad interaction between +the GNU GPL and the restrictions contained in a BSD-style copyright.) + +<p> +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED +WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH +DAMAGE. + +<p> +<tt>$Id: pam_appl.sgml,v 1.16 1997/04/05 06:49:14 morgan Exp morgan $</tt> + +</article> |