diff options
Diffstat (limited to 'contrib/gcc/config/alpha/elf.h')
| -rw-r--r-- | contrib/gcc/config/alpha/elf.h | 524 |
1 files changed, 524 insertions, 0 deletions
diff --git a/contrib/gcc/config/alpha/elf.h b/contrib/gcc/config/alpha/elf.h new file mode 100644 index 0000000..82f0410 --- /dev/null +++ b/contrib/gcc/config/alpha/elf.h @@ -0,0 +1,524 @@ +/* Definitions of target machine for GNU compiler, for DEC Alpha w/ELF. + Copyright (C) 1996 Free Software Foundation, Inc. + Contributed by Richard Henderson (rth@tamu.edu). + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02111-1307, USA. */ + +/* This is used on Alpha platforms that use the ELF format. +Currently only Linux uses this. */ + +#if 0 +#include "alpha/linux.h" +#endif + +#undef TARGET_VERSION +#define TARGET_VERSION fprintf (stderr, " (Alpha Linux/ELF)"); + +#undef OBJECT_FORMAT_COFF +#undef EXTENDED_COFF +#define OBJECT_FORMAT_ELF + +#define SDB_DEBUGGING_INFO + +#undef ASM_FINAL_SPEC + +#undef CPP_PREDEFINES +#define CPP_PREDEFINES "\ +-D__alpha -D__alpha__ -D__linux__ -D__linux -D_LONGLONG -Dlinux -Dunix \ +-Asystem(linux) -Acpu(alpha) -Amachine(alpha) -D__ELF__" + +#undef LINK_SPEC +#define LINK_SPEC "-m elf64alpha -G 8 %{O*:-O3} %{!O*:-O1} \ + %{shared:-shared} \ + %{!shared: \ + %{!static: \ + %{rdynamic:-export-dynamic} \ + %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}} \ + %{static:-static}}" + +/* Output at beginning of assembler file. */ + +#undef ASM_FILE_START +#define ASM_FILE_START(FILE) \ +{ \ + alpha_write_verstamp (FILE); \ + output_file_directive (FILE, main_input_filename); \ + fprintf (FILE, "\t.version\t\"01.01\"\n"); \ + fprintf (FILE, "\t.set noat\n"); \ +} + +#define ASM_OUTPUT_SOURCE_LINE(STREAM, LINE) \ + alpha_output_lineno (STREAM, LINE) +extern void alpha_output_lineno (); + +extern void output_file_directive (); + +/* Attach a special .ident directive to the end of the file to identify + the version of GCC which compiled this code. The format of the + .ident string is patterned after the ones produced by native svr4 + C compilers. */ + +#define IDENT_ASM_OP ".ident" + +#ifdef IDENTIFY_WITH_IDENT +#define ASM_IDENTIFY_GCC(FILE) /* nothing */ +#define ASM_IDENTIFY_LANGUAGE(FILE) \ + fprintf(FILE, "\t%s \"GCC (%s) %s\"\n", IDENT_ASM_OP, \ + lang_identify(), version_string) +#else +#define ASM_FILE_END(FILE) \ +do { \ + fprintf ((FILE), "\t%s\t\"GCC: (GNU) %s\"\n", \ + IDENT_ASM_OP, version_string); \ + } while (0) +#endif + +/* Allow #sccs in preprocessor. */ + +#define SCCS_DIRECTIVE + +/* Output #ident as a .ident. */ + +#define ASM_OUTPUT_IDENT(FILE, NAME) \ + fprintf (FILE, "\t%s\t\"%s\"\n", IDENT_ASM_OP, NAME); + +/* This is how to allocate empty space in some section. The .zero + pseudo-op is used for this on most svr4 assemblers. */ + +#define SKIP_ASM_OP ".zero" + +#undef ASM_OUTPUT_SKIP +#define ASM_OUTPUT_SKIP(FILE,SIZE) \ + fprintf (FILE, "\t%s\t%u\n", SKIP_ASM_OP, (SIZE)) + +/* Output the label which precedes a jumptable. Note that for all svr4 + systems where we actually generate jumptables (which is to say every + svr4 target except i386, where we use casesi instead) we put the jump- + tables into the .rodata section and since other stuff could have been + put into the .rodata section prior to any given jumptable, we have to + make sure that the location counter for the .rodata section gets pro- + perly re-aligned prior to the actual beginning of the jump table. */ + +#define ALIGN_ASM_OP ".align" + +#ifndef ASM_OUTPUT_BEFORE_CASE_LABEL +#define ASM_OUTPUT_BEFORE_CASE_LABEL(FILE,PREFIX,NUM,TABLE) \ + ASM_OUTPUT_ALIGN ((FILE), 2); +#endif + +#undef ASM_OUTPUT_CASE_LABEL +#define ASM_OUTPUT_CASE_LABEL(FILE,PREFIX,NUM,JUMPTABLE) \ + do { \ + ASM_OUTPUT_BEFORE_CASE_LABEL (FILE, PREFIX, NUM, JUMPTABLE) \ + ASM_OUTPUT_INTERNAL_LABEL (FILE, PREFIX, NUM); \ + } while (0) + +/* The standard SVR4 assembler seems to require that certain builtin + library routines (e.g. .udiv) be explicitly declared as .globl + in each assembly file where they are referenced. */ + +#define ASM_OUTPUT_EXTERNAL_LIBCALL(FILE, FUN) \ + ASM_GLOBALIZE_LABEL (FILE, XSTR (FUN, 0)) + +/* This says how to output assembler code to declare an + uninitialized external linkage data object. Under SVR4, + the linker seems to want the alignment of data objects + to depend on their types. We do exactly that here. */ + +#define COMMON_ASM_OP ".comm" + +#undef ASM_OUTPUT_ALIGNED_COMMON +#define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN) \ +do { \ + fprintf ((FILE), "\t%s\t", COMMON_ASM_OP); \ + assemble_name ((FILE), (NAME)); \ + fprintf ((FILE), ",%u,%u\n", (SIZE), (ALIGN) / BITS_PER_UNIT); \ +} while (0) + +/* This says how to output assembler code to declare an + uninitialized internal linkage data object. Under SVR4, + the linker seems to want the alignment of data objects + to depend on their types. We do exactly that here. */ + +#define LOCAL_ASM_OP ".local" + +#undef ASM_OUTPUT_ALIGNED_LOCAL +#define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN) \ +do { \ + fprintf ((FILE), "\t%s\t", LOCAL_ASM_OP); \ + assemble_name ((FILE), (NAME)); \ + fprintf ((FILE), "\n"); \ + ASM_OUTPUT_ALIGNED_COMMON (FILE, NAME, SIZE, ALIGN); \ +} while (0) + +/* This is the pseudo-op used to generate a 64-bit word of data with a + specific value in some section. */ + +#define INT_ASM_OP ".quad" + +/* This is the pseudo-op used to generate a contiguous sequence of byte + values from a double-quoted string WITHOUT HAVING A TERMINATING NUL + AUTOMATICALLY APPENDED. This is the same for most svr4 assemblers. */ + +#undef ASCII_DATA_ASM_OP +#define ASCII_DATA_ASM_OP ".ascii" + +/* Support const sections and the ctors and dtors sections for g++. + Note that there appears to be two different ways to support const + sections at the moment. You can either #define the symbol + READONLY_DATA_SECTION (giving it some code which switches to the + readonly data section) or else you can #define the symbols + EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, SELECT_SECTION, and + SELECT_RTX_SECTION. We do both here just to be on the safe side. */ + +#define USE_CONST_SECTION 1 + +#define CONST_SECTION_ASM_OP ".section\t.rodata" + +/* Define the pseudo-ops used to switch to the .ctors and .dtors sections. + + Note that we want to give these sections the SHF_WRITE attribute + because these sections will actually contain data (i.e. tables of + addresses of functions in the current root executable or shared library + file) and, in the case of a shared library, the relocatable addresses + will have to be properly resolved/relocated (and then written into) by + the dynamic linker when it actually attaches the given shared library + to the executing process. (Note that on SVR4, you may wish to use the + `-z text' option to the ELF linker, when building a shared library, as + an additional check that you are doing everything right. But if you do + use the `-z text' option when building a shared library, you will get + errors unless the .ctors and .dtors sections are marked as writable + via the SHF_WRITE attribute.) */ + +#define CTORS_SECTION_ASM_OP ".section\t.ctors,\"aw\"" +#define DTORS_SECTION_ASM_OP ".section\t.dtors,\"aw\"" + +/* On svr4, we *do* have support for the .init and .fini sections, and we + can put stuff in there to be executed before and after `main'. We let + crtstuff.c and other files know this by defining the following symbols. + The definitions say how to change sections to the .init and .fini + sections. This is the same for all known svr4 assemblers. */ + +#define INIT_SECTION_ASM_OP ".section\t.init" +#define FINI_SECTION_ASM_OP ".section\t.fini" + +/* Support non-common, uninitialized data in the .bss section. */ + +#define BSS_SECTION_ASM_OP ".section\t.bss" + +/* A default list of other sections which we might be "in" at any given + time. For targets that use additional sections (e.g. .tdesc) you + should override this definition in the target-specific file which + includes this file. */ + +#undef EXTRA_SECTIONS +#define EXTRA_SECTIONS in_const, in_ctors, in_dtors, in_bss + +/* A default list of extra section function definitions. For targets + that use additional sections (e.g. .tdesc) you should override this + definition in the target-specific file which includes this file. */ + +#undef EXTRA_SECTION_FUNCTIONS +#define EXTRA_SECTION_FUNCTIONS \ + CONST_SECTION_FUNCTION \ + CTORS_SECTION_FUNCTION \ + DTORS_SECTION_FUNCTION \ + BSS_SECTION_FUNCTION + +#undef READONLY_DATA_SECTION +#define READONLY_DATA_SECTION() const_section () + +extern void text_section (); + +#define CONST_SECTION_FUNCTION \ +void \ +const_section () \ +{ \ + if (!USE_CONST_SECTION) \ + text_section(); \ + else if (in_section != in_const) \ + { \ + fprintf (asm_out_file, "%s\n", CONST_SECTION_ASM_OP); \ + in_section = in_const; \ + } \ +} + +#define CTORS_SECTION_FUNCTION \ +void \ +ctors_section () \ +{ \ + if (in_section != in_ctors) \ + { \ + fprintf (asm_out_file, "%s\n", CTORS_SECTION_ASM_OP); \ + in_section = in_ctors; \ + } \ +} + +#define DTORS_SECTION_FUNCTION \ +void \ +dtors_section () \ +{ \ + if (in_section != in_dtors) \ + { \ + fprintf (asm_out_file, "%s\n", DTORS_SECTION_ASM_OP); \ + in_section = in_dtors; \ + } \ +} + +#define BSS_SECTION_FUNCTION \ +void \ +bss_section () \ +{ \ + if (in_section != in_bss) \ + { \ + fprintf (asm_out_file, "%s\n", BSS_SECTION_ASM_OP); \ + in_section = in_bss; \ + } \ +} + + +/* Switch into a generic section. + This is currently only used to support section attributes. + + We make the section read-only and executable for a function decl, + read-only for a const data decl, and writable for a non-const data decl. */ +#define ASM_OUTPUT_SECTION_NAME(FILE, DECL, NAME) \ + fprintf (FILE, ".section\t%s,\"%s\",@progbits\n", NAME, \ + (DECL) && TREE_CODE (DECL) == FUNCTION_DECL ? "ax" : \ + (DECL) && TREE_READONLY (DECL) ? "a" : "aw") + + +/* A C statement (sans semicolon) to output an element in the table of + global constructors. */ +#define ASM_OUTPUT_CONSTRUCTOR(FILE,NAME) \ + do { \ + ctors_section (); \ + fprintf (FILE, "\t%s\t ", INT_ASM_OP); \ + assemble_name (FILE, NAME); \ + fprintf (FILE, "\n"); \ + } while (0) + +/* A C statement (sans semicolon) to output an element in the table of + global destructors. */ +#define ASM_OUTPUT_DESTRUCTOR(FILE,NAME) \ + do { \ + dtors_section (); \ + fprintf (FILE, "\t%s\t ", INT_ASM_OP); \ + assemble_name (FILE, NAME); \ + fprintf (FILE, "\n"); \ + } while (0) + +/* A C statement or statements to switch to the appropriate + section for output of DECL. DECL is either a `VAR_DECL' node + or a constant of some sort. RELOC indicates whether forming + the initial value of DECL requires link-time relocations. */ + +#define SELECT_SECTION(DECL,RELOC) \ +{ \ + if (TREE_CODE (DECL) == STRING_CST) \ + { \ + if (! flag_writable_strings) \ + const_section (); \ + else \ + data_section (); \ + } \ + else if (TREE_CODE (DECL) == VAR_DECL) \ + { \ + if ((flag_pic && RELOC) \ + || !TREE_READONLY (DECL) || TREE_SIDE_EFFECTS (DECL) \ + || !DECL_INITIAL (DECL) \ + || (DECL_INITIAL (DECL) != error_mark_node \ + && !TREE_CONSTANT (DECL_INITIAL (DECL)))) \ + { \ + if (DECL_COMMON (DECL) \ + && !DECL_INITIAL (DECL)) \ + /* || DECL_INITIAL (DECL) == error_mark_node)) */ \ + bss_section(); \ + else \ + data_section (); \ + } \ + else \ + const_section (); \ + } \ + else \ + const_section (); \ +} + +/* A C statement or statements to switch to the appropriate + section for output of RTX in mode MODE. RTX is some kind + of constant in RTL. The argument MODE is redundant except + in the case of a `const_int' rtx. Currently, these always + go into the const section. */ + +#undef SELECT_RTX_SECTION +#define SELECT_RTX_SECTION(MODE,RTX) const_section() + +/* Define the strings used for the special svr4 .type and .size directives. + These strings generally do not vary from one system running svr4 to + another, but if a given system (e.g. m88k running svr) needs to use + different pseudo-op names for these, they may be overridden in the + file which includes this one. */ + +#define TYPE_ASM_OP ".type" +#define SIZE_ASM_OP ".size" + +/* This is how we tell the assembler that a symbol is weak. */ + +#define ASM_WEAKEN_LABEL(FILE,NAME) \ + do { fputs ("\t.weak\t", FILE); assemble_name (FILE, NAME); \ + fputc ('\n', FILE); } while (0) + +/* This is how we tell the assembler that two symbols have the same value. */ + +#define ASM_OUTPUT_DEF(FILE,NAME1,NAME2) \ + do { assemble_name(FILE, NAME1); \ + fputs(" = ", FILE); \ + assemble_name(FILE, NAME2); \ + fputc('\n', FILE); } while (0) + +/* The following macro defines the format used to output the second + operand of the .type assembler directive. Different svr4 assemblers + expect various different forms for this operand. The one given here + is just a default. You may need to override it in your machine- + specific tm.h file (depending upon the particulars of your assembler). */ + +#define TYPE_OPERAND_FMT "@%s" + +/* Write the extra assembler code needed to declare a function's result. + Most svr4 assemblers don't require any special declaration of the + result value, but there are exceptions. */ + +#ifndef ASM_DECLARE_RESULT +#define ASM_DECLARE_RESULT(FILE, RESULT) +#endif + +/* These macros generate the special .type and .size directives which + are used to set the corresponding fields of the linker symbol table + entries in an ELF object file under SVR4. These macros also output + the starting labels for the relevant functions/objects. */ + +/* Write the extra assembler code needed to declare an object properly. */ + +#define ASM_DECLARE_OBJECT_NAME(FILE, NAME, DECL) \ + do { \ + fprintf (FILE, "\t%s\t ", TYPE_ASM_OP); \ + assemble_name (FILE, NAME); \ + putc (',', FILE); \ + fprintf (FILE, TYPE_OPERAND_FMT, "object"); \ + putc ('\n', FILE); \ + size_directive_output = 0; \ + if (!flag_inhibit_size_directive && DECL_SIZE (DECL)) \ + { \ + size_directive_output = 1; \ + fprintf (FILE, "\t%s\t ", SIZE_ASM_OP); \ + assemble_name (FILE, NAME); \ + fprintf (FILE, ",%d\n", int_size_in_bytes (TREE_TYPE (DECL))); \ + } \ + ASM_OUTPUT_LABEL(FILE, NAME); \ + } while (0) + +/* Output the size directive for a decl in rest_of_decl_compilation + in the case where we did not do so before the initializer. + Once we find the error_mark_node, we know that the value of + size_directive_output was set + by ASM_DECLARE_OBJECT_NAME when it was run for the same decl. */ + +#define ASM_FINISH_DECLARE_OBJECT(FILE, DECL, TOP_LEVEL, AT_END) \ +do { \ + char *name = XSTR (XEXP (DECL_RTL (DECL), 0), 0); \ + if (!flag_inhibit_size_directive && DECL_SIZE (DECL) \ + && ! AT_END && TOP_LEVEL \ + && DECL_INITIAL (DECL) == error_mark_node \ + && !size_directive_output) \ + { \ + size_directive_output = 1; \ + fprintf (FILE, "\t%s\t ", SIZE_ASM_OP); \ + assemble_name (FILE, name); \ + fprintf (FILE, ",%d\n", int_size_in_bytes (TREE_TYPE (DECL))); \ + } \ + } while (0) + +/* A table of bytes codes used by the ASM_OUTPUT_ASCII and + ASM_OUTPUT_LIMITED_STRING macros. Each byte in the table + corresponds to a particular byte value [0..255]. For any + given byte value, if the value in the corresponding table + position is zero, the given character can be output directly. + If the table value is 1, the byte must be output as a \ooo + octal escape. If the tables value is anything else, then the + byte value should be output as a \ followed by the value + in the table. Note that we can use standard UN*X escape + sequences for many control characters, but we don't use + \a to represent BEL because some svr4 assemblers (e.g. on + the i386) don't know about that. Also, we don't use \v + since some versions of gas, such as 2.2 did not accept it. */ + +#define ESCAPES \ +"\1\1\1\1\1\1\1\1btn\1fr\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\ +\0\0\"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ +\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\\0\0\0\ +\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\ +\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\ +\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\ +\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\ +\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1" + +/* Some svr4 assemblers have a limit on the number of characters which + can appear in the operand of a .string directive. If your assembler + has such a limitation, you should define STRING_LIMIT to reflect that + limit. Note that at least some svr4 assemblers have a limit on the + actual number of bytes in the double-quoted string, and that they + count each character in an escape sequence as one byte. Thus, an + escape sequence like \377 would count as four bytes. + + If your target assembler doesn't support the .string directive, you + should define this to zero. +*/ + +#define STRING_LIMIT ((unsigned) 256) + +#define STRING_ASM_OP ".string" + +/* + * We always use gas here, so we don't worry about ECOFF assembler problems. + */ +#undef TARGET_GAS +#define TARGET_GAS (1) + +#undef PREFERRED_DEBUGGING_TYPE +#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG + +/* Provide a STARTFILE_SPEC appropriate for Linux. Here we add + the Linux magical crtbegin.o file (see crtstuff.c) which + provides part of the support for getting C++ file-scope static + object constructed before entering `main'. */ + +#undef STARTFILE_SPEC +#define STARTFILE_SPEC \ + "%{!shared: \ + %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}}\ + crti.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}" + +/* Provide a ENDFILE_SPEC appropriate for Linux. Here we tack on + the Linux magical crtend.o file (see crtstuff.c) which + provides part of the support for getting C++ file-scope static + object constructed before entering `main', followed by a normal + Linux "finalizer" file, `crtn.o'. */ + +#undef ENDFILE_SPEC +#define ENDFILE_SPEC \ + "%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s" |
