diff options
Diffstat (limited to 'contrib/gcc/config-ml.in')
| -rw-r--r-- | contrib/gcc/config-ml.in | 871 |
1 files changed, 0 insertions, 871 deletions
diff --git a/contrib/gcc/config-ml.in b/contrib/gcc/config-ml.in deleted file mode 100644 index 16885f9..0000000 --- a/contrib/gcc/config-ml.in +++ /dev/null @@ -1,871 +0,0 @@ -# Configure fragment invoked in the post-target section for subdirs -# wanting multilib support. -# -# It is advisable to support a few --enable/--disable options to let the -# user select which libraries s/he really wants. -# -# Subdirectories wishing to use multilib should put the following lines -# in the "post-target" section of configure.in. -# -# if [ "${srcdir}" = "." ] ; then -# if [ "${with_target_subdir}" != "." ] ; then -# . ${with_multisrctop}../../config-ml.in -# else -# . ${with_multisrctop}../config-ml.in -# fi -# else -# . ${srcdir}/../config-ml.in -# fi -# -# -# Things are complicated because 6 separate cases must be handled: -# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6. -# -# srcdir=. is special. It must handle make programs that don't handle VPATH. -# To implement this, a symlink tree is built for each library and for each -# multilib subdir. -# -# The build tree is layed out as -# -# ./ -# newlib -# m68020/ -# newlib -# m68881/ -# newlib -# -# The nice feature about this arrangement is that inter-library references -# in the build tree work without having to care where you are. Note that -# inter-library references also work in the source tree because symlink trees -# are built when srcdir=. -# -# Unfortunately, trying to access the libraries in the build tree requires -# the user to manually choose which library to use as GCC won't be able to -# find the right one. This is viewed as the lesser of two evils. -# -# Configure variables: -# ${with_target_subdir} = "." for native, or ${target_alias} for cross. -# Set by top level Makefile. -# ${with_multisrctop} = how many levels of multilibs there are in the source -# tree. It exists to handle the case of configuring in the source tree: -# ${srcdir} is not constant. -# ${with_multisubdir} = name of multilib subdirectory (eg: m68020/m68881). -# -# Makefile variables: -# MULTISRCTOP = number of multilib levels in source tree (+1 if cross) -# (FIXME: note that this is different than ${with_multisrctop}. Check out.). -# MULTIBUILDTOP = number of multilib levels in build tree -# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...) -# (only defined in each library's main Makefile). -# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000) -# (only defined in each multilib subdir). - -# FIXME: Multilib is currently disabled by default for everything other than -# newlib. It is up to each target to turn on multilib support for the other -# libraries as desired. - -# We have to handle being invoked by both Cygnus configure and Autoconf. -# -# Cygnus configure incoming variables: -# srcdir, subdir, host, arguments -# -# Autoconf incoming variables: -# srcdir, host, ac_configure_args -# -# We *could* figure srcdir and host out, but we'd have to do work that -# our caller has already done to figure them out and requiring these two -# seems reasonable. -# Note that `host' in this case is GCC's `target'. Target libraries are -# configured for a particular host. - -if [ -n "${ac_configure_args}" ]; then - Makefile=${ac_file-Makefile} - ml_config_shell=${CONFIG_SHELL-/bin/sh} - ml_arguments="${ac_configure_args}" - ml_realsrcdir=${srcdir} -else - Makefile=${Makefile-Makefile} - ml_config_shell=${config_shell-/bin/sh} - ml_arguments="${arguments}" - if [ -n "${subdir}" -a "${subdir}" != "." ] ; then - ml_realsrcdir=${srcdir}/${subdir} - else - ml_realsrcdir=${srcdir} - fi -fi - -# Scan all the arguments and set all the ones we need. - -ml_verbose=--verbose -for option in ${ml_arguments} -do - case $option in - --*) ;; - -*) option=-$option ;; - esac - - case $option in - --*=*) - optarg=`echo $option | sed -e 's/^[^=]*=//'` - ;; - esac - - case $option in - --disable-*) - enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'` - eval $enableopt=no - ;; - --enable-*) - case "$option" in - *=*) ;; - *) optarg=yes ;; - esac - enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'` - eval $enableopt="$optarg" - ;; - --norecursion | --no*) - ml_norecursion=yes - ;; - --silent | --sil* | --quiet | --q*) - ml_verbose=--silent - ;; - --verbose | --v | --verb*) - ml_verbose=--verbose - ;; - --with-*) - case "$option" in - *=*) ;; - *) optarg=yes ;; - esac - withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'` - eval $withopt="$optarg" - ;; - --without-*) - withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'` - eval $withopt=no - ;; - esac -done - -# Only do this if --enable-multilib. -if [ "${enable_multilib}" = yes ]; then - -# Compute whether this is the library's top level directory -# (ie: not a multilib subdirectory, and not a subdirectory like newlib/src). -# ${with_multisubdir} tells us we're in the right branch, but we could be -# in a subdir of that. -# ??? The previous version could void this test by separating the process into -# two files: one that only the library's toplevel configure.in ran (to -# configure the multilib subdirs), and another that all configure.in's ran to -# update the Makefile. It seemed reasonable to collapse all multilib support -# into one file, but it does leave us with having to perform this test. -ml_toplevel_p=no -if [ -z "${with_multisubdir}" ]; then - if [ "${srcdir}" = "." ]; then - # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}. - # ${with_target_subdir} = "." for native, otherwise target alias. - if [ "${with_target_subdir}" = "." ]; then - if [ -f ${ml_realsrcdir}/../config-ml.in ]; then - ml_toplevel_p=yes - fi - else - if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then - ml_toplevel_p=yes - fi - fi - else - # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}. - if [ -f ${ml_realsrcdir}/../config-ml.in ]; then - ml_toplevel_p=yes - fi - fi -fi - -# If this is the library's top level directory, set multidirs to the -# multilib subdirs to support. This lives at the top because we need -# `multidirs' set right away. - -if [ "${ml_toplevel_p}" = yes ]; then - -multidirs= -for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do - dir=`echo $i | sed -e 's/;.*$//'` - if [ "${dir}" = "." ]; then - true - else - if [ -z "${multidirs}" ]; then - multidirs="${dir}" - else - multidirs="${multidirs} ${dir}" - fi - fi -done - -# Target libraries are configured for the host they run on, so we check -# $host here, not $target. - -case "${host}" in -arc-*-elf*) - if [ x$enable_biendian != xyes ] - then - old_multidirs=${multidirs} - multidirs="" - for x in ${old_multidirs}; do - case "${x}" in - *be*) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - ;; -arm-*-*) - if [ x"$enable_fpu" = xno ] - then - old_multidirs=${multidirs} - multidirs="" - for x in ${old_multidirs}; do - case "${x}" in - *fpu*) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x"$enable_26bit" = xno ] - then - old_multidirs=${multidirs} - multidirs="" - for x in ${old_multidirs}; do - case "${x}" in - *26bit*) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x"$enable_underscore" = xno ] - then - old_multidirs=${multidirs} - multidirs="" - for x in ${old_multidirs}; do - case "${x}" in - *under*) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x"$enable_interwork" = xno ] - then - old_multidirs=${multidirs} - multidirs="" - for x in ${old_multidirs}; do - case "${x}" in - *interwork*) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_biendian = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *le* ) : ;; - *be* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x"$enable_nofmult" = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *nofmult* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - ;; -m68*-*-*) - if [ x$enable_softfloat = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *soft-float* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_m68881 = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *m68881* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_m68000 = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *m68000* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_m68020 = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *m68020* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - ;; -mips*-*-*) - if [ x$enable_single_float = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *single* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_biendian = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *el* ) : ;; - *eb* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_softfloat = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *soft-float* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - case " $multidirs " in - *" mabi=64 "*) - # We will not be able to create libraries with -mabi=64 if - # we cannot even link a trivial program. It usually - # indicates the 64bit libraries are missing. - if echo 'main() {}' > conftest.c && - ${CC-gcc} -mabi=64 conftest.c -o conftest; then - : - else - echo Could not link program with -mabi=64, disabling it. - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *mabi=64* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - rm -f conftest.c conftest - ;; - esac - ;; -powerpc*-*-* | rs6000*-*-*) - if [ x$enable_aix64 = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *ppc64* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_pthread = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *pthread* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_softfloat = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *soft-float* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_powercpu = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - power | */power | */power/* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_powerpccpu = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *powerpc* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_powerpcos = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *mcall-linux* | *mcall-solaris* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_biendian = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *mlittle* | *mbig* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_sysv = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *mcall-sysv* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - if [ x$enable_aix = xno ] - then - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *mcall-aix* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - ;; -sparc*-*-*) - case " $multidirs " in - *" m64 "*) - # We will not be able to create libraries with -m64 if - # we cannot even link a trivial program. It usually - # indicates the 64bit libraries are missing. - if echo 'main() {}' > conftest.c && - ${CC-gcc} -m64 conftest.c -o conftest; then - : - else - echo Could not link program with -m64, disabling it. - old_multidirs="${multidirs}" - multidirs="" - for x in ${old_multidirs}; do - case "$x" in - *m64* ) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - rm -f conftest.c conftest - ;; - esac - ;; -esac - -# Remove extraneous blanks from multidirs. -# Tests like `if [ -n "$multidirs" ]' require it. -multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'` - -# Add code to library's top level makefile to handle building the multilib -# subdirs. - -cat > Multi.tem <<\EOF - -# FIXME: There should be an @-sign in front of the `if'. -# Leave out until this is tested a bit more. -multi-do: - if [ -z "$(MULTIDIRS)" ]; then \ - true; \ - else \ - rootpre=`pwd`/; export rootpre; \ - srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \ - lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \ - compiler="$(CC)"; \ - for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \ - dir=`echo $$i | sed -e 's/;.*$$//'`; \ - if [ "$${dir}" = "." ]; then \ - true; \ - else \ - if [ -d ../$${dir}/$${lib} ]; then \ - flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ - if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \ - CFLAGS="$(CFLAGS) $${flags}" \ - prefix="$(prefix)" \ - exec_prefix="$(exec_prefix)" \ - GCJFLAGS="$(GCJFLAGS) $${flags}" \ - CXXFLAGS="$(CXXFLAGS) $${flags}" \ - LIBCFLAGS="$(LIBCFLAGS) $${flags}" \ - LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \ - LDFLAGS="$(LDFLAGS) $${flags}" \ - $(DO)); then \ - true; \ - else \ - exit 1; \ - fi; \ - else true; \ - fi; \ - fi; \ - done; \ - fi - -# FIXME: There should be an @-sign in front of the `if'. -# Leave out until this is tested a bit more. -multi-clean: - if [ -z "$(MULTIDIRS)" ]; then \ - true; \ - else \ - lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \ - for dir in Makefile $(MULTIDIRS); do \ - if [ -f ../$${dir}/$${lib}/Makefile ]; then \ - if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \ - then true; \ - else exit 1; \ - fi; \ - else true; \ - fi; \ - done; \ - fi -EOF - -cat ${Makefile} Multi.tem > Makefile.tem -rm -f ${Makefile} Multi.tem -mv Makefile.tem ${Makefile} - -fi # ${ml_toplevel_p} = yes - -if [ "${ml_verbose}" = --verbose ]; then - echo "Adding multilib support to Makefile in ${ml_realsrcdir}" - if [ "${ml_toplevel_p}" = yes ]; then - echo "multidirs=${multidirs}" - fi - echo "with_multisubdir=${with_multisubdir}" -fi - -if [ "${srcdir}" = "." ]; then - if [ "${with_target_subdir}" != "." ]; then - ml_srcdotdot="../" - else - ml_srcdotdot="" - fi -else - ml_srcdotdot="" -fi - -if [ -z "${with_multisubdir}" ]; then - ml_subdir= - ml_builddotdot= - : # ml_srcdotdot= # already set -else - ml_subdir="/${with_multisubdir}" - # The '[^/][^/]*' appears that way to work around a SunOS sed bug. - ml_builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`/ - if [ "$srcdir" = "." ]; then - ml_srcdotdot=${ml_srcdotdot}${ml_builddotdot} - else - : # ml_srcdotdot= # already set - fi -fi - -if [ "${ml_toplevel_p}" = yes ]; then - ml_do='$(MAKE)' - ml_clean='$(MAKE)' -else - ml_do=true - ml_clean=true -fi - -# TOP is used by newlib and should not be used elsewhere for this purpose. -# MULTI{SRC,BUILD}TOP are the proper ones to use. MULTISRCTOP is empty -# when srcdir != builddir. MULTIBUILDTOP is always some number of ../'s. -# FIXME: newlib needs to be updated to use MULTI{SRC,BUILD}TOP so we can -# delete TOP. Newlib may wish to continue to use TOP for its own purposes -# of course. -# MULTIDIRS is non-empty for the cpu top level Makefile (eg: newlib/Makefile) -# and lists the subdirectories to recurse into. -# MULTISUBDIR is non-empty in each cpu subdirectory's Makefile -# (eg: newlib/h8300h/Makefile) and is the installed subdirectory name with -# a leading '/'. -# MULTIDO is used for targets like all, install, and check where -# $(FLAGS_TO_PASS) augmented with the subdir's compiler option is needed. -# MULTICLEAN is used for the *clean targets. -# -# ??? It is possible to merge MULTIDO and MULTICLEAN into one. They are -# currently kept separate because we don't want the *clean targets to require -# the existence of the compiler (which MULTIDO currently requires) and -# therefore we'd have to record the directory options as well as names -# (currently we just record the names and use --print-multi-lib to get the -# options). - -sed -e "s:^TOP[ ]*=[ ]*\([./]*\)[ ]*$:TOP = ${ml_builddotdot}\1:" \ - -e "s:^MULTISRCTOP[ ]*=.*$:MULTISRCTOP = ${ml_srcdotdot}:" \ - -e "s:^MULTIBUILDTOP[ ]*=.*$:MULTIBUILDTOP = ${ml_builddotdot}:" \ - -e "s:^MULTIDIRS[ ]*=.*$:MULTIDIRS = ${multidirs}:" \ - -e "s:^MULTISUBDIR[ ]*=.*$:MULTISUBDIR = ${ml_subdir}:" \ - -e "s:^MULTIDO[ ]*=.*$:MULTIDO = $ml_do:" \ - -e "s:^MULTICLEAN[ ]*=.*$:MULTICLEAN = $ml_clean:" \ - ${Makefile} > Makefile.tem -rm -f ${Makefile} -mv Makefile.tem ${Makefile} - -# If this is the library's top level, configure each multilib subdir. -# This is done at the end because this is the loop that runs configure -# in each multilib subdir and it seemed reasonable to finish updating the -# Makefile before going on to configure the subdirs. - -if [ "${ml_toplevel_p}" = yes ]; then - -# We must freshly configure each subdirectory. This bit of code is -# actually partially stolen from the main configure script. FIXME. - -if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then - - if [ "${ml_verbose}" = --verbose ]; then - echo "Running configure in multilib subdirs ${multidirs}" - echo "pwd: `pwd`" - fi - - ml_origdir=`pwd` - ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'` - # cd to top-level-build-dir/${with_target_subdir} - cd .. - - for ml_dir in ${multidirs}; do - - if [ "${ml_verbose}" = --verbose ]; then - echo "Running configure in multilib subdir ${ml_dir}" - echo "pwd: `pwd`" - fi - - if [ -d ${ml_dir} ]; then true; else - # ``mkdir -p ${ml_dir}'' See also mkinstalldirs. - pathcomp="" - for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" 1>&2 - mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$? - fi - if test ! -d "$pathcomp"; then - exit $lasterr - fi - pathcomp="$pathcomp/" - done - fi - if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi - - # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../ - dotdot=../`echo ${ml_dir} | sed -e 's|[^/]||g' -e 's|/|../|g'` - - case ${srcdir} in - ".") - echo Building symlink tree in `pwd`/${ml_dir}/${ml_libdir} - if [ "${with_target_subdir}" != "." ]; then - ml_unsubdir="../" - else - ml_unsubdir="" - fi - (cd ${ml_dir}/${ml_libdir}; - ../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "") - if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then - if [ x"${MAKE}" = x ]; then - (cd ${ml_dir}/${ml_libdir}; make distclean) - else - (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean) - fi - fi - ml_newsrcdir="." - ml_srcdiroption= - multisrctop=${dotdot} - ;; - *) - case "${srcdir}" in - /* | [A-Za-z]:[\\/]* ) # absolute path - ml_newsrcdir=${srcdir} - ;; - *) # otherwise relative - ml_newsrcdir=${dotdot}${srcdir} - ;; - esac - ml_srcdiroption="-srcdir=${ml_newsrcdir}" - multisrctop= - ;; - esac - - case "${progname}" in - /* | [A-Za-z]:[\\/]* ) ml_recprog=${progname} ;; - *) ml_recprog=${dotdot}${progname} ;; - esac - - # FIXME: POPDIR=${PWD=`pwd`} doesn't work here. - ML_POPDIR=`pwd` - cd ${ml_dir}/${ml_libdir} - - if [ -f ${ml_newsrcdir}/configure ]; then - ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache" - fi - - # find compiler flag corresponding to ${ml_dir} - for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do - dir=`echo $i | sed -e 's/;.*$//'` - if [ "${dir}" = "${ml_dir}" ]; then - flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'` - break - fi - done - ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags" GCJ="${GCJ_}$flags"' - - if [ "${with_target_subdir}" = "." ]; then - CC_=$CC' ' - CXX_=$CXX' ' - GCJ_=$GCJ' ' - else - # Create a regular expression that matches any string as long - # as ML_POPDIR. - popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'` - CC_= - for arg in ${CC}; do - case $arg in - -[BIL]"${ML_POPDIR}"/*) - CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;; - "${ML_POPDIR}"/*) - CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;; - *) - CC_="${CC_}${arg} " ;; - esac - done - - CXX_= - for arg in ${CXX}; do - case $arg in - -[BIL]"${ML_POPDIR}"/*) - CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;; - "${ML_POPDIR}"/*) - CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;; - *) - CXX_="${CXX_}${arg} " ;; - esac - done - - GCJ_= - for arg in ${GCJ}; do - case $arg in - -[BIL]"${ML_POPDIR}"/*) - GCJ_="${GCJ_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;; - "${ML_POPDIR}"/*) - GCJ_="${GCJ_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;; - *) - GCJ_="${GCJ_}${arg} " ;; - esac - done - - if test "x${LD_LIBRARY_PATH+set}" = xset; then - LD_LIBRARY_PATH_= - for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do - case "$arg" in - "${ML_POPDIR}"/*) - arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"` - ;; - esac - if test "x$LD_LIBRARY_PATH_" != x; then - LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg - else - LD_LIBRARY_PATH_=$arg - fi - done - ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_" - fi - - if test "x${SHLIB_PATH+set}" = xset; then - SHLIB_PATH_= - for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do - case "$arg" in - "${ML_POPDIR}"/*) - arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"` - ;; - esac - if test "x$SHLIB_PATH_" != x; then - SHLIB_PATH_=$SHLIB_PATH_:$arg - else - SHLIB_PATH_=$arg - fi - done - ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_" - fi - fi - - if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \ - --with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \ - ${ml_arguments} ${ml_srcdiroption} ; then - true - else - exit 1 - fi - - cd ${ML_POPDIR} - - done - - cd ${ml_origdir} -fi - -fi # ${ml_toplevel_p} = yes -fi # ${enable_multilib} = yes |
