diff options
| -rw-r--r-- | sys/dev/hme/if_hme.c | 4 | ||||
| -rw-r--r-- | sys/dev/hme/if_hmereg.h | 2 |
2 files changed, 3 insertions, 3 deletions
diff --git a/sys/dev/hme/if_hme.c b/sys/dev/hme/if_hme.c index 09e94e7..6f76c90 100644 --- a/sys/dev/hme/if_hme.c +++ b/sys/dev/hme/if_hme.c @@ -203,7 +203,7 @@ hme_config(struct hme_softc *sc) * the DMA bus tag: * sc_dmatag * - * the bus handles, tags and offsets (splitted for SBus compatability): + * the bus handles, tags and offsets (splitted for SBus compatibility): * sc_seb{t,h,o} (Shared Ethernet Block registers) * sc_erx{t,h,o} (Receiver Unit registers) * sc_etx{t,h,o} (Transmitter Unit registers) @@ -1559,7 +1559,7 @@ hme_mediachange_locked(struct hme_softc *sc) * If both PHYs are present reset them. This is required for * unisolating the previously isolated PHY when switching PHYs. * As the above hme_mifinit() call will set the MII drivers in - * the XIF configuration register accoring to the currently + * the XIF configuration register according to the currently * selected media, there should be no window during which the * data paths of both transceivers are open at the same time, * even if the PHY device drivers use MIIF_NOISOLATE. diff --git a/sys/dev/hme/if_hmereg.h b/sys/dev/hme/if_hmereg.h index 3d93eba..585ca84 100644 --- a/sys/dev/hme/if_hmereg.h +++ b/sys/dev/hme/if_hmereg.h @@ -79,7 +79,7 @@ #define HME_SEB_STAT_TXEACK 0x04000000 /* error during tx DMA */ #define HME_SEB_STAT_TXLERR 0x08000000 /* late error during tx DMA */ #define HME_SEB_STAT_TXPERR 0x10000000 /* parity error during tx DMA */ -#define HME_SEB_STAT_TXTERR 0x20000000 /* tag error durig tx DMA */ +#define HME_SEB_STAT_TXTERR 0x20000000 /* tag error during tx DMA */ #define HME_SEB_STAT_SLVERR 0x40000000 /* pio access error */ #define HME_SEB_STAT_SLVPERR 0x80000000 /* pio access parity error */ #define HME_SEB_STAT_BITS "\177\020" \ |
