diff options
-rw-r--r-- | sys/amd64/conf/GENERIC | 1 | ||||
-rw-r--r-- | sys/conf/NOTES | 1 | ||||
-rw-r--r-- | sys/conf/files | 1 | ||||
-rw-r--r-- | sys/dev/sn/if_sn.c | 1694 | ||||
-rw-r--r-- | sys/dev/sn/if_snreg.h | 447 | ||||
-rw-r--r-- | sys/i386/conf/GENERIC | 1 | ||||
-rw-r--r-- | sys/i386/conf/LINT | 1 | ||||
-rw-r--r-- | sys/i386/conf/NOTES | 1 | ||||
-rw-r--r-- | sys/i386/isa/isa_compat.h | 5 | ||||
-rw-r--r-- | sys/pc98/pc98/isa_compat.h | 5 |
10 files changed, 2157 insertions, 0 deletions
diff --git a/sys/amd64/conf/GENERIC b/sys/amd64/conf/GENERIC index 731267f..508ef8d 100644 --- a/sys/amd64/conf/GENERIC +++ b/sys/amd64/conf/GENERIC @@ -187,6 +187,7 @@ device fe0 at isa? port 0x300 irq ? device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 irq ? +device sn0 at ias? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? port? irq ? diff --git a/sys/conf/NOTES b/sys/conf/NOTES index 6dfc29c..952c690 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -1292,6 +1292,7 @@ device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device rdp0 at isa? port 0x378 irq 7 flags 2 device sr0 at isa? port 0x300 irq 5 iomem 0xd0000 +device sn0 at isa? port 0x300 irq 10 device wi0 options WLCACHE # enables the signal-strength cache options WLDEBUG # enables verbose debugging output diff --git a/sys/conf/files b/sys/conf/files index aef6141..f915d1d 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -211,6 +211,7 @@ smbus_if.h optional smbus \ dev/smbus/smbconf.c optional smbus dev/smbus/smbus.c optional smbus dev/smbus/smb.c optional smb +dev/sn/if_sn.c optional sn dev/iicbus/iicbb.c optional iicbb iicbb_if.o optional iicbb \ dependency "iicbb_if.c" \ diff --git a/sys/dev/sn/if_sn.c b/sys/dev/sn/if_sn.c new file mode 100644 index 0000000..e0b832b --- /dev/null +++ b/sys/dev/sn/if_sn.c @@ -0,0 +1,1694 @@ +/* + * Copyright (c) 1996 Gardner Buchanan <gbuchanan@shl.com> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Gardner Buchanan. + * 4. The name of Gardner Buchanan may not be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * This is a driver for SMC's 9000 series of Ethernet adapters. + * + * This FreeBSD driver is derived from the smc9194 Linux driver by + * Erik Stahlman and is Copyright (C) 1996 by Erik Stahlman. + * This driver also shamelessly borrows from the FreeBSD ep driver + * which is Copyright (C) 1994 Herb Peyerl <hpeyerl@novatel.ca> + * All rights reserved. + * + * It is set up for my SMC91C92 equipped Ampro LittleBoard embedded + * PC. It is adapted from Erik Stahlman's Linux driver which worked + * with his EFA Info*Express SVC VLB adaptor. According to SMC's databook, + * it will work for the entire SMC 9xxx series. (Ha Ha) + * + * "Features" of the SMC chip: + * 4608 byte packet memory. (for the 91C92. Others have more) + * EEPROM for configuration + * AUI/TP selection + * + * Authors: + * Erik Stahlman erik@vt.edu + * Herb Peyerl hpeyerl@novatel.ca + * Andres Vega Garcia avega@sophia.inria.fr + * Serge Babkin babkin@hq.icb.chel.su + * Gardner Buchanan gbuchanan@shl.com + * + * Sources: + * o SMC databook + * o "smc9194.c:v0.10(FIXED) 02/15/96 by Erik Stahlman (erik@vt.edu)" + * o "if_ep.c,v 1.19 1995/01/24 20:53:45 davidg Exp" + * + * Known Bugs: + * o The hardware multicast filter isn't used yet. + * o Setting of the hardware address isn't supported. + * o Hardware padding isn't used. + */ + +/* + * Modifications for Megahertz X-Jack Ethernet Card (XJ-10BT) + * + * Copyright (c) 1996 by Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org> + * BSD-nomads, Tokyo, Japan. + */ +/* + * Multicast support by Kei TANAKA <kei@pal.xerox.com> + * Special thanks to itojun@itojun.org + */ +#include "sn.h" +#if NSN > 0 + +#undef SN_DEBUG /* (by hosokawa) */ + +#include "pnp.h" + +#include <sys/param.h> +#if defined(__FreeBSD__) +#include <sys/systm.h> +#include <sys/kernel.h> +#endif +#include <sys/errno.h> +#include <sys/sockio.h> +#include <sys/malloc.h> +#include <sys/mbuf.h> +#include <sys/socket.h> +#include <sys/syslog.h> +#if defined(__NetBSD__) +#include <sys/select.h> +#endif + +#include <net/ethernet.h> +#include <net/if.h> +#include <net/if_arp.h> +#include <net/if_dl.h> +#include <net/if_types.h> +#include <net/if_mib.h> + +#ifdef INET +#include <netinet/in.h> +#include <netinet/in_systm.h> +#include <netinet/in_var.h> +#include <netinet/ip.h> +#endif + +#ifdef NS +#include <netns/ns.h> +#include <netns/ns_if.h> +#endif + +#include <net/bpf.h> +#include <net/bpfdesc.h> + +#if defined(__FreeBSD__) +#include <machine/clock.h> +#endif + +#include <i386/isa/isa.h> +#include <i386/isa/isa_device.h> +#include <i386/isa/icu.h> + +/* PCCARD suport */ +#define NCARD 0 +#if NCARD > 0 +#include <sys/select.h> +#include <sys/module.h> +#include <pccard/cardinfo.h> +#include <pccard/slot.h> +#include <pccard/driver.h> +#endif /* NCARD > 0 */ + +#include <dev/sn/if_snreg.h> + +/* for PCMCIA Ethernet */ +static int sn_pccard[NSN]; /* set to 1 if it's PCMCIA card */ +static u_char sn_pccard_macaddr[NSN][6]; +static int sn_import_macaddr[NSN]; + +static int snprobe __P((struct isa_device *)); +static int snattach __P((struct isa_device *)); +static int snioctl __P((struct ifnet * ifp, u_long, caddr_t)); + +static int smc_probe __P((int ioaddr, int pccard)); +static void snresume __P((struct ifnet *)); + +void sninit __P((void *)); +static ointhand2_t snintr; +void snread __P((struct ifnet *)); +void snreset __P((int)); +void snstart __P((struct ifnet *)); +void snstop __P((int)); +void snwatchdog __P((struct ifnet *)); + +static void sn_setmcast(struct sn_softc *); +static int sn_getmcf(struct arpcom *ac, u_char *mcf); +static u_int smc_crc(u_char *); + +/* I (GB) have been unlucky getting the hardware padding + * to work properly. + */ +#define SW_PAD + +struct sn_softc sn_softc[NSN]; + +struct isa_driver sndriver = { + snprobe, + snattach, + "sn", + 0 +}; + + +/* PCCARD Support */ +#if NCARD > 0 +/* + * PC-Card (PCMCIA) specific code. + */ +static int sn_card_intr(struct pccard_devinfo *); /* Interrupt handler */ +static void snunload(struct pccard_devinfo *); /* Disable driver */ +static int sn_card_init(struct pccard_devinfo *); /* init device */ + +PCCARD_MODULE(sn,sn_card_init,snunload,sn_card_intr,0,net_imask); + +static int +sn_card_init(struct pccard_devinfo *devi) +{ + int unit = devi->pd_unit; + struct sn_softc *sc = &sn_softc[devi->pd_unit]; + + sn_pccard[unit] = 1; + sn_import_macaddr[unit] = 0; + if (devi->misc[0] | devi->misc[1] | devi->misc[2]) { + int i; + for (i = 0; i < 6; i++) { + sn_pccard_macaddr[unit][i] = devi->misc[i]; + } + sn_import_macaddr[unit] = 1; + } + sc->gone = 0; + /* + * validate unit number. + */ + if (unit >= NSN) + return ENODEV; + /* + * Probe the device. If a value is returned, the + * device was found at the location. + */ +#ifdef SN_DEBUG +printf("snprobe()\n"); +#endif + if (snprobe(&devi->isahd)==0) + return ENXIO; +#ifdef SN_DEBUG +printf("snattach()\n"); +#endif + if (snattach(&devi->isahd)==0) + return ENXIO; + /* initialize interface dynamically */ + sc->arpcom.ac_if.if_snd.ifq_maxlen = ifqmaxlen; + + return 0; +} + +static void +snunload(struct pccard_devinfo *devi) +{ + int unit = devi->pd_unit; + struct sn_softc *sc = &sn_softc[devi->pd_unit]; + struct ifnet *ifp = &sc->arpcom.ac_if; + + if (sc->gone) { + printf("sn%d: already unloaded.\n", unit); + return; + } + + snstop(unit); + sc->gone = 1; + ifp->if_flags &= ~IFF_RUNNING; + if_down(ifp); + printf("sn%d: unload.\n", unit); +} + +static int +sn_card_intr(struct pccard_devinfo *devi) +{ + int unit = devi->pd_unit; + snintr(unit); + return(1); +} + +#endif /* NCARD > 0 */ + + +int +snprobe(struct isa_device *is) +{ + /* + * Device was configured with 'port ?' In this case we complain + */ + if (is->id_iobase == -1) { /* port? */ + printf("sn%d: SMC91Cxx cannot determine ioaddr\n", is->id_unit); + return 0; + } + /* + * Device was configured with 'irq ?' In this case we complain + */ + if (is->id_irq == 0) { + printf("sn%d: SMC91Cxx cannot determine irq\n", is->id_unit); + return (0); + } + /* + * Device was configured with 'port xxx', 'irq xx' In this case we + * search for the card with that address + */ + if (smc_probe(is->id_iobase, sn_pccard[is->id_unit]) != 0) + return (0); + + return (SMC_IO_EXTENT); +} + +static int +snattach(struct isa_device *is) +{ + struct sn_softc *sc = &sn_softc[is->id_unit]; + struct ifnet *ifp = &sc->arpcom.ac_if; + u_short i; + int j; + u_char *p; + struct ifaddr *ifa; + struct sockaddr_dl *sdl; + int rev; + u_short address; +#if NCARD > 0 + static int alredy_ifatch[NSN]; +#endif + snstop(is->id_unit); + + is->id_ointr = snintr; + + /* + * This is the value used for BASE + */ + sc->sn_io_addr = is->id_iobase; + + sc->pages_wanted = -1; + + printf("sn%d: ", is->id_unit); + + SMC_SELECT_BANK(3); + rev = inw(BASE + REVISION_REG_W); + if (chip_ids[(rev >> 4) & 0xF]) + printf("%s ", chip_ids[(rev >> 4) & 0xF]); + + SMC_SELECT_BANK(1); + i = inw(BASE + CONFIG_REG_W); + printf(i & CR_AUI_SELECT ? "AUI" : "UTP"); + + if (sn_import_macaddr[is->id_unit]) { + for (j = 0; j < 3; j++) { + u_short w; + + w = (u_short)sn_pccard_macaddr[is->id_unit][j * 2] | + (((u_short)sn_pccard_macaddr[is->id_unit][j * 2 + 1]) << 8); + outw(BASE + IAR_ADDR0_REG_W + j * 2, w); + } + } + + /* + * Read the station address from the chip. The MAC address is bank 1, + * regs 4 - 9 + */ + SMC_SELECT_BANK(1); + p = (u_char *) & sc->arpcom.ac_enaddr; + for (i = 0; i < 6; i += 2) { + address = inw(BASE + IAR_ADDR0_REG_W + i); + p[i + 1] = address >> 8; + p[i] = address & 0xFF; + } + printf(" MAC address %6D\n", sc->arpcom.ac_enaddr, ":"); + ifp->if_softc = sc; + ifp->if_unit = is->id_unit; + ifp->if_name = "sn"; + ifp->if_mtu = ETHERMTU; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; + ifp->if_output = ether_output; + ifp->if_start = snstart; + ifp->if_ioctl = snioctl; + ifp->if_watchdog = snwatchdog; + ifp->if_init = sninit; + + ifp->if_timer = 0; + +#if NCARD > 0 + if (alredy_ifatch[is->id_unit] != 1) { + if_attach( ifp ); + alredy_ifatch[is->id_unit] = 1; + } +#else + if_attach(ifp); +#endif + ether_ifattach(ifp); + /* + * Fill the hardware address into ifa_addr if we find an AF_LINK + * entry. We need to do this so bpf's can get the hardware addr of + * this card. netstat likes this too! + */ + ifa = TAILQ_FIRST(&ifp->if_addrhead); + while ((ifa != 0) && (ifa->ifa_addr != 0) && + (ifa->ifa_addr->sa_family != AF_LINK)) + ifa = TAILQ_NEXT(ifa, ifa_link); + + if ((ifa != 0) && (ifa->ifa_addr != 0)) { + sdl = (struct sockaddr_dl *) ifa->ifa_addr; + sdl->sdl_type = IFT_ETHER; + sdl->sdl_alen = ETHER_ADDR_LEN; + sdl->sdl_slen = 0; + bcopy(sc->arpcom.ac_enaddr, LLADDR(sdl), ETHER_ADDR_LEN); + } + + bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header)); + + return 1; +} + + +/* + * Reset and initialize the chip + */ +void +sninit(void *xsc) +{ + /* register struct sn_softc *sc = &sn_softc[unit]; */ + register struct sn_softc *sc = xsc; + register struct ifnet *ifp = &sc->arpcom.ac_if; + int s; + int flags; + int mask; + +#if NCARD > 0 + if (sc->gone) + return; +#endif + s = splimp(); + + /* + * This resets the registers mostly to defaults, but doesn't affect + * EEPROM. After the reset cycle, we pause briefly for the chip to + * be happy. + */ + SMC_SELECT_BANK(0); + outw(BASE + RECV_CONTROL_REG_W, RCR_SOFTRESET); + SMC_DELAY(); + outw(BASE + RECV_CONTROL_REG_W, 0x0000); + SMC_DELAY(); + SMC_DELAY(); + + outw(BASE + TXMIT_CONTROL_REG_W, 0x0000); + + /* + * Set the control register to automatically release succesfully + * transmitted packets (making the best use out of our limited + * memory) and to enable the EPH interrupt on certain TX errors. + */ + SMC_SELECT_BANK(1); + outw(BASE + CONTROL_REG_W, (CTR_AUTO_RELEASE | CTR_TE_ENABLE | + CTR_CR_ENABLE | CTR_LE_ENABLE)); + + /* Set squelch level to 240mV (default 480mV) */ + flags = inw(BASE + CONFIG_REG_W); + flags |= CR_SET_SQLCH; + outw(BASE + CONFIG_REG_W, flags); + + /* + * Reset the MMU and wait for it to be un-busy. + */ + SMC_SELECT_BANK(2); + outw(BASE + MMU_CMD_REG_W, MMUCR_RESET); + while (inw(BASE + MMU_CMD_REG_W) & MMUCR_BUSY) /* NOTHING */ + ; + + /* + * Disable all interrupts + */ + outb(BASE + INTR_MASK_REG_B, 0x00); + + sn_setmcast(sc); + + /* + * Set the transmitter control. We want it enabled. + */ + flags = TCR_ENABLE; + +#ifndef SW_PAD + /* + * I (GB) have been unlucky getting this to work. + */ + flags |= TCR_PAD_ENABLE; +#endif /* SW_PAD */ + + outw(BASE + TXMIT_CONTROL_REG_W, flags); + + + /* + * Now, enable interrupts + */ + SMC_SELECT_BANK(2); + + mask = IM_EPH_INT | + IM_RX_OVRN_INT | + IM_RCV_INT | + IM_TX_INT; + + outb(BASE + INTR_MASK_REG_B, mask); + sc->intr_mask = mask; + sc->pages_wanted = -1; + + + /* + * Mark the interface running but not active. + */ + ifp->if_flags |= IFF_RUNNING; + ifp->if_flags &= ~IFF_OACTIVE; + + /* + * Attempt to push out any waiting packets. + */ + snstart(ifp); + + splx(s); +} + + +void +snstart(struct ifnet *ifp) +{ + register struct sn_softc *sc = &sn_softc[ifp->if_unit]; + register u_int len; + register struct mbuf *m; + struct mbuf *top; + int s, pad; + int mask; + u_short length; + u_short numPages; + u_char packet_no; + int time_out; + +#if NCARD > 0 + if (sc->gone) + return; +#endif + + s = splimp(); + + if (sc->arpcom.ac_if.if_flags & IFF_OACTIVE) { + splx(s); + return; + } + if (sc->pages_wanted != -1) { + splx(s); + printf("sn%d: snstart() while memory allocation pending\n", + ifp->if_unit); + return; + } +startagain: + + /* + * Sneak a peek at the next packet + */ + m = sc->arpcom.ac_if.if_snd.ifq_head; + if (m == 0) { + splx(s); + return; + } + /* + * Compute the frame length and set pad to give an overall even + * number of bytes. Below we assume that the packet length is even. + */ + for (len = 0, top = m; m; m = m->m_next) + len += m->m_len; + + pad = (len & 1); + + /* + * We drop packets that are too large. Perhaps we should truncate + * them instead? + */ + if (len + pad > ETHER_MAX_LEN - ETHER_CRC_LEN) { + + printf("sn%d: large packet discarded (A)\n", ifp->if_unit); + + ++sc->arpcom.ac_if.if_oerrors; + IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m); + m_freem(m); + goto readcheck; + } +#ifdef SW_PAD + + /* + * If HW padding is not turned on, then pad to ETHER_MIN_LEN. + */ + if (len < ETHER_MIN_LEN - ETHER_CRC_LEN) + pad = ETHER_MIN_LEN - ETHER_CRC_LEN - len; + +#endif /* SW_PAD */ + + length = pad + len; + + /* + * The MMU wants the number of pages to be the number of 256 byte + * 'pages', minus 1 (A packet can't ever have 0 pages. We also + * include space for the status word, byte count and control bytes in + * the allocation request. + */ + numPages = (length + 6) >> 8; + + + /* + * Now, try to allocate the memory + */ + SMC_SELECT_BANK(2); + outw(BASE + MMU_CMD_REG_W, MMUCR_ALLOC | numPages); + + /* + * Wait a short amount of time to see if the allocation request + * completes. Otherwise, I enable the interrupt and wait for + * completion asyncronously. + */ + + time_out = MEMORY_WAIT_TIME; + do { + if (inb(BASE + INTR_STAT_REG_B) & IM_ALLOC_INT) + break; + } while (--time_out); + + if (!time_out) { + + /* + * No memory now. Oh well, wait until the chip finds memory + * later. Remember how many pages we were asking for and + * enable the allocation completion interrupt. Also set a + * watchdog in case we miss the interrupt. We mark the + * interface active since there is no point in attempting an + * snstart() until after the memory is available. + */ + mask = inb(BASE + INTR_MASK_REG_B) | IM_ALLOC_INT; + outb(BASE + INTR_MASK_REG_B, mask); + sc->intr_mask = mask; + + sc->arpcom.ac_if.if_timer = 1; + sc->arpcom.ac_if.if_flags |= IFF_OACTIVE; + sc->pages_wanted = numPages; + + splx(s); + return; + } + /* + * The memory allocation completed. Check the results. + */ + packet_no = inb(BASE + ALLOC_RESULT_REG_B); + if (packet_no & ARR_FAILED) { + printf("sn%d: Memory allocation failed\n", ifp->if_unit); + goto startagain; + } + /* + * We have a packet number, so tell the card to use it. + */ + outb(BASE + PACKET_NUM_REG_B, packet_no); + + /* + * Point to the beginning of the packet + */ + outw(BASE + POINTER_REG_W, PTR_AUTOINC | 0x0000); + + /* + * Send the packet length (+6 for status, length and control byte) + * and the status word (set to zeros) + */ + outw(BASE + DATA_REG_W, 0); + outb(BASE + DATA_REG_B, (length + 6) & 0xFF); + outb(BASE + DATA_REG_B, (length + 6) >> 8); + + /* + * Get the packet from the kernel. This will include the Ethernet + * frame header, MAC Addresses etc. + */ + IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m); + + /* + * Push out the data to the card. + */ + for (top = m; m != 0; m = m->m_next) { + + /* + * Push out words. + */ + outsw(BASE + DATA_REG_W, mtod(m, caddr_t), m->m_len / 2); + + /* + * Push out remaining byte. + */ + if (m->m_len & 1) + outb(BASE + DATA_REG_B, *(mtod(m, caddr_t) + m->m_len - 1)); + } + + /* + * Push out padding. + */ + while (pad > 1) { + outw(BASE + DATA_REG_W, 0); + pad -= 2; + } + if (pad) + outb(BASE + DATA_REG_B, 0); + + /* + * Push out control byte and unused packet byte The control byte is 0 + * meaning the packet is even lengthed and no special CRC handling is + * desired. + */ + outw(BASE + DATA_REG_W, 0); + + /* + * Enable the interrupts and let the chipset deal with it Also set a + * watchdog in case we miss the interrupt. + */ + mask = inb(BASE + INTR_MASK_REG_B) | (IM_TX_INT | IM_TX_EMPTY_INT); + outb(BASE + INTR_MASK_REG_B, mask); + sc->intr_mask = mask; + + outw(BASE + MMU_CMD_REG_W, MMUCR_ENQUEUE); + + sc->arpcom.ac_if.if_flags |= IFF_OACTIVE; + sc->arpcom.ac_if.if_timer = 1; + + if (ifp->if_bpf) { + bpf_mtap(ifp, top); + } + + sc->arpcom.ac_if.if_opackets++; + m_freem(top); + + +readcheck: + + /* + * Is another packet coming in? We don't want to overflow the tiny + * RX FIFO. If nothing has arrived then attempt to queue another + * transmit packet. + */ + if (inw(BASE + FIFO_PORTS_REG_W) & FIFO_REMPTY) + goto startagain; + + splx(s); + return; +} + + + +/* Resume a packet transmit operation after a memory allocation + * has completed. + * + * This is basically a hacked up copy of snstart() which handles + * a completed memory allocation the same way snstart() does. + * It then passes control to snstart to handle any other queued + * packets. + */ +static void +snresume(struct ifnet *ifp) +{ + register struct sn_softc *sc = &sn_softc[ifp->if_unit]; + register u_int len; + register struct mbuf *m; + struct mbuf *top; + int pad; + int mask; + u_short length; + u_short numPages; + u_short pages_wanted; + u_char packet_no; + + if (sc->pages_wanted < 0) + return; + + pages_wanted = sc->pages_wanted; + sc->pages_wanted = -1; + + /* + * Sneak a peek at the next packet + */ + m = sc->arpcom.ac_if.if_snd.ifq_head; + if (m == 0) { + printf("sn%d: snresume() with nothing to send\n", ifp->if_unit); + return; + } + /* + * Compute the frame length and set pad to give an overall even + * number of bytes. Below we assume that the packet length is even. + */ + for (len = 0, top = m; m; m = m->m_next) + len += m->m_len; + + pad = (len & 1); + + /* + * We drop packets that are too large. Perhaps we should truncate + * them instead? + */ + if (len + pad > ETHER_MAX_LEN - ETHER_CRC_LEN) { + + printf("sn%d: large packet discarded (B)\n", ifp->if_unit); + + ++sc->arpcom.ac_if.if_oerrors; + IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m); + m_freem(m); + return; + } +#ifdef SW_PAD + + /* + * If HW padding is not turned on, then pad to ETHER_MIN_LEN. + */ + if (len < ETHER_MIN_LEN - ETHER_CRC_LEN) + pad = ETHER_MIN_LEN - ETHER_CRC_LEN - len; + +#endif /* SW_PAD */ + + length = pad + len; + + + /* + * The MMU wants the number of pages to be the number of 256 byte + * 'pages', minus 1 (A packet can't ever have 0 pages. We also + * include space for the status word, byte count and control bytes in + * the allocation request. + */ + numPages = (length + 6) >> 8; + + + SMC_SELECT_BANK(2); + + /* + * The memory allocation completed. Check the results. If it failed, + * we simply set a watchdog timer and hope for the best. + */ + packet_no = inb(BASE + ALLOC_RESULT_REG_B); + if (packet_no & ARR_FAILED) { + + printf("sn%d: Memory allocation failed. Weird.\n", ifp->if_unit); + + sc->arpcom.ac_if.if_timer = 1; + + goto try_start; + return; + } + /* + * We have a packet number, so tell the card to use it. + */ + outb(BASE + PACKET_NUM_REG_B, packet_no); + + /* + * Now, numPages should match the pages_wanted recorded when the + * memory allocation was initiated. + */ + if (pages_wanted != numPages) { + + printf("sn%d: memory allocation wrong size. Weird.\n", ifp->if_unit); + + /* + * If the allocation was the wrong size we simply release the + * memory once it is granted. Wait for the MMU to be un-busy. + */ + while (inw(BASE + MMU_CMD_REG_W) & MMUCR_BUSY) /* NOTHING */ + ; + outw(BASE + MMU_CMD_REG_W, MMUCR_FREEPKT); + + return; + } + /* + * Point to the beginning of the packet + */ + outw(BASE + POINTER_REG_W, PTR_AUTOINC | 0x0000); + + /* + * Send the packet length (+6 for status, length and control byte) + * and the status word (set to zeros) + */ + outw(BASE + DATA_REG_W, 0); + outb(BASE + DATA_REG_B, (length + 6) & 0xFF); + outb(BASE + DATA_REG_B, (length + 6) >> 8); + + /* + * Get the packet from the kernel. This will include the Ethernet + * frame header, MAC Addresses etc. + */ + IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m); + + /* + * Push out the data to the card. + */ + for (top = m; m != 0; m = m->m_next) { + + /* + * Push out words. + */ + outsw(BASE + DATA_REG_W, mtod(m, caddr_t), m->m_len / 2); + + /* + * Push out remaining byte. + */ + if (m->m_len & 1) + outb(BASE + DATA_REG_B, *(mtod(m, caddr_t) + m->m_len - 1)); + } + + /* + * Push out padding. + */ + while (pad > 1) { + outw(BASE + DATA_REG_W, 0); + pad -= 2; + } + if (pad) + outb(BASE + DATA_REG_B, 0); + + /* + * Push out control byte and unused packet byte The control byte is 0 + * meaning the packet is even lengthed and no special CRC handling is + * desired. + */ + outw(BASE + DATA_REG_W, 0); + + /* + * Enable the interrupts and let the chipset deal with it Also set a + * watchdog in case we miss the interrupt. + */ + mask = inb(BASE + INTR_MASK_REG_B) | (IM_TX_INT | IM_TX_EMPTY_INT); + outb(BASE + INTR_MASK_REG_B, mask); + sc->intr_mask = mask; + outw(BASE + MMU_CMD_REG_W, MMUCR_ENQUEUE); + + if (ifp->if_bpf) { + bpf_mtap(ifp, top); + } + + sc->arpcom.ac_if.if_opackets++; + m_freem(top); + +try_start: + + /* + * Now pass control to snstart() to queue any additional packets + */ + sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; + snstart(ifp); + + /* + * We've sent something, so we're active. Set a watchdog in case the + * TX_EMPTY interrupt is lost. + */ + sc->arpcom.ac_if.if_flags |= IFF_OACTIVE; + sc->arpcom.ac_if.if_timer = 1; + + return; +} + + +void +snintr(int unit) +{ + int status, interrupts; + register struct sn_softc *sc = &sn_softc[unit]; + struct ifnet *ifp = &sc->arpcom.ac_if; + int x; + + /* + * Chip state registers + */ + u_char mask; + u_char packet_no; + u_short tx_status; + u_short card_stats; + +#if NCARD > 0 + if (sc->gone) + return; +#endif + + /* + * if_ep.c did this, so I do too. Yet if_ed.c doesn't. I wonder... + */ + x = splbio(); + + /* + * Clear the watchdog. + */ + ifp->if_timer = 0; + + SMC_SELECT_BANK(2); + + /* + * Obtain the current interrupt mask and clear the hardware mask + * while servicing interrupts. + */ + mask = inb(BASE + INTR_MASK_REG_B); + outb(BASE + INTR_MASK_REG_B, 0x00); + + /* + * Get the set of interrupts which occurred and eliminate any which + * are masked. + */ + interrupts = inb(BASE + INTR_STAT_REG_B); + status = interrupts & mask; + + /* + * Now, process each of the interrupt types. + */ + + /* + * Receive Overrun. + */ + if (status & IM_RX_OVRN_INT) { + + /* + * Acknowlege Interrupt + */ + SMC_SELECT_BANK(2); + outb(BASE + INTR_ACK_REG_B, IM_RX_OVRN_INT); + + ++sc->arpcom.ac_if.if_ierrors; + } + /* + * Got a packet. + */ + if (status & IM_RCV_INT) { +#if 1 + int packet_number; + + SMC_SELECT_BANK(2); + packet_number = inw(BASE + FIFO_PORTS_REG_W); + + if (packet_number & FIFO_REMPTY) { + + /* + * we got called , but nothing was on the FIFO + */ + printf("sn: Receive interrupt with nothing on FIFO\n"); + + goto out; + } +#endif + snread(ifp); + } + /* + * An on-card memory allocation came through. + */ + if (status & IM_ALLOC_INT) { + + /* + * Disable this interrupt. + */ + mask &= ~IM_ALLOC_INT; + sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; + snresume(&sc->arpcom.ac_if); + } + /* + * TX Completion. Handle a transmit error message. This will only be + * called when there is an error, because of the AUTO_RELEASE mode. + */ + if (status & IM_TX_INT) { + + /* + * Acknowlege Interrupt + */ + SMC_SELECT_BANK(2); + outb(BASE + INTR_ACK_REG_B, IM_TX_INT); + + packet_no = inw(BASE + FIFO_PORTS_REG_W); + packet_no &= FIFO_TX_MASK; + + /* + * select this as the packet to read from + */ + outb(BASE + PACKET_NUM_REG_B, packet_no); + + /* + * Position the pointer to the first word from this packet + */ + outw(BASE + POINTER_REG_W, PTR_AUTOINC | PTR_READ | 0x0000); + + /* + * Fetch the TX status word. The value found here will be a + * copy of the EPH_STATUS_REG_W at the time the transmit + * failed. + */ + tx_status = inw(BASE + DATA_REG_W); + + if (tx_status & EPHSR_TX_SUC) { + printf("sn%d: Successful packet caused interrupt\n", unit); + } else { + ++sc->arpcom.ac_if.if_oerrors; + } + + if (tx_status & EPHSR_LATCOL) + ++sc->arpcom.ac_if.if_collisions; + + /* + * Some of these errors will have disabled transmit. + * Re-enable transmit now. + */ + SMC_SELECT_BANK(0); + +#ifdef SW_PAD + outw(BASE + TXMIT_CONTROL_REG_W, TCR_ENABLE); +#else + outw(BASE + TXMIT_CONTROL_REG_W, TCR_ENABLE | TCR_PAD_ENABLE); +#endif /* SW_PAD */ + + /* + * kill the failed packet. Wait for the MMU to be un-busy. + */ + SMC_SELECT_BANK(2); + while (inw(BASE + MMU_CMD_REG_W) & MMUCR_BUSY) /* NOTHING */ + ; + outw(BASE + MMU_CMD_REG_W, MMUCR_FREEPKT); + + /* + * Attempt to queue more transmits. + */ + sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; + snstart(&sc->arpcom.ac_if); + } + /* + * Transmit underrun. We use this opportunity to update transmit + * statistics from the card. + */ + if (status & IM_TX_EMPTY_INT) { + + /* + * Acknowlege Interrupt + */ + SMC_SELECT_BANK(2); + outb(BASE + INTR_ACK_REG_B, IM_TX_EMPTY_INT); + + /* + * Disable this interrupt. + */ + mask &= ~IM_TX_EMPTY_INT; + + SMC_SELECT_BANK(0); + card_stats = inw(BASE + COUNTER_REG_W); + + /* + * Single collisions + */ + sc->arpcom.ac_if.if_collisions += card_stats & ECR_COLN_MASK; + + /* + * Multiple collisions + */ + sc->arpcom.ac_if.if_collisions += (card_stats & ECR_MCOLN_MASK) >> 4; + + SMC_SELECT_BANK(2); + + /* + * Attempt to enqueue some more stuff. + */ + sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; + snstart(&sc->arpcom.ac_if); + } + /* + * Some other error. Try to fix it by resetting the adapter. + */ + if (status & IM_EPH_INT) { + snstop(unit); + sninit(sc); + } + +out: + /* + * Handled all interrupt sources. + */ + + SMC_SELECT_BANK(2); + + /* + * Reestablish interrupts from mask which have not been deselected + * during this interrupt. Note that the hardware mask, which was set + * to 0x00 at the start of this service routine, may have been + * updated by one or more of the interrupt handers and we must let + * those new interrupts stay enabled here. + */ + mask |= inb(BASE + INTR_MASK_REG_B); + outb(BASE + INTR_MASK_REG_B, mask); + sc->intr_mask = mask; + + splx(x); +} + +void +snread(register struct ifnet *ifp) +{ + struct sn_softc *sc = &sn_softc[ifp->if_unit]; + struct ether_header *eh; + struct mbuf *m; + short status; + int packet_number; + u_short packet_length; + u_char *data; + + SMC_SELECT_BANK(2); +#if 0 + packet_number = inw(BASE + FIFO_PORTS_REG_W); + + if (packet_number & FIFO_REMPTY) { + + /* + * we got called , but nothing was on the FIFO + */ + printf("sn: Receive interrupt with nothing on FIFO\n"); + return; + } +#endif +read_another: + + /* + * Start reading from the start of the packet. Since PTR_RCV is set, + * packet number is found in FIFO_PORTS_REG_W, FIFO_RX_MASK. + */ + outw(BASE + POINTER_REG_W, PTR_READ | PTR_RCV | PTR_AUTOINC | 0x0000); + + /* + * First two words are status and packet_length + */ + status = inw(BASE + DATA_REG_W); + packet_length = inw(BASE + DATA_REG_W) & RLEN_MASK; + + /* + * The packet length contains 3 extra words: status, length, and a + * extra word with the control byte. + */ + packet_length -= 6; + + /* + * Account for receive errors and discard. + */ + if (status & RS_ERRORS) { + ++sc->arpcom.ac_if.if_ierrors; + goto out; + } + /* + * A packet is received. + */ + + /* + * Adjust for odd-length packet. + */ + if (status & RS_ODDFRAME) + packet_length++; + + /* + * Allocate a header mbuf from the kernel. + */ + MGETHDR(m, M_DONTWAIT, MT_DATA); + if (m == NULL) + goto out; + + m->m_pkthdr.rcvif = &sc->arpcom.ac_if; + m->m_pkthdr.len = m->m_len = packet_length; + + /* + * Attach an mbuf cluster + */ + MCLGET(m, M_DONTWAIT); + + /* + * Insist on getting a cluster + */ + if ((m->m_flags & M_EXT) == 0) { + m_freem(m); + ++sc->arpcom.ac_if.if_ierrors; + printf("sn: snread() kernel memory allocation problem\n"); + goto out; + } + eh = mtod(m, struct ether_header *); + + /* + * Get packet, including link layer address, from interface. + */ + + data = (u_char *) eh; + insw(BASE + DATA_REG_W, data, packet_length >> 1); + if (packet_length & 1) { + data += packet_length & ~1; + *data = inb(BASE + DATA_REG_B); + } + ++sc->arpcom.ac_if.if_ipackets; + + if (sc->arpcom.ac_if.if_bpf) + { + bpf_mtap(&sc->arpcom.ac_if, m); + + /* + * Note that the interface cannot be in promiscuous mode if + * there are no BPF listeners. And if we are in promiscuous + * mode, we have to check if this packet is really ours. + */ + if ((sc->arpcom.ac_if.if_flags & IFF_PROMISC) && + (eh->ether_dhost[0] & 1) == 0 && + bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr, + sizeof(eh->ether_dhost)) != 0 && + bcmp(eh->ether_dhost, etherbroadcastaddr, + sizeof(eh->ether_dhost)) != 0) { + m_freem(m); + goto out; + } + } + + /* + * Remove link layer addresses and whatnot. + */ + m->m_pkthdr.len = m->m_len = packet_length - sizeof(struct ether_header); + m->m_data += sizeof(struct ether_header); + + ether_input(&sc->arpcom.ac_if, eh, m); + +out: + + /* + * Error or good, tell the card to get rid of this packet Wait for + * the MMU to be un-busy. + */ + SMC_SELECT_BANK(2); + while (inw(BASE + MMU_CMD_REG_W) & MMUCR_BUSY) /* NOTHING */ + ; + outw(BASE + MMU_CMD_REG_W, MMUCR_RELEASE); + + /* + * Check whether another packet is ready + */ + packet_number = inw(BASE + FIFO_PORTS_REG_W); + if (packet_number & FIFO_REMPTY) { + return; + } + goto read_another; +} + + +/* + * Handle IOCTLS. This function is completely stolen from if_ep.c + * As with its progenitor, it does not handle hardware address + * changes. + */ +static int +snioctl(register struct ifnet *ifp, u_long cmd, caddr_t data) +{ + struct sn_softc *sc = &sn_softc[ifp->if_unit]; + int s, error = 0; +#if !defined(__FreeBSD__) || __FreeBSD_version < 300000 + struct ifreq *ifr = (struct ifreq *) data; +#endif + +#if NCARD > 0 + if (sc->gone) { + ifp->if_flags &= ~IFF_RUNNING; + return ENXIO; + } +#endif + + s = splimp(); + + switch (cmd) { + case SIOCSIFADDR: + case SIOCGIFADDR: + case SIOCSIFMTU: + error = ether_ioctl(ifp, cmd, data); + break; + + case SIOCSIFFLAGS: + if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_flags & IFF_RUNNING) { + ifp->if_flags &= ~IFF_RUNNING; + snstop(ifp->if_unit); + break; + } else { + /* reinitialize card on any parameter change */ + sninit(sc); + break; + } + break; + +#ifdef notdef + case SIOCGHWADDR: + bcopy((caddr_t) sc->sc_addr, (caddr_t) & ifr->ifr_data, + sizeof(sc->sc_addr)); + break; +#endif + + case SIOCADDMULTI: +#if defined(__FreeBSD__) && __FreeBSD_version >= 300000 + /* update multicast filter list. */ + sn_setmcast(sc); + error = 0; +#else + error = ether_addmulti(ifr, &sc->arpcom); + if (error == ENETRESET) { + /* update multicast filter list. */ + sn_setmcast(sc); + error = 0; + } +#endif + break; + case SIOCDELMULTI: +#if defined(__FreeBSD__) && __FreeBSD_version >= 300000 + /* update multicast filter list. */ + sn_setmcast(sc); + error = 0; +#else + error = ether_delmulti(ifr, &sc->arpcom); + if (error == ENETRESET) { + /* update multicast filter list. */ + sn_setmcast(sc); + error = 0; + } +#endif + break; + default: + error = EINVAL; + } + + splx(s); + + return (error); +} + +void +snreset(int unit) +{ + int s; + struct sn_softc *sc = &sn_softc[unit]; + +#if NCARD > 0 + if (sc->gone) + return; +#endif + s = splimp(); + snstop(unit); + sninit(sc); + + splx(s); +} + +void +snwatchdog(struct ifnet *ifp) +{ + int s; +#if NCARD > 0 + struct sn_softc *sc = &sn_softc[ifp->if_unit]; + + if (sc->gone) + return; +#endif + s = splimp(); + snintr(ifp->if_unit); + splx(s); +} + + +/* 1. zero the interrupt mask + * 2. clear the enable receive flag + * 3. clear the enable xmit flags + */ +void +snstop(int unit) +{ + struct sn_softc *sc = &sn_softc[unit]; + struct ifnet *ifp = &sc->arpcom.ac_if; + +#if NCARD > 0 + if (sc->gone) + return; +#endif + /* + * Clear interrupt mask; disable all interrupts. + */ + SMC_SELECT_BANK(2); + outb(BASE + INTR_MASK_REG_B, 0x00); + + /* + * Disable transmitter and Receiver + */ + SMC_SELECT_BANK(0); + outw(BASE + RECV_CONTROL_REG_W, 0x0000); + outw(BASE + TXMIT_CONTROL_REG_W, 0x0000); + + /* + * Cancel watchdog. + */ + ifp->if_timer = 0; +} + + + +/* + * Function: smc_probe( int ioaddr, int pccard ) + * + * Purpose: + * Tests to see if a given ioaddr points to an SMC9xxx chip. + * Tries to cause as little damage as possible if it's not a SMC chip. + * Returns a 0 on success + * + * Algorithm: + * (1) see if the high byte of BANK_SELECT is 0x33 + * (2) compare the ioaddr with the base register's address + * (3) see if I recognize the chip ID in the appropriate register + * + * + */ +static int +smc_probe(int ioaddr, int pccard) +{ + u_int bank; + u_short revision_register; + u_short base_address_register; + + /* + * First, see if the high byte is 0x33 + */ + bank = inw(ioaddr + BANK_SELECT_REG_W); + if ((bank & BSR_DETECT_MASK) != BSR_DETECT_VALUE) { +#ifdef SN_DEBUG +printf("test1 failed\n"); +#endif + return -ENODEV; + } + /* + * The above MIGHT indicate a device, but I need to write to further + * test this. Go to bank 0, then test that the register still + * reports the high byte is 0x33. + */ + outw(ioaddr + BANK_SELECT_REG_W, 0x0000); + bank = inw(ioaddr + BANK_SELECT_REG_W); + if ((bank & BSR_DETECT_MASK) != BSR_DETECT_VALUE) { +#ifdef SN_DEBUG +printf("test2 failed\n"); +#endif + return -ENODEV; + } + /* + * well, we've already written once, so hopefully another time won't + * hurt. This time, I need to switch the bank register to bank 1, so + * I can access the base address register. The contents of the + * BASE_ADDR_REG_W register, after some jiggery pokery, is expected + * to match the I/O port address where the adapter is being probed. + */ + outw(ioaddr + BANK_SELECT_REG_W, 0x0001); + base_address_register = inw(ioaddr + BASE_ADDR_REG_W); + + /* + * This test is nonsence on PC-card architecture, so if + * pccard == 1, skip this test. (hosokawa) + */ + if (!pccard && (ioaddr != (base_address_register >> 3 & 0x3E0))) { + + /* + * Well, the base address register didn't match. Must not + * have been a SMC chip after all. + */ + /* + * printf("sn: ioaddr %x doesn't match card configuration + * (%x)\n", ioaddr, base_address_register >> 3 & 0x3E0 ); + */ + +#ifdef SN_DEBUG +printf("test3 failed ioaddr = 0x%x, base_address_register = 0x%x\n", + ioaddr, base_address_register >> 3 & 0x3E0); +#endif + return -ENODEV; + } + /* + * Check if the revision register is something that I recognize. + * These might need to be added to later, as future revisions could + * be added. + */ + outw(ioaddr + BANK_SELECT_REG_W, 0x3); + revision_register = inw(ioaddr + REVISION_REG_W); + if (!chip_ids[(revision_register >> 4) & 0xF]) { + + /* + * I don't regonize this chip, so... + */ + /* + * printf("sn: ioaddr %x unrecognized revision register: + * %x\n", ioaddr, revision_register ); + */ + +#ifdef SN_DEBUG +printf("test4 failed\n"); +#endif + return -ENODEV; + } + /* + * at this point I'll assume that the chip is an SMC9xxx. It might be + * prudent to check a listing of MAC addresses against the hardware + * address, or do some other tests. + */ + return 0; +} + +#define MCFSZ 8 + +static void +sn_setmcast(struct sn_softc *sc) +{ + struct ifnet *ifp = (struct ifnet *)sc; + int flags; + + /* + * Set the receiver filter. We want receive enabled and auto strip + * of CRC from received packet. If we are promiscuous then set that + * bit too. + */ + flags = RCR_ENABLE | RCR_STRIP_CRC; + + if (ifp->if_flags & IFF_PROMISC) { + flags |= RCR_PROMISC | RCR_ALMUL; + } else if (ifp->if_flags & IFF_ALLMULTI) { + flags |= RCR_ALMUL; + } else { + u_char mcf[MCFSZ]; + if (sn_getmcf(&sc->arpcom, mcf)) { + /* set filter */ + SMC_SELECT_BANK(3); + outw(BASE + MULTICAST1_REG_W, + ((u_short)mcf[1] << 8) | mcf[0]); + outw(BASE + MULTICAST2_REG_W, + ((u_short)mcf[3] << 8) | mcf[2]); + outw(BASE + MULTICAST3_REG_W, + ((u_short)mcf[5] << 8) | mcf[4]); + outw(BASE + MULTICAST4_REG_W, + ((u_short)mcf[7] << 8) | mcf[6]); + } else { + flags |= RCR_ALMUL; + } + } + SMC_SELECT_BANK(0); + outw(BASE + RECV_CONTROL_REG_W, flags); +} + +#if defined(__FreeBSD__) && __FreeBSD_version >= 300000 +static int +sn_getmcf(struct arpcom *ac, u_char *mcf) +{ + int i; + register u_int index, index2; + register u_char *af = (u_char *) mcf; + struct ifmultiaddr *ifma; + + bzero(mcf, MCFSZ); + + for (ifma = ac->ac_if.if_multiaddrs.lh_first; ifma; + ifma = ifma->ifma_link.le_next) { + if (ifma->ifma_addr->sa_family != AF_LINK) + return 0; + index = smc_crc(LLADDR((struct sockaddr_dl *)ifma->ifma_addr)) & 0x3f; + index2 = 0; + for (i = 0; i < 6; i++) { + index2 <<= 1; + index2 |= (index & 0x01); + index >>= 1; + } + af[index2 >> 3] |= 1 << (index2 & 7); + } + return 1; /* use multicast filter */ +} +#else +static int +sn_getmcf(struct arpcom *ac, u_char *mcf) +{ + int i; + struct ether_multi *enm; + struct ether_multistep step; + u_int a, b; + + bzero(mcf, MCFSZ); + ETHER_FIRST_MULTI(step, ac, enm); + while (enm) { + if (bcmp(enm->enm_addrlo, enm->enm_addrhi, 6) != 0) { + /* impossible to hash */ + bzero(mcf, MCFSZ); + return 0; + } + a = smc_crc(enm->enm_addrlo) & 0x3f; + b = 0; + for (i=0; i < 6; i++) { + b <<= 1; + b |= (a & 0x01); + a >>= 1; + } + mcf[b >> 3] |= 1 << (b & 7); + ETHER_NEXT_MULTI(step, enm); + } + return 1; /* use multicast filter */ +} +#endif + +static u_int +smc_crc(u_char *s) +{ + int perByte; + int perBit; + const u_int poly = 0xedb88320; + u_int v = 0xffffffff; + u_char c; + + for (perByte = 0; perByte < ETHER_ADDR_LEN; perByte++) { + c = s[perByte]; + for (perBit = 0; perBit < 8; perBit++) { + v = (v >> 1)^(((v ^ c) & 0x01) ? poly : 0); + c >>= 1; + } + } + return v; +} +#endif diff --git a/sys/dev/sn/if_snreg.h b/sys/dev/sn/if_snreg.h new file mode 100644 index 0000000..e3406c1 --- /dev/null +++ b/sys/dev/sn/if_snreg.h @@ -0,0 +1,447 @@ +/* + * Copyright (c) 1996 Gardner Buchanan <gbuchanan@shl.com> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Gardner Buchanan. + * 4. The name of Gardner Buchanan may not be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * This file contains register information and access macros for + * the SMC91xxx chipset. + * + * Information contained in this file was obtained from the SMC91C92 + * and SMC91C94 manuals from SMC. You will need one of these in order + * to make any meaningful changes to this driver. Information about + * obtaining one can be found at http://www.smc.com in the components + * division. + * + * This FreeBSD driver is derived in part from the smc9194 Linux driver + * by Erik Stahlman and is Copyright (C) 1996 by Erik Stahlman. + * It is also derived in part from the FreeBSD ep (3C509) driver which + * is Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) All rights + * reserved. + * + */ +#ifndef _IF_SNREG_H_ +#define _IF_SNREG_H_ + +#include <net/if_arp.h> + +/* + * Ethernet software status per interface. The first element MUST + * be the arpcom struct since the address of the arpcom struct is + * used as a backdoor to obtain the address of this whole structure + * in many cases. + */ +struct sn_softc { + struct arpcom arpcom; /* Ethernet common part */ + short sn_io_addr; /* i/o bus address (BASE) */ + int pages_wanted; /* Size of outstanding MMU ALLOC */ + int intr_mask; /* Most recently set interrupt mask */ +#if NCARD > 0 + int gone; +#endif /* NCARD > 0 */ +}; + + +/* + * Wait time for memory to be free. This probably shouldn't be + * tuned that much, as waiting for this means nothing else happens + * in the system + */ +#define MEMORY_WAIT_TIME 1000 + + +/* The SMC91xxx uses 16 I/O ports + */ +#define SMC_IO_EXTENT 16 + + +/* + * A description of the SMC registers is probably in order here, + * although for details, the SMC datasheet is invaluable. + * The data sheet I (GB) am using is "SMC91C92 Single Chip Ethernet + * Controller With RAM", Rev. 12/0/94. Constant definitions I give + * here are loosely based on the mnemonic names given to them in the + * data sheet, but there are many exceptions. + * + * Basically, the chip has 4 banks of registers (0 to 3), which + * are accessed by writing a number into the BANK_SELECT register + * (I also use a SMC_SELECT_BANK macro for this). Registers are + * either Byte or Word sized. My constant definitions end in _B + * or _W as appropriate. + * + * The banks are arranged so that for most purposes, bank 2 is all + * that is needed for normal run time tasks. + */ + +/* + * Bank Select Register. This also doubles as + * a chip identification register. This register + * is mapped at the same position in all banks. + */ +#define BANK_SELECT_REG_W 0x0e +#define BSR_DETECT_MASK 0xff00 +#define BSR_DETECT_VALUE 0x3300 + + +/* BANK 0 + */ + +/* Transmit Control Register controls some aspects of the transmit + * behavior of the Ethernet Protocol Handler. + */ +#define TXMIT_CONTROL_REG_W 0x00 + +#define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */ +#define TCR_LOOP 0x0002 /* Enable internal analogue loopback */ +#define TCR_FORCOL 0x0004 /* Force Collision on next TX */ +#define TCR_PAD_ENABLE 0x0080 /* Pad short packets to 64 bytes */ +#define TCR_NOCRC 0x0100 /* Do not append CRC */ +#define TCR_MON_CSN 0x0400 /* monitors the carrier status */ +#define TCR_FDUPLX 0x0800 /* receive packets sent out */ +#define TCR_STP_SQET 0x1000 /* stop transmitting if Signal quality error */ +#define TCR_EPH_LOOP 0x2000 /* Enable internal digital loopback */ + + +/* Status of the last transmitted frame and instantaneous status of + * the Ethernet Protocol Handler jumbled together. In auto-release + * mode this information is simply discarded after each TX. This info + * is copied to the status word of in-memory packets after transmit + * where relevent statuses can be checked. + */ +#define EPH_STATUS_REG_W 0x02 + +#define EPHSR_TX_SUC 0x0001 /* Transmit was successful */ +#define EPHSR_SNGLCOL 0x0002 /* Single collision occurred */ +#define EPHSR_MULCOL 0x0004 /* Multiple Collisions occurred */ +#define EPHSR_LTX_MULT 0x0008 /* Transmit was a multicast */ +#define EPHSR_16COL 0x0010 /* 16 Collisions occurred, TX disabled */ +#define EPHSR_SQET 0x0020 /* SQE Test failed, TX disabled */ +#define EPHSR_LTX_BRD 0x0040 /* Transmit was a broadcast */ +#define EPHSR_DEFR 0x0080 /* TX deferred due to carrier det. */ +#define EPHSR_LATCOL 0x0200 /* Late collision detected, TX disabled */ +#define EPHSR_LOST_CAR 0x0400 /* Lost carrier sense, TX disabled */ +#define EPHSR_EXC_DEF 0x0800 /* Excessive deferrals in TX >2 MAXETHER + * times */ +#define EPHSR_CTR_ROL 0x1000 /* Some ECR Counter(s) rolled over */ +#define EPHSR_RX_OVRN 0x2000 /* Receiver overrun, packets dropped */ +#define EPHSR_LINK_OK 0x4000 /* Link integrity is OK */ +#define EPHSR_TXUNRN 0x8000 /* Transmit underrun */ + + +/* Receiver Control Register controls some aspects of the receive + * behavior of the Ethernet Protocol Handler. + */ +#define RECV_CONTROL_REG_W 0x04 + +#define RCR_RX_ABORT 0x0001 /* Received huge packet */ +#define RCR_PROMISC 0x0002 /* enable promiscuous mode */ +#define RCR_ALMUL 0x0004 /* receive all multicast packets */ +#define RCR_ENABLE 0x0100 /* IFF this is set, we can recieve packets */ +#define RCR_STRIP_CRC 0x0200 /* strips CRC */ +#define RCR_GAIN_BITS 0x0c00 /* PLL Gain control (for testing) */ +#define RCR_FILT_CAR 0x4000 /* Enable 12 bit carrier filter */ +#define RCR_SOFTRESET 0x8000 /* Resets the EPH logic */ + + +/* TX Statistics counters + */ +#define COUNTER_REG_W 0x06 + +#define ECR_COLN_MASK 0x000f /* Vanilla collisions */ +#define ECR_MCOLN_MASK 0x00f0 /* Multiple collisions */ +#define ECR_DTX_MASK 0x0f00 /* Deferred transmits */ +#define ECR_EXDTX_MASK 0xf000 /* Excessively deferred transmits */ + +/* Memory Information + */ +#define MEM_INFO_REG_W 0x08 + +#define MIR_FREE_MASK 0xff00 /* Free memory pages available */ +#define MIR_TOTAL_MASK 0x00ff /* Total memory pages available */ + +/* Memory Configuration + */ +#define MEM_CFG_REG_W 0x0a + +#define MCR_TXRSV_MASK 0x001f /* Count of pages reserved for transmit */ + + +/* Bank 0, Register 0x0c is unised in the SMC91C92 + */ + + +/* BANK 1 + */ + +/* Adapter configuration + */ +#define CONFIG_REG_W 0x00 + +#define CR_INT_SEL0 0x0002 /* Interrupt selector */ +#define CR_INT_SEL1 0x0004 /* Interrupt selector */ +#define CR_DIS_LINK 0x0040 /* Disable 10BaseT Link Test */ +#define CR_16BIT 0x0080 /* Bus width */ +#define CR_AUI_SELECT 0x0100 /* Use external (AUI) Transceiver */ +#define CR_SET_SQLCH 0x0200 /* Squelch level */ +#define CR_FULL_STEP 0x0400 /* AUI signalling mode */ +#define CR_NOW_WAIT_ST 0x1000 /* Disable bus wait states */ + +/* The contents of this port are used by the adapter + * to decode its I/O address. We use it as a varification + * that the adapter is detected properly when probing. + */ +#define BASE_ADDR_REG_W 0x02 /* The select IO Base addr. */ + +/* These registers hold the Ethernet MAC address. + */ +#define IAR_ADDR0_REG_W 0x04 /* My Ethernet address */ +#define IAR_ADDR1_REG_W 0x06 /* My Ethernet address */ +#define IAR_ADDR2_REG_W 0x08 /* My Ethernet address */ + +/* General purpose register used for talking to the EEPROM. + */ +#define GENERAL_REG_W 0x0a + +/* Control register used for talking to the EEPROM and + * setting some EPH functions. + */ +#define CONTROL_REG_W 0x0c +#define CTR_STORE 0x0001 /* Store something to EEPROM */ +#define CTR_RELOAD 0x0002 /* Read EEPROM into registers */ +#define CTR_EEPROM_SEL 0x0004 /* Select registers for Reload/Store */ +#define CTR_TE_ENABLE 0x0020 /* Enable TX Error detection via EPH_INT */ +#define CTR_CR_ENABLE 0x0040 /* Enable Counter Rollover via EPH_INT */ +#define CTR_LE_ENABLE 0x0080 /* Enable Link Error detection via EPH_INT */ +#define CTR_AUTO_RELEASE 0x0800 /* Enable auto release mode for TX */ +#define CTR_POWERDOWN 0x2000 /* Enter powerdown mode */ +#define CTR_RCV_BAD 0x4000 /* Enable receipt of frames with bad CRC */ + + +/* BANK 2 + */ + +/* Memory Management Unit Control Register + * Controls allocation of memory to receive and + * transmit functions. + */ +#define MMU_CMD_REG_W 0x00 +#define MMUCR_BUSY 0x0001 /* MMU busy performing a release */ + +/* MMU Commands: + */ +#define MMUCR_NOP 0x0000 /* Do nothing */ +#define MMUCR_ALLOC 0x0020 /* Or with number of 256 byte packets - 1 */ +#define MMUCR_RESET 0x0040 /* Reset MMU State */ +#define MMUCR_REMOVE 0x0060 /* Dequeue (but not free) current RX packet */ +#define MMUCR_RELEASE 0x0080 /* Dequeue and free the current RX packet */ +#define MMUCR_FREEPKT 0x00a0 /* Release packet in PNR register */ +#define MMUCR_ENQUEUE 0x00c0 /* Enqueue the packet for transmit */ +#define MMUCR_RESETTX 0x00e0 /* Reset transmit queues */ + +/* Packet Number at TX Area + */ +#define PACKET_NUM_REG_B 0x02 + +/* Packet number resulting from MMUCR_ALLOC + */ +#define ALLOC_RESULT_REG_B 0x03 +#define ARR_FAILED 0x80 + +/* Transmit and receive queue heads + */ +#define FIFO_PORTS_REG_W 0x04 +#define FIFO_REMPTY 0x8000 +#define FIFO_TEMPTY 0x0080 +#define FIFO_RX_MASK 0x7f00 +#define FIFO_TX_MASK 0x007f + +/* The address within the packet for reading/writing. The + * PTR_RCV bit is tricky. When PTR_RCV==1, the packet number + * to be read is found in the FIFO_PORTS_REG_W, FIFO_RX_MASK. + * When PTR_RCV==0, the packet number to be written is found + * in the PACKET_NUM_REG_B. + */ +#define POINTER_REG_W 0x06 +#define PTR_READ 0x2000 /* Intended access mode */ +#define PTR_AUTOINC 0x4000 /* Do auto inc after read/write */ +#define PTR_RCV 0x8000 /* FIFO_RX is packet, otherwise PNR is packet */ + +/* Data I/O register to be used in conjunction with + * The pointer register to read and write data from the + * card. The same register can be used for byte and word + * ops. + */ +#define DATA_REG_W 0x08 +#define DATA_REG_B 0x08 +#define DATA_1_REG_B 0x08 +#define DATA_2_REG_B 0x0a + +/* Sense interrupt status (READ) + */ +#define INTR_STAT_REG_B 0x0c + +/* Acknowledge interrupt sources (WRITE) + */ +#define INTR_ACK_REG_B 0x0c + +/* Interrupt mask. Bit set indicates interrupt allowed. + */ +#define INTR_MASK_REG_B 0x0d + +/* Interrupts + */ +#define IM_RCV_INT 0x01 /* A packet has been received */ +#define IM_TX_INT 0x02 /* Packet TX complete */ +#define IM_TX_EMPTY_INT 0x04 /* No packets left to TX */ +#define IM_ALLOC_INT 0x08 /* Memory allocation completed */ +#define IM_RX_OVRN_INT 0x10 /* Receiver was overrun */ +#define IM_EPH_INT 0x20 /* Misc. EPH conditions (see CONTROL_REG_W) */ +#define IM_ERCV_INT 0x40 /* not on SMC9192 */ + +/* BANK 3 + */ + +/* Multicast subscriptions. + * The multicast handling in the SMC90Cxx is quite complicated. A table + * of multicast address subscriptions is provided and a clever way of + * speeding the search of that table by hashing is implemented in the + * hardware. I have ignored this and simply subscribed to all multicasts + * and let the kernel deal with the results. + */ +#define MULTICAST1_REG_W 0x00 +#define MULTICAST2_REG_W 0x02 +#define MULTICAST3_REG_W 0x04 +#define MULTICAST4_REG_W 0x06 + +/* These registers do not exist on SMC9192, or at least + * are not documented in the SMC91C92 data sheet. + * The REVISION_REG_W register does however seem to work. + */ +#define MGMT_REG_W 0x08 +#define REVISION_REG_W 0x0a /* (hi: chip id low: rev #) */ +#define ERCV_REG_W 0x0c + +/* These are constants expected to be found in the + * chip id register. + */ +#define CHIP_9190 3 +#define CHIP_9194 4 +#define CHIP_9195 5 +#define CHIP_91100 7 + +static const char *chip_ids[15] = { + NULL, NULL, NULL, + /* 3 */ "SMC91C90/91C92", + /* 4 */ "SMC91C94", + /* 5 */ "SMC91C95", + NULL, + /* 7 */ "SMC91C100", + NULL, NULL, NULL, NULL, + NULL, NULL, NULL +}; + + +/* When packets are stuffed into the card or sucked out of the card + * they are set up more or less as follows: + * + * Addr msbyte lsbyte + * 00 SSSSSSSS SSSSSSSS - STATUS-WORD 16 bit TX or RX status + * 02 RRRRR - RESERVED (unused) + * 02 CCC CCCCCCCC - BYTE COUNT (RX: always even, TX: bit 0 ignored) + * 04 DDDDDDDD DDDDDDDD - DESTINATION ADDRESS + * 06 DDDDDDDD DDDDDDDD (48 bit Ethernet MAC Address) + * 08 DDDDDDDD DDDDDDDD + * 0A SSSSSSSS SSSSSSSS - SOURCE ADDRESS + * 0C SSSSSSSS SSSSSSSS (48 bit Ethernet MAC Address) + * 0E SSSSSSSS SSSSSSSS + * 10 PPPPPPPP PPPPPPPP + * .. PPPPPPPP PPPPPPPP + * C-2 CCCCCCCC - CONTROL BYTE + * C-2 PPPPPPPP - Last data byte (If odd length) + * + * The STATUS_WORD is derived from the EPH_STATUS_REG_W register + * during transmit and is composed of another set of bits described + * below during receive. + */ + + +/* Receive status bits. These values are found in the status word + * field of a received packet. For receive packets I use the RS_ODDFRAME + * to detect whether a frame has an extra byte on it. The CTLB_ODD + * bit of the control byte tells the same thing. + */ +#define RS_MULTICAST 0x0001 /* Packet is multicast */ +#define RS_HASH_MASK 0x007e /* Mask of multicast hash value */ +#define RS_TOOSHORT 0x0400 /* Frame was a runt, <64 bytes */ +#define RS_TOOLONG 0x0800 /* Frame was giant, >1518 */ +#define RS_ODDFRAME 0x1000 /* Frame is odd lengthed */ +#define RS_BADCRC 0x2000 /* Frame had CRC error */ +#define RS_ALGNERR 0x8000 /* Frame had alignment error */ +#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) + +#define RLEN_MASK 0x07ff /* Significant length bits in RX length */ + +/* The control byte has the following significant bits. + * For transmit, the CTLB_ODD bit specifies whether an extra byte + * is present in the frame. Bit 0 of the byte count field is + * ignored. I just pad every frame to even length and forget about + * it. + */ +#define CTLB_CRC 0x10 /* Add CRC for this packet (TX only) */ +#define CTLB_ODD 0x20 /* The packet length is ODD */ + + +/* + * I define some macros to make it easier to do somewhat common + * or slightly complicated, repeated tasks. + */ + +/* The base I/O address. + */ +#define BASE (sc->sn_io_addr) + +/* Select a register bank, 0 to 3 + */ +#define SMC_SELECT_BANK(x) { outw( BASE + BANK_SELECT_REG_W, (x) ); } + +/* Define a small delay for the reset + */ +#define SMC_DELAY() { inw( BASE + RECV_CONTROL_REG_W );\ + inw( BASE + RECV_CONTROL_REG_W );\ + inw( BASE + RECV_CONTROL_REG_W ); } + +/* Define flags + */ + +#define SN_FLAGS_PCCARD 0x0001 /* PCMCIA (PC-card) */ +#define SN_FLAGS_XJBT10 0x0002 /* Megahertz XJ-BT10 (PCMCIA) */ + +#endif /* _IF_SNREG_H_ */ diff --git a/sys/i386/conf/GENERIC b/sys/i386/conf/GENERIC index 731267f..508ef8d 100644 --- a/sys/i386/conf/GENERIC +++ b/sys/i386/conf/GENERIC @@ -187,6 +187,7 @@ device fe0 at isa? port 0x300 irq ? device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 irq ? +device sn0 at ias? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? port? irq ? diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT index 6dfc29c..952c690 100644 --- a/sys/i386/conf/LINT +++ b/sys/i386/conf/LINT @@ -1292,6 +1292,7 @@ device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device rdp0 at isa? port 0x378 irq 7 flags 2 device sr0 at isa? port 0x300 irq 5 iomem 0xd0000 +device sn0 at isa? port 0x300 irq 10 device wi0 options WLCACHE # enables the signal-strength cache options WLDEBUG # enables verbose debugging output diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index 6dfc29c..952c690 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -1292,6 +1292,7 @@ device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device rdp0 at isa? port 0x378 irq 7 flags 2 device sr0 at isa? port 0x300 irq 5 iomem 0xd0000 +device sn0 at isa? port 0x300 irq 10 device wi0 options WLCACHE # enables the signal-strength cache options WLDEBUG # enables verbose debugging output diff --git a/sys/i386/isa/isa_compat.h b/sys/i386/isa/isa_compat.h index c504b52..224d2562 100644 --- a/sys/i386/isa/isa_compat.h +++ b/sys/i386/isa/isa_compat.h @@ -39,6 +39,7 @@ #include "le.h" #include "lnc.h" #include "rdp.h" +#include "sn.h" #include "sr.h" #include "wl.h" #include "oltr.h" @@ -100,6 +101,7 @@ extern struct isa_driver iedriver; extern struct isa_driver ledriver; extern struct isa_driver lncdriver; extern struct isa_driver rdpdriver; +extern struct isa_driver sndriver; extern struct isa_driver srdriver; extern struct isa_driver wldriver; extern struct isa_driver oltrdriver; @@ -257,6 +259,9 @@ static struct old_isa_driver old_drivers[] = { #if NEL > 0 { INTR_TYPE_NET, &eldriver }, #endif +#if NSN > 0 + { INTR_TYPE_NET, &sndriver }, +#endif #if NSR > 0 { INTR_TYPE_NET, &srdriver }, #endif diff --git a/sys/pc98/pc98/isa_compat.h b/sys/pc98/pc98/isa_compat.h index e2a6c5a..368ecb7 100644 --- a/sys/pc98/pc98/isa_compat.h +++ b/sys/pc98/pc98/isa_compat.h @@ -40,6 +40,7 @@ #include "le.h" #include "lnc.h" #include "rdp.h" +#include "sn.h" #include "sr.h" #include "wl.h" #include "oltr.h" @@ -105,6 +106,7 @@ extern struct isa_driver iedriver; extern struct isa_driver ledriver; extern struct isa_driver lncdriver; extern struct isa_driver rdpdriver; +extern struct isa_driver sndriver; extern struct isa_driver srdriver; extern struct isa_driver wldriver; extern struct isa_driver oltrdriver; @@ -268,6 +270,9 @@ static struct old_isa_driver old_drivers[] = { #if NEL > 0 { INTR_TYPE_NET, &eldriver }, #endif +#if NSN > 0 + { INTR_TYPE_NET, &sndriver }, +#endif #if NSR > 0 { INTR_TYPE_NET, &srdriver }, #endif |