summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--sys/boot/i386/libi386/biosdisk.c110
1 files changed, 83 insertions, 27 deletions
diff --git a/sys/boot/i386/libi386/biosdisk.c b/sys/boot/i386/libi386/biosdisk.c
index bee8a52..36fd10a 100644
--- a/sys/boot/i386/libi386/biosdisk.c
+++ b/sys/boot/i386/libi386/biosdisk.c
@@ -48,6 +48,7 @@
#include <btxv86.h>
#include "libi386.h"
+#define BIOS_NUMDRIVES 0x475
#define BIOSDISK_SECSIZE 512
#define BUFSIZE (1 * BIOSDISK_SECSIZE)
#define MAXBDDEV MAXDEV
@@ -75,7 +76,7 @@ struct open_disk {
#define BD_MODEINT13 0x0000
#define BD_MODEEDD1 0x0001
#define BD_MODEEDD3 0x0002
-#define BD_MODEMASK 0x0003
+#define BD_MODEMASK 0x0003
#define BD_FLOPPY 0x0004
#define BD_LABELOK 0x0008
#define BD_PARTTABOK 0x0010
@@ -158,22 +159,23 @@ bd_unit2bios(int unit)
/*
* Quiz the BIOS for disk devices, save a little info about them.
- *
- * XXX should we be consulting the BIOS equipment list, specifically
- * the value at 0x475?
*/
static int
bd_init(void)
{
- int base, unit;
+ int base, unit, nfd = 0;
/* sequence 0, 0x80 */
for (base = 0; base <= 0x80; base += 0x80) {
for (unit = base; (nbdinfo < MAXBDDEV); unit++) {
+ /* check the BIOS equipment list for number of fixed disks */
+ if((base == 0x80) &&
+ (nfd >= *(unsigned short *)PTOV(BIOS_NUMDRIVES)))
+ break;
+
bdinfo[nbdinfo].bd_unit = unit;
bdinfo[nbdinfo].bd_flags = (unit < 0x80) ? BD_FLOPPY : 0;
- /* XXX add EDD probes */
if (!bd_int13probe(&bdinfo[nbdinfo]))
break;
@@ -181,6 +183,8 @@ bd_init(void)
printf("BIOS drive %c: is disk%d\n",
(unit < 0x80) ? ('A' + unit) : ('C' + unit - 0x80), nbdinfo);
nbdinfo++;
+ if (base == 0x80)
+ nfd++;
}
}
return(0);
@@ -189,11 +193,9 @@ bd_init(void)
/*
* Try to detect a device supported by the legacy int13 BIOS
*/
-
static int
bd_int13probe(struct bdinfo *bd)
{
-
v86.ctl = V86_FLAGS;
v86.addr = 0x13;
v86.eax = 0x800;
@@ -204,6 +206,19 @@ bd_int13probe(struct bdinfo *bd)
((v86.edx & 0xff) > (bd->bd_unit & 0x7f))) { /* unit # OK */
bd->bd_flags |= BD_MODEINT13;
bd->bd_type = v86.ebx & 0xff;
+
+ /* Determine if we can use EDD with this device. */
+ v86.eax = 0x4100;
+ v86.edx = bd->bd_unit;
+ v86.ebx = 0x55aa;
+ v86int();
+ if (!(v86.efl & 0x1) && /* carry clear */
+ ((v86.ebx & 0xffff) == 0xaa55) && /* signature */
+ (v86.ecx & 0x1)) { /* packets mode ok */
+ bd->bd_flags |= BD_MODEEDD1;
+ if(v86.eax & 0xff00 > 0x300)
+ bd->bd_flags |= BD_MODEEDD3;
+ }
return(1);
}
return(0);
@@ -285,19 +300,28 @@ bd_printslice(struct open_disk *od, struct dos_partition *dp, char *prefix)
case DOSPTYP_EXT:
return;
case 0x01:
- sprintf(line, "%s: FAT-12\n", prefix);
+ sprintf(line, "%s: FAT-12 %.6dMB (%d - %d)\n", prefix,
+ dp->dp_size / 2048, /* 512-byte sector assumption */
+ dp->dp_start, dp->dp_start + dp->dp_size);
break;
case 0x04:
case 0x06:
case 0x0e:
- sprintf(line, "%s: FAT-16\n", prefix);
+ sprintf(line, "%s: FAT-16 %.6dMB (%d - %d)\n", prefix,
+ dp->dp_size / 2048, /* 512-byte sector assumption */
+ dp->dp_start, dp->dp_start + dp->dp_size);
break;
case 0x0b:
case 0x0c:
- sprintf(line, "%s: FAT-32\n", prefix);
+ sprintf(line, "%s: FAT-32 %.6dMB (%d - %d)\n", prefix,
+ dp->dp_size / 2048, /* 512-byte sector assumption */
+ dp->dp_start, dp->dp_start + dp->dp_size);
break;
default:
- sprintf(line, "%s: Unknown fs: 0x%x\n", prefix, dp->dp_typ);
+ sprintf(line, "%s: Unknown fs: 0x%x %.6dMB (%d - %d)\n",
+ prefix, dp->dp_typ,
+ dp->dp_size / 2048, /* 512-byte sector assumption */
+ dp->dp_start, dp->dp_start + dp->dp_size);
}
pager_output(line);
}
@@ -315,18 +339,21 @@ bd_printbsdslice(struct open_disk *od, int offset, char *prefix)
return;
lp =(struct disklabel *)(&buf[0]);
if (lp->d_magic != DISKMAGIC) {
- sprintf(line, "bad disklabel\n");
+ sprintf(line, "%s: FFS bad disklabel\n", prefix);
pager_output(line);
return;
}
/* Print partitions */
for (i = 0; i < lp->d_npartitions; i++) {
- if ((lp->d_partitions[i].p_fstype == FS_BSDFFS) || (lp->d_partitions[i].p_fstype == FS_SWAP) ||
+ if ((lp->d_partitions[i].p_fstype == FS_BSDFFS) ||
+ (lp->d_partitions[i].p_fstype == FS_SWAP) ||
+ (lp->d_partitions[i].p_fstype == FS_VINUM) ||
((lp->d_partitions[i].p_fstype == FS_UNUSED) &&
(od->od_flags & BD_FLOPPY) && (i == 0))) { /* Floppies often have bogus fstype, print 'a' */
sprintf(line, " %s%c: %s %.6dMB (%d - %d)\n", prefix, 'a' + i,
- (lp->d_partitions[i].p_fstype == FS_SWAP) ? "swap" : "FFS",
+ (lp->d_partitions[i].p_fstype == FS_SWAP) ? "swap" :
+ (lp->d_partitions[i].p_fstype == FS_VINUM) ? "vinum" : "FFS",
lp->d_partitions[i].p_size / 2048, /* 512-byte sector assumption */
lp->d_partitions[i].p_offset, lp->d_partitions[i].p_offset + lp->d_partitions[i].p_size);
pager_output(line);
@@ -799,18 +826,47 @@ bd_read(struct open_disk *od, daddr_t dblk, int blks, caddr_t dest)
v86int();
}
- /* build request XXX support EDD requests too */
- v86.ctl = V86_FLAGS;
- v86.addr = 0x13;
- v86.eax = 0x200 | x;
- v86.ecx = ((cyl & 0xff) << 8) | ((cyl & 0x300) >> 2) | sec;
- v86.edx = (hd << 8) | od->od_unit;
- v86.es = VTOPSEG(xp);
- v86.ebx = VTOPOFF(xp);
- v86int();
- result = (v86.efl & 0x1);
- if (result == 0)
- break;
+ if(cyl > 1023) {
+ /* use EDD if the disk supports it, otherwise, return error */
+ if(od->od_flags & BD_MODEEDD1) {
+ static unsigned short packet[8];
+
+ packet[0] = 0x10;
+ packet[1] = x;
+ packet[2] = VTOPOFF(xp);
+ packet[3] = VTOPSEG(xp);
+ packet[4] = dblk & 0xffff;
+ packet[5] = dblk >> 16;
+ packet[6] = 0;
+ packet[7] = 0;
+ v86.ctl = V86_FLAGS;
+ v86.addr = 0x13;
+ v86.eax = 0x4200;
+ v86.edx = od->od_unit;
+ v86.ds = VTOPSEG(packet);
+ v86.esi = VTOPOFF(packet);
+ v86int();
+ result = (v86.efl & 0x1);
+ if(result == 0)
+ break;
+ } else {
+ result = 1;
+ break;
+ }
+ } else {
+ /* Use normal CHS addressing */
+ v86.ctl = V86_FLAGS;
+ v86.addr = 0x13;
+ v86.eax = 0x200 | x;
+ v86.ecx = ((cyl & 0xff) << 8) | ((cyl & 0x300) >> 2) | sec;
+ v86.edx = (hd << 8) | od->od_unit;
+ v86.es = VTOPSEG(xp);
+ v86.ebx = VTOPOFF(xp);
+ v86int();
+ result = (v86.efl & 0x1);
+ if (result == 0)
+ break;
+ }
}
DEBUG("%d sectors from %d/%d/%d to %p (0x%x) %s", x, cyl, hd, sec - 1, p, VTOP(p), result ? "failed" : "ok");
OpenPOWER on IntegriCloud