summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--release/sysinstall/devices.c1
-rw-r--r--release/texts/alpha/HARDWARE.TXT13
-rw-r--r--release/texts/alpha/RELNOTES.TXT10
-rw-r--r--release/texts/i386/HARDWARE.TXT6
-rw-r--r--release/texts/i386/RELNOTES.TXT10
-rw-r--r--share/man/man4/Makefile2
-rw-r--r--share/man/man4/cue.485
-rw-r--r--sys/alpha/conf/GENERIC1
-rw-r--r--sys/alpha/conf/NOTES1
-rw-r--r--sys/amd64/conf/GENERIC1
-rw-r--r--sys/boot/forth/loader.conf1
-rw-r--r--sys/conf/NOTES8
-rw-r--r--sys/conf/files1
-rw-r--r--sys/dev/usb/if_cue.c1230
-rw-r--r--sys/dev/usb/if_cuereg.h181
-rw-r--r--sys/i386/conf/GENERIC1
-rw-r--r--sys/i386/conf/LINT8
-rw-r--r--sys/i386/conf/NEWCARD1
-rw-r--r--sys/i386/conf/NOTES8
-rw-r--r--sys/i386/conf/PCCARD1
-rw-r--r--sys/i386/i386/userconfig.c1
-rw-r--r--sys/modules/Makefile2
-rw-r--r--sys/modules/cue/Makefile10
-rw-r--r--usr.sbin/sade/devices.c1
-rw-r--r--usr.sbin/sysinstall/devices.c1
25 files changed, 1577 insertions, 8 deletions
diff --git a/release/sysinstall/devices.c b/release/sysinstall/devices.c
index a7591b9..32b8e7d 100644
--- a/release/sysinstall/devices.c
+++ b/release/sysinstall/devices.c
@@ -86,6 +86,7 @@ static struct _devname {
{ DEVICE_TYPE_FLOPPY, "fd%d", "floppy drive unit A", 2, 0, 64, 4, 'b' },
{ DEVICE_TYPE_FLOPPY, "worm%d", "SCSI optical disk / CDR", 23, 0, 1, 4, 'b' },
{ DEVICE_TYPE_NETWORK, "aue", "ADMtek USB ethernet adapter" },
+ { DEVICE_TYPE_NETWORK, "cue", "CATC USB ethernet adapter" },
{ DEVICE_TYPE_NETWORK, "fpa", "DEC DEFPA PCI FDDI card" },
{ DEVICE_TYPE_NETWORK, "sr", "SDL T1/E1 sync serial PCI card" },
{ DEVICE_TYPE_NETWORK, "cc3i", "SDL HSSI sync serial PCI card" },
diff --git a/release/texts/alpha/HARDWARE.TXT b/release/texts/alpha/HARDWARE.TXT
index 1786f81..18d2c7a 100644
--- a/release/texts/alpha/HARDWARE.TXT
+++ b/release/texts/alpha/HARDWARE.TXT
@@ -370,6 +370,13 @@ ADMtek Inc. AN986-based USB ethernet NICs including the following:
LinkSys USB100TX
Billionton USB100
Melco Inc. LU-ATX
+ D-Link DSB-650TX
+ SMC 2202USB
+
+CATC USB-EL1202A-based USB ethernet NICs including the following:
+ CATC Netmate
+ CATC Netmate II
+ Belkin F5U111
Kawasaki LSI KU5KUSB101B-based USB ethernet NICs including
the following:
@@ -378,6 +385,12 @@ the following:
Peracom USB Ethernet Adapter
3Com 3c19250
ADS Technologies USB-10BT
+ ATen UC10T
+ Netgear EA101
+ D-Link DSB-650
+ SMC 2102USB
+ SMC 2104USB
+ Corega USB-T
ASIX Electronics AX88140A PCI NICs, including the following:
Alfa Inc. GFC2204
diff --git a/release/texts/alpha/RELNOTES.TXT b/release/texts/alpha/RELNOTES.TXT
index 28365dc..e59354e 100644
--- a/release/texts/alpha/RELNOTES.TXT
+++ b/release/texts/alpha/RELNOTES.TXT
@@ -145,6 +145,10 @@ Netgear EA101, the D-Link DSB-650, and the SMC 2102USB and 2104USB.
IPfilter version 3.3.6 has been integrated.
+Driver support has been added for USB ethernet adapters based on
+the CATC USB-EL1201A chip, including the CATC Netmate and Netmate II,
+and the Belkin F5U111.
+
1.2. SECURITY FIXES
-------------------
@@ -373,6 +377,11 @@ ADMtek Inc. AN986-based USB ethernet NICs including the following:
D-Link DSB-650TX
SMC 2202USB
+CATC USB-EL1202A-based USB ethernet NICs including the following:
+ CATC Netmate
+ CATC Netmate II
+ Belkin F5U111
+
Kawasaki LSI KU5KUSB101B-based USB ethernet NICs including
the following:
LinkSys USB10T
@@ -385,6 +394,7 @@ the following:
D-Link DSB-650
SMC 2102USB
SMC 2104USB
+ Corega USB-T
ASIX Electronics AX88140A PCI NICs, including the following:
Alfa Inc. GFC2204
diff --git a/release/texts/i386/HARDWARE.TXT b/release/texts/i386/HARDWARE.TXT
index ec2318b..aaf8008 100644
--- a/release/texts/i386/HARDWARE.TXT
+++ b/release/texts/i386/HARDWARE.TXT
@@ -498,6 +498,11 @@ ADMtek Inc. AN986-based USB ethernet NICs including the following:
D-Link DSB-650TX
SMC 2202USB
+CATC USB-EL1202A-based USB ethernet NICs including the following:
+ CATC Netmate
+ CATC Netmate II
+ Belkin F5U111
+
Kawasaki LSI KU5KUSB101B-based USB ethernet NICs including
the following:
LinkSys USB10T
@@ -510,6 +515,7 @@ the following:
D-Link DSB-650
SMC 2102USB
SMC 2104USB
+ Corega USB-T
ASIX Electronics AX88140A PCI NICs, including the following:
Alfa Inc. GFC2204
diff --git a/release/texts/i386/RELNOTES.TXT b/release/texts/i386/RELNOTES.TXT
index c17c73f..1e1d522 100644
--- a/release/texts/i386/RELNOTES.TXT
+++ b/release/texts/i386/RELNOTES.TXT
@@ -147,6 +147,10 @@ Netgear EA101, the D-Link DSB-650, and the SMC 2102USB and 2104USB.
IPfilter version 3.3.6 has been integrated.
+Driver support has been added for USB ethernet adapters based on
+the CATC USB-EL1201A chip, including the CATC Netmate and Netmate II,
+and the Belkin F5U111.
+
1.2. SECURITY FIXES
-------------------
@@ -379,6 +383,11 @@ ADMtek Inc. AN986-based USB ethernet NICs including the following:
D-Link DSB-650TX
SMC 2202USB
+CATC USB-EL1202A-based USB ethernet NICs including the following:
+ CATC Netmate
+ CATC Netmate II
+ Belkin F5U111
+
Kawasaki LSI KU5KUSB101B-based USB ethernet NICs including
the following:
LinkSys USB10T
@@ -391,6 +400,7 @@ the following:
D-Link DSB-650
SMC 2102USB
SMC 2104USB
+ Corega USB-T
ASIX Electronics AX88140A PCI NICs, including the following:
Alfa Inc. GFC2204
diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile
index b1eb513..55c0346 100644
--- a/share/man/man4/Makefile
+++ b/share/man/man4/Makefile
@@ -2,7 +2,7 @@
# $FreeBSD$
MAN4= ahc.4 alpm.4 amd.4 atkbd.4 atkbdc.4 aue.4 blackhole.4 bpf.4 \
- bridge.4 ccd.4 cd.4 ch.4 da.4 dc.4 ddb.4 de.4 \
+ bridge.4 ccd.4 cd.4 ch.4 cue.4 da.4 dc.4 ddb.4 de.4 \
divert.4 drum.4 dummynet.4 faith.4 fd.4 fdc.4 fpa.4 fxp.4 \
gif.4 \
icmp.4 ifmib.4 iic.4 iicbb.4 iicbus.4 iicsmb.4 \
diff --git a/share/man/man4/cue.4 b/share/man/man4/cue.4
new file mode 100644
index 0000000..41e2b18
--- /dev/null
+++ b/share/man/man4/cue.4
@@ -0,0 +1,85 @@
+.\" Copyright (c) 1997, 1998, 1999, 2000
+.\" Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\" must display the following acknowledgement:
+.\" This product includes software developed by Bill Paul.
+.\" 4. Neither the name of the author nor the names of any co-contributors
+.\" may be used to endorse or promote products derived from this software
+.\" without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+.\" THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" $FreeBSD$
+.\"
+.Dd January 13, 2000
+.Dt CUE 4 i386
+.Os FreeBSD
+.Sh NAME
+.Nm cue
+.Nd
+CATC USB-EL1201A USB Ethernet driver
+.Sh SYNOPSIS
+.Cd "controller uhci0"
+.Cd "controller ohci0"
+.Cd "controller usb0"
+.Cd "device cue0"
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for USB ethernet adapters based on the Computer
+Access Technology Corporation's USB-EL1202A chipset, including the
+CATC Netmate and Netmate II, and the Belkin F5U111.
+.Pp
+The USB-EL1202A supports a 512-bit multicast hash filter, single perfect
+filter entry for the station address and promiscuous mode. Packets are
+received and transmitted over separate USB bulk transfer endpoints.
+.Pp
+The CATC adapter supports only 10mbps half-duplex mode, hence there
+are no
+.Xr ifmedia 4
+modes to select.
+.Pp
+For more information on configuring this device, see
+.Xr ifconfig 8 .
+.Sh DIAGNOSTICS
+.Bl -diag
+.It "cue%d: watchdog timeout"
+A packet was queued for transmission and a transmit command was
+issued, however the device failed to acknowledge the transmission
+before a timeout expired.
+.It "cue%d: no memory for rx list"
+The driver failed to allocate an mbuf for the receiver ring.
+.El
+.Sh SEE ALSO
+.Xr arp 4 ,
+.Xr netintro 4 ,
+.Xr ifconfig 8
+.Sh HISTORY
+The
+.Nm
+device driver first appeared in
+.Fx 4.0 .
+.Sh AUTHORS
+The
+.Nm
+driver was written by
+.An Bill Paul Aq wpaul@ee.columbia.edu .
diff --git a/sys/alpha/conf/GENERIC b/sys/alpha/conf/GENERIC
index 2354b25..e989ecf 100644
--- a/sys/alpha/conf/GENERIC
+++ b/sys/alpha/conf/GENERIC
@@ -156,4 +156,5 @@ pseudo-device bpf #Berkeley packet filter
#device ums0 # Mouse
# USB Ethernet
#device aue0 # ADMtek USB ethernet
+#device cue0 # CATC USB ethernet
#device kue0 # Kawasaki LSI USB ethernet
diff --git a/sys/alpha/conf/NOTES b/sys/alpha/conf/NOTES
index 2354b25..e989ecf 100644
--- a/sys/alpha/conf/NOTES
+++ b/sys/alpha/conf/NOTES
@@ -156,4 +156,5 @@ pseudo-device bpf #Berkeley packet filter
#device ums0 # Mouse
# USB Ethernet
#device aue0 # ADMtek USB ethernet
+#device cue0 # CATC USB ethernet
#device kue0 # Kawasaki LSI USB ethernet
diff --git a/sys/amd64/conf/GENERIC b/sys/amd64/conf/GENERIC
index ee6713e..b66d11e 100644
--- a/sys/amd64/conf/GENERIC
+++ b/sys/amd64/conf/GENERIC
@@ -215,4 +215,5 @@ pseudo-device bpf #Berkeley packet filter
#device ums0 # Mouse
# USB Ethernet
#device aue0 # ADMtek USB ethernet
+#device cue0 # CATC USB ethernet
#device kue0 # Kawasaki LSI USB ethernet
diff --git a/sys/boot/forth/loader.conf b/sys/boot/forth/loader.conf
index ef31231..085a7b1 100644
--- a/sys/boot/forth/loader.conf
+++ b/sys/boot/forth/loader.conf
@@ -167,6 +167,7 @@ ulpt_load="NO" # Printer
ums_load="NO" # Mouse
umass_load="NO" # Mass Storage Devices
if_aue_load="NO" # ADMtek USB ethernet
+if_cue_load="NO" # CATC USB ethernet
if_kue_load="NO" # Kawasaki LSI USB ethernet
##############################################################
diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index 3a284bd..1c50f92 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -2370,11 +2370,15 @@ device ums0
# eval board.
device aue0
#
+# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
+# and Netmate II, and the Belkin F5U111.
+device cue0
+#
# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
-# the Netgear EA101, the D-Link DSB-650, and the SMC 2102USB
-# and 2104USB.
+# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
+# and 2104USB, and the Corega USB-T.
device kue0
# debugging options for the USB subsystem
diff --git a/sys/conf/files b/sys/conf/files
index 69bfdbd..44e920c 100644
--- a/sys/conf/files
+++ b/sys/conf/files
@@ -909,6 +909,7 @@ dev/usb/ukbd.c optional ukbd
dev/usb/umass.c optional umass
dev/usb/uhub.c optional usb
dev/usb/if_aue.c optional aue
+dev/usb/if_cue.c optional cue
dev/usb/if_kue.c optional kue
isa_if.o optional isa \
dependency "isa_if.c isa_if.h" \
diff --git a/sys/dev/usb/if_cue.c b/sys/dev/usb/if_cue.c
new file mode 100644
index 0000000..37aaf8a
--- /dev/null
+++ b/sys/dev/usb/if_cue.c
@@ -0,0 +1,1230 @@
+/*
+ * Copyright (c) 1997, 1998, 1999, 2000
+ * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Bill Paul.
+ * 4. Neither the name of the author nor the names of any co-contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/*
+ * CATC USB-EL1201A USB to ethernet driver. Used in the CATC Netmate
+ * adapters and others.
+ *
+ * Written by Bill Paul <wpaul@ee.columbia.edu>
+ * Electrical Engineering Department
+ * Columbia University, New York City
+ */
+
+/*
+ * The CATC USB-EL1201A provides USB ethernet support at 10Mbps. The
+ * RX filter uses a 512-bit multicast hash table, single perfect entry
+ * for the station address, and promiscuous mode. Unlike the ADMtek
+ * and KLSI chips, the CATC ASIC supports read and write combining
+ * mode where multiple packets can be transfered using a single bulk
+ * transaction, which helps performance a great deal.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/sockio.h>
+#include <sys/mbuf.h>
+#include <sys/malloc.h>
+#include <sys/kernel.h>
+#include <sys/socket.h>
+
+#include <net/if.h>
+#include <net/if_arp.h>
+#include <net/ethernet.h>
+#include <net/if_dl.h>
+
+#include <net/bpf.h>
+
+#include <machine/clock.h> /* for DELAY */
+#include <sys/bus.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbdi.h>
+#include <dev/usb/usbdi_util.h>
+#include <dev/usb/usbdivar.h>
+#include <dev/usb/usbdevs.h>
+#include <dev/usb/usb_quirks.h>
+#include <dev/usb/usb_ethersubr.h>
+
+#include <dev/usb/if_cuereg.h>
+
+#ifndef lint
+static const char rcsid[] =
+ "$FreeBSD$";
+#endif
+
+/*
+ * Various supported device vendors/types and their names.
+ */
+static struct cue_type cue_devs[] = {
+ { USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE,
+ "CATC Netmate USB Ethernet" },
+ { USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE2,
+ "CATC Netmate USB Ethernet" },
+ { 0, 0, NULL }
+};
+
+static struct usb_qdat cue_qdat;
+
+static int cue_match __P((device_t));
+static int cue_attach __P((device_t));
+static int cue_detach __P((device_t));
+
+static int cue_tx_list_init __P((struct cue_softc *));
+static int cue_rx_list_init __P((struct cue_softc *));
+static int cue_newbuf __P((struct cue_softc *, struct cue_chain *,
+ struct mbuf *));
+static int cue_encap __P((struct cue_softc *, struct mbuf *, int));
+static void cue_rxeof __P((usbd_xfer_handle,
+ usbd_private_handle, usbd_status));
+static void cue_txeof __P((usbd_xfer_handle,
+ usbd_private_handle, usbd_status));
+static void cue_tick __P((void *));
+static void cue_rxstart __P((struct ifnet *));
+static void cue_start __P((struct ifnet *));
+static int cue_ioctl __P((struct ifnet *, u_long, caddr_t));
+static void cue_init __P((void *));
+static void cue_stop __P((struct cue_softc *));
+static void cue_watchdog __P((struct ifnet *));
+static void cue_shutdown __P((device_t));
+
+static void cue_setmulti __P((struct cue_softc *));
+static u_int32_t cue_crc __P((caddr_t));
+static void cue_reset __P((struct cue_softc *));
+
+static int csr_read_1 __P((struct cue_softc *, int));
+static int csr_write_1 __P((struct cue_softc *, int, int));
+static int csr_read_2 __P((struct cue_softc *, int));
+#ifdef notdef
+static int csr_write_2 __P((struct cue_softc *, int, int));
+#endif
+static int cue_mem __P((struct cue_softc *, int,
+ int, void *, int));
+static int cue_getmac __P((struct cue_softc *, void *));
+
+static device_method_t cue_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, cue_match),
+ DEVMETHOD(device_attach, cue_attach),
+ DEVMETHOD(device_detach, cue_detach),
+ DEVMETHOD(device_shutdown, cue_shutdown),
+
+ { 0, 0 }
+};
+
+static driver_t cue_driver = {
+ "cue",
+ cue_methods,
+ sizeof(struct cue_softc)
+};
+
+static devclass_t cue_devclass;
+
+DRIVER_MODULE(if_cue, uhub, cue_driver, cue_devclass, usbd_driver_load, 0);
+
+#define CUE_SETBIT(sc, reg, x) \
+ csr_write_1(sc, reg, csr_read_1(sc, reg) | (x))
+
+#define CUE_CLRBIT(sc, reg, x) \
+ csr_write_1(sc, reg, csr_read_1(sc, reg) & ~(x))
+
+static int csr_read_1(sc, reg)
+ struct cue_softc *sc;
+ int reg;
+{
+ usb_device_request_t req;
+ usbd_status err;
+ u_int8_t val = 0;
+ int s;
+
+ s = splusb();
+
+ req.bmRequestType = UT_READ_VENDOR_DEVICE;
+ req.bRequest = CUE_CMD_READREG;
+ USETW(req.wValue, 0);
+ USETW(req.wIndex, reg);
+ USETW(req.wLength, 1);
+
+ err = usbd_do_request(sc->cue_udev, &req, &val);
+
+ splx(s);
+
+ if (err)
+ return(0);
+
+ return(val);
+}
+
+static int csr_read_2(sc, reg)
+ struct cue_softc *sc;
+ int reg;
+{
+ usb_device_request_t req;
+ usbd_status err;
+ u_int16_t val = 0;
+ int s;
+
+ s = splusb();
+
+ req.bmRequestType = UT_READ_VENDOR_DEVICE;
+ req.bRequest = CUE_CMD_READREG;
+ USETW(req.wValue, 0);
+ USETW(req.wIndex, reg);
+ USETW(req.wLength, 2);
+
+ err = usbd_do_request(sc->cue_udev, &req, &val);
+
+ splx(s);
+
+ if (err)
+ return(0);
+
+ return(val);
+}
+
+static int csr_write_1(sc, reg, val)
+ struct cue_softc *sc;
+ int reg, val;
+{
+ usb_device_request_t req;
+ usbd_status err;
+ int s;
+
+ s = splusb();
+
+ req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
+ req.bRequest = CUE_CMD_WRITEREG;
+ USETW(req.wValue, val);
+ USETW(req.wIndex, reg);
+ USETW(req.wLength, 0);
+
+ err = usbd_do_request(sc->cue_udev, &req, NULL);
+
+ splx(s);
+
+ if (err)
+ return(-1);
+
+ return(0);
+}
+
+#ifdef notdef
+static int csr_write_2(sc, reg, val)
+ struct cue_softc *sc;
+ int reg, val;
+{
+ usb_device_request_t req;
+ usbd_status err;
+ int s;
+
+ s = splusb();
+
+ req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
+ req.bRequest = CUE_CMD_WRITEREG;
+ USETW(req.wValue, val);
+ USETW(req.wIndex, reg);
+ USETW(req.wLength, 0);
+
+ err = usbd_do_request(sc->cue_udev, &req, NULL);
+
+ splx(s);
+
+ if (err)
+ return(-1);
+
+ return(0);
+}
+#endif
+
+static int cue_mem(sc, cmd, addr, buf, len)
+ struct cue_softc *sc;
+ int cmd;
+ int addr;
+ void *buf;
+ int len;
+{
+ usb_device_request_t req;
+ usbd_status err;
+ int s;
+
+ s = splusb();
+
+ if (cmd == CUE_CMD_READSRAM)
+ req.bmRequestType = UT_READ_VENDOR_DEVICE;
+ else
+ req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
+ req.bRequest = cmd;
+ USETW(req.wValue, 0);
+ USETW(req.wIndex, addr);
+ USETW(req.wLength, len);
+
+ err = usbd_do_request(sc->cue_udev, &req, buf);
+
+ splx(s);
+
+ if (err)
+ return(-1);
+
+ return(0);
+}
+
+static int cue_getmac(sc, buf)
+ struct cue_softc *sc;
+ void *buf;
+{
+ usb_device_request_t req;
+ usbd_status err;
+ int s;
+
+ s = splusb();
+
+ req.bmRequestType = UT_READ_VENDOR_DEVICE;
+ req.bRequest = CUE_CMD_GET_MACADDR;
+ USETW(req.wValue, 0);
+ USETW(req.wIndex, 0);
+ USETW(req.wLength, ETHER_ADDR_LEN);
+
+ err = usbd_do_request(sc->cue_udev, &req, buf);
+
+ splx(s);
+
+ if (err) {
+ printf("cue%d: read MAC address failed\n", sc->cue_unit);
+ return(-1);
+ }
+
+ return(0);
+}
+
+#define CUE_POLY 0xEDB88320
+#define CUE_BITS 9
+
+static u_int32_t cue_crc(addr)
+ caddr_t addr;
+{
+ u_int32_t idx, bit, data, crc;
+
+ /* Compute CRC for the address value. */
+ crc = 0xFFFFFFFF; /* initial value */
+
+ for (idx = 0; idx < 6; idx++) {
+ for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
+ crc = (crc >> 1) ^ (((crc ^ data) & 1) ? CUE_POLY : 0);
+ }
+
+ return (crc & ((1 << CUE_BITS) - 1));
+}
+
+static void cue_setmulti(sc)
+ struct cue_softc *sc;
+{
+ struct ifnet *ifp;
+ struct ifmultiaddr *ifma;
+ u_int32_t h = 0, i;
+
+ ifp = &sc->arpcom.ac_if;
+
+ if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
+ for (i = 0; i < CUE_MCAST_TABLE_LEN; i++)
+ sc->cue_mctab[i] = 0xFF;
+ cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
+ &sc->cue_mctab, CUE_MCAST_TABLE_LEN);
+ return;
+ }
+
+ /* first, zot all the existing hash bits */
+ for (i = 0; i < CUE_MCAST_TABLE_LEN; i++)
+ sc->cue_mctab[i] = 0;
+
+ /* now program new ones */
+ for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
+ ifma = ifma->ifma_link.le_next) {
+ if (ifma->ifma_addr->sa_family != AF_LINK)
+ continue;
+ h = cue_crc(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
+ sc->cue_mctab[h >> 3] |= 1 << (h & 0xF);
+ }
+
+ /*
+ * Also include the broadcast address in the filter
+ * so we can receive broadcast frames.
+ */
+ h = cue_crc(etherbroadcastaddr);
+ sc->cue_mctab[h >> 4] |= 1 << (h & 0xF);
+
+ cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
+ &sc->cue_mctab, CUE_MCAST_TABLE_LEN);
+
+ return;
+}
+
+static void cue_reset(sc)
+ struct cue_softc *sc;
+{
+ usb_device_request_t req;
+ usbd_status err;
+ int s;
+
+ s = splusb();
+
+ req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
+ req.bRequest = CUE_CMD_RESET;
+ USETW(req.wValue, 0);
+ USETW(req.wIndex, 0);
+ USETW(req.wLength, 0);
+ err = usbd_do_request(sc->cue_udev, &req, NULL);
+
+ splx(s);
+
+ if (err)
+ printf("cue%d: reset failed\n", sc->cue_unit);
+
+ /* Wait a little while for the chip to get its brains in order. */
+ DELAY(1000);
+ return;
+}
+
+/*
+ * Probe for a Pegasus chip.
+ */
+USB_MATCH(cue)
+{
+ USB_MATCH_START(cue, uaa);
+ struct cue_type *t;
+ usb_device_descriptor_t *dd;
+
+ if (!uaa->iface)
+ return(UMATCH_NONE);
+
+ dd = &uaa->device->ddesc;
+
+ t = cue_devs;
+ while(t->cue_name != NULL) {
+ if (uaa->vendor == t->cue_vid &&
+ uaa->product == t->cue_did) {
+ USETW(dd->bcdDevice, 0x220);
+ uaa->device->quirks = usbd_find_quirk(dd);
+ device_set_desc(self, t->cue_name);
+ return(UMATCH_VENDOR_PRODUCT);
+ }
+ t++;
+ }
+
+ return(UMATCH_NONE);
+}
+
+/*
+ * Attach the interface. Allocate softc structures, do ifmedia
+ * setup and ethernet/BPF attach.
+ */
+USB_ATTACH(cue)
+{
+ USB_ATTACH_START(cue, sc, uaa);
+ char devinfo[1024];
+ int s;
+ u_char eaddr[ETHER_ADDR_LEN];
+ struct ifnet *ifp;
+ usb_interface_descriptor_t *id;
+ usb_endpoint_descriptor_t *ed;
+ int i;
+
+ s = splimp();
+
+ bzero(sc, sizeof(struct cue_softc));
+ sc->cue_iface = uaa->iface;
+ sc->cue_udev = uaa->device;
+ sc->cue_unit = device_get_unit(self);
+
+ id = usbd_get_interface_descriptor(uaa->iface);
+
+ usbd_devinfo(uaa->device, 0, devinfo);
+ device_set_desc_copy(self, devinfo);
+ printf("%s: %s\n", USBDEVNAME(self), devinfo);
+
+ /* Find endpoints. */
+ for (i = 0; i < id->bNumEndpoints; i++) {
+ ed = usbd_interface2endpoint_descriptor(uaa->iface, i);
+ if (!ed) {
+ printf("cue%d: couldn't get ep %d\n",
+ sc->cue_unit, i);
+ splx(s);
+ USB_ATTACH_ERROR_RETURN;
+ }
+ if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
+ (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
+ sc->cue_ed[CUE_ENDPT_RX] = ed->bEndpointAddress;
+ } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
+ (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
+ sc->cue_ed[CUE_ENDPT_TX] = ed->bEndpointAddress;
+ } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
+ (ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
+ sc->cue_ed[CUE_ENDPT_INTR] = ed->bEndpointAddress;
+ }
+ }
+#ifdef foo
+ /* Reset the adapter. */
+ cue_reset(sc);
+ printf("reset...\n");
+#endif
+ /*
+ * Get station address.
+ */
+ cue_getmac(sc, &eaddr);
+
+ /*
+ * A CATC chip was detected. Inform the world.
+ */
+ printf("cue%d: Ethernet address: %6D\n", sc->cue_unit, eaddr, ":");
+
+ bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
+
+ ifp = &sc->arpcom.ac_if;
+ ifp->if_softc = sc;
+ ifp->if_unit = sc->cue_unit;
+ ifp->if_name = "cue";
+ ifp->if_mtu = ETHERMTU;
+ ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
+ ifp->if_ioctl = cue_ioctl;
+ ifp->if_output = ether_output;
+ ifp->if_start = cue_start;
+ ifp->if_watchdog = cue_watchdog;
+ ifp->if_init = cue_init;
+ ifp->if_baudrate = 10000000;
+ ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
+
+ cue_qdat.ifp = ifp;
+ cue_qdat.if_rxstart = cue_rxstart;
+
+ /*
+ * Call MI attach routines.
+ */
+ if_attach(ifp);
+ ether_ifattach(ifp);
+ callout_handle_init(&sc->cue_stat_ch);
+ bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
+ usb_register_netisr();
+
+ splx(s);
+ USB_ATTACH_SUCCESS_RETURN;
+}
+
+static int cue_detach(dev)
+ device_t dev;
+{
+ struct cue_softc *sc;
+ struct ifnet *ifp;
+ int s;
+
+ s = splusb();
+
+ sc = device_get_softc(dev);
+ ifp = &sc->arpcom.ac_if;
+
+ untimeout(cue_tick, sc, sc->cue_stat_ch);
+ if_detach(ifp);
+
+ if (sc->cue_ep[CUE_ENDPT_TX] != NULL)
+ usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_TX]);
+ if (sc->cue_ep[CUE_ENDPT_RX] != NULL)
+ usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_RX]);
+ if (sc->cue_ep[CUE_ENDPT_INTR] != NULL)
+ usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_INTR]);
+
+ splx(s);
+
+ return(0);
+}
+
+/*
+ * Initialize an RX descriptor and attach an MBUF cluster.
+ */
+static int cue_newbuf(sc, c, m)
+ struct cue_softc *sc;
+ struct cue_chain *c;
+ struct mbuf *m;
+{
+ struct mbuf *m_new = NULL;
+
+ if (m == NULL) {
+ MGETHDR(m_new, M_DONTWAIT, MT_DATA);
+ if (m_new == NULL) {
+ printf("cue%d: no memory for rx list "
+ "-- packet dropped!\n", sc->cue_unit);
+ return(ENOBUFS);
+ }
+
+ MCLGET(m_new, M_DONTWAIT);
+ if (!(m_new->m_flags & M_EXT)) {
+ printf("cue%d: no memory for rx list "
+ "-- packet dropped!\n", sc->cue_unit);
+ m_freem(m_new);
+ return(ENOBUFS);
+ }
+ m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
+ } else {
+ m_new = m;
+ m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
+ m_new->m_data = m_new->m_ext.ext_buf;
+ }
+
+ m_adj(m_new, ETHER_ALIGN);
+ c->cue_mbuf = m_new;
+
+ return(0);
+}
+
+static int cue_rx_list_init(sc)
+ struct cue_softc *sc;
+{
+ struct cue_cdata *cd;
+ struct cue_chain *c;
+ int i;
+
+ cd = &sc->cue_cdata;
+ for (i = 0; i < CUE_RX_LIST_CNT; i++) {
+ c = &cd->cue_rx_chain[i];
+ c->cue_sc = sc;
+ c->cue_idx = i;
+ c->cue_accum = 0;
+ if (cue_newbuf(sc, c, NULL) == ENOBUFS)
+ return(ENOBUFS);
+ if (c->cue_xfer == NULL) {
+ c->cue_xfer = usbd_alloc_xfer(sc->cue_udev);
+ if (c->cue_xfer == NULL)
+ return(ENOBUFS);
+ }
+ }
+
+ return(0);
+}
+
+static int cue_tx_list_init(sc)
+ struct cue_softc *sc;
+{
+ struct cue_cdata *cd;
+ struct cue_chain *c;
+ int i;
+
+ cd = &sc->cue_cdata;
+ for (i = 0; i < CUE_TX_LIST_CNT; i++) {
+ c = &cd->cue_tx_chain[i];
+ c->cue_sc = sc;
+ c->cue_idx = i;
+ c->cue_mbuf = NULL;
+ if (c->cue_xfer == NULL) {
+ c->cue_xfer = usbd_alloc_xfer(sc->cue_udev);
+ if (c->cue_xfer == NULL)
+ return(ENOBUFS);
+ }
+ c->cue_buf = malloc(CUE_BUFSZ, M_USBDEV, M_NOWAIT);
+ if (c->cue_buf == NULL)
+ return(ENOBUFS);
+ }
+
+ return(0);
+}
+
+static void cue_rxstart(ifp)
+ struct ifnet *ifp;
+{
+ struct cue_softc *sc;
+ struct cue_chain *c;
+
+ sc = ifp->if_softc;
+ c = &sc->cue_cdata.cue_rx_chain[sc->cue_cdata.cue_rx_prod];
+
+ if (cue_newbuf(sc, c, NULL) == ENOBUFS) {
+ ifp->if_ierrors++;
+ return;
+ }
+
+ /* Setup new transfer. */
+ usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_RX],
+ c, mtod(c->cue_mbuf, char *), CUE_CUTOFF, USBD_SHORT_XFER_OK,
+ USBD_NO_TIMEOUT, cue_rxeof);
+ usbd_transfer(c->cue_xfer);
+
+ return;
+}
+
+/*
+ * A frame has been uploaded: pass the resulting mbuf chain up to
+ * the higher level protocols.
+ */
+static void cue_rxeof(xfer, priv, status)
+ usbd_xfer_handle xfer;
+ usbd_private_handle priv;
+ usbd_status status;
+{
+ struct cue_softc *sc;
+ struct cue_chain *c;
+ struct mbuf *m;
+ struct ifnet *ifp;
+ int total_len = 0;
+ u_int16_t len;
+
+ c = priv;
+ sc = c->cue_sc;
+ ifp = &sc->arpcom.ac_if;
+
+ if (!(ifp->if_flags & IFF_RUNNING))
+ return;
+
+ if (status != USBD_NORMAL_COMPLETION) {
+ if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
+ return;
+ printf("cue%d: usb error on rx: %s\n", sc->cue_unit,
+ usbd_errstr(status));
+ if (status == USBD_STALLED)
+ usbd_clear_endpoint_stall(sc->cue_ep[CUE_ENDPT_RX]);
+ goto done;
+ }
+
+ usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
+
+ /*
+ * See if we've already accumulated some data from
+ * a previous transfer.
+ */
+ if (c->cue_accum) {
+ total_len += c->cue_accum;
+ c->cue_accum = 0;
+ }
+
+ m = c->cue_mbuf;
+ len = *mtod(m, u_int16_t *);
+
+ /*
+ * Check to see if this is just the first chunk of a
+ * split transfer. We really need a more reliable way
+ * to detect this.
+ */
+ if (len != total_len && total_len == CUE_CUTOFF) {
+ c->cue_accum = CUE_CUTOFF;
+ usbd_setup_xfer(xfer, sc->cue_ep[CUE_ENDPT_RX],
+ c, mtod(c->cue_mbuf, char *) + CUE_CUTOFF,
+ CUE_CUTOFF, USBD_SHORT_XFER_OK,
+ USBD_NO_TIMEOUT, cue_rxeof);
+ usbd_transfer(xfer);
+ return;
+ }
+
+ /* No errors; receive the packet. */
+ total_len = len;
+
+ if (len < sizeof(struct ether_header)) {
+ ifp->if_ierrors++;
+ goto done;
+ }
+
+ ifp->if_ipackets++;
+ m_adj(m, sizeof(u_int16_t));
+ m->m_pkthdr.rcvif = (struct ifnet *)&cue_qdat;
+ m->m_pkthdr.len = m->m_len = total_len;
+
+ /* Put the packet on the special USB input queue. */
+ usb_ether_input(m);
+
+ return;
+done:
+ /* Setup new transfer. */
+ usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_RX],
+ c, mtod(c->cue_mbuf, char *), CUE_CUTOFF, USBD_SHORT_XFER_OK,
+ USBD_NO_TIMEOUT, cue_rxeof);
+ usbd_transfer(c->cue_xfer);
+
+ return;
+}
+
+/*
+ * A frame was downloaded to the chip. It's safe for us to clean up
+ * the list buffers.
+ */
+
+static void cue_txeof(xfer, priv, status)
+ usbd_xfer_handle xfer;
+ usbd_private_handle priv;
+ usbd_status status;
+{
+ struct cue_softc *sc;
+ struct cue_chain *c;
+ struct ifnet *ifp;
+ usbd_status err;
+ int s;
+
+ s = splimp();
+
+ c = priv;
+ sc = c->cue_sc;
+ ifp = &sc->arpcom.ac_if;
+
+ if (status != USBD_NORMAL_COMPLETION) {
+ if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
+ splx(s);
+ return;
+ }
+ printf("cue%d: usb error on tx: %s\n", sc->cue_unit,
+ usbd_errstr(status));
+#ifdef foo
+ if (status == USBD_STALLED)
+ usbd_clear_endpoint_stall(sc->cue_ep[CUE_ENDPT_TX]);
+#endif
+ splx(s);
+ return;
+ }
+
+ ifp->if_timer = 0;
+ ifp->if_flags &= ~IFF_OACTIVE;
+ usbd_get_xfer_status(c->cue_xfer, NULL, NULL, NULL, &err);
+
+ c->cue_mbuf->m_pkthdr.rcvif = ifp;
+ usb_tx_done(c->cue_mbuf);
+ c->cue_mbuf = NULL;
+
+ if (err)
+ ifp->if_oerrors++;
+ else
+ ifp->if_opackets++;
+
+ splx(s);
+
+ return;
+}
+
+static void cue_tick(xsc)
+ void *xsc;
+{
+ struct cue_softc *sc;
+ struct ifnet *ifp;
+ int s;
+
+ s = splimp();
+
+ sc = xsc;
+
+ if (sc == NULL) {
+ splx(s);
+ return;
+ }
+
+ ifp = &sc->arpcom.ac_if;
+
+ ifp->if_collisions += csr_read_2(sc, CUE_TX_SINGLECOLL);
+ ifp->if_collisions += csr_read_2(sc, CUE_TX_MULTICOLL);
+ ifp->if_collisions += csr_read_2(sc, CUE_TX_EXCESSCOLL);
+
+ if (csr_read_2(sc, CUE_RX_FRAMEERR))
+ ifp->if_ierrors++;
+
+ sc->cue_stat_ch = timeout(cue_tick, sc, hz);
+
+ splx(s);
+
+ return;
+}
+
+static int cue_encap(sc, m, idx)
+ struct cue_softc *sc;
+ struct mbuf *m;
+ int idx;
+{
+ int total_len;
+ struct cue_chain *c;
+ usbd_status err;
+
+ c = &sc->cue_cdata.cue_tx_chain[idx];
+
+ /*
+ * Copy the mbuf data into a contiguous buffer, leaving two
+ * bytes at the beginning to hold the frame length.
+ */
+ m_copydata(m, 0, m->m_pkthdr.len, c->cue_buf + 2);
+ c->cue_mbuf = m;
+
+ total_len = m->m_pkthdr.len + 2;
+#ifdef foo
+ total_len += 64 - (total_len % 64);
+#endif
+ /* The first two bytes are the frame length */
+ c->cue_buf[0] = (u_int8_t)m->m_pkthdr.len;
+ c->cue_buf[1] = (u_int8_t)(m->m_pkthdr.len >> 8);
+
+ usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_TX],
+ c, c->cue_buf, total_len, 0, 10000, cue_txeof);
+
+ /* Transmit */
+ err = usbd_transfer(c->cue_xfer);
+ if (err != USBD_IN_PROGRESS) {
+ cue_stop(sc);
+ return(EIO);
+ }
+
+ sc->cue_cdata.cue_tx_cnt++;
+
+ return(0);
+}
+
+static void cue_start(ifp)
+ struct ifnet *ifp;
+{
+ struct cue_softc *sc;
+ struct mbuf *m_head = NULL;
+
+ sc = ifp->if_softc;
+
+ if (ifp->if_flags & IFF_OACTIVE)
+ return;
+
+ IF_DEQUEUE(&ifp->if_snd, m_head);
+ if (m_head == NULL)
+ return;
+
+ if (cue_encap(sc, m_head, 0)) {
+ IF_PREPEND(&ifp->if_snd, m_head);
+ ifp->if_flags |= IFF_OACTIVE;
+ return;
+ }
+
+ /*
+ * If there's a BPF listener, bounce a copy of this frame
+ * to him.
+ */
+ if (ifp->if_bpf)
+ bpf_mtap(ifp, m_head);
+
+ ifp->if_flags |= IFF_OACTIVE;
+
+ /*
+ * Set a timeout in case the chip goes out to lunch.
+ */
+ ifp->if_timer = 5;
+
+ return;
+}
+
+static void cue_init(xsc)
+ void *xsc;
+{
+ struct cue_softc *sc = xsc;
+ struct ifnet *ifp = &sc->arpcom.ac_if;
+ struct cue_chain *c;
+ usbd_status err;
+ int i, s;
+
+ if (ifp->if_flags & IFF_RUNNING)
+ return;
+
+ s = splimp();
+
+ /*
+ * Cancel pending I/O and free all RX/TX buffers.
+ */
+#ifdef foo
+ cue_reset(sc);
+#endif
+
+ /* Set MAC address */
+ for (i = 0; i < ETHER_ADDR_LEN; i++)
+ csr_write_1(sc, CUE_PAR0 - i, sc->arpcom.ac_enaddr[i]);
+
+ /* Enable RX logic. */
+ csr_write_1(sc, CUE_ETHCTL, CUE_ETHCTL_RX_ON|CUE_ETHCTL_MCAST_ON);
+
+ /* If we want promiscuous mode, set the allframes bit. */
+ if (ifp->if_flags & IFF_PROMISC) {
+ CUE_SETBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
+ } else {
+ CUE_CLRBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
+ }
+
+ /* Init TX ring. */
+ if (cue_tx_list_init(sc) == ENOBUFS) {
+ printf("cue%d: tx list init failed\n", sc->cue_unit);
+ splx(s);
+ return;
+ }
+
+ /* Init RX ring. */
+ if (cue_rx_list_init(sc) == ENOBUFS) {
+ printf("cue%d: rx list init failed\n", sc->cue_unit);
+ splx(s);
+ return;
+ }
+
+ /* Load the multicast filter. */
+ cue_setmulti(sc);
+
+ /*
+ * Set the number of RX and TX buffers that we want
+ * to reserve inside the ASIC.
+ */
+ csr_write_1(sc, CUE_RX_BUFPKTS, CUE_RX_FRAMES);
+ csr_write_1(sc, CUE_TX_BUFPKTS, CUE_TX_FRAMES);
+
+ /* Set advanced operation modes. */
+ csr_write_1(sc, CUE_ADVANCED_OPMODES,
+ CUE_AOP_EMBED_RXLEN|0x01); /* 1 wait state */
+
+ /* Program the LED operation. */
+ csr_write_1(sc, CUE_LEDCTL, CUE_LEDCTL_FOLLOW_LINK);
+
+ /* Open RX and TX pipes. */
+ err = usbd_open_pipe(sc->cue_iface, sc->cue_ed[CUE_ENDPT_RX],
+ USBD_EXCLUSIVE_USE, &sc->cue_ep[CUE_ENDPT_RX]);
+ if (err) {
+ printf("cue%d: open rx pipe failed: %s\n",
+ sc->cue_unit, usbd_errstr(err));
+ splx(s);
+ return;
+ }
+ err = usbd_open_pipe(sc->cue_iface, sc->cue_ed[CUE_ENDPT_TX],
+ USBD_EXCLUSIVE_USE, &sc->cue_ep[CUE_ENDPT_TX]);
+ if (err) {
+ printf("cue%d: open tx pipe failed: %s\n",
+ sc->cue_unit, usbd_errstr(err));
+ splx(s);
+ return;
+ }
+
+ /* Start up the receive pipe. */
+ for (i = 0; i < CUE_RX_LIST_CNT; i++) {
+ c = &sc->cue_cdata.cue_rx_chain[i];
+ usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_RX],
+ c, mtod(c->cue_mbuf, char *), CUE_CUTOFF,
+ USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, cue_rxeof);
+ usbd_transfer(c->cue_xfer);
+ }
+
+ ifp->if_flags |= IFF_RUNNING;
+ ifp->if_flags &= ~IFF_OACTIVE;
+
+ (void)splx(s);
+
+ sc->cue_stat_ch = timeout(cue_tick, sc, hz);
+
+ return;
+}
+
+static int cue_ioctl(ifp, command, data)
+ struct ifnet *ifp;
+ u_long command;
+ caddr_t data;
+{
+ struct cue_softc *sc = ifp->if_softc;
+ int s, error = 0;
+
+ s = splimp();
+
+ switch(command) {
+ case SIOCSIFADDR:
+ case SIOCGIFADDR:
+ case SIOCSIFMTU:
+ error = ether_ioctl(ifp, command, data);
+ break;
+ case SIOCSIFFLAGS:
+ if (ifp->if_flags & IFF_UP) {
+ if (ifp->if_flags & IFF_RUNNING &&
+ ifp->if_flags & IFF_PROMISC &&
+ !(sc->cue_if_flags & IFF_PROMISC)) {
+ CUE_SETBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
+ cue_setmulti(sc);
+ } else if (ifp->if_flags & IFF_RUNNING &&
+ !(ifp->if_flags & IFF_PROMISC) &&
+ sc->cue_if_flags & IFF_PROMISC) {
+ CUE_CLRBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
+ cue_setmulti(sc);
+ } else if (!(ifp->if_flags & IFF_RUNNING))
+ cue_init(sc);
+ } else {
+ if (ifp->if_flags & IFF_RUNNING)
+ cue_stop(sc);
+ }
+ sc->cue_if_flags = ifp->if_flags;
+ error = 0;
+ break;
+ case SIOCADDMULTI:
+ case SIOCDELMULTI:
+ cue_setmulti(sc);
+ error = 0;
+ break;
+ default:
+ error = EINVAL;
+ break;
+ }
+
+ (void)splx(s);
+
+ return(error);
+}
+
+static void cue_watchdog(ifp)
+ struct ifnet *ifp;
+{
+ struct cue_softc *sc;
+
+ sc = ifp->if_softc;
+
+ ifp->if_oerrors++;
+ printf("cue%d: watchdog timeout\n", sc->cue_unit);
+
+ /*
+ * The polling business is a kludge to avoid allowing the
+ * USB code to call tsleep() in usbd_delay_ms(), which will
+ * kill us since the watchdog routine is invoked from
+ * interrupt context.
+ */
+ sc->cue_udev->bus->use_polling++;
+ cue_stop(sc);
+ cue_init(sc);
+ sc->cue_udev->bus->use_polling--;
+
+ if (ifp->if_snd.ifq_head != NULL)
+ cue_start(ifp);
+
+ return;
+}
+
+/*
+ * Stop the adapter and free any mbufs allocated to the
+ * RX and TX lists.
+ */
+static void cue_stop(sc)
+ struct cue_softc *sc;
+{
+ usbd_status err;
+ struct ifnet *ifp;
+ int i;
+
+ ifp = &sc->arpcom.ac_if;
+ ifp->if_timer = 0;
+
+ csr_write_1(sc, CUE_ETHCTL, 0);
+ cue_reset(sc);
+ untimeout(cue_tick, sc, sc->cue_stat_ch);
+
+ /* Stop transfers. */
+ if (sc->cue_ep[CUE_ENDPT_RX] != NULL) {
+ err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_RX]);
+ if (err) {
+ printf("cue%d: abort rx pipe failed: %s\n",
+ sc->cue_unit, usbd_errstr(err));
+ }
+ err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_RX]);
+ if (err) {
+ printf("cue%d: close rx pipe failed: %s\n",
+ sc->cue_unit, usbd_errstr(err));
+ }
+ sc->cue_ep[CUE_ENDPT_RX] = NULL;
+ }
+
+ if (sc->cue_ep[CUE_ENDPT_TX] != NULL) {
+ err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_TX]);
+ if (err) {
+ printf("cue%d: abort tx pipe failed: %s\n",
+ sc->cue_unit, usbd_errstr(err));
+ }
+ err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_TX]);
+ if (err) {
+ printf("cue%d: close tx pipe failed: %s\n",
+ sc->cue_unit, usbd_errstr(err));
+ }
+ sc->cue_ep[CUE_ENDPT_TX] = NULL;
+ }
+
+ if (sc->cue_ep[CUE_ENDPT_INTR] != NULL) {
+ err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_INTR]);
+ if (err) {
+ printf("cue%d: abort intr pipe failed: %s\n",
+ sc->cue_unit, usbd_errstr(err));
+ }
+ err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_INTR]);
+ if (err) {
+ printf("cue%d: close intr pipe failed: %s\n",
+ sc->cue_unit, usbd_errstr(err));
+ }
+ sc->cue_ep[CUE_ENDPT_INTR] = NULL;
+ }
+
+ /* Free RX resources. */
+ for (i = 0; i < CUE_RX_LIST_CNT; i++) {
+ if (sc->cue_cdata.cue_rx_chain[i].cue_buf != NULL) {
+ free(sc->cue_cdata.cue_rx_chain[i].cue_buf, M_USBDEV);
+ sc->cue_cdata.cue_rx_chain[i].cue_buf = NULL;
+ }
+ if (sc->cue_cdata.cue_rx_chain[i].cue_mbuf != NULL) {
+ m_freem(sc->cue_cdata.cue_rx_chain[i].cue_mbuf);
+ sc->cue_cdata.cue_rx_chain[i].cue_mbuf = NULL;
+ }
+ if (sc->cue_cdata.cue_rx_chain[i].cue_xfer != NULL) {
+ usbd_free_xfer(sc->cue_cdata.cue_rx_chain[i].cue_xfer);
+ sc->cue_cdata.cue_rx_chain[i].cue_xfer = NULL;
+ }
+ }
+
+ /* Free TX resources. */
+ for (i = 0; i < CUE_TX_LIST_CNT; i++) {
+ if (sc->cue_cdata.cue_tx_chain[i].cue_buf != NULL) {
+ free(sc->cue_cdata.cue_tx_chain[i].cue_buf, M_USBDEV);
+ sc->cue_cdata.cue_tx_chain[i].cue_buf = NULL;
+ }
+ if (sc->cue_cdata.cue_tx_chain[i].cue_mbuf != NULL) {
+ m_freem(sc->cue_cdata.cue_tx_chain[i].cue_mbuf);
+ sc->cue_cdata.cue_tx_chain[i].cue_mbuf = NULL;
+ }
+ if (sc->cue_cdata.cue_tx_chain[i].cue_xfer != NULL) {
+ usbd_free_xfer(sc->cue_cdata.cue_tx_chain[i].cue_xfer);
+ sc->cue_cdata.cue_tx_chain[i].cue_xfer = NULL;
+ }
+ }
+
+ ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
+
+ return;
+}
+
+/*
+ * Stop all chip I/O so that the kernel's probe routines don't
+ * get confused by errant DMAs when rebooting.
+ */
+static void cue_shutdown(dev)
+ device_t dev;
+{
+ struct cue_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ cue_reset(sc);
+ cue_stop(sc);
+
+ return;
+}
diff --git a/sys/dev/usb/if_cuereg.h b/sys/dev/usb/if_cuereg.h
new file mode 100644
index 0000000..346cdb5
--- /dev/null
+++ b/sys/dev/usb/if_cuereg.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 1997, 1998, 1999, 2000
+ * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Bill Paul.
+ * 4. Neither the name of the author nor the names of any co-contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/*
+ * Definitions for the CATC Netmate II USB to ethernet controller.
+ */
+
+
+/*
+ * Vendor specific control commands.
+ */
+#define CUE_CMD_RESET 0xF4
+#define CUE_CMD_GET_MACADDR 0xF2
+#define CUE_CMD_WRITEREG 0xFA
+#define CUE_CMD_READREG 0xFB
+#define CUE_CMD_READSRAM 0xF1
+#define CUE_CMD_WRITESRAM 0xFC
+
+/*
+ * Internal registers
+ */
+#define CUE_TX_BUFCNT 0x20
+#define CUE_RX_BUFCNT 0x21
+#define CUE_ADVANCED_OPMODES 0x22
+#define CUE_TX_BUFPKTS 0x23
+#define CUE_RX_BUFPKTS 0x24
+#define CUE_RX_MAXCHAIN 0x25
+
+#define CUE_ETHCTL 0x60
+#define CUE_ETHSTS 0x61
+#define CUE_PAR5 0x62
+#define CUE_PAR4 0x63
+#define CUE_PAR3 0x64
+#define CUE_PAR2 0x65
+#define CUE_PAR1 0x66
+#define CUE_PAR0 0x67
+
+/* Error counters, all 16 bits wide. */
+#define CUE_TX_SINGLECOLL 0x69
+#define CUE_TX_MULTICOLL 0x6B
+#define CUE_TX_EXCESSCOLL 0x6D
+#define CUE_RX_FRAMEERR 0x6F
+
+#define CUE_LEDCTL 0x81
+
+/* Advenced operating mode register */
+#define CUE_AOP_SRAMWAITS 0x03
+#define CUE_AOP_EMBED_RXLEN 0x08
+#define CUE_AOP_RXCOMBINE 0x10
+#define CUE_AOP_TXCOMBINE 0x20
+#define CUE_AOP_EVEN_PKT_READS 0x40
+#define CUE_AOP_LOOPBK 0x80
+
+/* Ethernet control register */
+#define CUE_ETHCTL_RX_ON 0x01
+#define CUE_ETHCTL_LINK_POLARITY 0x02
+#define CUE_ETHCTL_LINK_FORCE_OK 0x04
+#define CUE_ETHCTL_MCAST_ON 0x08
+#define CUE_ETHCTL_PROMISC 0x10
+
+/* Ethernet status register */
+#define CUE_ETHSTS_NO_CARRIER 0x01
+#define CUE_ETHSTS_LATECOLL 0x02
+#define CUE_ETHSTS_EXCESSCOLL 0x04
+#define CUE_ETHSTS_TXBUF_AVAIL 0x08
+#define CUE_ETHSTS_BAD_POLARITY 0x10
+#define CUE_ETHSTS_LINK_OK 0x20
+
+/* LED control register */
+#define CUE_LEDCTL_BLINK_1X 0x00
+#define CUE_LEDCTL_BLINK_2X 0x01
+#define CUE_LEDCTL_BLINK_QUARTER_ON 0x02
+#define CUE_LEDCTL_BLINK_QUARTER_OFF 0x03
+#define CUE_LEDCTL_OFF 0x04
+#define CUE_LEDCTL_FOLLOW_LINK 0x08
+
+/*
+ * Address in ASIC's internal SRAM where the
+ * multicast hash table lives. The table is 64 bytes long,
+ * giving us a 512-bit table. We have to set the bit that
+ * corresponds to the broadcast address in order to enable
+ * reception of broadcast frames.
+ */
+#define CUE_MCAST_TABLE_ADDR 0xFA80
+#define CUE_MCAST_TABLE_LEN 64
+
+#define CUE_TIMEOUT 1000
+#define ETHER_ALIGN 2
+#define CUE_BUFSZ 1536
+#define CUE_CUTOFF 1088
+#define CUE_MIN_FRAMELEN 60
+#define CUE_RX_FRAMES 10
+#define CUE_TX_FRAMES 10
+
+#define CUE_RX_LIST_CNT 1
+#define CUE_TX_LIST_CNT 1
+
+#define CUE_CTL_READ 0x01
+#define CUE_CTL_WRITE 0x02
+
+/*
+ * The interrupt endpoint is currently unused
+ * by the KLSI part.
+ */
+#define CUE_ENDPT_RX 0x0
+#define CUE_ENDPT_TX 0x1
+#define CUE_ENDPT_INTR 0x2
+#define CUE_ENDPT_MAX 0x3
+
+struct cue_type {
+ u_int16_t cue_vid;
+ u_int16_t cue_did;
+ char *cue_name;
+};
+
+struct cue_softc;
+
+struct cue_chain {
+ struct cue_softc *cue_sc;
+ usbd_xfer_handle cue_xfer;
+ char *cue_buf;
+ struct mbuf *cue_mbuf;
+ int cue_accum;
+ int cue_idx;
+};
+
+struct cue_cdata {
+ struct cue_chain cue_tx_chain[CUE_TX_LIST_CNT];
+ struct cue_chain cue_rx_chain[CUE_RX_LIST_CNT];
+ int cue_tx_prod;
+ int cue_tx_cons;
+ int cue_tx_cnt;
+ int cue_rx_prod;
+};
+
+#define CUE_INC(x, y) (x) = (x + 1) % y
+
+struct cue_softc {
+ struct arpcom arpcom;
+ usbd_device_handle cue_udev;
+ usbd_interface_handle cue_iface;
+ int cue_ed[CUE_ENDPT_MAX];
+ usbd_pipe_handle cue_ep[CUE_ENDPT_MAX];
+ int cue_unit;
+ u_int8_t cue_mctab[CUE_MCAST_TABLE_LEN];
+ int cue_if_flags;
+ u_int16_t cue_rxfilt;
+ struct cue_cdata cue_cdata;
+ struct callout_handle cue_stat_ch;
+};
diff --git a/sys/i386/conf/GENERIC b/sys/i386/conf/GENERIC
index ee6713e..b66d11e 100644
--- a/sys/i386/conf/GENERIC
+++ b/sys/i386/conf/GENERIC
@@ -215,4 +215,5 @@ pseudo-device bpf #Berkeley packet filter
#device ums0 # Mouse
# USB Ethernet
#device aue0 # ADMtek USB ethernet
+#device cue0 # CATC USB ethernet
#device kue0 # Kawasaki LSI USB ethernet
diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT
index 3a284bd..1c50f92 100644
--- a/sys/i386/conf/LINT
+++ b/sys/i386/conf/LINT
@@ -2370,11 +2370,15 @@ device ums0
# eval board.
device aue0
#
+# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
+# and Netmate II, and the Belkin F5U111.
+device cue0
+#
# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
-# the Netgear EA101, the D-Link DSB-650, and the SMC 2102USB
-# and 2104USB.
+# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
+# and 2104USB, and the Corega USB-T.
device kue0
# debugging options for the USB subsystem
diff --git a/sys/i386/conf/NEWCARD b/sys/i386/conf/NEWCARD
index 557874d..13601fc 100644
--- a/sys/i386/conf/NEWCARD
+++ b/sys/i386/conf/NEWCARD
@@ -223,6 +223,7 @@ pseudo-device bpf #Berkeley packet filter
#device umass0 # Disks/Mass storage - Requires scbus and da0
#device ums0 # Mouse
#device aue0 # ADMtek USB ethernet
+#device cue0 # CATC USB ethernet
#device kue0 # Kawasaki LSI USB ethernet
options DDB
diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES
index 3a284bd..1c50f92 100644
--- a/sys/i386/conf/NOTES
+++ b/sys/i386/conf/NOTES
@@ -2370,11 +2370,15 @@ device ums0
# eval board.
device aue0
#
+# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
+# and Netmate II, and the Belkin F5U111.
+device cue0
+#
# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
-# the Netgear EA101, the D-Link DSB-650, and the SMC 2102USB
-# and 2104USB.
+# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
+# and 2104USB, and the Corega USB-T.
device kue0
# debugging options for the USB subsystem
diff --git a/sys/i386/conf/PCCARD b/sys/i386/conf/PCCARD
index 8cdfe37..0e34303 100644
--- a/sys/i386/conf/PCCARD
+++ b/sys/i386/conf/PCCARD
@@ -214,4 +214,5 @@ pseudo-device bpf #Berkeley packet filter
#device umass0 # Disks/Mass storage - Requires scbus and da0
#device ums0 # Mouse
#device aue0 # ADMtek USB ethernet
+#device cue0 # CATC USB ethernet
#device kue0 # Kawasaki LSI USB ethernet
diff --git a/sys/i386/i386/userconfig.c b/sys/i386/i386/userconfig.c
index 6f9844a..376f049 100644
--- a/sys/i386/i386/userconfig.c
+++ b/sys/i386/i386/userconfig.c
@@ -378,6 +378,7 @@ static DEV_INFO device_info[] = {
{"plip", "Parallel Port IP link", FLG_FIXED, CLS_NETWORK},
{"aue", "ADMtek AN986 USB ethernet adapter", FLG_FIXED, CLS_NETWORK},
+{"cue", "CATC USB ethernet adapter", FLG_FIXED, CLS_NETWORK},
{"kue", "Kawasaki LSI USB ethernet adapter", FLG_FIXED, CLS_NETWORK},
{"cs", "IBM EtherJet, CS89x0-based Ethernet adapters",0, CLS_NETWORK},
{"ed", "NE1000,NE2000,3C503,WD/SMC80xx Ethernet adapters",0, CLS_NETWORK},
diff --git a/sys/modules/Makefile b/sys/modules/Makefile
index 49a91f1..266f404 100644
--- a/sys/modules/Makefile
+++ b/sys/modules/Makefile
@@ -2,7 +2,7 @@
# XXX present but broken: ip_mroute_mod pcic
-SUBDIR= aha amr aue ccd cd9660 coda dc fdesc fxp if_disc if_ef if_ppp \
+SUBDIR= aha amr aue ccd cd9660 coda cue dc fdesc fxp if_disc if_ef if_ppp \
if_sl if_tun ipfilter ipfw joy kernfs kue md mfs mii mlx msdos \
ncp netgraph nfs ntfs nullfs \
nwfs portal procfs rl sf sis sk ste ti tl \
diff --git a/sys/modules/cue/Makefile b/sys/modules/cue/Makefile
new file mode 100644
index 0000000..fc50723
--- /dev/null
+++ b/sys/modules/cue/Makefile
@@ -0,0 +1,10 @@
+# $FreeBSD$
+
+S = ${.CURDIR}/../..
+.PATH: $S/dev/usb
+KMOD = if_cue
+SRCS = if_cue.c opt_bdg.h opt_usb.h device_if.h bus_if.h
+SRCS += miibus_if.h
+CFLAGS += ${DEBUG_FLAGS}
+
+.include <bsd.kmod.mk>
diff --git a/usr.sbin/sade/devices.c b/usr.sbin/sade/devices.c
index a7591b9..32b8e7d 100644
--- a/usr.sbin/sade/devices.c
+++ b/usr.sbin/sade/devices.c
@@ -86,6 +86,7 @@ static struct _devname {
{ DEVICE_TYPE_FLOPPY, "fd%d", "floppy drive unit A", 2, 0, 64, 4, 'b' },
{ DEVICE_TYPE_FLOPPY, "worm%d", "SCSI optical disk / CDR", 23, 0, 1, 4, 'b' },
{ DEVICE_TYPE_NETWORK, "aue", "ADMtek USB ethernet adapter" },
+ { DEVICE_TYPE_NETWORK, "cue", "CATC USB ethernet adapter" },
{ DEVICE_TYPE_NETWORK, "fpa", "DEC DEFPA PCI FDDI card" },
{ DEVICE_TYPE_NETWORK, "sr", "SDL T1/E1 sync serial PCI card" },
{ DEVICE_TYPE_NETWORK, "cc3i", "SDL HSSI sync serial PCI card" },
diff --git a/usr.sbin/sysinstall/devices.c b/usr.sbin/sysinstall/devices.c
index a7591b9..32b8e7d 100644
--- a/usr.sbin/sysinstall/devices.c
+++ b/usr.sbin/sysinstall/devices.c
@@ -86,6 +86,7 @@ static struct _devname {
{ DEVICE_TYPE_FLOPPY, "fd%d", "floppy drive unit A", 2, 0, 64, 4, 'b' },
{ DEVICE_TYPE_FLOPPY, "worm%d", "SCSI optical disk / CDR", 23, 0, 1, 4, 'b' },
{ DEVICE_TYPE_NETWORK, "aue", "ADMtek USB ethernet adapter" },
+ { DEVICE_TYPE_NETWORK, "cue", "CATC USB ethernet adapter" },
{ DEVICE_TYPE_NETWORK, "fpa", "DEC DEFPA PCI FDDI card" },
{ DEVICE_TYPE_NETWORK, "sr", "SDL T1/E1 sync serial PCI card" },
{ DEVICE_TYPE_NETWORK, "cc3i", "SDL HSSI sync serial PCI card" },
OpenPOWER on IntegriCloud