xntpd 3.3b from UDel

19 files changed, 1936 insertions, 0 deletions

diff --git a/usr.sbin/xntpd/conf/Config.CHATHAM b/usr.sbin/xntpd/conf/Config.CHATHAM
new file mode 100644
index 0000000..41e6fc2
--- /dev/null
+++ b/usr.sbin/xntpd/conf/Config.CHATHAM
@@ -0,0 +1,214 @@
+# Edit this file to reflect information specific to your installation.
+# Then run 'make makeconfig' to propagate the information to all the makefiles,
+# Config.CHATHAM,v 3.1 1993/07/06 01:03:42 jbj Exp
+
+#
+# Definitions for the library:
+#
+# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN
+#	or -DXNTP_AUTO_ENDIAN depending on which way your machine's
+#	bytes go for the benefit of the DES routine.  Most things
+#	sold by DEC, the NS32x32 and the 80386 deserve a
+#	-DXNTP_LITTLE_ENDIAN.  Most of the rest of the world does
+#	it the other way.  If in doubt, pick one, compile
+#	everything and run authstuff/authcert < authstuff/certdata.
+#	If everything fails, do it the other way.
+#
+#	Under BSD, you may define -DXNTP_NETINET_ENDIAN to use
+#	netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and
+#	XNTP_LITTLE_ENDIAN should be used.
+#
+LIBDEFS= -DWORDS_BIGENDIAN
+
+#
+# Library loading:
+#
+# If you don't want your library ranlib'ed, chose the second line
+#
+RANLIB=		ranlib
+#RANLIB=	: # ar does the work of ranlib under System V
+
+#
+# Definitions for programs:
+# 
+# If your compiler doesn't understand the declaration `signed char',
+#       add -DNO_SIGNED_CHAR_DECL.  Your `char' data type had better be
+#	signed.  If you don't know what the compiler knows, try it
+#	without the flag.  If you get a syntax error on line 13 of
+#	ntp.h, add it.  Note that `signed char' is an ANSIism.  Most
+#	older, pcc-derived compilers will need this flag.
+#
+# If your library already has 's_char' defined, add -DS_CHAR_DEFINED.
+#
+# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain
+#	about broadaddr and will hang if you run without a -d flag
+#	on the command line.  I actually can't believe the latter
+#	bug.  If it hangs on your system with the flag defined, peruse
+#	xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it
+#	the other way).  This flag affects xntpd only.
+#
+# For Ultrix 2.0, add -DULT_2_0_SUCKS.  This OS has the same hanging
+#	bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition
+#	has some strangeness concerning signal masks.  Ultrix 2.3 doesn't
+#	have these problems.  If you're running something in between
+#	you're on your own.  This flag affects xntpd only.
+#
+# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c
+#	that sets the battery clock at the same time that it updates
+#	the driftfile. It does this by revving up the niceness, then
+#	sets the time of day to the current time of day. Ordinarily,
+#	you would need this only on non-networked machines.
+#
+# For some machines, settimeofday does not set the sub-second component
+#       of the time correctly. For these machines add -DSETTIMEOFDAY_BROKEN.
+#       If xntpd keeps STEPPING the clock by small amounts, then it is
+#       possible that you are suffering from this problem.
+#
+# There are three ways to pry loose the kernel variables tick and tickadj
+#	needed by ntp_unixclock.c.  One reads kmem and and is enabled
+#	with -DREADKMEM.  One uses Sun's libkvm and is enabled with
+#	-DUSELIBKVM. The last one uses builtin defaults and is enabled
+#	with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or
+#	-DNOKMEM must be defined. Suns and recent BSD should use
+#	-DUSELIBKVM; others should use -DREADKMEM. If -DUSELIBKVM, use
+#	the DAEMONLIBS below to get the kernel routines.
+#
+# If your gethostbyname() routine isn't based on the DNS resolver (and,
+#	in particular, h_errno doesn't exist) add a -DNODNS.  There
+#	doesn't seem to be a good way to detect this automatically which
+#	works in all cases.  This flag affects xntpres only.
+#
+# Adding -DLOCK_PROCESS to the compilation flags will prevent
+#	xntpd from being swapped out on systems where the plock(3) call
+#	is available.
+#
+# The flag -DDEBUG includes some debugging code.
+#
+# The flag -DREFCLOCK causes the basic reference clock support to be
+#	compiled into the daemon.  If you set this you will also want
+#	to configure the particular clock drivers you want in the
+#	CLOCKDEFS= line below.  This flag affects xntpd only.
+#
+# There is an occurance of a call to rindex() in the daemon.  You may
+#	have to include a -Drindex=strrchr to get this to load right.
+#
+# To change the location of the configuration file, use a
+#	-DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
+#
+# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as,
+#	well as -DNOKMEM
+#
+# If your library doesn't include the vsprintf() routine, define
+#	NEED_VSPRINTF.
+#
+# There are three ways to utilize external 1-pps signals. Define -DPPS to
+#	include just the pps routine, such as used by the DCF77 reference clock
+#	driver. Define -DPPSDEV ito include a serial device driver. This
+#	requires a serial port and either a line discipline or STREAMS module.
+#	Define -DPPSCD to include the driver and a special kernal hack
+#	(for SunOS 4.1.1) that intercepts carrier-detect transitions
+#	generated by the pps signal. Only one of these flags should be defined.
+#
+DEFS= -DUSELIBKVM -DDEBUG -DSTREAM -DREFCLOCK -DNO_SIGNED_CHAR_DECL -DPPS -DPPSDEV -DXNTP_RETROFIT_STDLIB -DHAVE_UNISTD_H
+
+#
+#  Authentication types supported.  Choose from DES and MD5.  If you
+#  have a 680x0 type CPU and GNU-C, also choose -DFASTMD5
+#
+AUTHDEFS=-DDES -DMD5
+
+#
+# Clock support definitions (these only make sense if -DREFCLOCK used):
+#
+# Define -DLOCAL_CLOCK to include local pseudo-clock support
+#
+# Define -DPST to include support for the PST 1020 WWV/H receiver.
+#
+# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver.
+#	Define -DWWVBPPS for PPS support via the WWVB receiver; also,
+#	define -DPPSCD in the DEFS above. This requires the ppsclock
+#	streams module under SunOS 4.2.
+#
+# Define -DCHU to include support for a driver to receive the CHU
+#	timecode.  Note that to compile in CHU support you must
+#	previously have installed the CHU serial line discipline in
+#	the kernel of the machine you are doing the compile on.
+#
+# Define -DDCF to include support for the DCF77 receiver. This code
+#	requires a special STREAMS module found in the kernel directory.
+#	Define -DDCFPPS for PPS support via the DCF77 receiver; also,
+#	devine -DPPS in the DEFS above.
+#
+# Define -DMX4200 to support a Magnavox 4200 GPS receiver. Define -DPPSCD
+#	in the DEFS above for PPS support via this receiver. This requires
+#	the ppsclock streams module under SunOS 4.2.	
+#
+# Define -DAS2201 to include support for the Austron 2201 GPS Timing
+#	Receiver. Define -DPPSCD in the DEFS above for PPS support via this
+#	receiver. This requires the ppsclock streams module under SunOS 4.2.
+#
+# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver. This
+#	driver may work with other True-Time products as well.
+#
+# Define -DOMEGA to support a Kinemetrics TrueTime OM-DC OMEGA receiver.
+#
+# Define -DTPRO to support a KSI/Odetics TPRO-S IRIG-B timecode reader. This
+#	requires the Sun interface driver available from KSI.
+#
+# Define -DLEITCH to support a Leitch CSD 5300 Master Clock System Driver
+#	for the HP 5061B Cesium Clock.
+#
+CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DWWVBPPS -DCHU -DDCF -DMX4200 -DAS2201 -DGOES -DOMEGA -DTPRO -DLEITCH -DIRIG
+
+#
+# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine.
+#	If USELIBKVM is defined above, include a -lkvm to get the kernel
+#	routines.
+#
+#DAEMONLIBS= -lmld
+DAEMONLIBS= -lkvm
+#DAEMONLIBS=
+
+#
+# Name resolver library.  Included when loading xntpres, which calls
+# gethostbyname().  Define this if you would rather use a different
+# version of the routine than the one in libc.a
+#
+#RESLIB= -lresolv
+RESLIB=
+
+#
+# Option flags for the C compiler.  A -g if you are uncomfortable
+#
+COPTS= -O
+
+#
+# C compiler to use.  gcc will work, but avoid the -fstrength-reduce option
+# if the version is 1.35 or earlier (using this option caused incorrect
+# code to be generated in the DES key permutation code, and perhaps
+# elsewhere).
+#
+COMPILER= gcc -pipe -Wall -g -O2 -finline-functions -fdelayed-branch -fomit-frame-pointer
+#COMPILER= cc -pipe
+
+#
+# Directory into which binaries should be installed
+#
+BINDIR=	/usr/local/bin
+
+#
+# Special library for adjtime emulation. Used under HP-UX
+# (remember to run make in the adjtime directory)
+#
+#ADJLIB= ../adjtime/libadjtime.a
+ADJLIB=
+
+#
+# BSD emulation library. In theory, this fixes signal semantics under
+# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now
+# a work-around in the code (compiled when hpux80 is defined). In other
+# words, use this for HP-UX prior to 8.0.
+#
+#COMPAT= -lBSD
+COMPAT=
+
diff --git a/usr.sbin/xntpd/conf/Config.MONOMOY b/usr.sbin/xntpd/conf/Config.MONOMOY
new file mode 100644
index 0000000..b9e075f
--- /dev/null
+++ b/usr.sbin/xntpd/conf/Config.MONOMOY
@@ -0,0 +1,189 @@
+# Edit this file to reflect information specific to your installation.
+# Then run 'make makeconfig' to propagate the information to all the makefiles,
+# Config.MONOMOY,v 3.1 1993/07/06 01:03:43 jbj Exp
+
+# Config.bsdi by Bdale Garbee, N3EUA, bdale@gag.com
+#
+#	Tested with the BSDI BSD/386 0.9.3 "gamma 4" revision.  It should
+#	work fine with this or later revs of BSD/386.  
+#
+# Definitions for the library:
+#
+# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN
+#	or -DXNTP_AUTO_ENDIAN depending on which way your machine's
+#	bytes go for the benefit of the DES routine.  Most things
+#	sold by DEC, the NS32x32 and the 80386 deserve a
+#	-DXNTP_LITTLE_ENDIAN.  Most of the rest of the world does
+#	it the other way.  If in doubt, pick one, compile
+#	everything and run authstuff/authcert < authstuff/certdata.
+#	If everything fails, do it the other way.
+#
+#	Under BSD, you may define -DXNTP_NETINET_ENDIAN to use
+#	netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and
+#	XNTP_LITTLE_ENDIAN should be used.
+#
+LIBDEFS= -DXNTP_LITTLE_ENDIAN
+
+#
+# Library loading:
+#
+# If you don't want your library ranlib'ed, chose the second line
+#
+RANLIB=		ranlib
+#RANLIB=	: # ar does the work of ranlib under System V
+
+#
+# Definitions for programs:
+# 
+# If your compiler doesn't understand the declaration `signed char',
+#       add -DNO_SIGNED_CHAR_DECL.  Your `char' data type had better be
+#	signed.  If you don't know what the compiler knows, try it
+#	without the flag.  If you get a syntax error on line 13 of
+#	ntp.h, add it.  Note that `signed char' is an ANSIism.  Most
+#	older, pcc-derived compilers will need this flag.
+#
+# If your library already has 's_char' defined, add -DS_CHAR_DEFINED.
+#
+# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain
+#	about broadaddr and will hang if you run without a -d flag
+#	on the command line.  I actually can't believe the latter
+#	bug.  If it hangs on your system with the flag defined, peruse
+#	xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it
+#	the other way).  This flag affects xntpd only.
+#
+# For Ultrix 2.0, add -DULT_2_0_SUCKS.  This OS has the same hanging
+#	bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition
+#	has some strangeness concerning signal masks.  Ultrix 2.3 doesn't
+#	have these problems.  If you're running something in between
+#	you're on your own.  This flag affects xntpd only.
+#
+# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c
+#	that sets the battery clock at the same time that it updates
+#	the driftfile. It does this by revving up the niceness, then
+#	sets the time of day to the current time of day. Ordinarily,
+#	you would need this only on non-networked machines.
+#
+# There are three ways to pry loose the kernel variables tick and tickadj
+#	needed by ntp_unixclock.c.  One reads kmem and and is enabled
+#	with -DREADKMEM.  One uses Sun's libkvm and is enabled with
+#	-DUSELIBKVM. The last one uses builtin defaults and is enabled
+#	with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or
+#	-DNOKMEM must be defined. Suns and recent BSD should use
+#	-DUSELIBKVM; others should use -DREADKMEM. If -DUSELIBKVM, use
+#	the DAEMONLIBS below to get the kernel routines.
+#
+# If your gethostbyname() routine isn't based on the DNS resolver (and,
+#	in particular, h_errno doesn't exist) add a -DNODNS.  There
+#	doesn't seem to be a good way to detect this automatically which
+#	works in all cases.  This flag affects xntpres only.
+#
+# The flag -DDEBUG includes some debugging code.
+#
+# The flag -DREFCLOCK causes the basic reference clock support to be
+#	compiled into the daemon.  If you set this you will also want
+#	to configure the particular clock drivers you want in the
+#	CLOCKDEFS= line below.  This flag affects xntpd only.
+#
+# There is an occurance of a call to rindex() in the daemon.  You may
+#	have to include a -Drindex=strrchr to get this to load right.
+#
+# To change the location of the configuration file, use a
+#	-DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
+#
+# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as,
+#	well as -DNOKMEM
+#
+# If your library doesn't include the vsprintf() routine, define
+#	NEED_VSPRINTF.
+#
+# Define -DPPS to include support for a 1-pps signal. Define -DPPSDEV
+#	to include a device driver for it. The latter requires a
+#	serial port and either a line discipline or STREAMS module.
+#	The PPS signal may also be generated via a reference clock
+#	module like DCF77. In that case a special define is required for
+#	the reference clock module (only one source of PPS signal should
+#	be used)
+#
+DEFS= -DBSDI -DUSELIBKVM -DDEBUG -DREFCLOCK -DPPS -DCONFIG_FILE=\\"/usr/local/etc/xntp.conf\\" -DHAVE_UNISTD_H
+
+#
+#  Authentication types supported.  Choose from DES and MD5.  If you
+#  have a 680x0 type CPU and GNU-C, also choose -DFASTMD5
+#
+AUTHDEFS=-DDES -DMD5
+
+#
+# Clock support definitions (these only make sense if -DREFCLOCK used):
+#
+# Define -DLOCAL_CLOCK to include local pseudo-clock support
+#
+# Define -DPST to include support for the PST 1020 WWV/H receiver.
+#
+# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver.
+#
+# Define -DCHU to include support for a driver to receive the CHU
+#	timecode.  Note that to compile in CHU support you must
+#	previously have installed the CHU serial line discipline in
+#	the kernel of the machine you are doing the compile on.
+#
+# Define -DDCF to include support for the DCF77 receiver. This code
+#	requires a special STREAMS module found in the kernel directory.
+# Define -DDCFPPS for PPS support via the DCF77 receiver
+#	(see also: -DPPS)
+#
+# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver.
+#
+CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DCHU -DGOES # -DMX4200 -DAS2201
+
+#
+# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine.
+#	If USELIBKVM is defined above, include a -lkvm to get the kernel
+#	routines.
+#
+#DAEMONLIBS= -lmld
+DAEMONLIBS= -lkvm
+#DAEMONLIBS=
+
+#
+# Name resolver library.  Included when loading xntpres, which calls
+# gethostbyname().  Define this if you would rather use a different
+# version of the routine than the one in libc.a
+#
+#RESLIB= -lresolv
+RESLIB=
+
+#
+# Option flags for the C compiler.  A -g if you are uncomfortable
+#
+COPTS= -O
+
+#
+# C compiler to use.  gcc will work, but avoid the -fstrength-reduce option
+# if the version is 1.35 or earlier (using this option caused incorrect
+# code to be generated in the DES key permutation code, and perhaps
+# elsewhere).
+#
+COMPILER= gcc -pipe -Wall -g -O -finline-functions -fdelayed-branch -fomit-frame-pointer
+#COMPILER= cc -pipe -g
+
+#
+# Directory into which binaries should be installed
+#
+BINDIR=	/usr/local/bin
+
+#
+# Special library for adjtime emulation. Used under HP-UX
+# (remember to run make in the adjtime directory)
+#
+#ADJLIB= ../adjtime/libadjtime.a
+ADJLIB=
+
+#
+# BSD emulation library. In theory, this fixes signal semantics under
+# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now
+# a work-around in the code (compiled when hpux80 is defined). In other
+# words, use this for HP-UX prior to 8.0.
+#
+#COMPAT= -lBSD
+COMPAT=
+
diff --git a/usr.sbin/xntpd/conf/Config.TIGER b/usr.sbin/xntpd/conf/Config.TIGER
new file mode 100644
index 0000000..c757ad9
--- /dev/null
+++ b/usr.sbin/xntpd/conf/Config.TIGER
@@ -0,0 +1,185 @@
+# Edit this file to reflect information specific to your installation.
+# Then run 'make makeconfig' to propagate the information to all the makefiles,
+# Config.TIGER,v 3.1 1993/07/06 01:03:45 jbj Exp
+
+#
+# Definitions for the library:
+#
+# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN
+#	or -DXNTP_AUTO_ENDIAN depending on which way your machine's
+#	bytes go for the benefit of the DES routine.  Most things
+#	sold by DEC, the NS32x32 and the 80386 deserve a
+#	-DXNTP_LITTLE_ENDIAN.  Most of the rest of the world does
+#	it the other way.  If in doubt, pick one, compile
+#	everything and run authstuff/authcert < authstuff/certdata.
+#	If everything fails, do it the other way.
+#
+#	Under BSD, you may define -DXNTP_NETINET_ENDIAN to use
+#	netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and
+#	XNTP_LITTLE_ENDIAN should be used.
+#
+LIBDEFS= -DXNTP_LITTLE_ENDIAN
+
+#
+# Library loading:
+#
+# If you don't want your library ranlib'ed, chose the second line
+#
+RANLIB=		ranlib
+#RANLIB=	: # ar does the work of ranlib under System V
+
+#
+# Definitions for programs:
+# 
+# If your compiler doesn't understand the declaration `signed char',
+#       add -DNO_SIGNED_CHAR_DECL.  Your `char' data type had better be
+#	signed.  If you don't know what the compiler knows, try it
+#	without the flag.  If you get a syntax error on line 13 of
+#	ntp.h, add it.  Note that `signed char' is an ANSIism.  Most
+#	older, pcc-derived compilers will need this flag.
+#
+# If your library already has 's_char' defined, add -DS_CHAR_DEFINED.
+#
+# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain
+#	about broadaddr and will hang if you run without a -d flag
+#	on the command line.  I actually can't believe the latter
+#	bug.  If it hangs on your system with the flag defined, peruse
+#	xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it
+#	the other way).  This flag affects xntpd only.
+#
+# For Ultrix 2.0, add -DULT_2_0_SUCKS.  This OS has the same hanging
+#	bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition
+#	has some strangeness concerning signal masks.  Ultrix 2.3 doesn't
+#	have these problems.  If you're running something in between
+#	you're on your own.  This flag affects xntpd only.
+#
+# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c
+#	that sets the battery clock at the same time that it updates
+#	the driftfile. It does this by revving up the niceness, then
+#	sets the time of day to the current time of day. Ordinarily,
+#	you would need this only on non-networked machines.
+#
+# There are three ways to pry loose the kernel variables tick and tickadj
+#	needed by ntp_unixclock.c.  One reads kmem and and is enabled
+#	with -DREADKMEM.  One uses Sun's libkvm and is enabled with
+#	-DUSELIBKVM. The last one uses builtin defaults and is enabled
+#	with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or
+#	-DNOKMEM must be defined. Suns and recent BSD should use
+#	-DUSELIBKVM; others should use -DREADKMEM. If -DUSELIBKVM, use
+#	the DAEMONLIBS below to get the kernel routines.
+#
+# If your gethostbyname() routine isn't based on the DNS resolver (and,
+#	in particular, h_errno doesn't exist) add a -DNODNS.  There
+#	doesn't seem to be a good way to detect this automatically which
+#	works in all cases.  This flag affects xntpres only.
+#
+# The flag -DDEBUG includes some debugging code.
+#
+# The flag -DREFCLOCK causes the basic reference clock support to be
+#	compiled into the daemon.  If you set this you will also want
+#	to configure the particular clock drivers you want in the
+#	CLOCKDEFS= line below.  This flag affects xntpd only.
+#
+# There is an occurance of a call to rindex() in the daemon.  You may
+#	have to include a -Drindex=strrchr to get this to load right.
+#
+# To change the location of the configuration file, use a
+#	-DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
+#
+# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as,
+#	well as -DNOKMEM
+#
+# If your library doesn't include the vsprintf() routine, define
+#	NEED_VSPRINTF.
+#
+# Define -DPPS to include support for a 1-pps signal. Define -DPPSDEV
+#	to include a device driver for it. The latter requires a
+#	serial port and either a line discipline or STREAMS module.
+#	The PPS signal may also be generated via a reference clock
+#	module like DCF77. In that case a special define is required for
+#	the reference clock module (only one source of PPS signal should
+#	be used)
+#
+DEFS= -DREFCLOCK -DS_CHAR_DEFINED -DREADKMEM -DDEBUG -DPLL -DXNTP_RETROFIT_STDLIB -DHAVE_UNISTD_H
+
+#
+#  Authentication types supported.  Choose from DES and MD5.  If you
+#  have a 680x0 type CPU and GNU-C, also choose -DFASTMD5
+#
+AUTHDEFS=-DDES -DMD5
+
+#
+# Clock support definitions (these only make sense if -DREFCLOCK used):
+#
+# Define -DLOCAL_CLOCK to include local pseudo-clock support
+#
+# Define -DPST to include support for the PST 1020 WWV/H receiver.
+#
+# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver.
+#
+# Define -DCHU to include support for a driver to receive the CHU
+#	timecode.  Note that to compile in CHU support you must
+#	previously have installed the CHU serial line discipline in
+#	the kernel of the machine you are doing the compile on.
+#
+# Define -DDCF to include support for the DCF77 receiver. This code
+#	requires a special STREAMS module found in the kernel directory.
+# Define -DDCFPPS for PPS support via the DCF77 receiver
+#	(see also: -DPPS)
+#
+# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver.
+#
+CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DGOES -DCHU
+
+#
+# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine.
+#	If USELIBKVM is defined above, include a -lkvm to get the kernel
+#	routines.
+#
+#DAEMONLIBS= -lmld
+#DAEMONLIBS= -lkvm
+DAEMONLIBS=
+
+#
+# Name resolver library.  Included when loading xntpres, which calls
+# gethostbyname().  Define this if you would rather use a different
+# version of the routine than the one in libc.a
+#
+#RESLIB= -lresolv
+RESLIB=
+
+#
+# Option flags for the C compiler.  A -g if you are uncomfortable
+#
+COPTS= -O
+
+#
+# C compiler to use.  gcc will work, but avoid the -fstrength-reduce option
+# if the version is 1.35 or earlier (using this option caused incorrect
+# code to be generated in the DES key permutation code, and perhaps
+# elsewhere).
+#
+COMPILER= gcc -Wall -g -O2 -finline-functions -fdelayed-branch -fomit-frame-pointer
+#COMPILER= cc
+
+#
+# Directory into which binaries should be installed
+#
+BINDIR=	/usr/local/bin
+
+#
+# Special library for adjtime emulation. Used under HP-UX
+# (remember to run make in the adjtime directory)
+#
+#ADJLIB= ../adjtime/libadjtime.a
+ADJLIB=
+
+#
+# BSD emulation library. In theory, this fixes signal semantics under
+# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now
+# a work-around in the code (compiled when hpux80 is defined). In other
+# words, use this for HP-UX prior to 8.0.
+#
+#COMPAT= -lBSD
+COMPAT=
+
diff --git a/usr.sbin/xntpd/conf/Config.TRURO b/usr.sbin/xntpd/conf/Config.TRURO
new file mode 100644
index 0000000..6caa2b8
--- /dev/null
+++ b/usr.sbin/xntpd/conf/Config.TRURO
@@ -0,0 +1,205 @@
+# Edit this file to reflect information specific to your installation.
+# Then run 'make makeconfig' to propagate the information to all the makefiles,
+# Config.TRURO,v 3.1 1993/07/06 01:03:46 jbj Exp
+
+#
+# Definitions for the library:
+#
+# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN
+#	or -DXNTP_AUTO_ENDIAN depending on which way your machine's
+#	bytes go for the benefit of the DES routine.  Most things
+#	sold by DEC, the NS32x32 and the 80386 deserve a
+#	-DXNTP_LITTLE_ENDIAN.  Most of the rest of the world does
+#	it the other way.  If in doubt, pick one, compile
+#	everything and run authstuff/authcert < authstuff/certdata.
+#	If everything fails, do it the other way.
+#
+#	Under BSD, you may define -DXNTP_NETINET_ENDIAN to use
+#	netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and
+#	XNTP_LITTLE_ENDIAN should be used.
+#
+LIBDEFS= -DWORDS_BIGENDIAN
+
+#
+# Library loading:
+#
+# If you don't want your library ranlib'ed, chose the second line
+#
+RANLIB=	: # ar does the work of ranlib under System V
+
+#
+# Definitions for programs:
+# 
+# If your compiler doesn't understand the declaration `signed char',
+#       add -DNO_SIGNED_CHAR_DECL.  Your `char' data type had better be
+#	signed.  If you don't know what the compiler knows, try it
+#	without the flag.  If you get a syntax error on line 13 of
+#	ntp.h, add it.  Note that `signed char' is an ANSIism.  Most
+#	older, pcc-derived compilers will need this flag.
+#
+# If your library already has 's_char' defined, add -DS_CHAR_DEFINED.
+#
+# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain
+#	about broadaddr and will hang if you run without a -d flag
+#	on the command line.  I actually can't believe the latter
+#	bug.  If it hangs on your system with the flag defined, peruse
+#	xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it
+#	the other way).  This flag affects xntpd only.
+#
+# For Ultrix 2.0, add -DULT_2_0_SUCKS.  This OS has the same hanging
+#	bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition
+#	has some strangeness concerning signal masks.  Ultrix 2.3 doesn't
+#	have these problems.  If you're running something in between
+#	you're on your own.  This flag affects xntpd only.
+#
+# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c
+#	that sets the battery clock at the same time that it updates
+#	the driftfile. It does this by revving up the niceness, then
+#	sets the time of day to the current time of day. Ordinarily,
+#	you would need this only on non-networked machines.
+#
+# For some machines, settimeofday does not set the sub-second component
+#       of the time correctly. For these machines add -DSETTIMEOFDAY_BROKEN.
+#       If xntpd keeps STEPPING the clock by small amounts, then it is
+#       possible that you are suffering from this problem.
+#
+# There are four ways to pry loose the kernel variables tick and tickadj
+#	needed by ntp_unixclock.c.  One reads kmem and and is enabled
+#	with -DREADKMEM.  One uses Sun's libkvm and is enabled with
+#	-DUSELIBKVM. The last one uses builtin defaults and is enabled
+#	with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or
+#	-DNOKMEM must be defined. Suns, if they are not running Solaris,
+#       and recent BSD should use -DUSELIBKVM; others should use 
+#       -DREADKMEM. Soalris 2.1 should use -DSOLARIS.
+#       If -DUSELIBKVM, use the DAEMONLIBS below to get the 
+#       kernel routines.
+#
+# If your gethostbyname() routine isn't based on the DNS resolver (and,
+#	in particular, h_errno doesn't exist) add a -DNODNS.  There
+#	doesn't seem to be a good way to detect this automatically which
+#	works in all cases.  This flag affects xntpres only.
+#
+# The flag -DDEBUG includes some debugging code.
+#
+# The flag -DREFCLOCK causes the basic reference clock support to be
+#	compiled into the daemon.  If you set this you will also want
+#	to configure the particular clock drivers you want in the
+#	CLOCKDEFS= line below.  This flag affects xntpd only.
+#
+# There is an occurance of a call to rindex() in the daemon.  You may
+#	have to include a -Drindex=strrchr to get this to load right.
+#
+# To change the location of the configuration file, use a
+#	-DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
+#
+# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as,
+#	well as -DNOKMEM
+#
+# Under Solaris 2.1, you must use -DSOLARIS and -DSLEWALWAYS.
+#       Don't define USELIBKVM, NOKMEM or READKMEM.
+#
+# If your library doesn't include the vsprintf() routine, define
+#	NEED_VSPRINTF.
+#
+# There are three ways to utilize external 1-pps signals. Define -DPPS to
+#	include just the pps routine, such as used by the DCF77 reference clock
+#	driver. Define -DPPSDEV ito include a serial device driver. This
+#	requires a serial port and either a line discipline or STREAMS module.
+#	Define -DPPSCD to include the driver and a special kernal hack
+#	(for SunOS 4.1.1) that intercepts carrier-detect transitions
+#	generated by the pps signal. Only one of these flags should be defined.
+#
+DEFS= -DDEBUG -DSTREAM -DREFCLOCK -DNO_SIGNED_CHAR_DECL -DSLEWALWAYS -DSOLARIS -DPPS -DSTUPID_SIGNAL -DXNTP_RETROFIT_STDLIB -DHAVE_UNISTD_H
+
+#
+#  Authentication types supported.  Choose from DES and MD5.  If you
+#  have a 680x0 type CPU and GNU-C, also choose -DFASTMD5
+#
+AUTHDEFS=-DDES -DMD5
+
+#
+# Clock support definitions (these only make sense if -DREFCLOCK used):
+#
+# Define -DLOCAL_CLOCK to include local pseudo-clock support
+#
+# Define -DPST to include support for the PST 1020 WWV/H receiver.
+#
+# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver.
+#	Define -DWWVBPPS for PPS support via the WWVB receiver; also,
+#	define -DPPSCD in the DEFS above. This requires the ppsclock
+#	streams module under SunOS 4.2.
+#
+# Define -DCHU to include support for a driver to receive the CHU
+#	timecode.  Note that to compile in CHU support you must
+#	previously have installed the CHU serial line discipline in
+#	the kernel of the machine you are doing the compile on.
+#
+# Define -DDCF to include support for the DCF77 receiver. This code
+#	requires a special STREAMS module found in the kernel directory.
+#	Define -DDCFPPS for PPS support via the DCF77 receiver; also,
+#	devine -DPPS in the DEFS above.
+#
+# Define -DMX4200 to support a Magnavox 4200 GPS receiver. Define -DPPSCD
+#	in the DEFS above for PPS support via this receiver. This requires
+#	the ppsclock streams module under SunOS 4.2.	
+#
+# Define -DAS2201 to include support for the Austron 2201 GPS Timing
+#	Receiver. Define -DPPSCD in the DEFS above for PPS support via this
+#	receiver. This requires the ppsclock streams module under SunOS 4.2.
+#
+# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver. This
+#	driver may work with other True-Time products as well.
+#
+CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DWWVBPPS -DGOES -DCHU -DMX4200 -DAS2201 -DOMEGA -DTPRO -DLEITCH -DIRIG
+
+#
+# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine.
+#	If USELIBKVM is defined above, include a -lkvm to get the kernel
+#	routines.
+#
+#DAEMONLIBS= -lmld
+DAEMONLIBS= 
+
+#
+# Name resolver library.  Included when loading xntpres, which calls
+# gethostbyname().  Define this if you would rather use a different
+# version of the routine than the one in libc.a
+#
+#RESLIB= -lresolv
+RESLIB= -lsocket -lnsl -lelf
+
+#
+# Option flags for the C compiler.  A -g if you are uncomfortable
+#
+COPTS= -O
+
+#
+# C compiler to use.  gcc will work, but avoid the -fstrength-reduce option
+# if the version is 1.35 or earlier (using this option caused incorrect
+# code to be generated in the DES key permutation code, and perhaps
+# elsewhere).
+#
+#COMPILER= gcc -traditional
+COMPILER= gcc -pipe -Wall -g -O2 -finline-functions -fdelayed-branch -fomit-frame-pointer
+
+#
+# Directory into which binaries should be installed
+#
+BINDIR=	/usr/local/bin
+
+#
+# Special library for adjtime emulation. Used under HP-UX
+# (remember to run make in the adjtime directory)
+#
+#ADJLIB= ../adjtime/libadjtime.a
+ADJLIB=
+
+#
+# BSD emulation library. In theory, this fixes signal semantics under
+# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now
+# a work-around in the code (compiled when hpux80 is defined). In other
+# words, use this for HP-UX prior to 8.0.
+#
+#COMPAT= -lBSD
+COMPAT=
+
diff --git a/usr.sbin/xntpd/conf/Config.dartnet b/usr.sbin/xntpd/conf/Config.dartnet
new file mode 100644
index 0000000..b591db3
--- /dev/null
+++ b/usr.sbin/xntpd/conf/Config.dartnet
@@ -0,0 +1,187 @@
+# This is the local configure file (distribution version).
+# You must modify it to fit your particular configuration
+# and name it Config.local
+# The following configuratiions can be auto-generated:
+#
+#	make Config.local.green
+#		make a Config.local that supports a local clock
+#		(i.e. allow fallback to use of the CPU's own clock)
+#	make Config.local.NO.clock
+#		make a Config.local that supports no clocks
+#
+#
+# NOTE TO GREENHORNS
+#
+# For plug-'n-play and no radios or other complicated gadgetry,
+# use "make Config.local.green" or "make Config.local.local" as above.
+#
+# Following defines can be set in the DEFS_OPT= define:
+#
+# The flag -DDEBUG includes some debugging code. To use this, include
+# the define and start the daemon with one or more -d flags, depending
+# on your calibration of pearannoya. The daemon will not detach your
+# terminal in this case. Judicious use of grep will reduce the speaker
+# volume to bearable levels.
+#
+# To change the location of the configuration file, use a
+# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
+#
+# The -DSYSLOG_FILE defines allows logging messages that are normally
+# reported via syslof() in a file. The file name can be configured using
+# the configuration line "logfile <filename>" in CONFIG_FILE.
+#
+# There are three serial port system software interfaces, each of
+# which is peculiar to one or more Unix versions. Define
+# -DHAVE_SYSV_TTYS for basic System V compatibility; define -DSTREAM
+# for POSIX compatibility including System V Streams, and
+# HAVE_BSD_TTYS for 4.3bsd compatibility. Only one of these three
+# should be defined. If none are defined, HAVE_BSD_TTYS is assumed.
+# Usually these defines are already set correctly.
+#
+DEFS_OPT=-DDEBUG
+#
+# The DEFS_LOCAL define picks up all flags from DEFS_OPT (do not delete that)
+# and one of the following:
+#
+# The flag -DREFCLOCK causes the basic reference clock support to be
+# compiled into the daemon. If you set this you may also want to
+# configure the particular clock drivers you want in the CLOCKDEFS= line
+# below. This flag affects xntpd only. This define is included by
+# default when using the "make makeconfig" script.
+#
+# The next two sets of defines are meaningful only when radio clock
+# drivers or special 1-pps signals are to be used. For systems without
+# these features, these delicious complexities can be avoided. Ordinarily,
+# the "make makeconfig" script figures out which ones to use, but your
+# mileage may vary.
+#
+#       There are three ways to utilize external 1-pps signals. Define
+#       -DPPS to include just the pps routine, such as used by the DCF77(PARSE)
+#       clock driver. Define -DPPSCLK to include a serial device driver
+#       which avoids much of the jitter due to upper level port
+#       processing. This requires a dedicated serial port and either the
+#       tty_clock line discipline or tty_clk_streams module, both of
+#       which are in the ./kernel directory. Define -DPPSCD to include a
+#       special driver which intercepts carrier-detect transitions
+#       generated by the pps signal. This requires a nondedicated serial
+#       port and the ppsclock streams module in the ./kernel directory.
+#       Only one of these three flags should be defined.
+#
+# The flag KERNEL_PLL causes code to be compiled for a special feature of
+#	the kernel that (a) implements the phase-lock loop and (b) provides
+#	a user interface to learn time, maximum error and estimated error.
+#	See the file README.kern in the doc directory for further info.
+#	This code is activated only if the relevant kernel features have
+#	been configured; it does not affect operation of unmodified kernels.
+#	To compile it, however, requires a few header files from the
+#	special distribution.
+#
+# Note: following line must always start with DEFS_LOCAL= $(DEFS_OPT)
+DEFS_LOCAL= $(DEFS_OPT) -DPPSPPS -DREFCLOCK -DKERNEL_PLL 
+#
+# Radio clock support definitions (these only make sense if -DREFCLOCK
+# used), which is normally the case. Note that a configuration can include
+# no clocks, more than one type of clock and even multiple clocks of the
+# same type.
+#
+#       For most radio clocks operating with serial ports, accuracy can
+#       be considerably improved through use of the tty_clk line
+#       discipline or tty_clk_STREAMS streams module found in the
+#       ./kernel directory. These gizmos capture a timestamp upon
+#       occurrence of an intercept character and stuff it in the data
+#       stream for the clock driver to munch. To select this mode,
+#       postfix the driver name with the string CLK; that is, WWVB
+#       becomes WWVBCLK. If more than one clock is in use, the CLK
+#       postfix can be used with any or all of them.
+#
+#       Alternatively, for the best accuracy, use the ppsclock streams
+#       module in the ./ppsclock directory to steal the carrier-detect
+#       transition and capture a precision timestamp. At present this
+#       works only with SunOS 4.1.1 or later. To select this mode,
+#       postfix the driver name with the string PPS; that is, AS2201
+#       becomes AS2201PPS. If more than one clock is in use, the PPS
+#       postfix should be used with only one of them. If any PPS
+#       postfix is defined, the -DPPSPPS define should be used on the
+#       DEFS above.
+#
+# Define -DLOCAL_CLOCK for a local pseudo-clock to masquerade as a
+# reference clock for those subnets without access to the real thing.
+# Works in all systems and requires no hardware support. This is defined
+# by default when using the "make makeconfig" script and greenhorn
+# configuraiton.
+#
+# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver
+# supports both the CLK and PPS modes. It should work in all systems
+# with a serial port.
+#
+# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It
+# should work in all systems with a serial port. The driver supports
+# both the CLK and PPS modes if the requisite kernel support is installed.
+#
+# Define -DCHU for a special CHU receiver using an ordinary shortwave
+# radio. This requires the chu_clk line discipline or chu_clk_STREAMS
+# module in the ./kernel directory. At present, this driver works only
+# on SunOS4.1.x; operation in other systems has not been confirmed.
+# Construction details for a suitable modem can be found in the ./gadget
+# directory. The driver supports # neither the CLK nor PPS modes.
+#
+# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance
+# this requires a special parsestreams STREAMS (SunOS 4.x) module in the
+# ./parse directory. Define -DPARSEPPS for PPS support via the
+# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above.
+# Define:       -DCLOCK_MEINBERG for Meinberg clocks
+#               -DCLOCK_SCHMID   for Schmid receivers
+#               -DCLOCK_DCF7000  for ELV DCF7000
+#               -DCLOCK_RAWDCF   for simple receivers (100/200ms pulses on Rx)
+#		-DCLOCK_TRIMSV6  for Trimble SV6 GPS receiver
+#
+# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this
+# driver works only on SunOS4.1.x with CPU serial ports only. The PPS
+# mode is required.
+#
+# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should
+# work in all systems with a serial port. The driver does not support the
+# CLK mode, but does support the PPS mode. If the radio is connected to
+# more than one machine, the PPS mode is required.
+#
+# Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This
+# driver is known to work with some other TrueTime products as well,
+# including the GPS-DC GPS receiver. It should work in all systems with
+# a serial port. The driver does not support the CLK mode, but does
+# support the PPS mode.
+#
+# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It
+# should work in all systems with a serial port. The driver does not
+# support the CLK mode, but does support the PPS mode.
+#
+# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This
+# requires the SunOS interface driver available from KSI. The driver
+# supports neither the CLK nor PPS modes.
+#
+# Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for
+# the HP 5061B Cesium Clock. It should work in all systems with a serial
+# port. The driver does not support the CLK mode, but does support the
+# PPS mode.
+#
+# Define -DMSFEESPPS for an EES M201 MSF receiver. It currently only works
+# under SunOS 4.x with the PPSCD (ppsclock) STREAMS module, but the RCS
+# files on cl.cam.ac.uk still has support for CLK and CBREAK modes.
+#
+# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of
+# the Sun SPARCstations. This requires a modified BSD audio driver and
+# exclusive access to the audio port. A memo describing how it works and
+# how to install the driver is in the README.irig file in the ./doc
+# directory.
+#
+# Note: The following defines result in compilation of all the above radio
+# clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and
+# ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes
+# are removed and the IRIG, PARSE* and CLOCK* deleted, all of the rest compile
+# under Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC
+# OSF/1 Alpha.
+#
+CLOCKDEFS=-DAS2201PPS -DCHU -DGOES -DIRIG -DLEITCH -DLOCAL_CLOCK -DMX4200PPS -DOMEGA  -DPSTCLK -DTPRO  -DWWVBCLK 
+#
+# Directory into which binaries should be installed (default /usr/local)
+#
+BINDIR=	/usr/local/bin
diff --git a/usr.sbin/xntpd/conf/Config.local b/usr.sbin/xntpd/conf/Config.local
new file mode 100644
index 0000000..4c5095c
--- /dev/null
+++ b/usr.sbin/xntpd/conf/Config.local
@@ -0,0 +1,190 @@
+# This is the local configure file (distribution version).
+# You must modify it to fit your particular configuration
+# and name it Config.local
+# The following configuratiions can be auto-generated:
+#
+#	make Config.local.green
+#		make a Config.local that supports a local clock
+#		(i.e. allow fallback to use of the CPU's own clock)
+#	make Config.local.NO.clock
+#		make a Config.local that supports no clocks
+#
+#
+# NOTE TO GREENHORNS
+#
+# For plug-'n-play and no radios or other complicated gadgetry,
+# use "make Config.local.green" as above.
+#
+# Following defines can be set in the DEFS_OPT= define:
+#
+# The flag -DDEBUG includes some debugging code. To use this, include
+# the define and start the daemon with one or more -d flags, depending
+# on your calibration of pearannoya. The daemon will not detach your
+# terminal in this case. Judicious use of grep will reduce the speaker
+# volume to bearable levels.
+#
+# To change the location of the configuration file, use a
+# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
+#
+# The -DSYSLOG_FILE defines allows logging messages that are normally
+# reported via syslof() in a file. The file name can be configured using
+# the configuration line "logfile <filename>" in CONFIG_FILE.
+#
+# There are three serial port system software interfaces, each of
+# which is peculiar to one or more Unix versions. Define
+# -DHAVE_SYSV_TTYS for basic System V compatibility; define -DSTREAM
+# for POSIX compatibility including System V Streams, and
+# HAVE_BSD_TTYS for 4.3bsd compatibility. Only one of these three
+# should be defined. If none are defined, HAVE_BSD_TTYS is assumed.
+# Usually these defines are already set correctly.
+#
+DEFS_OPT=-DDEBUG
+
+#
+# The DEFS_LOCAL define picks up all flags from DEFS_OPT (do not delete that)
+# and one of the following:
+#
+# The flag -DREFCLOCK causes the basic reference clock support to be
+# compiled into the daemon. If you set this you may also want to
+# configure the particular clock drivers you want in the CLOCKDEFS= line
+# below. This flag affects xntpd only. This define is included by
+# default when using the "make makeconfig" script.
+#
+# The next two sets of defines are meaningful only when radio clock
+# drivers or special 1-pps signals are to be used. For systems without
+# these features, these delicious complexities can be avoided. Ordinarily,
+# the "make makeconfig" script figures out which ones to use, but your
+# mileage may vary.
+#
+#       There are three ways to utilize external 1-pps signals. Define
+#       -DPPS to include just the pps routine, such as used by the DCF77(PARSE)
+#       clock driver. Define -DPPSCLK to include a serial device driver
+#       which avoids much of the jitter due to upper level port
+#       processing. This requires a dedicated serial port and either the
+#       tty_clock line discipline or tty_clk_streams module, both of
+#       which are in the ./kernel directory. Define -DPPSCD to include a
+#       special driver which intercepts carrier-detect transitions
+#       generated by the pps signal. This requires a nondedicated serial
+#       port and the ppsclock streams module in the ./kernel directory.
+#       Only one of these three flags should be defined.
+#
+# The flag KERNEL_PLL causes code to be compiled for a special feature of
+#	the kernel that (a) implements the phase-lock loop and (b) provides
+#	a user interface to learn time, maximum error and estimated error.
+#	See the file README.kern in the doc directory for further info.
+#	This code is activated only if the relevant kernel features have
+#	been configured; it does not affect operation of unmodified kernels.
+#	To compile it, however, requires a few header files from the
+#	special distribution.
+#
+# Note: following line must always start with DEFS_LOCAL= $(DEFS_OPT)
+DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DPPSPPS -DKERNEL_PLL
+
+#
+# Radio clock support definitions (these only make sense if -DREFCLOCK
+# used), which is normally the case. Note that a configuration can include
+# no clocks, more than one type of clock and even multiple clocks of the
+# same type.
+#
+#       For most radio clocks operating with serial ports, accuracy can
+#       be considerably improved through use of the tty_clk line
+#       discipline or tty_clk_STREAMS streams module found in the
+#       ./kernel directory. These gizmos capture a timestamp upon
+#       occurrence of an intercept character and stuff it in the data
+#       stream for the clock driver to munch. To select this mode,
+#       postfix the driver name with the string CLK; that is, WWVB
+#       becomes WWVBCLK. If more than one clock is in use, the CLK
+#       postfix can be used with any or all of them.
+#
+#       Alternatively, for the best accuracy, use the ppsclock streams
+#       module in the ./ppsclock directory to steal the carrier-detect
+#       transition and capture a precision timestamp. At present this
+#       works only with SunOS 4.1.1 or later. To select this mode,
+#       postfix the driver name with the string PPS; that is, AS2201
+#       becomes AS2201PPS. If more than one clock is in use, the PPS
+#       postfix should be used with only one of them. If any PPS
+#       postfix is defined, the -DPPSPPS define should be used on the
+#       DEFS above.
+#
+# Define -DLOCAL_CLOCK for a local pseudo-clock to masquerade as a
+# reference clock for those subnets without access to the real thing.
+# Works in all systems and requires no hardware support. This is defined
+# by default when using the "make makeconfig" script and greenhorn
+# configuraiton.
+#
+# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver
+# supports both the CLK and PPS modes. It should work in all systems
+# with a serial port.
+#
+# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It
+# should work in all systems with a serial port. The driver supports
+# both the CLK and PPS modes if the requisite kernel support is installed.
+#
+# Define -DCHU for a special CHU receiver using an ordinary shortwave
+# radio. This requires the chu_clk line discipline or chu_clk_STREAMS
+# module in the ./kernel directory. At present, this driver works only
+# on SunOS4.1.x; operation in other systems has not been confirmed.
+# Construction details for a suitable modem can be found in the ./gadget
+# directory. The driver supports # neither the CLK nor PPS modes.
+#
+# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance
+# this requires a special parsestreams STREAMS (SunOS 4.x) module in the
+# ./parse directory. Define -DPARSEPPS for PPS support via the
+# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above.
+# Define:       -DCLOCK_MEINBERG for Meinberg clocks
+#               -DCLOCK_SCHMID   for Schmid receivers
+#               -DCLOCK_DCF7000  for ELV DCF7000
+#               -DCLOCK_RAWDCF   for simple receivers (100/200ms pulses on Rx)
+#		-DCLOCK_TRIMSV6  for Trimble SV6 GPS receiver
+#
+# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this
+# driver works only on SunOS4.1.x with CPU serial ports only. The PPS
+# mode is required.
+#
+# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should
+# work in all systems with a serial port. The driver does not support the
+# CLK mode, but does support the PPS mode. If the radio is connected to
+# more than one machine, the PPS mode is required.
+#
+# Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This
+# driver is known to work with some other TrueTime products as well,
+# including the GPS-DC GPS receiver. It should work in all systems with
+# a serial port. The driver does not support the CLK mode, but does
+# support the PPS mode.
+#
+# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It
+# should work in all systems with a serial port. The driver does not
+# support the CLK mode, but does support the PPS mode.
+#
+# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This
+# requires the SunOS interface driver available from KSI. The driver
+# supports neither the CLK nor PPS modes.
+#
+# Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for
+# the HP 5061B Cesium Clock. It should work in all systems with a serial
+# port. The driver does not support the CLK mode, but does support the
+# PPS mode.
+#
+# Define -DMSFEESPPS for an EES M201 MSF receiver. It currently only works
+# under SunOS 4.x with the PPSCD (ppsclock) STREAMS module, but the RCS
+# files on cl.cam.ac.uk still has support for CLK and CBREAK modes.
+#
+# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of
+# the Sun SPARCstations. This requires a modified BSD audio driver and
+# exclusive access to the audio port. A memo describing how it works and
+# how to install the driver is in the README.irig file in the ./doc
+# directory.
+#
+# Note: The following defines result in compilation of all the above radio
+# clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and
+# ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes
+# are removed and the IRIG, PARSE* and CLOCK* deleted, all of the rest compile
+# under Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC
+# OSF/1 Alpha.
+#
+CLOCKDEFS= -DLOCAL_CLOCK -DAS2201PPS -DCHU -DGOES -DIRIG -DMX4200PPS -DOMEGA -DPSTCLK -DTPRO -DWWVBCLK -DMSFEESPPS -DLEITCH
+
+#
+# Directory into which binaries should be installed (default /usr/local)
+#
+BINDIR=	/usr/local/bin
diff --git a/usr.sbin/xntpd/conf/Config.svr4 b/usr.sbin/xntpd/conf/Config.svr4
new file mode 100644
index 0000000..d6d0661
--- /dev/null
+++ b/usr.sbin/xntpd/conf/Config.svr4
@@ -0,0 +1,167 @@
+#
+# This is the local configure file. Modify it to fit your particular
+# configuration.
+#
+# NOTE TO GREENHORNS
+#
+# For plug-'n-play and no radios or other complicated gadgetry, set the
+# alternate defines as shown.
+#
+# The flag -DDEBUG includes some debugging code. To use this, include
+# the define and start the daemon with one or more -d flags, depending
+# on your calibration of pearannoya. The daemon will not detach your
+# terminal in this case. Judicious use of grep will reduce the speaker
+# volume to bearable levels.
+#
+# To change the location of the configuration file, use a
+# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
+#
+# The flag -DREFCLOCK causes the basic reference clock support to be
+# compiled into the daemon. If you set this you may also want to
+# configure the particular clock drivers you want in the CLOCKDEFS= line
+# below. This flag affects xntpd only. This define is included by
+# default when using the "make makeconfig" script.
+#
+# The next two sets of defines are meaningful only when radio clock
+# drivers or special 1-pps signals are to be used. For systems without
+# these features, these delicious complexities can be avoided. Ordinarily,
+# the "make makeconfig" script figures out which ones to use, but your
+# mileage may vary.
+#
+#       There are three ways to utilize external 1-pps signals. Define
+#       -DPPS to include just the pps routine, such as used by the DCF77
+#       clock driver. Define -DPPSCLK to include a serial device driver
+#       which avoids much of the jitter due to upper level port
+#       processing. This requires a dedicated serial port and either the
+#       tty_clock line discipline or tty_clk_streams module, both of
+#       which are in the ./kernel directory. Define -DPPSCD to include a
+#       special driver which intercepts carrier-detect transitions
+#       generated by the pps signal. This requires a nondedicated serial
+#       port and the ppsclock streams module in the ./kernel directory.
+#       Only one of these three flags should be defined.
+#
+#       There are three serial port system software interfaces, each of
+#       which is peculiar to one or more Unix versions. Define
+#       -DHAVE_SYSV_TTYS for basic System V compatibility; define -DSTREAM
+#       for POSIX compatibility including System V Streams, and
+#	HAVE_BSD_TTYS for 4.3bsd compatibility. Only one of these three
+#       should be defined. If none are defined, HAVE_BSD_TTYS is assumed.
+#	Ordinarily, the correct define is sniffed by the "make makeconfig"
+#	script and automatically included.
+#
+# The flag KERNEL_PLL is a temporary hack to use when the phase-lock loop
+#	is implmented in the kernel. Do not use unless you have modified
+#	kernel routines (see doc/README.kern).
+#
+#DEFS_LOCAL= -DDEBUG -DPPSPPS -DKERNEL_PLL
+DEFS_LOCAL= -DDEBUG
+#DEFS_LOCAL=			# for greenhorns
+#
+# Radio clock support definitions (these only make sense if -DREFCLOCK
+# used), which is normally the case. Note that a configuration can include
+# no clocks, more than one type of clock and even multiple clocks of the
+# same type.
+#
+#       For most radio clocks operating with serial ports, accuracy can
+#       be considerably improved through use of the tty_clk line
+#       discipline or tty_clk_STREAMS streams module found in the
+#       ./kernel directory. These gizmos capture a timestamp upon
+#       occurrence of an intercept character and stuff it in the data
+#       stream for the clock driver to munch. To select this mode,
+#       postfix the driver name with the string CLK; that is, WWVB
+#       becomes WWVBCLK. If more than one clock is in use, the CLK
+#       postfix can be used with any or all of them.
+#
+#       Alternatively, for the best accuracy, use the ppsclock streams
+#       module in the ./ppsclock directory to steal the carrier-detect
+#       transition and capture a precision timestamp. At present this
+#       works only with SunOS 4.1.1 or later. To select this mode,
+#       postfix the driver name with the string PPS; that is, AS2201
+#       becomes AS2201PPS. If more than one clock is in use, the PPS
+#       postfix should be used with only one of them. If any PPS
+#       postfix is defined, the -DPPSPPS define should be used on the
+#       DEFS above.
+#
+# Define -DLOCAL_CLOCK for a local pseudo-clock to masquerade as a
+# reference clock for those subnets without access to the real thing.
+# Works in all systems and requires no hardware support. This is defined
+# by default when using the "make makeconfig" script.
+#
+# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver
+# supports both the CLK and PPS modes. It should work in all systems
+# with a serial port.
+#
+# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It
+# should work in all systems with a serial port. The driver supports
+# both the CLK and PPS modes if the requisite kernel support is installed.
+#
+# Define -DCHU for a special CHU receiver using an ordinary shortwave
+# radio. This requires the chu_clk line discipline or chu_clk_STREAMS
+# module in the ./kernel directory. At present, this driver works only
+# on SunOS4.1.x; operation in other systems has not been confirmed.
+# Construction details for a suitable modem can be found in the ./gadget
+# directory. The driver supports # neither the CLK nor PPS modes.
+#
+# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance
+# this requires a special parsestreams STREAMS (SunOS 4.x) module in the
+# ./kernel directory. Define -DPARSEPPS for PPS support via the
+# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above.
+# Define PARSESTREAM for utilising the STREAMS module for improved
+# precision (currently only SunOS4.x)
+#
+# Define:       -DCLOCK_MEINBERG for Meinberg clocks
+#               -DCLOCK_SCHMID   for Schmid receivers
+#               -DCLOCK_DCF7000  for ELV DCF7000
+#               -DCLOCK_RAWDCF   for simple receivers (100/200ms pulses on Rx)
+#
+# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this
+# driver works only on SunOS4.1.x with CPU serial ports only. The PPS
+# mode is required.
+#
+# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should
+# work in all systems with a serial port. The driver does not support the
+# CLK mode, but does support the PPS mode. If the radio is connected to
+# more than one machine, the PPS mode is required.
+#
+# Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This
+# driver is known to work with some other TrueTime products as well,
+# including the GPS-DC GPS receiver. It should work in all systems with
+# a serial port. The driver does not support the CLK mode, but does
+# support the PPS mode.
+#
+# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It
+# should work in all systems with a serial port. The driver does not
+# support the CLK mode, but does support the PPS mode.
+#
+# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This
+# requires the SunOS interface driver available from KSI. The driver
+# supports neither the CLK nor PPS modes.
+#
+# Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for
+# the HP 5061B Cesium Clock. It should work in all systems with a serial
+# port. The driver does not support the CLK mode, but does support the
+# PPS mode.
+#
+# Define -DMSF for a EES M201 MSF receiver. It should work in all systems
+# with a serial port. The driver does not support the CLK mode, but does
+# support the # PPS mode.
+#
+# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of
+# the Sun SPARCstations. This requires a modified BSD audio driver and
+# exclusive access to the audio port. A memo describing how it works and
+# how to install the driver is in the README.irig file in the ./doc
+# directory.
+#
+# Note: The following defines result in compilation of all the above radio
+# clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and
+# ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes
+# are removed and the IRIG deleted, all of the rest compile under
+# Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC
+# OSF/1 Alpha.
+#
+#CLOCKDEFS= -DAS2201PPS -DCHU -DGOES -DIRIG -DMX4200PPS -DOMEGA -DPST -DPSTCLK -DTPRO -DWWVBCLK
+CLOCKDEFS=			# for greenhorns
+#
+# Directory into which binaries should be installed
+#
+BINDIR=	/usr/etc
diff --git a/usr.sbin/xntpd/conf/README b/usr.sbin/xntpd/conf/README
new file mode 100644
index 0000000..19dcb79
--- /dev/null
+++ b/usr.sbin/xntpd/conf/README
@@ -0,0 +1,8 @@
+README file for directory ./conf of the NTP Version 3 distribution
+
+This directory contains example run-time configuration files for the
+NTP Version 3 daemon xntpd. These files illustrate some of the more
+obtuse configurations you may run into. They are not likely to do
+anything good if run on machines other than their native spot, so don't
+just blindly copy something and put it up. Additional information can
+be found in the ./doc directory of the base directory.
diff --git a/usr.sbin/xntpd/conf/dewey.conf b/usr.sbin/xntpd/conf/dewey.conf
new file mode 100644
index 0000000..523008f
--- /dev/null
+++ b/usr.sbin/xntpd/conf/dewey.conf
@@ -0,0 +1,38 @@
+#
+# NTP configuration file (ntp.conf)
+# dewey.udel.edu (128.175.1.2)
+#
+# Stratum-1 peers
+#
+#peer 128.4.1.5			# dcn5.udel.edu
+#peer 128.8.10.1			# umd1.umd.edu
+#peer 18.72.0.3 version 2	# bitsy.mit.edu
+peer 192.43.244.9		# ncar-fuzz.nsf.net
+peer 132.249.16.1		# sdsc-fuzz.nsf.net
+peer 128.118.46.3 version 2     # otc1.psu.edu
+#peer 130.126.174.40		# truechimer.cso.uiuc.edu
+#peer 128.9.2.129		# wwvb.isi.edu
+#peer 130.43.2.2 version 2	# apple.com
+#
+# Stratum-2 peers
+#
+peer 128.175.1.1                # huey.udel.edu
+#peer 128.175.1.2                # dewey.udel.edu
+peer 128.175.1.3               # louie.udel.edu
+#peer 128.175.2.33               # louie.udel.edu
+#peer 128.175.7.39              # louie.udel.edu
+#
+# Miscellaneous stuff
+#
+monitor yes			# enable monitoring
+precision -7			# clock reading precision (10 msec)
+driftfile /etc/ntp.drift        # path for drift file
+#
+# Authentication stuff
+#
+authenticate yes		# enable authentication
+keys /etc/ntp.keys		# path for key file
+trustedkey 1 2 15		# define trusted keys
+requestkey 15			# key (7) for accessing server variables
+controlkey 15			# key (6) for accessing server variables
+authdelay 0.001501              # authentication delay (VAX 11/780)
diff --git a/usr.sbin/xntpd/conf/grundoon.conf b/usr.sbin/xntpd/conf/grundoon.conf
new file mode 100644
index 0000000..c5aef6e
--- /dev/null
+++ b/usr.sbin/xntpd/conf/grundoon.conf
@@ -0,0 +1,58 @@
+#
+# NTP configuration file (ntp.conf)
+# grundoon.udel.edu (128.4.2.7)
+#
+server 127.127.6.0 prefer	# irig audio decoder
+fudge 127.127.6.0 time1 0.0005
+#pps delay -0.0004		# pps correction for CLK streams module
+server 127.127.4.1		# spectracom 8170/netclock-2 wwvb receiver
+# propagation delay: wwvb 0.0088; receiver delay 0.0173 os delay .0035
+fudge 127.127.4.1 time1 0.0035 flag4 1
+server 127.127.3.1		# pst/traconex 1020 wwv/h receiver
+# propagation delay: wwv 0.0088 wwvh 0.0281; receiver+os delay 0.0035
+fudge 127.127.3.1 time1 0.0123 time2 0.0316
+server 127.127.7.1		# scratchbuilt chu receiver/demodulator
+# propagtion delay: chu 0.0030; receiver+os delay 0.0060
+fudge 127.127.7.1 time1 0.0030 time2 0.0060
+#server 127.127.10.1		# austron 2201 gps receiver
+
+server 127.127.1.2		# local clock
+#server 127.127.12.2		# ksi/odetics tpr0-s irig-b reader
+
+#broadcast 128.4.2.255
+
+peer 128.4.1.1 key 3		# rackety.udel.edu (Sun4c/40 IPC)
+peer 128.4.1.4			# barnstable.udel.edu (Sun4c/65 SS1+)
+#peer 128.4.1.5			# churchy.udel.edu (Bancomm bc700LAN)
+#peer 128.4.2.7	key 3		# grundoon.udel.edu (Sun4c/40 IPC)
+peer 128.4.1.8			# bridgeport.udel.edu (Sun4c/40 IPC)
+peer 128.4.1.20	key 3		# pogo.udel.edu (Sun4c/65 SS1+)
+peer 128.4.1.22			# malarky.udel.edu (Sun4c/50 IPX)
+peer 128.4.1.23			# beauregard.udel.edu (Sun4/40 IPC)
+peer 128.4.1.24			# baldwin.udel.edu (Sun4/40 IPC)
+peer 128.4.1.25			# albert.udel.edu (Sun4c/60 SS1)
+peer 128.4.1.27			# bunnylou.udel.edu (Sun4c/40 IPC)
+peer 128.4.1.28			# cowbird.udel.edu (DEC 5000/240)
+peer 128.4.1.29			# porkypine.udel.edu (DEC 5000/240)
+#
+# Miscellaneous stuff
+#
+monitor yes			# enable monitoring
+precision -18			# clock reading precision (usec)
+driftfile /etc/ntp.drift	# path for drift file
+statsdir /grundoon/ntpstats/	# directory for statistics files
+filegen peerstats file peerstats type day enable
+filegen loopstats file loopstats type day enable
+filegen clockstats file clockstats type day enable
+
+#
+# Authentication stuff
+#
+authenticate yes		# enable authentication
+keys /usr/local/ntp.keys	# path for keys file
+trustedkey 1 2 3 4 14 15	# define trusted keys
+requestkey 15			# key (7) for accessing server variables
+controlkey 15			# key (6) for accessing server variables
+#authdelay 0.000073		# authentication delay (SPARC4c/40 IPC DES)
+authdelay 0.000163		# authentication delay (SPARC4c/40 IPC MD5)
+
diff --git a/usr.sbin/xntpd/conf/malarky.conf b/usr.sbin/xntpd/conf/malarky.conf
new file mode 100644
index 0000000..f887f83
--- /dev/null
+++ b/usr.sbin/xntpd/conf/malarky.conf
@@ -0,0 +1,40 @@
+#
+# NTP configuration file (ntp.conf)
+# malarky.udel.edu (128.4.1.22)
+#
+peer 128.4.1.1			# rackety.udel.edu
+peer 128.4.1.4			# barnstable.udel.edu
+#peer 128.4.1.5			#churchy.udel.edu
+peer 128.4.2.7			# grundoon.udel.edu
+peer 128.4.1.8			# bridgeport.udel.edu
+peer 128.4.1.20 prefer		# pogo.udel.edu
+#peer 128.4.1.22		# malarky.udel.edu
+peer 128.4.1.23			# beauregard.udel.edu
+peer 128.4.1.24			# baldwin.udel.edu
+peer 128.4.1.25			# albert.udel.edu
+peer 128.4.1.27			# bunnylou.udel.edu
+peer 128.4.1.28			# cowbird.udel.edu
+peer 128.4.1.29			# porkypine.udel.edu
+
+#
+# Miscellaneous stuff
+#
+monitor yes			# enable monitoring
+precision -18			# clock reading precision (usec)
+driftfile /etc/ntp.drift        # path for drift file
+statsdir /malarky/ntpstats/	# directory for statistics files
+filegen peerstats file peerstats type day enable
+filegen loopstats file loopstats type day enable
+filegen clockstats file clockstats type day enable
+
+#
+# Authentication stuff
+#
+authenticate yes		# enable authentication
+keys /usr/local/bin/ntp.keys	# path for key file
+trustedkey 1 2 3 4 14 15	# define trusted keys
+requestkey 15			# key (7) for accessing server variables
+controlkey 15			# key (6) for accessing server variables
+#authdelay 0.000047		# authentication delay (Sun4c/50 IPX DES)
+authdelay 0.000094		# authentication delay (Sun4c/50 IPX MD5)
+
diff --git a/usr.sbin/xntpd/conf/ntp.conf.gw b/usr.sbin/xntpd/conf/ntp.conf.gw
new file mode 100644
index 0000000..bd56878
--- /dev/null
+++ b/usr.sbin/xntpd/conf/ntp.conf.gw
@@ -0,0 +1,34 @@
+#
+# peers for gw.ccie.utoronto.ca (128.100.63.2, 128.100.49.104, 128.100.224.224)
+#
+peer 128.4.0.1 key 1		# dcn1.udel.edu
+peer 128.8.10.1	 key 2		# umd1.umd.edu
+peer 128.116.64.3 key 3		# ncarfuzz.ucar.edu
+peer 128.9.2.129 key 4		# wwvb.isi.edu 
+#peer 128.4.0.6 key 1		# dcn6.udel.edu
+#
+# Don't configure associations with the other secondaries.  This is
+# the only one in a machine room and will hold itself pretty stable
+# when all else fails
+#
+monitor yes	# keep track of traffic
+
+#
+# drift file
+#
+driftfile /etc/ntp.drift
+
+#
+# authentication stuff.  We're running authenticated, tell it
+# where the keys are and which to trust.
+#
+authenticate yes
+authdelay 0.000323	# seconds, about right for an RT model 125
+trustedkey 1 2 3 4 21 22 23 24
+keys /etc/ntp.keys
+
+#
+# allow run time reconfiguration using key 65535
+#
+requestkey 65535
+controlkey 65535
diff --git a/usr.sbin/xntpd/conf/ntp.conf.ipl b/usr.sbin/xntpd/conf/ntp.conf.ipl
new file mode 100644
index 0000000..1fd5b7d
--- /dev/null
+++ b/usr.sbin/xntpd/conf/ntp.conf.ipl
@@ -0,0 +1,32 @@
+#
+# peers for ipl.utcs.utoronto.ca (128.100.102.7)
+#
+peer 128.4.0.5 key 1		# dcn5.udel.edu
+peer 128.8.10.1	key 2		# umd1.umd.edu
+peer 192.12.207.1 key 3		# fuzz.sdsc.edu
+peer 128.9.2.129 key 4		# wwvb.isi.edu 
+peer 128.100.63.2 key 21	# gw.ccie
+peer 128.100.49.105 key 22	# suzuki.ccie
+peer 128.100.102.4 key 23	# shiningtree.utcs
+#
+monitor yes	# keep track of traffic
+
+#
+# drift file
+#
+driftfile /etc/ntp.drift
+
+#
+# authentication stuff.  We're running authenticated, tell it
+# where the keys are and which to trust.
+#
+authenticate yes
+authdelay 0.000323	# seconds, about right for an RT model 125
+trustedkey 1 2 3 4 21 22 23
+keys /etc/ntp.keys
+
+#
+# allow run time reconfiguration using key 65535
+#
+requestkey 65535
+controlkey 65535
diff --git a/usr.sbin/xntpd/conf/ntp.conf.nsf b/usr.sbin/xntpd/conf/ntp.conf.nsf
new file mode 100644
index 0000000..298bb7a
--- /dev/null
+++ b/usr.sbin/xntpd/conf/ntp.conf.nsf
@@ -0,0 +1,156 @@
+#
+# Maybe an alternate xntpd configuration for NSS#17
+#
+
+#
+# precision is supported, but you don't really need it.  The code
+# will determine a precision from the kernel's value of _hz which
+# is fine.  Note you shouldn't claim too good a precision on a
+# Unix machine even if the clock carries a lot of bits, since
+# precision also depends on things like I/O delays and scheduling
+# latencies, which Unix machines control poorly.  If you claim better
+# than -6 or -7 it will make the anti-hop aperture tighter than is
+# reasonable for a Unix machine.
+#
+#precision -7
+
+#
+# peers are ncarfuzz.ucar.edu umd1.umd.edu dcn5.udel.edu fuzz.sdsc.edu
+# syntax is  peer addr [ key 1-15 ] [ version 1_or_2 ]
+#
+
+peer 128.116.64.3	# ncarfuzz.ucar.edu
+peer 128.8.10.1		# umd1.umd.edu
+peer 128.4.0.5		# dcn5.udel.edu
+peer 192.12.207.1	# fuzz.sdsc.edu
+
+#
+# Drift file.  Put this in a directory which the daemon can write to.
+# No symbolic links allowed, either, since the daemon updates the file
+# by creating a temporary in the same directory and then rename()'ing
+# it to the file.
+#
+# This is a nice feature.  Once you've got the drift computed it hardly
+# ever takes more than an hour or so to resync after a restart.
+#
+driftfile /etc/ntp.drift
+
+#
+# The server statement causes polling to be done in client mode rather
+# than symmetric active.  It is an alternative to the peer command
+# above.  Which you use depends on what you want to achieve.  Usually
+# it doesn't matter.  Syntax is:
+#
+#server 128.100.49.1 key 4 version 1
+
+#
+# The broadcast statement tells it to start broadcasting time out one
+# of its interfaces.  Syntax is
+#
+#broadcast 128.100.49.255 # [ key n ] [ version n ]
+
+#
+# broadcastclient tells the daemon whether it should attempt to sync
+# to broadcasts or not.  Defaults to `no'.
+#
+#broadcastclient yes # or no
+
+#
+# broadcastdelay configures in a default round-trip delay to use for
+# broadcast time.  It may poll to improve this estimate.
+#
+#broadcastdelay 0.0095		# in seconds
+
+#
+# authenticate configures us into strict authentication mode (or not).
+#
+#authenticate yes	# or no.  Default is no
+
+#
+# authdelay is the time it takes to do an NTP encryption on this host.
+# The current routine is pretty fast.
+#
+#authdelay 0.000340	# in seconds
+
+#
+# trustedkey are used when authenticate is on.  We only trust (and sync to)
+# peers who know these keys.
+#
+#trustedkey 1 3 4 8
+
+#
+# monitor turns on the monitoring facility.  See xntpdc's monlist command.
+# This shows a lot of neat stuff, but I'm not fussy about the implementation.
+# Uses up to 20Kb of memory at run time.  You could try this.
+#
+#monitor yes		# or no.  Default is no
+
+#
+# keys points at the file which holds the authentication keys.
+#
+#keys /etc/ntp.keys
+
+#
+# requestkey indicates which key is to be used for validating
+# runtime reconfiguration requests.  If this isn't defined, or the
+# key isn't in the keys file, you can't do runtime reconfiguration.
+# controlkey indicates which key is to be used for validating
+# mode 6 write variables commands.  If this isn't defined you can't
+# do it.  The only thing the latter is used for is to set leap second
+# warnings on machines with radio clocks.
+#
+#requestkey 65535
+#controlkey 65534
+
+#
+# restrict places restrictions on the punters.  This is implemented as
+# a sorted address-and-mask list, with each entry including a set of
+# flags which define what a host matching the entry *can't* do (the sort
+# also saves CPU time searching the table since it needn't be searched
+# to the end).  The last match in the table defines what the host does.
+# The default entry, which everyone matches, is first, most specific
+# matches are later in the table.  The flags are:
+#
+# ignore	- ignore all traffic from host
+# noserve	- don't give host any time (but let him make queries?)
+# notrust	- give host time, let him make queries, but don't sync to him
+# noquery	- host can have time, but not make queries
+# nomodify	- allow the host to make queries except those which are
+#		  actually run-time configuration commands.
+# notrap	- don't allow matching hosts to set traps.  If noquery is
+#		  set this isn't needed
+# lowpriotrap	- if this guy sets a trap make it easy to delete
+# ntpport	- a different kind of flag.  Makes matches for this entry
+#		  possible only if the source port is 123.
+#
+# To understand this better, take a look at xntpdc's reslist command when the
+# server is running.  This usually prints in the sorted order.
+#
+# This should match the NSS 17 stuff.  Default mask is all ones.
+
+restrict default ignore		# ignore almost everyone
+
+#
+# These guys can be served time and make non-modifying queries
+#
+restrict 129.140.0.0 mask 255.255.0.0 notrust nomodify
+restrict 35.1.1.42 notrust nomodify
+
+#
+# Rest of 35.1.1 gets to look but not touch
+#
+restrict 35.1.1.0 mask 255.255.255.0 noserve nomodify
+
+#
+# modifications can be made from local NSS only
+#
+restrict 129.140.17.0 mask 255.255.255.0 notrust
+restrict 127.0.0.1 notrust
+
+#
+# take time from the following peers, but don't let them peek or modify
+#
+restrict 128.116.64.3 noquery
+restrict 128.8.10.1 noquery
+restrict 128.4.0.5 noquery
+restrict 192.12.207.1 noquery
diff --git a/usr.sbin/xntpd/conf/ntp.conf.shiningtree b/usr.sbin/xntpd/conf/ntp.conf.shiningtree
new file mode 100644
index 0000000..1576ebb
--- /dev/null
+++ b/usr.sbin/xntpd/conf/ntp.conf.shiningtree
@@ -0,0 +1,32 @@
+#
+# peers for shiningtree.utcs.utoronto.ca (128.100.102.4)
+#
+peer 128.4.0.1 key 1		# dcn1.udel.edu
+peer 130.126.174.40 key 2	# truechimer.cso.uiuc.edu
+peer 192.12.207.1 key 3		# fuzz.sdsc.edu
+peer 128.116.64.3 key 4		# ncarfuzz.ucar.edu
+peer 128.100.63.2 key 21	# gw.ccie
+peer 128.100.49.105 key 22	# suzuki.ccie
+peer 128.100.102.7 key 23	# ipl.utcs
+#
+monitor yes	# keep track of traffic
+
+#
+# drift file
+#
+driftfile /etc/ntp.drift
+
+#
+# authentication stuff.  We're running authenticated, tell it
+# where the keys are and which to trust.
+#
+authenticate yes
+authdelay 0.000323	# seconds, about right for an RT model 125
+trustedkey 1 2 3 4 21 22 23
+keys /etc/ntp.keys
+
+#
+# allow run time reconfiguration using key 65535
+#
+requestkey 65535
+controlkey 65535
diff --git a/usr.sbin/xntpd/conf/ntp.conf.suzuki b/usr.sbin/xntpd/conf/ntp.conf.suzuki
new file mode 100644
index 0000000..ee32e7a
--- /dev/null
+++ b/usr.sbin/xntpd/conf/ntp.conf.suzuki
@@ -0,0 +1,43 @@
+#
+# peers for suzuki.ccie.utoronto.ca (128.100.49.105, 128.100.224.225)
+#
+
+#
+# the reference clock, /dev/chu1
+#
+server 127.127.7.1 key 4
+# Propagation delay 2.5 ms, sloppy clock flag on
+fudge 127.127.7.1 time1 0.0025 flag1 1
+
+peer 128.4.0.5 key 1		# dcn5.udel.edu
+peer 128.8.10.1	key 2		# umd1.umd.edu
+peer 128.116.64.34 key 3	# ncarfuzz.ucar.edu
+peer 130.126.174.40 key 4	# truechimer.cso.uiuc.edu
+peer 128.100.49.104 key 24	# gw.ccie
+peer 128.100.102.4 key 22	# shiningtree.utcs
+peer 128.100.102.7 key 22	# ipl.utcs
+
+peer 128.4.0.6 key 1		# dcn6.udel.edu
+
+#
+monitor yes	# keep track of traffic
+
+#
+# drift file
+#
+driftfile /etc/ntp.drift
+
+#
+# authentication stuff.  We're running authenticated, tell it
+# where the keys are and which to trust.
+#
+authenticate yes
+authdelay 0.000323	# seconds, about right for an RT model 125
+trustedkey 1 2 3 4 21 22 23 24
+keys /etc/ntp.keys
+
+#
+# allow run time reconfiguration using key 65535
+#
+requestkey 65535
+controlkey 65535
diff --git a/usr.sbin/xntpd/conf/pogo.conf b/usr.sbin/xntpd/conf/pogo.conf
new file mode 100644
index 0000000..94ac6c8
--- /dev/null
+++ b/usr.sbin/xntpd/conf/pogo.conf
@@ -0,0 +1,50 @@
+#
+# NTP configuration file (ntp.conf)
+# pogo.udel.edu (128.4.1.20)
+#
+server 127.127.10.1 prefer	# austron 2201 gps receiver
+#server 127.127.4.1		# spectracom 8170/netclock-2 wwvb receiver
+# propagation delay: wwvb 0.0088; receiver delay 0.0017
+#fudge 127.127.4.1 time1 0.0017
+
+peer 128.4.1.1 key 3		# rackety.udel.edu (Sun4c/40 IPC)
+peer 128.4.1.2			# mizbeaver.udel.edu
+peer 128.4.1.4			# barnstable.udel.edu (Sun4c/65 SS1+)
+#peer 128.4.1.5			# churchy.udel.edu (Bancomm bc700LAN)
+peer 128.4.2.7 key 3		# grundoon.udel.edu (Sun4c/40 IPC)
+peer 128.4.1.5 maxpoll 8	# churchy.udel.edu (cisco IGS router)
+#peer 128.4.1.8			# bridgeport.udel.edu (Sun4c/40 IPC)
+#peer 128.4.1.20 key 3		# pogo.udel.edu (Sun4c/65 SS1+)
+#peer 128.4.1.22		# malarky.udel.edu (Sun4c/50 IPX)
+#peer 128.4.1.23		# beauregard.udel.edu (Sun4/40 IPC)
+peer 128.4.1.24			# baldwin.udel.edu (Sun4/40 IPC)
+#peer 128.4.1.25		# albert.udel.edu (Sun4c/60 SS1)
+#peer 128.4.1.27		# maccarony.udel.edu (Sun4c/40 IPC)
+peer 128.4.1.29			# porkypine.udel.edu
+peer 132.163.135.130 maxpoll 8	# time_A.timefreq.bldrdoc.gov (ACTS)
+peer 131.188.1.40 maxpoll 8	# ntps1-0.uni-erlangen.de (DCF77)
+peer 129.132.2.21 maxpoll 8	# swisstime.ethz.ch (DCF77)
+peer 130.155.98.13 maxpoll 8	# terss.ml.csiro.au (OMEGA)
+
+#
+# Miscellaneous stuff
+#
+monitor yes			# enable monitoring
+precision -18			# clock reading precision (usec)
+driftfile /etc/ntp.drift        # path for drift file
+statsdir /pogo/ntpstats/	# directory for statistics files
+filegen peerstats file peerstats type day enable
+filegen loopstats file loopstats type day enable
+filegen clockstats file clockstats type day enable
+
+#
+# Authentication stuff
+#
+authenticate yes		# enable authentication
+keys /usr/local/bin/ntp.keys	# path for keys file
+trustedkey 1 2 3 4 14 15	# define trusted keys
+requestkey 15			# key (7) for accessing server variables
+controlkey 15			# key (6) for accessing server variables
+#authdelay 0.000072		# authentication delay (SPARC4c/65 SS1+ DES)
+authdelay 0.000159		# authentication delay (SPARC4c/65 SS1+ MD5)
+
diff --git a/usr.sbin/xntpd/conf/rackety.conf b/usr.sbin/xntpd/conf/rackety.conf
new file mode 100644
index 0000000..1a5181c
--- /dev/null
+++ b/usr.sbin/xntpd/conf/rackety.conf
@@ -0,0 +1,75 @@
+#
+# NTP configuration file (ntp.conf)
+# rackety (128.4.1.1)
+#
+server 127.127.10.1 prefer	# austron 2201 gps receiver
+fudge 127.127.10.1 flag4 1	# enable statistics
+server 127.127.4.1		# spectracom 8170/netclock-2 wwvb receiver
+#propagation delay: wwvb 0.0088; receiver delay 0.0017
+fudge 127.127.4.1 time1 0.0017 value1 2
+
+#
+# ee vaxen
+#
+peer 128.175.1.1		# huey.udel.edu
+peer 128.175.1.2		# louie.udel.edu
+peer 128.175.1.3		# dewey.udel.edu
+
+#
+# munchkins (stratum-1 only)
+#
+peer 128.4.1.2			# mizbeaver.udel.edu
+#peer 128.4.1.5			# churchy.udel.edu
+peer 128.4.2.7 key 3		# grundoon.udel.edu
+peer 128.4.1.20 key 3		# pogo.udel.edu
+
+#
+# dartnet
+#
+peer 140.173.112.2		# ames.dart.net
+peer 140.173.128.1		# la.dart.net
+peer 140.173.64.1		# dc.dart.net
+peer 140.173.144.2		# parc.dart.net
+peer 140.173.80.1		# sri.dart.net
+peer 140.173.96.1		# lbl.dart.net
+peer 140.173.128.2		# isi.dart.net
+peer 140.173.16.1		# udel.dart.net
+peer 140.173.32.1		# bbn.dart.net
+peer 140.173.48.2		# mit.dart.net
+
+#
+# nsfnet t3 backbone
+#
+server 140.222.134.1 version 2	# enss134 (cambridge - mit)
+server 140.222.135.1 version 2	# enss135 (san diego - sdsc)
+peer 140.222.136.1 version 2	# enss136 (college park - sura)
+server 140.222.141.1 version 2	# enss141 (boulder - ncar)
+server 140.222.144.1 version 2	# enss144 (sunnyvale - nasa ames)
+
+#
+# famous players
+#
+#peer 132.163.135.130		# time_A.timefreq.bldrdoc.gov
+
+#
+# Miscellaneous stuff
+#
+monitor yes			# enable monitoring
+precision -18			# clock reading precision (usec)
+driftfile /etc/ntp.drift	# path for drift file
+statsdir /rackety/ntpstats/	# directory for statistics files
+filegen peerstats file peerstats type day enable
+filegen loopstats file loopstats type day enable
+filegen clockstats file clockstats type day enable
+
+#
+# Authentication stuff
+#
+authenticate yes		# enable authentication
+keys /usr/local/bin/ntp.keys	# path for keys file
+trustedkey 1 2 3 4 14 15	# define trusted keys
+requestkey 15			# key (7) for accessing server variables
+controlkey 15			# key (6) for accessing server variables
+#authdelay 0.000073		# authentication delay (SPARC4c/40 IPC DES)
+authdelay 0.000163		# authentication delay (SPARC4c/40 IPC MD5)
+
diff --git a/usr.sbin/xntpd/conf/snow-white.conf b/usr.sbin/xntpd/conf/snow-white.conf
new file mode 100644
index 0000000..a86cb4b
--- /dev/null
+++ b/usr.sbin/xntpd/conf/snow-white.conf
@@ -0,0 +1,33 @@
+#
+# NTP configuration file (ntp.conf)
+# snow-white.udel.edu (128.175.2.15)
+#
+# Stratum-2 peers
+#
+peer 128.175.1.1                # huey.udel.edu
+peer 128.175.1.2                # dewey.udel.edu
+#peer 128.175.1.3               # louie.udel.edu
+peer 128.175.2.33               # louie.udel.edu
+#peer 128.175.7.39              # louie.udel.edu
+#
+# Stratum-3 peers
+#
+peer 128.175.7.4		# sol.cis.udel.edu
+peer 128.175.7.18		# ra.cis.udel.edu
+#peer 128.175.2.15		# snow-white.ee.udel.edu
+peer 128.175.2.21		# opus.ee.udel.edu
+#
+# Miscellaneous stuff
+#
+monitor yes			# enable monitoring
+precision -18			# clock reading precision (1 usec)
+driftfile /etc/ntp.drift        # path for drift file
+#
+# Authentication stuff
+#
+authenticate yes		# enable authentication
+keys /etc/ntp.keys		# path for key file
+trustedkey 1 2 15		# define trusted keys
+requestkey 15			# key (7) for accessing server variables
+controlkey 15			# key (6) for accessing server variables
+authdelay 0.000077              # authentication delay (SPARC IPC)