diff options
| author | roberto <roberto@FreeBSD.org> | 1999-12-22 15:24:45 +0000 |
|---|---|---|
| committer | roberto <roberto@FreeBSD.org> | 1999-12-22 15:24:45 +0000 |
| commit | 07fa87617ade0f00e9d60fa4b1079cac165d6059 (patch) | |
| tree | daf1c2e9a599e9dfc97305d8b5252e8630bea9b9 /usr.sbin/xntpd/conf | |
| parent | 5960602b89278a9a46eb40f3716de826681c1072 (diff) | |
| download | FreeBSD-src-07fa87617ade0f00e9d60fa4b1079cac165d6059.zip FreeBSD-src-07fa87617ade0f00e9d60fa4b1079cac165d6059.tar.gz | |
Bye bye xntpd.
Diffstat (limited to 'usr.sbin/xntpd/conf')
29 files changed, 0 insertions, 2323 deletions
diff --git a/usr.sbin/xntpd/conf/Config.CHATHAM b/usr.sbin/xntpd/conf/Config.CHATHAM deleted file mode 100644 index b1f980b..0000000 --- a/usr.sbin/xntpd/conf/Config.CHATHAM +++ /dev/null @@ -1,211 +0,0 @@ -# Edit this file to reflect information specific to your installation. -# Then run 'make makeconfig' to propagate the information to all the makefiles, -# Config.CHATHAM,v 3.1 1993/07/06 01:03:42 jbj Exp - -# -# Definitions for the library: -# -# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN -# or -DXNTP_AUTO_ENDIAN depending on which way your machine's -# bytes go for the benefit of the DES routine. Most things -# sold by DEC, the NS32x32 and the 80386 deserve a -# -DXNTP_LITTLE_ENDIAN. Most of the rest of the world does -# it the other way. If in doubt, pick one, compile -# everything and run authstuff/authcert < authstuff/certdata. -# If everything fails, do it the other way. -# -# Under BSD, you may define -DXNTP_NETINET_ENDIAN to use -# netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and -# XNTP_LITTLE_ENDIAN should be used. -# -LIBDEFS= -DWORDS_BIGENDIAN - -# -# Library loading: -# -# If you don't want your library ranlib'ed, chose the second line -# -RANLIB= ranlib -#RANLIB= : # ar does the work of ranlib under System V - -# -# Definitions for programs: -# -# If your compiler doesn't understand the declaration `signed char', -# add -DNO_SIGNED_CHAR_DECL. Your `char' data type had better be -# signed. If you don't know what the compiler knows, try it -# without the flag. If you get a syntax error on line 13 of -# ntp.h, add it. Note that `signed char' is an ANSIism. Most -# older, pcc-derived compilers will need this flag. -# -# If your library already has 's_char' defined, add -DS_CHAR_DEFINED. -# -# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain -# about broadaddr and will hang if you run without a -d flag -# on the command line. I actually can't believe the latter -# bug. If it hangs on your system with the flag defined, peruse -# xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it -# the other way). This flag affects xntpd only. -# -# For Ultrix 2.0, add -DULT_2_0_SUCKS. This OS has the same hanging -# bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition -# has some strangeness concerning signal masks. Ultrix 2.3 doesn't -# have these problems. If you're running something in between -# you're on your own. This flag affects xntpd only. -# -# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c -# that sets the battery clock at the same time that it updates -# the driftfile. It does this by revving up the niceness, then -# sets the time of day to the current time of day. Ordinarily, -# you would need this only on non-networked machines. -# -# For some machines, settimeofday does not set the sub-second component -# of the time correctly. For these machines add -DSETTIMEOFDAY_BROKEN. -# If xntpd keeps STEPPING the clock by small amounts, then it is -# possible that you are suffering from this problem. -# -# There are three ways to pry loose the kernel variables tick and tickadj -# needed by ntp_unixclock.c. One reads kmem and and is enabled -# with -DREADKMEM. One uses Sun's libkvm and is enabled with -# -DUSELIBKVM. The last one uses builtin defaults and is enabled -# with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or -# -DNOKMEM must be defined. Suns and recent BSD should use -# -DUSELIBKVM; others should use -DREADKMEM. If -DUSELIBKVM, use -# the DAEMONLIBS below to get the kernel routines. -# -# If your gethostbyname() routine isn't based on the DNS resolver (and, -# in particular, h_errno doesn't exist) add a -DNODNS. There -# doesn't seem to be a good way to detect this automatically which -# works in all cases. This flag affects xntpres only. -# -# Adding -DLOCK_PROCESS to the compilation flags will prevent -# xntpd from being swapped out on systems where the plock(3) call -# is available. -# -# The flag -DDEBUG includes some debugging code. -# -# The flag -DREFCLOCK causes the basic reference clock support to be -# compiled into the daemon. If you set this you will also want -# to configure the particular clock drivers you want in the -# CLOCKDEFS= line below. This flag affects xntpd only. -# -# To change the location of the configuration file, use a -# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar. -# -# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as, -# well as -DNOKMEM -# -# If your library doesn't include the vsprintf() routine, define -# NEED_VSPRINTF. -# -# There are three ways to utilize external 1-pps signals. Define -DPPS to -# include just the pps routine, such as used by the DCF77 reference clock -# driver. Define -DPPSDEV ito include a serial device driver. This -# requires a serial port and either a line discipline or STREAMS module. -# Define -DPPSCD to include the driver and a special kernal hack -# (for SunOS 4.1.1) that intercepts carrier-detect transitions -# generated by the pps signal. Only one of these flags should be defined. -# -DEFS= -DUSELIBKVM -DDEBUG -DSTREAM -DREFCLOCK -DNO_SIGNED_CHAR_DECL -DPPS -DPPSDEV -DXNTP_RETROFIT_STDLIB -DNTP_POSIX_SOURCE - -# -# Authentication types supported. Choose from DES and MD5. If you -# have a 680x0 type CPU and GNU-C, also choose -DFASTMD5 -# -AUTHDEFS=-DDES -DMD5 - -# -# Clock support definitions (these only make sense if -DREFCLOCK used): -# -# Define -DLOCAL_CLOCK to include local pseudo-clock support -# -# Define -DPST to include support for the PST 1020 WWV/H receiver. -# -# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver. -# Define -DWWVBPPS for PPS support via the WWVB receiver; also, -# define -DPPSCD in the DEFS above. This requires the ppsclock -# streams module under SunOS 4.2. -# -# Define -DCHU to include support for a driver to receive the CHU -# timecode. Note that to compile in CHU support you must -# previously have installed the CHU serial line discipline in -# the kernel of the machine you are doing the compile on. -# -# Define -DDCF to include support for the DCF77 receiver. This code -# requires a special STREAMS module found in the kernel directory. -# Define -DDCFPPS for PPS support via the DCF77 receiver; also, -# devine -DPPS in the DEFS above. -# -# Define -DMX4200 to support a Magnavox 4200 GPS receiver. Define -DPPSCD -# in the DEFS above for PPS support via this receiver. This requires -# the ppsclock streams module under SunOS 4.2. -# -# Define -DAS2201 to include support for the Austron 2201 GPS Timing -# Receiver. Define -DPPSCD in the DEFS above for PPS support via this -# receiver. This requires the ppsclock streams module under SunOS 4.2. -# -# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver. This -# driver may work with other True-Time products as well. -# -# Define -DOMEGA to support a Kinemetrics TrueTime OM-DC OMEGA receiver. -# -# Define -DTPRO to support a KSI/Odetics TPRO-S IRIG-B timecode reader. This -# requires the Sun interface driver available from KSI. -# -# Define -DLEITCH to support a Leitch CSD 5300 Master Clock System Driver -# for the HP 5061B Cesium Clock. -# -CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DWWVBPPS -DCHU -DDCF -DMX4200 -DAS2201 -DGOES -DOMEGA -DTPRO -DLEITCH -DIRIG - -# -# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine. -# If USELIBKVM is defined above, include a -lkvm to get the kernel -# routines. -# -#DAEMONLIBS= -lmld -DAEMONLIBS= -lkvm -#DAEMONLIBS= - -# -# Name resolver library. Included when loading xntpres, which calls -# gethostbyname(). Define this if you would rather use a different -# version of the routine than the one in libc.a -# -#RESLIB= -lresolv -RESLIB= - -# -# Option flags for the C compiler. A -g if you are uncomfortable -# -COPTS= -O - -# -# C compiler to use. gcc will work, but avoid the -fstrength-reduce option -# if the version is 1.35 or earlier (using this option caused incorrect -# code to be generated in the DES key permutation code, and perhaps -# elsewhere). -# -COMPILER= gcc -pipe -Wall -g -O2 -finline-functions -fdelayed-branch -fomit-frame-pointer -#COMPILER= cc -pipe - -# -# Directory into which binaries should be installed -# -BINDIR= /usr/local/bin - -# -# Special library for adjtime emulation. Used under HP-UX -# (remember to run make in the adjtime directory) -# -#ADJLIB= ../adjtime/libadjtime.a -ADJLIB= - -# -# BSD emulation library. In theory, this fixes signal semantics under -# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now -# a work-around in the code (compiled when hpux80 is defined). In other -# words, use this for HP-UX prior to 8.0. -# -#COMPAT= -lBSD -COMPAT= - diff --git a/usr.sbin/xntpd/conf/Config.HP-UX b/usr.sbin/xntpd/conf/Config.HP-UX deleted file mode 100644 index ef4fa30..0000000 --- a/usr.sbin/xntpd/conf/Config.HP-UX +++ /dev/null @@ -1,7 +0,0 @@ -# -# Test suite for HPUX 9 (no multicast, kernel mods, disciplines, modem control) -# -DEFS_OPT=-DDEBUG -DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -CLOCKDEFS= -DATOM -DAS2201 -DCHU -DGOES -DGPSTM -DIRIG -DLEITCH -DLOCAL_CLOCK -DMSFEES -DMX4200 -DNMEA -DOMEGA -DPST -DTPRO -DTRAK -DWWVB -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.MONOMOY b/usr.sbin/xntpd/conf/Config.MONOMOY deleted file mode 100644 index 18dddff..0000000 --- a/usr.sbin/xntpd/conf/Config.MONOMOY +++ /dev/null @@ -1,186 +0,0 @@ -# Edit this file to reflect information specific to your installation. -# Then run 'make makeconfig' to propagate the information to all the makefiles, -# Config.MONOMOY,v 3.1 1993/07/06 01:03:43 jbj Exp - -# Config.bsdi by Bdale Garbee, N3EUA, bdale@gag.com -# -# Tested with the BSDI BSD/386 0.9.3 "gamma 4" revision. It should -# work fine with this or later revs of BSD/386. -# -# Definitions for the library: -# -# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN -# or -DXNTP_AUTO_ENDIAN depending on which way your machine's -# bytes go for the benefit of the DES routine. Most things -# sold by DEC, the NS32x32 and the 80386 deserve a -# -DXNTP_LITTLE_ENDIAN. Most of the rest of the world does -# it the other way. If in doubt, pick one, compile -# everything and run authstuff/authcert < authstuff/certdata. -# If everything fails, do it the other way. -# -# Under BSD, you may define -DXNTP_NETINET_ENDIAN to use -# netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and -# XNTP_LITTLE_ENDIAN should be used. -# -LIBDEFS= -DXNTP_LITTLE_ENDIAN - -# -# Library loading: -# -# If you don't want your library ranlib'ed, chose the second line -# -RANLIB= ranlib -#RANLIB= : # ar does the work of ranlib under System V - -# -# Definitions for programs: -# -# If your compiler doesn't understand the declaration `signed char', -# add -DNO_SIGNED_CHAR_DECL. Your `char' data type had better be -# signed. If you don't know what the compiler knows, try it -# without the flag. If you get a syntax error on line 13 of -# ntp.h, add it. Note that `signed char' is an ANSIism. Most -# older, pcc-derived compilers will need this flag. -# -# If your library already has 's_char' defined, add -DS_CHAR_DEFINED. -# -# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain -# about broadaddr and will hang if you run without a -d flag -# on the command line. I actually can't believe the latter -# bug. If it hangs on your system with the flag defined, peruse -# xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it -# the other way). This flag affects xntpd only. -# -# For Ultrix 2.0, add -DULT_2_0_SUCKS. This OS has the same hanging -# bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition -# has some strangeness concerning signal masks. Ultrix 2.3 doesn't -# have these problems. If you're running something in between -# you're on your own. This flag affects xntpd only. -# -# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c -# that sets the battery clock at the same time that it updates -# the driftfile. It does this by revving up the niceness, then -# sets the time of day to the current time of day. Ordinarily, -# you would need this only on non-networked machines. -# -# There are three ways to pry loose the kernel variables tick and tickadj -# needed by ntp_unixclock.c. One reads kmem and and is enabled -# with -DREADKMEM. One uses Sun's libkvm and is enabled with -# -DUSELIBKVM. The last one uses builtin defaults and is enabled -# with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or -# -DNOKMEM must be defined. Suns and recent BSD should use -# -DUSELIBKVM; others should use -DREADKMEM. If -DUSELIBKVM, use -# the DAEMONLIBS below to get the kernel routines. -# -# If your gethostbyname() routine isn't based on the DNS resolver (and, -# in particular, h_errno doesn't exist) add a -DNODNS. There -# doesn't seem to be a good way to detect this automatically which -# works in all cases. This flag affects xntpres only. -# -# The flag -DDEBUG includes some debugging code. -# -# The flag -DREFCLOCK causes the basic reference clock support to be -# compiled into the daemon. If you set this you will also want -# to configure the particular clock drivers you want in the -# CLOCKDEFS= line below. This flag affects xntpd only. -# -# To change the location of the configuration file, use a -# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar. -# -# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as, -# well as -DNOKMEM -# -# If your library doesn't include the vsprintf() routine, define -# NEED_VSPRINTF. -# -# Define -DPPS to include support for a 1-pps signal. Define -DPPSDEV -# to include a device driver for it. The latter requires a -# serial port and either a line discipline or STREAMS module. -# The PPS signal may also be generated via a reference clock -# module like DCF77. In that case a special define is required for -# the reference clock module (only one source of PPS signal should -# be used) -# -DEFS= -DBSDI -DUSELIBKVM -DDEBUG -DREFCLOCK -DPPS -DCONFIG_FILE=\\"/usr/local/etc/xntp.conf\\" -DNTP_POSIX_SOURCE - -# -# Authentication types supported. Choose from DES and MD5. If you -# have a 680x0 type CPU and GNU-C, also choose -DFASTMD5 -# -AUTHDEFS=-DDES -DMD5 - -# -# Clock support definitions (these only make sense if -DREFCLOCK used): -# -# Define -DLOCAL_CLOCK to include local pseudo-clock support -# -# Define -DPST to include support for the PST 1020 WWV/H receiver. -# -# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver. -# -# Define -DCHU to include support for a driver to receive the CHU -# timecode. Note that to compile in CHU support you must -# previously have installed the CHU serial line discipline in -# the kernel of the machine you are doing the compile on. -# -# Define -DDCF to include support for the DCF77 receiver. This code -# requires a special STREAMS module found in the kernel directory. -# Define -DDCFPPS for PPS support via the DCF77 receiver -# (see also: -DPPS) -# -# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver. -# -CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DCHU -DGOES # -DMX4200 -DAS2201 - -# -# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine. -# If USELIBKVM is defined above, include a -lkvm to get the kernel -# routines. -# -#DAEMONLIBS= -lmld -DAEMONLIBS= -lkvm -#DAEMONLIBS= - -# -# Name resolver library. Included when loading xntpres, which calls -# gethostbyname(). Define this if you would rather use a different -# version of the routine than the one in libc.a -# -#RESLIB= -lresolv -RESLIB= - -# -# Option flags for the C compiler. A -g if you are uncomfortable -# -COPTS= -O - -# -# C compiler to use. gcc will work, but avoid the -fstrength-reduce option -# if the version is 1.35 or earlier (using this option caused incorrect -# code to be generated in the DES key permutation code, and perhaps -# elsewhere). -# -COMPILER= gcc -pipe -Wall -g -O -finline-functions -fdelayed-branch -fomit-frame-pointer -#COMPILER= cc -pipe -g - -# -# Directory into which binaries should be installed -# -BINDIR= /usr/local/bin - -# -# Special library for adjtime emulation. Used under HP-UX -# (remember to run make in the adjtime directory) -# -#ADJLIB= ../adjtime/libadjtime.a -ADJLIB= - -# -# BSD emulation library. In theory, this fixes signal semantics under -# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now -# a work-around in the code (compiled when hpux80 is defined). In other -# words, use this for HP-UX prior to 8.0. -# -#COMPAT= -lBSD -COMPAT= - diff --git a/usr.sbin/xntpd/conf/Config.OSF1 b/usr.sbin/xntpd/conf/Config.OSF1 deleted file mode 100644 index f460e9f..0000000 --- a/usr.sbin/xntpd/conf/Config.OSF1 +++ /dev/null @@ -1,7 +0,0 @@ -# -# Test suite for DEC OSF/1 V1.x (no disciplines) -# -DEFS_OPT=-DDEBUG -DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DKERNEL_PLL -DMCAST -CLOCKDEFS= -DACTS -DATOM -DAS2201 -DCHU -DDATUM -DGOES -DGPSTM -DHEATH -DIRIG -DLEITCH -DLOCAL_CLOCK -DMSFEES -DMX4200 -DNMEA -DOMEGA -DPST -DTPRO -DTRAK -DWWVB -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.SunOS b/usr.sbin/xntpd/conf/Config.SunOS deleted file mode 100644 index 42fd1a5..0000000 --- a/usr.sbin/xntpd/conf/Config.SunOS +++ /dev/null @@ -1,7 +0,0 @@ -# -# Test suite for SunOS 4.1.x (kitchen sink) -# -DEFS_OPT=-DDEBUG -DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DMCAST -DKERNEL_PLL -DCLK -DCHU -DPPS -CLOCKDEFS= -DACTS -DATOM -DAS2201 -DCHU -DDATUM -DGOES -DGPSTM -DHEATH -DIRIG -DLEITCH -DLOCAL_CLOCK -DMSFEES -DMX4200 -DNMEA -DOMEGA -DPST -DTPRO -DTRAK -DWWVB -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.TIGER b/usr.sbin/xntpd/conf/Config.TIGER deleted file mode 100644 index 29c6cbd..0000000 --- a/usr.sbin/xntpd/conf/Config.TIGER +++ /dev/null @@ -1,182 +0,0 @@ -# Edit this file to reflect information specific to your installation. -# Then run 'make makeconfig' to propagate the information to all the makefiles, -# Config.TIGER,v 3.1 1993/07/06 01:03:45 jbj Exp - -# -# Definitions for the library: -# -# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN -# or -DXNTP_AUTO_ENDIAN depending on which way your machine's -# bytes go for the benefit of the DES routine. Most things -# sold by DEC, the NS32x32 and the 80386 deserve a -# -DXNTP_LITTLE_ENDIAN. Most of the rest of the world does -# it the other way. If in doubt, pick one, compile -# everything and run authstuff/authcert < authstuff/certdata. -# If everything fails, do it the other way. -# -# Under BSD, you may define -DXNTP_NETINET_ENDIAN to use -# netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and -# XNTP_LITTLE_ENDIAN should be used. -# -LIBDEFS= -DXNTP_LITTLE_ENDIAN - -# -# Library loading: -# -# If you don't want your library ranlib'ed, chose the second line -# -RANLIB= ranlib -#RANLIB= : # ar does the work of ranlib under System V - -# -# Definitions for programs: -# -# If your compiler doesn't understand the declaration `signed char', -# add -DNO_SIGNED_CHAR_DECL. Your `char' data type had better be -# signed. If you don't know what the compiler knows, try it -# without the flag. If you get a syntax error on line 13 of -# ntp.h, add it. Note that `signed char' is an ANSIism. Most -# older, pcc-derived compilers will need this flag. -# -# If your library already has 's_char' defined, add -DS_CHAR_DEFINED. -# -# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain -# about broadaddr and will hang if you run without a -d flag -# on the command line. I actually can't believe the latter -# bug. If it hangs on your system with the flag defined, peruse -# xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it -# the other way). This flag affects xntpd only. -# -# For Ultrix 2.0, add -DULT_2_0_SUCKS. This OS has the same hanging -# bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition -# has some strangeness concerning signal masks. Ultrix 2.3 doesn't -# have these problems. If you're running something in between -# you're on your own. This flag affects xntpd only. -# -# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c -# that sets the battery clock at the same time that it updates -# the driftfile. It does this by revving up the niceness, then -# sets the time of day to the current time of day. Ordinarily, -# you would need this only on non-networked machines. -# -# There are three ways to pry loose the kernel variables tick and tickadj -# needed by ntp_unixclock.c. One reads kmem and and is enabled -# with -DREADKMEM. One uses Sun's libkvm and is enabled with -# -DUSELIBKVM. The last one uses builtin defaults and is enabled -# with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or -# -DNOKMEM must be defined. Suns and recent BSD should use -# -DUSELIBKVM; others should use -DREADKMEM. If -DUSELIBKVM, use -# the DAEMONLIBS below to get the kernel routines. -# -# If your gethostbyname() routine isn't based on the DNS resolver (and, -# in particular, h_errno doesn't exist) add a -DNODNS. There -# doesn't seem to be a good way to detect this automatically which -# works in all cases. This flag affects xntpres only. -# -# The flag -DDEBUG includes some debugging code. -# -# The flag -DREFCLOCK causes the basic reference clock support to be -# compiled into the daemon. If you set this you will also want -# to configure the particular clock drivers you want in the -# CLOCKDEFS= line below. This flag affects xntpd only. -# -# To change the location of the configuration file, use a -# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar. -# -# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as, -# well as -DNOKMEM -# -# If your library doesn't include the vsprintf() routine, define -# NEED_VSPRINTF. -# -# Define -DPPS to include support for a 1-pps signal. Define -DPPSDEV -# to include a device driver for it. The latter requires a -# serial port and either a line discipline or STREAMS module. -# The PPS signal may also be generated via a reference clock -# module like DCF77. In that case a special define is required for -# the reference clock module (only one source of PPS signal should -# be used) -# -DEFS= -DREFCLOCK -DS_CHAR_DEFINED -DREADKMEM -DDEBUG -DPLL -DXNTP_RETROFIT_STDLIB -DNTP_POSIX_SOURCE - -# -# Authentication types supported. Choose from DES and MD5. If you -# have a 680x0 type CPU and GNU-C, also choose -DFASTMD5 -# -AUTHDEFS=-DDES -DMD5 - -# -# Clock support definitions (these only make sense if -DREFCLOCK used): -# -# Define -DLOCAL_CLOCK to include local pseudo-clock support -# -# Define -DPST to include support for the PST 1020 WWV/H receiver. -# -# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver. -# -# Define -DCHU to include support for a driver to receive the CHU -# timecode. Note that to compile in CHU support you must -# previously have installed the CHU serial line discipline in -# the kernel of the machine you are doing the compile on. -# -# Define -DDCF to include support for the DCF77 receiver. This code -# requires a special STREAMS module found in the kernel directory. -# Define -DDCFPPS for PPS support via the DCF77 receiver -# (see also: -DPPS) -# -# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver. -# -CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DGOES -DCHU - -# -# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine. -# If USELIBKVM is defined above, include a -lkvm to get the kernel -# routines. -# -#DAEMONLIBS= -lmld -#DAEMONLIBS= -lkvm -DAEMONLIBS= - -# -# Name resolver library. Included when loading xntpres, which calls -# gethostbyname(). Define this if you would rather use a different -# version of the routine than the one in libc.a -# -#RESLIB= -lresolv -RESLIB= - -# -# Option flags for the C compiler. A -g if you are uncomfortable -# -COPTS= -O - -# -# C compiler to use. gcc will work, but avoid the -fstrength-reduce option -# if the version is 1.35 or earlier (using this option caused incorrect -# code to be generated in the DES key permutation code, and perhaps -# elsewhere). -# -COMPILER= gcc -Wall -g -O2 -finline-functions -fdelayed-branch -fomit-frame-pointer -#COMPILER= cc - -# -# Directory into which binaries should be installed -# -BINDIR= /usr/local/bin - -# -# Special library for adjtime emulation. Used under HP-UX -# (remember to run make in the adjtime directory) -# -#ADJLIB= ../adjtime/libadjtime.a -ADJLIB= - -# -# BSD emulation library. In theory, this fixes signal semantics under -# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now -# a work-around in the code (compiled when hpux80 is defined). In other -# words, use this for HP-UX prior to 8.0. -# -#COMPAT= -lBSD -COMPAT= - diff --git a/usr.sbin/xntpd/conf/Config.TRURO b/usr.sbin/xntpd/conf/Config.TRURO deleted file mode 100644 index 2fc2580..0000000 --- a/usr.sbin/xntpd/conf/Config.TRURO +++ /dev/null @@ -1,202 +0,0 @@ -# Edit this file to reflect information specific to your installation. -# Then run 'make makeconfig' to propagate the information to all the makefiles, -# Config.TRURO,v 3.1 1993/07/06 01:03:46 jbj Exp - -# -# Definitions for the library: -# -# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN -# or -DXNTP_AUTO_ENDIAN depending on which way your machine's -# bytes go for the benefit of the DES routine. Most things -# sold by DEC, the NS32x32 and the 80386 deserve a -# -DXNTP_LITTLE_ENDIAN. Most of the rest of the world does -# it the other way. If in doubt, pick one, compile -# everything and run authstuff/authcert < authstuff/certdata. -# If everything fails, do it the other way. -# -# Under BSD, you may define -DXNTP_NETINET_ENDIAN to use -# netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and -# XNTP_LITTLE_ENDIAN should be used. -# -LIBDEFS= -DWORDS_BIGENDIAN - -# -# Library loading: -# -# If you don't want your library ranlib'ed, chose the second line -# -RANLIB= : # ar does the work of ranlib under System V - -# -# Definitions for programs: -# -# If your compiler doesn't understand the declaration `signed char', -# add -DNO_SIGNED_CHAR_DECL. Your `char' data type had better be -# signed. If you don't know what the compiler knows, try it -# without the flag. If you get a syntax error on line 13 of -# ntp.h, add it. Note that `signed char' is an ANSIism. Most -# older, pcc-derived compilers will need this flag. -# -# If your library already has 's_char' defined, add -DS_CHAR_DEFINED. -# -# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain -# about broadaddr and will hang if you run without a -d flag -# on the command line. I actually can't believe the latter -# bug. If it hangs on your system with the flag defined, peruse -# xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it -# the other way). This flag affects xntpd only. -# -# For Ultrix 2.0, add -DULT_2_0_SUCKS. This OS has the same hanging -# bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition -# has some strangeness concerning signal masks. Ultrix 2.3 doesn't -# have these problems. If you're running something in between -# you're on your own. This flag affects xntpd only. -# -# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c -# that sets the battery clock at the same time that it updates -# the driftfile. It does this by revving up the niceness, then -# sets the time of day to the current time of day. Ordinarily, -# you would need this only on non-networked machines. -# -# For some machines, settimeofday does not set the sub-second component -# of the time correctly. For these machines add -DSETTIMEOFDAY_BROKEN. -# If xntpd keeps STEPPING the clock by small amounts, then it is -# possible that you are suffering from this problem. -# -# There are four ways to pry loose the kernel variables tick and tickadj -# needed by ntp_unixclock.c. One reads kmem and and is enabled -# with -DREADKMEM. One uses Sun's libkvm and is enabled with -# -DUSELIBKVM. The last one uses builtin defaults and is enabled -# with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or -# -DNOKMEM must be defined. Suns, if they are not running Solaris, -# and recent BSD should use -DUSELIBKVM; others should use -# -DREADKMEM. Soalris 2.1 should use -DSOLARIS. -# If -DUSELIBKVM, use the DAEMONLIBS below to get the -# kernel routines. -# -# If your gethostbyname() routine isn't based on the DNS resolver (and, -# in particular, h_errno doesn't exist) add a -DNODNS. There -# doesn't seem to be a good way to detect this automatically which -# works in all cases. This flag affects xntpres only. -# -# The flag -DDEBUG includes some debugging code. -# -# The flag -DREFCLOCK causes the basic reference clock support to be -# compiled into the daemon. If you set this you will also want -# to configure the particular clock drivers you want in the -# CLOCKDEFS= line below. This flag affects xntpd only. -# -# To change the location of the configuration file, use a -# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar. -# -# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as, -# well as -DNOKMEM -# -# Under Solaris 2.1, you must use -DSOLARIS and -DSLEWALWAYS. -# Don't define USELIBKVM, NOKMEM or READKMEM. -# -# If your library doesn't include the vsprintf() routine, define -# NEED_VSPRINTF. -# -# There are three ways to utilize external 1-pps signals. Define -DPPS to -# include just the pps routine, such as used by the DCF77 reference clock -# driver. Define -DPPSDEV ito include a serial device driver. This -# requires a serial port and either a line discipline or STREAMS module. -# Define -DPPSCD to include the driver and a special kernal hack -# (for SunOS 4.1.1) that intercepts carrier-detect transitions -# generated by the pps signal. Only one of these flags should be defined. -# -DEFS= -DDEBUG -DSTREAM -DREFCLOCK -DNO_SIGNED_CHAR_DECL -DSLEWALWAYS -DSOLARIS -DPPS -DSTUPID_SIGNAL -DXNTP_RETROFIT_STDLIB -DNTP_POSIX_SOURCE - -# -# Authentication types supported. Choose from DES and MD5. If you -# have a 680x0 type CPU and GNU-C, also choose -DFASTMD5 -# -AUTHDEFS=-DDES -DMD5 - -# -# Clock support definitions (these only make sense if -DREFCLOCK used): -# -# Define -DLOCAL_CLOCK to include local pseudo-clock support -# -# Define -DPST to include support for the PST 1020 WWV/H receiver. -# -# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver. -# Define -DWWVBPPS for PPS support via the WWVB receiver; also, -# define -DPPSCD in the DEFS above. This requires the ppsclock -# streams module under SunOS 4.2. -# -# Define -DCHU to include support for a driver to receive the CHU -# timecode. Note that to compile in CHU support you must -# previously have installed the CHU serial line discipline in -# the kernel of the machine you are doing the compile on. -# -# Define -DDCF to include support for the DCF77 receiver. This code -# requires a special STREAMS module found in the kernel directory. -# Define -DDCFPPS for PPS support via the DCF77 receiver; also, -# devine -DPPS in the DEFS above. -# -# Define -DMX4200 to support a Magnavox 4200 GPS receiver. Define -DPPSCD -# in the DEFS above for PPS support via this receiver. This requires -# the ppsclock streams module under SunOS 4.2. -# -# Define -DAS2201 to include support for the Austron 2201 GPS Timing -# Receiver. Define -DPPSCD in the DEFS above for PPS support via this -# receiver. This requires the ppsclock streams module under SunOS 4.2. -# -# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver. This -# driver may work with other True-Time products as well. -# -CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DWWVBPPS -DGOES -DCHU -DMX4200 -DAS2201 -DOMEGA -DTPRO -DLEITCH -DIRIG - -# -# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine. -# If USELIBKVM is defined above, include a -lkvm to get the kernel -# routines. -# -#DAEMONLIBS= -lmld -DAEMONLIBS= - -# -# Name resolver library. Included when loading xntpres, which calls -# gethostbyname(). Define this if you would rather use a different -# version of the routine than the one in libc.a -# -#RESLIB= -lresolv -RESLIB= -lsocket -lnsl -lelf - -# -# Option flags for the C compiler. A -g if you are uncomfortable -# -COPTS= -O - -# -# C compiler to use. gcc will work, but avoid the -fstrength-reduce option -# if the version is 1.35 or earlier (using this option caused incorrect -# code to be generated in the DES key permutation code, and perhaps -# elsewhere). -# -#COMPILER= gcc -traditional -COMPILER= gcc -pipe -Wall -g -O2 -finline-functions -fdelayed-branch -fomit-frame-pointer - -# -# Directory into which binaries should be installed -# -BINDIR= /usr/local/bin - -# -# Special library for adjtime emulation. Used under HP-UX -# (remember to run make in the adjtime directory) -# -#ADJLIB= ../adjtime/libadjtime.a -ADJLIB= - -# -# BSD emulation library. In theory, this fixes signal semantics under -# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now -# a work-around in the code (compiled when hpux80 is defined). In other -# words, use this for HP-UX prior to 8.0. -# -#COMPAT= -lBSD -COMPAT= - diff --git a/usr.sbin/xntpd/conf/Config.ULTRIX b/usr.sbin/xntpd/conf/Config.ULTRIX deleted file mode 100644 index 4ead1be..0000000 --- a/usr.sbin/xntpd/conf/Config.ULTRIX +++ /dev/null @@ -1,7 +0,0 @@ -# -# Test suite for Ultrix 4.x (no disciplines) -# -DEFS_OPT=-DDEBUG -DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DKERNEL_PLL -DMCAST -CLOCKDEFS= -DACTS -DATOM -DAS2201 -DCHU -DDATUM -DGOES -DGPSTM -DHEATH -DIRIG -DLEITCH -DLOCAL_CLOCK -DMSFEES -DMX4200 -DNMEA -DOMEGA -DPST -DTPRO -DTRAK -DWWVB -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.VAX b/usr.sbin/xntpd/conf/Config.VAX deleted file mode 100644 index 66b9f91..0000000 --- a/usr.sbin/xntpd/conf/Config.VAX +++ /dev/null @@ -1,7 +0,0 @@ -# -# Test suite for 4.3bsd VAX tahoe (no multicast, kernel mods, disciplines) -# -DEFS_OPT=-DDEBUG -DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -CLOCKDEFS= -DACTS -DATOM -DAS2201 -DCHU -DDATUM -DGOES -DGPSTM -DHEATH -DIRIG -DLEITCH -DLOCAL_CLOCK -DMSFEES -DMX4200 -DNMEA -DOMEGA -DPST -DTPRO -DTRAK -DWWVB -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.dartnet b/usr.sbin/xntpd/conf/Config.dartnet deleted file mode 100644 index b591db3..0000000 --- a/usr.sbin/xntpd/conf/Config.dartnet +++ /dev/null @@ -1,187 +0,0 @@ -# This is the local configure file (distribution version). -# You must modify it to fit your particular configuration -# and name it Config.local -# The following configuratiions can be auto-generated: -# -# make Config.local.green -# make a Config.local that supports a local clock -# (i.e. allow fallback to use of the CPU's own clock) -# make Config.local.NO.clock -# make a Config.local that supports no clocks -# -# -# NOTE TO GREENHORNS -# -# For plug-'n-play and no radios or other complicated gadgetry, -# use "make Config.local.green" or "make Config.local.local" as above. -# -# Following defines can be set in the DEFS_OPT= define: -# -# The flag -DDEBUG includes some debugging code. To use this, include -# the define and start the daemon with one or more -d flags, depending -# on your calibration of pearannoya. The daemon will not detach your -# terminal in this case. Judicious use of grep will reduce the speaker -# volume to bearable levels. -# -# To change the location of the configuration file, use a -# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar. -# -# The -DSYSLOG_FILE defines allows logging messages that are normally -# reported via syslof() in a file. The file name can be configured using -# the configuration line "logfile <filename>" in CONFIG_FILE. -# -# There are three serial port system software interfaces, each of -# which is peculiar to one or more Unix versions. Define -# -DHAVE_SYSV_TTYS for basic System V compatibility; define -DSTREAM -# for POSIX compatibility including System V Streams, and -# HAVE_BSD_TTYS for 4.3bsd compatibility. Only one of these three -# should be defined. If none are defined, HAVE_BSD_TTYS is assumed. -# Usually these defines are already set correctly. -# -DEFS_OPT=-DDEBUG -# -# The DEFS_LOCAL define picks up all flags from DEFS_OPT (do not delete that) -# and one of the following: -# -# The flag -DREFCLOCK causes the basic reference clock support to be -# compiled into the daemon. If you set this you may also want to -# configure the particular clock drivers you want in the CLOCKDEFS= line -# below. This flag affects xntpd only. This define is included by -# default when using the "make makeconfig" script. -# -# The next two sets of defines are meaningful only when radio clock -# drivers or special 1-pps signals are to be used. For systems without -# these features, these delicious complexities can be avoided. Ordinarily, -# the "make makeconfig" script figures out which ones to use, but your -# mileage may vary. -# -# There are three ways to utilize external 1-pps signals. Define -# -DPPS to include just the pps routine, such as used by the DCF77(PARSE) -# clock driver. Define -DPPSCLK to include a serial device driver -# which avoids much of the jitter due to upper level port -# processing. This requires a dedicated serial port and either the -# tty_clock line discipline or tty_clk_streams module, both of -# which are in the ./kernel directory. Define -DPPSCD to include a -# special driver which intercepts carrier-detect transitions -# generated by the pps signal. This requires a nondedicated serial -# port and the ppsclock streams module in the ./kernel directory. -# Only one of these three flags should be defined. -# -# The flag KERNEL_PLL causes code to be compiled for a special feature of -# the kernel that (a) implements the phase-lock loop and (b) provides -# a user interface to learn time, maximum error and estimated error. -# See the file README.kern in the doc directory for further info. -# This code is activated only if the relevant kernel features have -# been configured; it does not affect operation of unmodified kernels. -# To compile it, however, requires a few header files from the -# special distribution. -# -# Note: following line must always start with DEFS_LOCAL= $(DEFS_OPT) -DEFS_LOCAL= $(DEFS_OPT) -DPPSPPS -DREFCLOCK -DKERNEL_PLL -# -# Radio clock support definitions (these only make sense if -DREFCLOCK -# used), which is normally the case. Note that a configuration can include -# no clocks, more than one type of clock and even multiple clocks of the -# same type. -# -# For most radio clocks operating with serial ports, accuracy can -# be considerably improved through use of the tty_clk line -# discipline or tty_clk_STREAMS streams module found in the -# ./kernel directory. These gizmos capture a timestamp upon -# occurrence of an intercept character and stuff it in the data -# stream for the clock driver to munch. To select this mode, -# postfix the driver name with the string CLK; that is, WWVB -# becomes WWVBCLK. If more than one clock is in use, the CLK -# postfix can be used with any or all of them. -# -# Alternatively, for the best accuracy, use the ppsclock streams -# module in the ./ppsclock directory to steal the carrier-detect -# transition and capture a precision timestamp. At present this -# works only with SunOS 4.1.1 or later. To select this mode, -# postfix the driver name with the string PPS; that is, AS2201 -# becomes AS2201PPS. If more than one clock is in use, the PPS -# postfix should be used with only one of them. If any PPS -# postfix is defined, the -DPPSPPS define should be used on the -# DEFS above. -# -# Define -DLOCAL_CLOCK for a local pseudo-clock to masquerade as a -# reference clock for those subnets without access to the real thing. -# Works in all systems and requires no hardware support. This is defined -# by default when using the "make makeconfig" script and greenhorn -# configuraiton. -# -# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver -# supports both the CLK and PPS modes. It should work in all systems -# with a serial port. -# -# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It -# should work in all systems with a serial port. The driver supports -# both the CLK and PPS modes if the requisite kernel support is installed. -# -# Define -DCHU for a special CHU receiver using an ordinary shortwave -# radio. This requires the chu_clk line discipline or chu_clk_STREAMS -# module in the ./kernel directory. At present, this driver works only -# on SunOS4.1.x; operation in other systems has not been confirmed. -# Construction details for a suitable modem can be found in the ./gadget -# directory. The driver supports # neither the CLK nor PPS modes. -# -# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance -# this requires a special parsestreams STREAMS (SunOS 4.x) module in the -# ./parse directory. Define -DPARSEPPS for PPS support via the -# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above. -# Define: -DCLOCK_MEINBERG for Meinberg clocks -# -DCLOCK_SCHMID for Schmid receivers -# -DCLOCK_DCF7000 for ELV DCF7000 -# -DCLOCK_RAWDCF for simple receivers (100/200ms pulses on Rx) -# -DCLOCK_TRIMSV6 for Trimble SV6 GPS receiver -# -# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this -# driver works only on SunOS4.1.x with CPU serial ports only. The PPS -# mode is required. -# -# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should -# work in all systems with a serial port. The driver does not support the -# CLK mode, but does support the PPS mode. If the radio is connected to -# more than one machine, the PPS mode is required. -# -# Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This -# driver is known to work with some other TrueTime products as well, -# including the GPS-DC GPS receiver. It should work in all systems with -# a serial port. The driver does not support the CLK mode, but does -# support the PPS mode. -# -# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It -# should work in all systems with a serial port. The driver does not -# support the CLK mode, but does support the PPS mode. -# -# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This -# requires the SunOS interface driver available from KSI. The driver -# supports neither the CLK nor PPS modes. -# -# Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for -# the HP 5061B Cesium Clock. It should work in all systems with a serial -# port. The driver does not support the CLK mode, but does support the -# PPS mode. -# -# Define -DMSFEESPPS for an EES M201 MSF receiver. It currently only works -# under SunOS 4.x with the PPSCD (ppsclock) STREAMS module, but the RCS -# files on cl.cam.ac.uk still has support for CLK and CBREAK modes. -# -# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of -# the Sun SPARCstations. This requires a modified BSD audio driver and -# exclusive access to the audio port. A memo describing how it works and -# how to install the driver is in the README.irig file in the ./doc -# directory. -# -# Note: The following defines result in compilation of all the above radio -# clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and -# ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes -# are removed and the IRIG, PARSE* and CLOCK* deleted, all of the rest compile -# under Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC -# OSF/1 Alpha. -# -CLOCKDEFS=-DAS2201PPS -DCHU -DGOES -DIRIG -DLEITCH -DLOCAL_CLOCK -DMX4200PPS -DOMEGA -DPSTCLK -DTPRO -DWWVBCLK -# -# Directory into which binaries should be installed (default /usr/local) -# -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.local b/usr.sbin/xntpd/conf/Config.local deleted file mode 100644 index 22c12a3..0000000 --- a/usr.sbin/xntpd/conf/Config.local +++ /dev/null @@ -1,190 +0,0 @@ -# This is the local configure file (distribution version). -# You must modify it to fit your particular configuration -# and name it Config.local -# The following configuratiions can be auto-generated: -# -# make Config.local.green -# make a Config.local that supports a local clock -# (i.e. allow fallback to use of the CPU's own clock) -# make Config.local.NO.clock -# make a Config.local that supports no clocks -# -# -# NOTE TO GREENHORNS -# -# For plug-'n-play and no radios or other complicated gadgetry, -# use "make Config.local.green" as above. -# -# Following defines can be set in the DEFS_OPT= define: -# -# The flag -DDEBUG includes some debugging code. To use this, include -# the define and start the daemon with one or more -d flags, depending -# on your calibration of pearannoya. The daemon will not detach your -# terminal in this case. Judicious use of grep will reduce the speaker -# volume to bearable levels. -# -# To change the location of the configuration file, use a -# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar. -# -# The -DSYSLOG_FILE defines allows logging messages that are normally -# reported via syslof() in a file. The file name can be configured using -# the configuration line "logfile <filename>" in CONFIG_FILE. -# -# There are three serial port system software interfaces, each of -# which is peculiar to one or more Unix versions. Define -# -DHAVE_SYSV_TTYS for basic System V compatibility; define -DSTREAM -# for POSIX compatibility including System V Streams, and -# HAVE_BSD_TTYS for 4.3bsd compatibility. Only one of these three -# should be defined. If none are defined, HAVE_BSD_TTYS is assumed. -# Usually these defines are already set correctly. -# -DEFS_OPT=-DDEBUG - -# -# The DEFS_LOCAL define picks up all flags from DEFS_OPT (do not delete that) -# and one of the following: -# -# The flag -DREFCLOCK causes the basic reference clock support to be -# compiled into the daemon. If you set this you may also want to -# configure the particular clock drivers you want in the CLOCKDEFS= line -# below. This flag affects xntpd only. This define is included by -# default when using the "make makeconfig" script. -# -# The next two sets of defines are meaningful only when radio clock -# drivers or special 1-pps signals are to be used. For systems without -# these features, these delicious complexities can be avoided. Ordinarily, -# the "make makeconfig" script figures out which ones to use, but your -# mileage may vary. -# -# There are three ways to utilize external 1-pps signals. Define -# -DPPS to include just the pps routine, such as used by the DCF77(PARSE) -# clock driver. Define -DPPSCLK to include a serial device driver -# which avoids much of the jitter due to upper level port -# processing. This requires a dedicated serial port and either the -# tty_clock line discipline or tty_clk_streams module, both of -# which are in the ./kernel directory. Define -DPPSCD to include a -# special driver which intercepts carrier-detect transitions -# generated by the pps signal. This requires a nondedicated serial -# port and the ppsclock streams module in the ./kernel directory. -# Only one of these three flags should be defined. -# -# The flag KERNEL_PLL causes code to be compiled for a special feature of -# the kernel that (a) implements the phase-lock loop and (b) provides -# a user interface to learn time, maximum error and estimated error. -# See the file README.kern in the doc directory for further info. -# This code is activated only if the relevant kernel features have -# been configured; it does not affect operation of unmodified kernels. -# To compile it, however, requires a few header files from the -# special distribution. -# -# Note: following line must always start with DEFS_LOCAL= $(DEFS_OPT) -DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DKERNEL_PLL -DMCAST - -# -# Radio clock support definitions (these only make sense if -DREFCLOCK -# used), which is normally the case. Note that a configuration can include -# no clocks, more than one type of clock and even multiple clocks of the -# same type. -# -# For most radio clocks operating with serial ports, accuracy can -# be considerably improved through use of the tty_clk line -# discipline or tty_clk_STREAMS streams module found in the -# ./kernel directory. These gizmos capture a timestamp upon -# occurrence of an intercept character and stuff it in the data -# stream for the clock driver to munch. To select this mode, -# postfix the driver name with the string CLK; that is, WWVB -# becomes WWVBCLK. If more than one clock is in use, the CLK -# postfix can be used with any or all of them. -# -# Alternatively, for the best accuracy, use the ppsclock streams -# module in the ./ppsclock directory to steal the carrier-detect -# transition and capture a precision timestamp. At present this -# works only with SunOS 4.1.1 or later. To select this mode, -# postfix the driver name with the string PPS; that is, AS2201 -# becomes AS2201PPS. If more than one clock is in use, the PPS -# postfix should be used with only one of them. If any PPS -# postfix is defined, the -DPPSPPS define should be used on the -# DEFS above. -# -# Define -DLOCAL_CLOCK for a local pseudo-clock to masquerade as a -# reference clock for those subnets without access to the real thing. -# Works in all systems and requires no hardware support. This is defined -# by default when using the "make makeconfig" script and greenhorn -# configuraiton. -# -# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver -# supports both the CLK and PPS modes. It should work in all systems -# with a serial port. -# -# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It -# should work in all systems with a serial port. The driver supports -# both the CLK and PPS modes if the requisite kernel support is installed. -# -# Define -DCHU for a special CHU receiver using an ordinary shortwave -# radio. This requires the chu_clk line discipline or chu_clk_STREAMS -# module in the ./kernel directory. At present, this driver works only -# on SunOS4.1.x; operation in other systems has not been confirmed. -# Construction details for a suitable modem can be found in the ./gadget -# directory. The driver supports # neither the CLK nor PPS modes. -# -# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance -# this requires a special parsestreams STREAMS (SunOS 4.x) module in the -# ./parse directory. Define -DPARSEPPS for PPS support via the -# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above. -# Define: -DCLOCK_MEINBERG for Meinberg clocks -# -DCLOCK_SCHMID for Schmid receivers -# -DCLOCK_DCF7000 for ELV DCF7000 -# -DCLOCK_RAWDCF for simple receivers (100/200ms pulses on Rx) -# -DCLOCK_TRIMSV6 for Trimble SV6 GPS receiver -# -# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this -# driver works only on SunOS4.1.x with CPU serial ports only. The PPS -# mode is required. -# -# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should -# work in all systems with a serial port. The driver does not support the -# CLK mode, but does support the PPS mode. If the radio is connected to -# more than one machine, the PPS mode is required. -# -# Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This -# driver is known to work with some other TrueTime products as well, -# including the GPS-DC GPS receiver. It should work in all systems with -# a serial port. The driver does not support the CLK mode, but does -# support the PPS mode. -# -# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It -# should work in all systems with a serial port. The driver does not -# support the CLK mode, but does support the PPS mode. -# -# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This -# requires the SunOS interface driver available from KSI. The driver -# supports neither the CLK nor PPS modes. -# -# Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for -# the HP 5061B Cesium Clock. It should work in all systems with a serial -# port. The driver does not support the CLK mode, but does support the -# PPS mode. -# -# Define -DMSFEESPPS for an EES M201 MSF receiver. It currently only works -# under SunOS 4.x with the PPSCD (ppsclock) STREAMS module, but the RCS -# files on cl.cam.ac.uk still has support for CLK and CBREAK modes. -# -# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of -# the Sun SPARCstations. This requires a modified BSD audio driver and -# exclusive access to the audio port. A memo describing how it works and -# how to install the driver is in the README.irig file in the ./doc -# directory. -# -# Note: The following defines result in compilation of all the above radio -# clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and -# ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes -# are removed and the IRIG, PARSE* and CLOCK* deleted, all of the rest compile -# under Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC -# OSF/1 Alpha. -# -CLOCKDEFS= -DLOCAL_CLOCK -DAS2201PPS -DCHUPPS -DGOES -DIRIG -DMX4200PPS -DOMEGA -DPSTCLK -DTPRO -DWWVBCLK -DLEITCH - -# -# Directory into which binaries should be installed (default /usr/local) -# -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.plain b/usr.sbin/xntpd/conf/Config.plain deleted file mode 100644 index 67dd70a..0000000 --- a/usr.sbin/xntpd/conf/Config.plain +++ /dev/null @@ -1,190 +0,0 @@ -# This is the local configure file (distribution version). -# You must modify it to fit your particular configuration -# and name it Config.local -# The following configuratiions can be auto-generated: -# -# make Config.local.green -# make a Config.local that supports a local clock -# (i.e. allow fallback to use of the CPU's own clock) -# make Config.local.NO.clock -# make a Config.local that supports no clocks -# -# -# NOTE TO GREENHORNS -# -# For plug-'n-play and no radios or other complicated gadgetry, -# use "make Config.local.green" as above. -# -# Following defines can be set in the DEFS_OPT= define: -# -# The flag -DDEBUG includes some debugging code. To use this, include -# the define and start the daemon with one or more -d flags, depending -# on your calibration of pearannoya. The daemon will not detach your -# terminal in this case. Judicious use of grep will reduce the speaker -# volume to bearable levels. -# -# To change the location of the configuration file, use a -# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar. -# -# The -DSYSLOG_FILE defines allows logging messages that are normally -# reported via syslof() in a file. The file name can be configured using -# the configuration line "logfile <filename>" in CONFIG_FILE. -# -# There are three serial port system software interfaces, each of -# which is peculiar to one or more Unix versions. Define -# -DHAVE_SYSV_TTYS for basic System V compatibility; define -DSTREAM -# for POSIX compatibility including System V Streams, and -# HAVE_BSD_TTYS for 4.3bsd compatibility. Only one of these three -# should be defined. If none are defined, HAVE_BSD_TTYS is assumed. -# Usually these defines are already set correctly. -# -DEFS_OPT=-DDEBUG - -# -# The DEFS_LOCAL define picks up all flags from DEFS_OPT (do not delete that) -# and one of the following: -# -# The flag -DREFCLOCK causes the basic reference clock support to be -# compiled into the daemon. If you set this you may also want to -# configure the particular clock drivers you want in the CLOCKDEFS= line -# below. This flag affects xntpd only. This define is included by -# default when using the "make makeconfig" script. -# -# The next two sets of defines are meaningful only when radio clock -# drivers or special 1-pps signals are to be used. For systems without -# these features, these delicious complexities can be avoided. Ordinarily, -# the "make makeconfig" script figures out which ones to use, but your -# mileage may vary. -# -# There are three ways to utilize external 1-pps signals. Define -# -DPPS to include just the pps routine, such as used by the DCF77(PARSE) -# clock driver. Define -DPPSCLK to include a serial device driver -# which avoids much of the jitter due to upper level port -# processing. This requires a dedicated serial port and either the -# tty_clock line discipline or tty_clk_streams module, both of -# which are in the ./kernel directory. Define -DPPSCD to include a -# special driver which intercepts carrier-detect transitions -# generated by the pps signal. This requires a nondedicated serial -# port and the ppsclock streams module in the ./kernel directory. -# Only one of these three flags should be defined. -# -# The flag KERNEL_PLL causes code to be compiled for a special feature of -# the kernel that (a) implements the phase-lock loop and (b) provides -# a user interface to learn time, maximum error and estimated error. -# See the file README.kern in the doc directory for further info. -# This code is activated only if the relevant kernel features have -# been configured; it does not affect operation of unmodified kernels. -# To compile it, however, requires a few header files from the -# special distribution. -# -# Note: following line must always start with DEFS_LOCAL= $(DEFS_OPT) -DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DKERNEL_PLL -DMCAST - -# -# Radio clock support definitions (these only make sense if -DREFCLOCK -# used), which is normally the case. Note that a configuration can include -# no clocks, more than one type of clock and even multiple clocks of the -# same type. -# -# For most radio clocks operating with serial ports, accuracy can -# be considerably improved through use of the tty_clk line -# discipline or tty_clk_STREAMS streams module found in the -# ./kernel directory. These gizmos capture a timestamp upon -# occurrence of an intercept character and stuff it in the data -# stream for the clock driver to munch. To select this mode, -# postfix the driver name with the string CLK; that is, WWVB -# becomes WWVBCLK. If more than one clock is in use, the CLK -# postfix can be used with any or all of them. -# -# Alternatively, for the best accuracy, use the ppsclock streams -# module in the ./ppsclock directory to steal the carrier-detect -# transition and capture a precision timestamp. At present this -# works only with SunOS 4.1.1 or later. To select this mode, -# postfix the driver name with the string PPS; that is, AS2201 -# becomes AS2201PPS. If more than one clock is in use, the PPS -# postfix should be used with only one of them. If any PPS -# postfix is defined, the -DPPSPPS define should be used on the -# DEFS above. -# -# Define -DLOCAL_CLOCK for a local pseudo-clock to masquerade as a -# reference clock for those subnets without access to the real thing. -# Works in all systems and requires no hardware support. This is defined -# by default when using the "make makeconfig" script and greenhorn -# configuraiton. -# -# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver -# supports both the CLK and PPS modes. It should work in all systems -# with a serial port. -# -# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It -# should work in all systems with a serial port. The driver supports -# both the CLK and PPS modes if the requisite kernel support is installed. -# -# Define -DCHU for a special CHU receiver using an ordinary shortwave -# radio. This requires the chu_clk line discipline or chu_clk_STREAMS -# module in the ./kernel directory. At present, this driver works only -# on SunOS4.1.x; operation in other systems has not been confirmed. -# Construction details for a suitable modem can be found in the ./gadget -# directory. The driver supports # neither the CLK nor PPS modes. -# -# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance -# this requires a special parsestreams STREAMS (SunOS 4.x) module in the -# ./parse directory. Define -DPARSEPPS for PPS support via the -# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above. -# Define: -DCLOCK_MEINBERG for Meinberg clocks -# -DCLOCK_SCHMID for Schmid receivers -# -DCLOCK_DCF7000 for ELV DCF7000 -# -DCLOCK_RAWDCF for simple receivers (100/200ms pulses on Rx) -# -DCLOCK_TRIMSV6 for Trimble SV6 GPS receiver -# -# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this -# driver works only on SunOS4.1.x with CPU serial ports only. The PPS -# mode is required. -# -# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should -# work in all systems with a serial port. The driver does not support the -# CLK mode, but does support the PPS mode. If the radio is connected to -# more than one machine, the PPS mode is required. -# -# Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This -# driver is known to work with some other TrueTime products as well, -# including the GPS-DC GPS receiver. It should work in all systems with -# a serial port. The driver does not support the CLK mode, but does -# support the PPS mode. -# -# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It -# should work in all systems with a serial port. The driver does not -# support the CLK mode, but does support the PPS mode. -# -# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This -# requires the SunOS interface driver available from KSI. The driver -# supports neither the CLK nor PPS modes. -# -# Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for -# the HP 5061B Cesium Clock. It should work in all systems with a serial -# port. The driver does not support the CLK mode, but does support the -# PPS mode. -# -# Define -DMSFEESPPS for an EES M201 MSF receiver. It currently only works -# under SunOS 4.x with the PPSCD (ppsclock) STREAMS module, but the RCS -# files on cl.cam.ac.uk still has support for CLK and CBREAK modes. -# -# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of -# the Sun SPARCstations. This requires a modified BSD audio driver and -# exclusive access to the audio port. A memo describing how it works and -# how to install the driver is in the README.irig file in the ./doc -# directory. -# -# Note: The following defines result in compilation of all the above radio -# clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and -# ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes -# are removed and the IRIG, PARSE* and CLOCK* deleted, all of the rest compile -# under Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC -# OSF/1 Alpha. -# -CLOCKDEFS= -DLOCAL_CLOCK -DCHU -DGOES -DOMEGA -DPST -DWWVB -DLEITCH - -# -# Directory into which binaries should be installed (default /usr/local) -# -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.solaris b/usr.sbin/xntpd/conf/Config.solaris deleted file mode 100644 index 5db3cd0..0000000 --- a/usr.sbin/xntpd/conf/Config.solaris +++ /dev/null @@ -1,7 +0,0 @@ -# -# Test suite for SunOS 5.x (no kernel mods, disciplines) -# -DEFS_OPT=-DDEBUG -DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DMCAST -CLOCKDEFS= -DACTS -DATOM -DAS2201 -DCHU -DDATUM -DGOES -DGPSTM -DHEATH -DIRIG -DLEITCH -DLOCAL_CLOCK -DMSFEES -DMX4200 -DNMEA -DOMEGA -DPST -DTPRO -DTRAK -DWWVB -BINDIR= /usr/local/bin diff --git a/usr.sbin/xntpd/conf/Config.svr4 b/usr.sbin/xntpd/conf/Config.svr4 deleted file mode 100644 index d6d0661..0000000 --- a/usr.sbin/xntpd/conf/Config.svr4 +++ /dev/null @@ -1,167 +0,0 @@ -# -# This is the local configure file. Modify it to fit your particular -# configuration. -# -# NOTE TO GREENHORNS -# -# For plug-'n-play and no radios or other complicated gadgetry, set the -# alternate defines as shown. -# -# The flag -DDEBUG includes some debugging code. To use this, include -# the define and start the daemon with one or more -d flags, depending -# on your calibration of pearannoya. The daemon will not detach your -# terminal in this case. Judicious use of grep will reduce the speaker -# volume to bearable levels. -# -# To change the location of the configuration file, use a -# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar. -# -# The flag -DREFCLOCK causes the basic reference clock support to be -# compiled into the daemon. If you set this you may also want to -# configure the particular clock drivers you want in the CLOCKDEFS= line -# below. This flag affects xntpd only. This define is included by -# default when using the "make makeconfig" script. -# -# The next two sets of defines are meaningful only when radio clock -# drivers or special 1-pps signals are to be used. For systems without -# these features, these delicious complexities can be avoided. Ordinarily, -# the "make makeconfig" script figures out which ones to use, but your -# mileage may vary. -# -# There are three ways to utilize external 1-pps signals. Define -# -DPPS to include just the pps routine, such as used by the DCF77 -# clock driver. Define -DPPSCLK to include a serial device driver -# which avoids much of the jitter due to upper level port -# processing. This requires a dedicated serial port and either the -# tty_clock line discipline or tty_clk_streams module, both of -# which are in the ./kernel directory. Define -DPPSCD to include a -# special driver which intercepts carrier-detect transitions -# generated by the pps signal. This requires a nondedicated serial -# port and the ppsclock streams module in the ./kernel directory. -# Only one of these three flags should be defined. -# -# There are three serial port system software interfaces, each of -# which is peculiar to one or more Unix versions. Define -# -DHAVE_SYSV_TTYS for basic System V compatibility; define -DSTREAM -# for POSIX compatibility including System V Streams, and -# HAVE_BSD_TTYS for 4.3bsd compatibility. Only one of these three -# should be defined. If none are defined, HAVE_BSD_TTYS is assumed. -# Ordinarily, the correct define is sniffed by the "make makeconfig" -# script and automatically included. -# -# The flag KERNEL_PLL is a temporary hack to use when the phase-lock loop -# is implmented in the kernel. Do not use unless you have modified -# kernel routines (see doc/README.kern). -# -#DEFS_LOCAL= -DDEBUG -DPPSPPS -DKERNEL_PLL -DEFS_LOCAL= -DDEBUG -#DEFS_LOCAL= # for greenhorns -# -# Radio clock support definitions (these only make sense if -DREFCLOCK -# used), which is normally the case. Note that a configuration can include -# no clocks, more than one type of clock and even multiple clocks of the -# same type. -# -# For most radio clocks operating with serial ports, accuracy can -# be considerably improved through use of the tty_clk line -# discipline or tty_clk_STREAMS streams module found in the -# ./kernel directory. These gizmos capture a timestamp upon -# occurrence of an intercept character and stuff it in the data -# stream for the clock driver to munch. To select this mode, -# postfix the driver name with the string CLK; that is, WWVB -# becomes WWVBCLK. If more than one clock is in use, the CLK -# postfix can be used with any or all of them. -# -# Alternatively, for the best accuracy, use the ppsclock streams -# module in the ./ppsclock directory to steal the carrier-detect -# transition and capture a precision timestamp. At present this -# works only with SunOS 4.1.1 or later. To select this mode, -# postfix the driver name with the string PPS; that is, AS2201 -# becomes AS2201PPS. If more than one clock is in use, the PPS -# postfix should be used with only one of them. If any PPS -# postfix is defined, the -DPPSPPS define should be used on the -# DEFS above. -# -# Define -DLOCAL_CLOCK for a local pseudo-clock to masquerade as a -# reference clock for those subnets without access to the real thing. -# Works in all systems and requires no hardware support. This is defined -# by default when using the "make makeconfig" script. -# -# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver -# supports both the CLK and PPS modes. It should work in all systems -# with a serial port. -# -# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It -# should work in all systems with a serial port. The driver supports -# both the CLK and PPS modes if the requisite kernel support is installed. -# -# Define -DCHU for a special CHU receiver using an ordinary shortwave -# radio. This requires the chu_clk line discipline or chu_clk_STREAMS -# module in the ./kernel directory. At present, this driver works only -# on SunOS4.1.x; operation in other systems has not been confirmed. -# Construction details for a suitable modem can be found in the ./gadget -# directory. The driver supports # neither the CLK nor PPS modes. -# -# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance -# this requires a special parsestreams STREAMS (SunOS 4.x) module in the -# ./kernel directory. Define -DPARSEPPS for PPS support via the -# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above. -# Define PARSESTREAM for utilising the STREAMS module for improved -# precision (currently only SunOS4.x) -# -# Define: -DCLOCK_MEINBERG for Meinberg clocks -# -DCLOCK_SCHMID for Schmid receivers -# -DCLOCK_DCF7000 for ELV DCF7000 -# -DCLOCK_RAWDCF for simple receivers (100/200ms pulses on Rx) -# -# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this -# driver works only on SunOS4.1.x with CPU serial ports only. The PPS -# mode is required. -# -# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should -# work in all systems with a serial port. The driver does not support the -# CLK mode, but does support the PPS mode. If the radio is connected to -# more than one machine, the PPS mode is required. -# -# Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This -# driver is known to work with some other TrueTime products as well, -# including the GPS-DC GPS receiver. It should work in all systems with -# a serial port. The driver does not support the CLK mode, but does -# support the PPS mode. -# -# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It -# should work in all systems with a serial port. The driver does not -# support the CLK mode, but does support the PPS mode. -# -# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This -# requires the SunOS interface driver available from KSI. The driver -# supports neither the CLK nor PPS modes. -# -# Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for -# the HP 5061B Cesium Clock. It should work in all systems with a serial -# port. The driver does not support the CLK mode, but does support the -# PPS mode. -# -# Define -DMSF for a EES M201 MSF receiver. It should work in all systems -# with a serial port. The driver does not support the CLK mode, but does -# support the # PPS mode. -# -# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of -# the Sun SPARCstations. This requires a modified BSD audio driver and -# exclusive access to the audio port. A memo describing how it works and -# how to install the driver is in the README.irig file in the ./doc -# directory. -# -# Note: The following defines result in compilation of all the above radio -# clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and -# ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes -# are removed and the IRIG deleted, all of the rest compile under -# Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC -# OSF/1 Alpha. -# -#CLOCKDEFS= -DAS2201PPS -DCHU -DGOES -DIRIG -DMX4200PPS -DOMEGA -DPST -DPSTCLK -DTPRO -DWWVBCLK -CLOCKDEFS= # for greenhorns -# -# Directory into which binaries should be installed -# -BINDIR= /usr/etc diff --git a/usr.sbin/xntpd/conf/README b/usr.sbin/xntpd/conf/README deleted file mode 100644 index 8d07591..0000000 --- a/usr.sbin/xntpd/conf/README +++ /dev/null @@ -1,11 +0,0 @@ -README file for directory ./conf of the NTP Version 3 distribution - -This directory contains example run-time configuration files for the -NTP Version 3 daemon xntpd. These files illustrate some of the more -obtuse configurations you may run into. They are not likely to do -anything good if run on machines other than their native spot, so don't -just blindly copy something and put it up. Additional information can -be found in the ./doc directory of the base directory. - -See the Config.local.dist file in the base directory for an explanation -of the defines used. diff --git a/usr.sbin/xntpd/conf/baldwin.conf b/usr.sbin/xntpd/conf/baldwin.conf deleted file mode 100644 index baaac95..0000000 --- a/usr.sbin/xntpd/conf/baldwin.conf +++ /dev/null @@ -1,40 +0,0 @@ -# -# NTP configuration file (ntp.conf) -# baldwin.udel.edu (128.4.1.24) -# -# This illustrates the use of an external clock with the local clock -# driver, as well as a multicast server. The prefer keyword on the -# local clock driver declares an external clock and that the time of -# this server should not be wiggled by an NTP peer, unless the -# external clock comes unstuck. Note the use of the multicast group -# ID assigned to NTP, 224.0.1.1, which identifies this as a multicast -# server rather than a broadcast one. The other NTP peers are known -# stratum-1 chimes intended as backup should the external clock croak. -# -peer 127.127.1.0 prefer # KSI/Odetics TPRO IRIG interface -fudge 127.127.1.0 stratum 0 refid GPS -broadcast 224.0.1.1 key 6 ttl 127 -peer 128.4.1.1 # rackety.udel.edu (Sun4c/40 IPC) -peer 128.4.1.4 # barnstable.udel.edu (Sun4c/65 SS1+) -peer 128.4.1.2 # mizbeaver.udel.edu (Bancomm bc700LAN) -peer 128.4.1.20 # pogo.udel.edu (Sun4c/65 SS1+) - -# -# Miscellaneous stuff -# -enable auth monitor # enable the good stuff -driftfile /etc/ntp.drift # path for drift file -statsdir /baldwin/ntpstats/ # directory for statistics files -filegen peerstats file peerstats type day enable -filegen loopstats file loopstats type day enable -filegen clockstats file clockstats type day enable - -# -# Authentication stuff -# -keys /usr/local/bin/ntp.keys # path for keys file -trustedkey 3 4 5 6 14 15 # define trusted keys -requestkey 15 # key (7) for accessing server variables -controlkey 15 # key (6) for accessing server variables -authdelay 0.000163 # authentication delay (SPARC4c/40 IPC MD5) - diff --git a/usr.sbin/xntpd/conf/dewey.conf b/usr.sbin/xntpd/conf/dewey.conf deleted file mode 100644 index 2a7548c..0000000 --- a/usr.sbin/xntpd/conf/dewey.conf +++ /dev/null @@ -1,46 +0,0 @@ -# -# NTP configuration file (ntp.conf) -# -# Generic configuration file for UDel NTP stratum-2 time servers. Don't -# forget each server should have a /etc/ntp.drift and /etc/ntp.keys file. -# -# Stratum-1 peers. Each server should chime two different stratum-1 -# servers from the following list. Each stratum-1 server should be used -# only once. -# -#peer 128.8.10.1 # umd1.umd.edu -#peer 18.72.0.3 version 2 # bitsy.mit.edu -peer 132.249.16.1 # fuzz.sdsc.edu -peer 128.118.46.3 version 2 # otc1.psu.edu -#peer 128.9.2.129 # wwvb.isi.edu -#peer 130.43.2.2 version 2 # apple.com -#peer 16.1.0.22 # clepsydra.dec.com -#peer 130.105.1.156 version 2 # clock.osf.orga -#peer 128.96.60.5 version 2 # pi.bellcore.com -#peer 128.4.1.1 # rackety.udel.edu -#peer 129.116.3.5 # shorty.chpc.utexas.edu -# -# Stratum-2 peers. Each server should chime all of the others in this -# list except itself. -# -peer 128.175.1.1 # huey.udel.edu (VAX) -#peer 128.175.1.2 # dewey.udel.edu (VAX) -peer 128.175.1.3 # louie.udel.edu (SPARC) -peer 128.175.2.15 # snow-white.ee.udel.edu (SPARC) -peer 128.175.7.4 # sol.cis.udel.edu (SPARC) -# -# Miscellaneous stuff -# -enable auth monitor # enable the good stuff -driftfile /etc/ntp.drift # path for drift file -# -# Authentication stuff. Note the different authentication delay on -# VAX and SPARC. -# -authenticate yes # enable authentication -keys /etc/ntp.keys # path for key file -trustedkey 1 2 15 # define trusted keys -requestkey 15 # key (7) for accessing server variables -controlkey 15 # key (6) for accessing server variables -authdelay 0.001501 # authentication delay (VAX) -#authdelay 0.000073 # authentication delay (SPARC) diff --git a/usr.sbin/xntpd/conf/grundoon.conf b/usr.sbin/xntpd/conf/grundoon.conf deleted file mode 100644 index 16003d5..0000000 --- a/usr.sbin/xntpd/conf/grundoon.conf +++ /dev/null @@ -1,157 +0,0 @@ -# -# NTP configuration file (ntp.conf) -# grundoon.udel.edu (128.4.2.7) -# -# This machine can best be described as the kitchen sink. It has, in -# addition to the baseboard tty ports ttya and ttyb, an 8-line -# Serial/Parallel Interface (SPIF) with ports ttyz00 through ttyz07. The -# configuration includes the following drivers, clock addresses and Unix -# device names. -# -# Local Clock 127.127.1.0 /dev/audio -# PST 1020 WWV/WWVH Receiver 127.127.3.1 /dev/pst1 -# Spectracom 8170 WWVB Receiver 127.127.4.1 /dev/wwvb1 -# IRIG Audio Decoder 127.127.6.0 /dev/audio -# Scratchbuilt CHU Receiver 127.127.7.1 /dev/chu1 -# NIST ACTS modem 127.127.18.1 /dev/acts1 -# Heath GC-1000 WWV Receiver 127.127.19.1 /dev/pst1 -# PPS Clock 127.127.22.1 none -# -# This machine has the kernel modifications described in the README.kern -# file, as well as the tty_clk, tty_chu and ppsclock streams modules. -# -# Spectracom 8170/Netclock-2 WWVB receiver. This receiver is equipped -# with a 1-pps and IRIG outputs. The 1-pps signal is connected via the -# ppsclock streams module and the carrier detect line of the CHU -# receiver below (ttyb). The IRIG signal is connected via an attenuator -# to the audio port (/dev/audio). The propagation delay computed from -# geographical coordinates is 8.8 ms, while the receiver delay -# calibrated at the factory is 17.3 ms, for a total delay of 26.1 ms. -# This is confirmed within 0.1 ms at the 1-pps signal output using a -# portable cesium clock. We add a fudge time1 of 3.5 ms so the driver -# time agrees with the 1-pps signal to within 1 ms. The fudge flag4 is -# set to cause the receiver to dump the quality table once each day to -# the clockstats file. - -# -#server 127.127.4.1 # /dev/wwvb1 -> /dev/ttyz03 -#fudge 127.127.4.1 time1 0.0035 flag4 1 -# -# IRIG Audio Decoder. The IRGI signal of the Spectracom WWVB receiver is -# connected to the audio codec via a resistor attenuator. We add a fudge -# time1 of 3.5 ms so the driver agrees with the calibrated 1-pps signal -# to within 0.1 ms. We also specify a reference ID of WWVB to indicate -# the signal origin. Note the prefer keyword in the server line, which -# favors this driver over all others that survive the clock selection -# algorithm. See README.refclock for further insight on this feature. -# -server 127.127.6.0 prefer # /dev/audio -fudge 127.127.6.0 time1 0.0005 refid WWVB - -# -# PST/Traconex 1020 WWV/WWVH Receier. The internal DIPswitches are set -# as near as possible to the delays to WWV (8.8 ms) and WWVH (28.1 ms), -# as computed from geographical coordinates. We add a fudge time1 of 5.9 -# ms so the driver time agrees with the 1-pps signal to within 1 ms for -# WWV. We also set the stratum to 1, so this receiver will not normally -# be selected, unless the primary WWVB receiver comes unstuck. -# -server 127.127.3.1 # /dev/pst1 -> ttyz05 -fudge 127.127.3.1 time1 0.0059 stratum 1 - -# -# Scratchbuilt CHU Receiver. The audio signal from a computer controlled -# CHU receiver is connected to a gadget box, which contains a 103A modem -# chip and level converter operating at 300 bps. The propagation delay -# computed from geographical coordinates is 3.0 ms, which is the value -# of the fudge time1 parameter. We add a fudge time2 of 9.9 ms so that -# the driver time agrees with the 1-pps signal to within a few ms, -# ordinarily the best possible with this receiver. The fudge flag3 is -# set because the 1-pps signal happens to be connected vit the carrier -# detect line on this port (ttyb). We also set the stratum to 1, so this -# receiver will not normally be selected, unless the primary WWVB -# receiver comes unstuck. -# -server 127.127.7.1 # /dev/chu1 -> /dev/ttyb -fudge 127.127.7.1 time1 0.0030 time2 0.0099 flag3 1 stratum 1 - -# -# NIST Automated Computer Time Service. This driver calls a special -# telephone number in Boulder, CO, to fetch the time directly from the -# NIST cesium farm. The details of the complicated calling program are -# in the README.refclock file. The Practical Peripherals 9600SA modem -# does not work correctly with the ACTS echo-delay scheme for -# automatically calculating the propagation delay, so the fudge flag2 is -# set to disable the feature. Instead, we add a fudge time1 of 65.0 ms -# so that the driver time agrees with th e1-pps signal to within 1 ms. -# The phone command specifies three alternate telephone numbers, -# including AT modem command prefix, which will be tried one after the -# other at each measurement attempt. In this case, a cron job is used to -# set fudge flag1, causing a measurement attempt, every six hours. -# -server 127.127.18.1 # /dev/acts1 -> /dev/ttyz00 -fudge 127.127.18.1 time1 0.0650 flag2 1 -phone atdt13034944774 atdt13034944785 atdt13034944774 - -# -# Heath GC-1000 Most Accurate Clock. This is a WWV receiver with a -# claimed accuracy better than 100 ms under "hi spec" conditions, but -# such conditions are not frequent. The propagation delay DIPswitchs are -# set to 9 ms, as close as possible to the 8.8 ms computed from -# geographical coordinates. We add a fudge time2 of 40.0 ms so that the -# driver time agrees with the 1-pps signal to within 50 ms, ordinarily -# the best possible with this receiver. We also set the stratum to 1, so -# this receiver will not normally be selected, unless the primary WWVB -# receiver comes unstuck. -# -server 127.127.19.1 # /dev/heath1 -> ttyz07 -fudge 127.127.19.1 time1 0.040 stratum 1 - -# -# Undisciplined Local Clock. This is a fake driver intended for backup -# and when no outside source of synchronized time is available. The -# default stratum is usually 3, but in this case we elect to use stratum -# 0. Since the server line does not have the prefer keyword, this driver -# is never used for synchronization, unless no other other -# synchronization source is available. In case the local host is -# controlled by some external source, such as an external oscillator or -# another protocol, the prefer keyword would cause the local host to -# disregard all other synchronization sources, unless the kernel -# modifications are in use and declare an unsynchronized condition. -# -server 127.127.1.0 # local clock -fudge 127.127.1.0 stratum 0 - -# -# PPS Clock. This driver is used to capture a 1-pps signal when the PPS -# kernel modifications are not in use. It can be configured for the -# tty_clk or ppsclock streams module or no module at all, assuming the -# RS232 connector is properly wired. Normally, the 1-pps signal is -# generated by a radio clock, in this cast the Spectracom clock -# 127.127.4.1 also configured for this host. When used this way, the -# associated radio clock normally has the prefer keyword in the serve -# command line. The PPS driver then will be selected only if the prefer -# peer is operating within nominal error bounds. See the README.refclock -# file for further details. -# -#server 127.127.22.1 # pps clock - -# -# Miscellaneous stuff. We enable authentication in order to prevent -# -enable auth monitor # enable the good stuff -driftfile /etc/ntp.drift # path for drift file -statsdir /grundoon/ntpstats/ # directory for statistics files -filegen peerstats file peerstats type day enable -filegen loopstats file loopstats type day enable -filegen clockstats file clockstats type day enable - -# -# Authentication stuff -# -keys /usr/local/ntp.keys # path for keys file -trustedkey 1 2 3 4 5 6 14 15 # define trusted keys -requestkey 15 # key (7) for accessing server variables -controlkey 15 # key (6) for accessing server variables -authdelay 0.000163 # authentication delay (SPARC4c/40 IPC MD5) - diff --git a/usr.sbin/xntpd/conf/maccarony.conf b/usr.sbin/xntpd/conf/maccarony.conf deleted file mode 100644 index 6bd25c7..0000000 --- a/usr.sbin/xntpd/conf/maccarony.conf +++ /dev/null @@ -1,33 +0,0 @@ -# -# NTP configuration file (ntp.conf) -# -# This illustrates a multicast client. All that is really needed -# here is the multicastclient command and the authentication stuff. -# If the monitoring option and filgen statistics were not needed, -# this could be done without a configuration file by including the -# following snip in the rc.local startup file or equivalent: -# -#if [ -f /usr/local/bin/xntpd ]; then -# /usr/local/bin/xntpd -m -a -k/usr/local/bin/ntp.keys -t3 -#fi -# -multicastclient # listen on default 224.0.1.1 -# -# Miscellaneous stuff -# -enable auth monitor # enable the good stuff -driftfile /etc/ntp.drift # path for drift file -statsdir /malarky/ntpstats/ # directory for statistics files -filegen peerstats file peerstats type day enable -filegen loopstats file loopstats type day enable -filegen clockstats file clockstats type day enable - -# -# Authentication stuff -# -keys /usr/local/bin/ntp.keys # path for key file -trustedkey 3 4 5 6 14 15 # define trusted keys -requestkey 15 # key (7) for accessing server variables -controlkey 15 # key (6) for accessing server variables -authdelay 0.000094 # authentication delay (Sun4c/50 IPX MD5) - diff --git a/usr.sbin/xntpd/conf/malarky.conf b/usr.sbin/xntpd/conf/malarky.conf deleted file mode 100644 index 9b1d7b2..0000000 --- a/usr.sbin/xntpd/conf/malarky.conf +++ /dev/null @@ -1,27 +0,0 @@ -# -# NTP configuration file (ntp.conf) -# -# This is for a broadcast/multicast client. Except for the statistics -# stuff, this can be done with only a commmand line of the form -# -# /usr/local/bin/xntpd -a -k /usr/local/bin/ntp.keys -m -t 3 -# -multicastclient # listen on default 224.0.1.1 -# -# Miscellaneous stuff -# -enable auth monitor # enable the good stuff -driftfile /etc/ntp.drift # path for drift file -statsdir /malarky/ntpstats/ # directory for statistics files -filegen peerstats file peerstats type day enable -filegen loopstats file loopstats type day enable -filegen clockstats file clockstats type day enable - -# -# Authentication stuff -# -keys /usr/local/bin/ntp.keys # path for key file -trustedkey 3 4 5 6 14 # define trusted keys -requestkey 14 # key (7) for accessing server variables -controlkey 14 # key (6) for accessing server variables -authdelay 0.000094 # authentication delay (Sun4c/50 IPX MD5) diff --git a/usr.sbin/xntpd/conf/ntp.conf.dcf77 b/usr.sbin/xntpd/conf/ntp.conf.dcf77 deleted file mode 100644 index 678d719..0000000 --- a/usr.sbin/xntpd/conf/ntp.conf.dcf77 +++ /dev/null @@ -1,19 +0,0 @@ -# -# XNTP configuration file (/etc/ntp.conf) -# - -# -# Server is a Boeder DCF77 receiver -# -# Use: -# 127.127.8.40 for /dev/refclock-0 (/dev/ttyd0) -# 127.127.8.41 for /dev/refclock-1 (/dev/ttyd1) -# 127.127.8.42 for /dev/refclock-2 (/dev/ttyd2) -# 127.127.8.43 for /dev/refclock-3 (/dev/ttyd3) -# -server 127.127.8.40 - -# -# drift file -# -driftfile /etc/ntp.drift diff --git a/usr.sbin/xntpd/conf/ntp.conf.gw b/usr.sbin/xntpd/conf/ntp.conf.gw deleted file mode 100644 index bd56878..0000000 --- a/usr.sbin/xntpd/conf/ntp.conf.gw +++ /dev/null @@ -1,34 +0,0 @@ -# -# peers for gw.ccie.utoronto.ca (128.100.63.2, 128.100.49.104, 128.100.224.224) -# -peer 128.4.0.1 key 1 # dcn1.udel.edu -peer 128.8.10.1 key 2 # umd1.umd.edu -peer 128.116.64.3 key 3 # ncarfuzz.ucar.edu -peer 128.9.2.129 key 4 # wwvb.isi.edu -#peer 128.4.0.6 key 1 # dcn6.udel.edu -# -# Don't configure associations with the other secondaries. This is -# the only one in a machine room and will hold itself pretty stable -# when all else fails -# -monitor yes # keep track of traffic - -# -# drift file -# -driftfile /etc/ntp.drift - -# -# authentication stuff. We're running authenticated, tell it -# where the keys are and which to trust. -# -authenticate yes -authdelay 0.000323 # seconds, about right for an RT model 125 -trustedkey 1 2 3 4 21 22 23 24 -keys /etc/ntp.keys - -# -# allow run time reconfiguration using key 65535 -# -requestkey 65535 -controlkey 65535 diff --git a/usr.sbin/xntpd/conf/ntp.conf.ipl b/usr.sbin/xntpd/conf/ntp.conf.ipl deleted file mode 100644 index 1fd5b7d..0000000 --- a/usr.sbin/xntpd/conf/ntp.conf.ipl +++ /dev/null @@ -1,32 +0,0 @@ -# -# peers for ipl.utcs.utoronto.ca (128.100.102.7) -# -peer 128.4.0.5 key 1 # dcn5.udel.edu -peer 128.8.10.1 key 2 # umd1.umd.edu -peer 192.12.207.1 key 3 # fuzz.sdsc.edu -peer 128.9.2.129 key 4 # wwvb.isi.edu -peer 128.100.63.2 key 21 # gw.ccie -peer 128.100.49.105 key 22 # suzuki.ccie -peer 128.100.102.4 key 23 # shiningtree.utcs -# -monitor yes # keep track of traffic - -# -# drift file -# -driftfile /etc/ntp.drift - -# -# authentication stuff. We're running authenticated, tell it -# where the keys are and which to trust. -# -authenticate yes -authdelay 0.000323 # seconds, about right for an RT model 125 -trustedkey 1 2 3 4 21 22 23 -keys /etc/ntp.keys - -# -# allow run time reconfiguration using key 65535 -# -requestkey 65535 -controlkey 65535 diff --git a/usr.sbin/xntpd/conf/ntp.conf.nsf b/usr.sbin/xntpd/conf/ntp.conf.nsf deleted file mode 100644 index 298bb7a..0000000 --- a/usr.sbin/xntpd/conf/ntp.conf.nsf +++ /dev/null @@ -1,156 +0,0 @@ -# -# Maybe an alternate xntpd configuration for NSS#17 -# - -# -# precision is supported, but you don't really need it. The code -# will determine a precision from the kernel's value of _hz which -# is fine. Note you shouldn't claim too good a precision on a -# Unix machine even if the clock carries a lot of bits, since -# precision also depends on things like I/O delays and scheduling -# latencies, which Unix machines control poorly. If you claim better -# than -6 or -7 it will make the anti-hop aperture tighter than is -# reasonable for a Unix machine. -# -#precision -7 - -# -# peers are ncarfuzz.ucar.edu umd1.umd.edu dcn5.udel.edu fuzz.sdsc.edu -# syntax is peer addr [ key 1-15 ] [ version 1_or_2 ] -# - -peer 128.116.64.3 # ncarfuzz.ucar.edu -peer 128.8.10.1 # umd1.umd.edu -peer 128.4.0.5 # dcn5.udel.edu -peer 192.12.207.1 # fuzz.sdsc.edu - -# -# Drift file. Put this in a directory which the daemon can write to. -# No symbolic links allowed, either, since the daemon updates the file -# by creating a temporary in the same directory and then rename()'ing -# it to the file. -# -# This is a nice feature. Once you've got the drift computed it hardly -# ever takes more than an hour or so to resync after a restart. -# -driftfile /etc/ntp.drift - -# -# The server statement causes polling to be done in client mode rather -# than symmetric active. It is an alternative to the peer command -# above. Which you use depends on what you want to achieve. Usually -# it doesn't matter. Syntax is: -# -#server 128.100.49.1 key 4 version 1 - -# -# The broadcast statement tells it to start broadcasting time out one -# of its interfaces. Syntax is -# -#broadcast 128.100.49.255 # [ key n ] [ version n ] - -# -# broadcastclient tells the daemon whether it should attempt to sync -# to broadcasts or not. Defaults to `no'. -# -#broadcastclient yes # or no - -# -# broadcastdelay configures in a default round-trip delay to use for -# broadcast time. It may poll to improve this estimate. -# -#broadcastdelay 0.0095 # in seconds - -# -# authenticate configures us into strict authentication mode (or not). -# -#authenticate yes # or no. Default is no - -# -# authdelay is the time it takes to do an NTP encryption on this host. -# The current routine is pretty fast. -# -#authdelay 0.000340 # in seconds - -# -# trustedkey are used when authenticate is on. We only trust (and sync to) -# peers who know these keys. -# -#trustedkey 1 3 4 8 - -# -# monitor turns on the monitoring facility. See xntpdc's monlist command. -# This shows a lot of neat stuff, but I'm not fussy about the implementation. -# Uses up to 20Kb of memory at run time. You could try this. -# -#monitor yes # or no. Default is no - -# -# keys points at the file which holds the authentication keys. -# -#keys /etc/ntp.keys - -# -# requestkey indicates which key is to be used for validating -# runtime reconfiguration requests. If this isn't defined, or the -# key isn't in the keys file, you can't do runtime reconfiguration. -# controlkey indicates which key is to be used for validating -# mode 6 write variables commands. If this isn't defined you can't -# do it. The only thing the latter is used for is to set leap second -# warnings on machines with radio clocks. -# -#requestkey 65535 -#controlkey 65534 - -# -# restrict places restrictions on the punters. This is implemented as -# a sorted address-and-mask list, with each entry including a set of -# flags which define what a host matching the entry *can't* do (the sort -# also saves CPU time searching the table since it needn't be searched -# to the end). The last match in the table defines what the host does. -# The default entry, which everyone matches, is first, most specific -# matches are later in the table. The flags are: -# -# ignore - ignore all traffic from host -# noserve - don't give host any time (but let him make queries?) -# notrust - give host time, let him make queries, but don't sync to him -# noquery - host can have time, but not make queries -# nomodify - allow the host to make queries except those which are -# actually run-time configuration commands. -# notrap - don't allow matching hosts to set traps. If noquery is -# set this isn't needed -# lowpriotrap - if this guy sets a trap make it easy to delete -# ntpport - a different kind of flag. Makes matches for this entry -# possible only if the source port is 123. -# -# To understand this better, take a look at xntpdc's reslist command when the -# server is running. This usually prints in the sorted order. -# -# This should match the NSS 17 stuff. Default mask is all ones. - -restrict default ignore # ignore almost everyone - -# -# These guys can be served time and make non-modifying queries -# -restrict 129.140.0.0 mask 255.255.0.0 notrust nomodify -restrict 35.1.1.42 notrust nomodify - -# -# Rest of 35.1.1 gets to look but not touch -# -restrict 35.1.1.0 mask 255.255.255.0 noserve nomodify - -# -# modifications can be made from local NSS only -# -restrict 129.140.17.0 mask 255.255.255.0 notrust -restrict 127.0.0.1 notrust - -# -# take time from the following peers, but don't let them peek or modify -# -restrict 128.116.64.3 noquery -restrict 128.8.10.1 noquery -restrict 128.4.0.5 noquery -restrict 192.12.207.1 noquery diff --git a/usr.sbin/xntpd/conf/ntp.conf.shiningtree b/usr.sbin/xntpd/conf/ntp.conf.shiningtree deleted file mode 100644 index 1576ebb..0000000 --- a/usr.sbin/xntpd/conf/ntp.conf.shiningtree +++ /dev/null @@ -1,32 +0,0 @@ -# -# peers for shiningtree.utcs.utoronto.ca (128.100.102.4) -# -peer 128.4.0.1 key 1 # dcn1.udel.edu -peer 130.126.174.40 key 2 # truechimer.cso.uiuc.edu -peer 192.12.207.1 key 3 # fuzz.sdsc.edu -peer 128.116.64.3 key 4 # ncarfuzz.ucar.edu -peer 128.100.63.2 key 21 # gw.ccie -peer 128.100.49.105 key 22 # suzuki.ccie -peer 128.100.102.7 key 23 # ipl.utcs -# -monitor yes # keep track of traffic - -# -# drift file -# -driftfile /etc/ntp.drift - -# -# authentication stuff. We're running authenticated, tell it -# where the keys are and which to trust. -# -authenticate yes -authdelay 0.000323 # seconds, about right for an RT model 125 -trustedkey 1 2 3 4 21 22 23 -keys /etc/ntp.keys - -# -# allow run time reconfiguration using key 65535 -# -requestkey 65535 -controlkey 65535 diff --git a/usr.sbin/xntpd/conf/ntp.conf.suzuki b/usr.sbin/xntpd/conf/ntp.conf.suzuki deleted file mode 100644 index ee32e7a..0000000 --- a/usr.sbin/xntpd/conf/ntp.conf.suzuki +++ /dev/null @@ -1,43 +0,0 @@ -# -# peers for suzuki.ccie.utoronto.ca (128.100.49.105, 128.100.224.225) -# - -# -# the reference clock, /dev/chu1 -# -server 127.127.7.1 key 4 -# Propagation delay 2.5 ms, sloppy clock flag on -fudge 127.127.7.1 time1 0.0025 flag1 1 - -peer 128.4.0.5 key 1 # dcn5.udel.edu -peer 128.8.10.1 key 2 # umd1.umd.edu -peer 128.116.64.34 key 3 # ncarfuzz.ucar.edu -peer 130.126.174.40 key 4 # truechimer.cso.uiuc.edu -peer 128.100.49.104 key 24 # gw.ccie -peer 128.100.102.4 key 22 # shiningtree.utcs -peer 128.100.102.7 key 22 # ipl.utcs - -peer 128.4.0.6 key 1 # dcn6.udel.edu - -# -monitor yes # keep track of traffic - -# -# drift file -# -driftfile /etc/ntp.drift - -# -# authentication stuff. We're running authenticated, tell it -# where the keys are and which to trust. -# -authenticate yes -authdelay 0.000323 # seconds, about right for an RT model 125 -trustedkey 1 2 3 4 21 22 23 24 -keys /etc/ntp.keys - -# -# allow run time reconfiguration using key 65535 -# -requestkey 65535 -controlkey 65535 diff --git a/usr.sbin/xntpd/conf/pogo.conf b/usr.sbin/xntpd/conf/pogo.conf deleted file mode 100644 index e557e44..0000000 --- a/usr.sbin/xntpd/conf/pogo.conf +++ /dev/null @@ -1,34 +0,0 @@ -# -# NTP configuration file (ntp.conf) -# pogo.udel.edu (128.4.1.20) -# -server 127.127.10.1 prefer # austron 2201A gps receiver -peer 128.4.1.1 # rackety.udel.edu (Sun4c/40 IPC) -peer 128.4.1.2 # mizbeaver.udel.edu (Bancomm bc700LAN) -peer 128.4.1.4 # barnstable.udel.edu (Sun4c/65 SS1+) -peer 128.4.1.5 maxpoll 8 # churchy.udel.edu (cisco IGS router) -peer 132.163.135.130 maxpoll 8 # time_A.timefreq.bldrdoc.gov (Cesium) -peer 131.188.1.40 maxpoll 8 # ntps1-0.uni-erlangen.de (DCF77) -peer 129.132.2.21 maxpoll 8 # swisstime.ethz.ch (DCF77) -peer 130.155.98.13 maxpoll 8 # terss.ml.csiro.au (Cesium) -peer 192.36.143.150 maxpoll 8 # Time1.Stupi.SE (Cesium) - -# -# Miscellaneous stuff -# -enable auth monitor # enable the good stuff -precision -18 # clock reading precision (usec) -driftfile /etc/ntp.drift # path for drift file -statsdir /pogo/ntpstats/ # directory for statistics files -filegen peerstats file peerstats type day enable -filegen loopstats file loopstats type day enable -filegen clockstats file clockstats type day enable - -# -# Authentication stuff -# -keys /usr/local/bin/ntp.keys # path for keys file -trustedkey 3 4 5 6 14 # define trusted keys -requestkey 15 # key (7) for accessing server variables -controlkey 15 # key (6) for accessing server variables -authdelay 0.000159 # authentication delay (SPARC4c/65 SS1+ MD5) diff --git a/usr.sbin/xntpd/conf/rackety.conf b/usr.sbin/xntpd/conf/rackety.conf deleted file mode 100644 index 48389dc..0000000 --- a/usr.sbin/xntpd/conf/rackety.conf +++ /dev/null @@ -1,69 +0,0 @@ -# -# NTP configuration file (ntp.conf) -# rackety (128.4.1.1) -# -server 127.127.10.1 prefer # austron 2201A gps receiver -fudge 127.127.10.1 flag4 1 # enable statistics -server 127.127.4.1 # spectracom 8170/netclock-2 wwvb receiver -# propagation delay: wwvb 0.0088, receiver delay 0.0173, os delay .0035 -fudge 127.127.4.1 time1 0.0035 stratum 1 flag4 1 - -# -# ee vaxen -# -peer 128.175.1.1 # huey.udel.edu -peer 128.175.1.2 # louie.udel.edu -peer 128.175.1.3 # dewey.udel.edu - -# -# munchkins (stratum-1 only) -# -broadcast 224.0.1.1 key 5 ttl 127 # multicast -broadcast 128.4.1.0 key 3 # local broadcast -peer 128.4.1.2 # mizbeaver.udel.edu -peer 128.4.1.4 # barnstable.udel.edu -peer 128.4.1.20 # pogo.udel.edu - -# -# dartnet -# -peer 140.173.112.2 # ames.dart.net -peer 140.173.128.1 # la.dart.net -peer 140.173.64.1 # dc.dart.net -peer 140.173.144.2 # parc.dart.net -peer 140.173.80.1 # sri.dart.net -peer 140.173.96.1 # lbl.dart.net -peer 140.173.128.2 # isi.dart.net -peer 140.173.16.1 # udel.dart.net -peer 140.173.32.1 # bbn.dart.net -peer 140.173.48.2 # mit.dart.net - -# -# nsfnet t3 backbone -# -server 140.222.134.1 version 2 # enss134 (cambridge - mit) -server 140.222.135.1 version 2 # enss135 (san diego - sdsc) -peer 140.222.136.1 version 2 # enss136 (college park - sura) -server 140.222.141.1 version 2 # enss141 (boulder - ncar) -server 140.222.144.1 version 2 # enss144 (sunnyvale - nasa ames) - -# -# Miscellaneous stuff -# -enable auth monitor # enable the good stuff -precision -18 # clock reading precision (usec) -driftfile /etc/ntp.drift # path for drift file -statsdir /rackety/ntpstats/ # directory for statistics files -filegen peerstats file peerstats type day enable -filegen loopstats file loopstats type day enable -filegen clockstats file clockstats type day enable - -# -# Authentication stuff -# -keys /usr/local/bin/ntp.keys # path for keys file -trustedkey 3 4 5 6 14 # define trusted keys -requestkey 14 # key (7) for accessing server variables -controlkey 14 # key (6) for accessing server variables -authdelay 0.000163 # authentication delay (SPARC4c/40 IPC MD5) - diff --git a/usr.sbin/xntpd/conf/snow-white.conf b/usr.sbin/xntpd/conf/snow-white.conf deleted file mode 100644 index a86cb4b..0000000 --- a/usr.sbin/xntpd/conf/snow-white.conf +++ /dev/null @@ -1,33 +0,0 @@ -# -# NTP configuration file (ntp.conf) -# snow-white.udel.edu (128.175.2.15) -# -# Stratum-2 peers -# -peer 128.175.1.1 # huey.udel.edu -peer 128.175.1.2 # dewey.udel.edu -#peer 128.175.1.3 # louie.udel.edu -peer 128.175.2.33 # louie.udel.edu -#peer 128.175.7.39 # louie.udel.edu -# -# Stratum-3 peers -# -peer 128.175.7.4 # sol.cis.udel.edu -peer 128.175.7.18 # ra.cis.udel.edu -#peer 128.175.2.15 # snow-white.ee.udel.edu -peer 128.175.2.21 # opus.ee.udel.edu -# -# Miscellaneous stuff -# -monitor yes # enable monitoring -precision -18 # clock reading precision (1 usec) -driftfile /etc/ntp.drift # path for drift file -# -# Authentication stuff -# -authenticate yes # enable authentication -keys /etc/ntp.keys # path for key file -trustedkey 1 2 15 # define trusted keys -requestkey 15 # key (7) for accessing server variables -controlkey 15 # key (6) for accessing server variables -authdelay 0.000077 # authentication delay (SPARC IPC) |
