diff options
author | ru <ru@FreeBSD.org> | 2005-06-27 06:40:43 +0000 |
---|---|---|
committer | ru <ru@FreeBSD.org> | 2005-06-27 06:40:43 +0000 |
commit | 6ff738eb1b2f522ff23fc8f006190af135f3f869 (patch) | |
tree | d5b87269ee5c6bc4b279ccd40c5badaf3fc6b108 /usr.sbin/wpa/wpa_supplicant | |
parent | 64582f399573df6ad83482e88df55d66b94b8fdb (diff) | |
download | FreeBSD-src-6ff738eb1b2f522ff23fc8f006190af135f3f869.zip FreeBSD-src-6ff738eb1b2f522ff23fc8f006190af135f3f869.tar.gz |
Tidy up the markup (fixing some nearby content bugs).
Timeout from: sam
Approved by: re (blanket manpages)
Diffstat (limited to 'usr.sbin/wpa/wpa_supplicant')
-rw-r--r-- | usr.sbin/wpa/wpa_supplicant/wpa_supplicant.8 | 58 | ||||
-rw-r--r-- | usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5 | 387 |
2 files changed, 267 insertions, 178 deletions
diff --git a/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.8 b/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.8 index 4164ed2..228a176 100644 --- a/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.8 +++ b/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.8 @@ -32,31 +32,35 @@ .Nd "WPA/802.11i Supplicant for wireless network devices" .Sh SYNOPSIS .Nm -.Op Fl BddehLqqvw +.Op Fl BdehLqvw .Fl i Ar ifname .Fl c Ar config-file -.Op Fl N i Ar ifname Fl c Ar config-file .... +.Op Fl N i Ar ifname Fl c Ar config-file ... .Sh DESCRIPTION +The .Nm +utility is an implementation of the WPA Supplicant component, i.e., the part that runs in the client stations. -.Nm -implements WPA key negotiation with a WPA Authenticator +It implements WPA key negotiation with a WPA Authenticator and EAP authentication with an Authentication Server. -In addition, +In addition, .Nm controls the roaming and IEEE 802.11 authentication/association support of the .Xr wlan 4 -module and can be used to configure static WEP keys +module and can be used to configure static WEP keys based on identified networks. .Pp +The .Nm -is designed to be a "daemon" program that runs in the +utility +is designed to be a +.Dq daemon +program that runs in the background and acts as the backend component controlling the wireless connection. -.Nm -supports separate frontend programs such as the +It supports separate frontend programs such as the text-based .Xr wpa_cli 8 program. @@ -66,26 +70,27 @@ The following arguments must be specified on the command line: .It Fl i Ar ifname Use the specified wireless interface. .It Fl c Ar config-file -Use the settings in the specified configuration file when managing +Use the settings in the specified configuration file when managing the wireless interface. -See +See .Xr wpa_supplicant.conf 5 for a description of the configuration file syntax and contents. .Pp -Changes to the configuration file can be reloaded by sending a -.Nm SIGHUP +Changes to the configuration file can be reloaded by sending a +.Dv SIGHUP to the .Nm process or with the -.Nm wpa_cli -utility, using ``wpa_cli reconfigure''. +.Xr wpa_cli 8 +utility, using +.Dq Li "wpa_cli reconfigure" . .El .Sh OPTIONS The following options are available: .Bl -tag -width indent .It Fl d Enable debugging messages. -If this option is supplied twice more verbose messages are displayed. +If this option is supplied twice, more verbose messages are displayed. .It Fl e Use an external IEEE 802.1X Supplicant program and disable the internal Supplicant. @@ -93,15 +98,15 @@ This option is not normally used. .It Fl h Show help text. .It Fl q -Decrease debugging verbosity (i.e. counteract the use of the +Decrease debugging verbosity (i.e., counteract the use of the .Fl d -flag. +flag). .It Fl v Display version information on the terminal and exit. .It Fl w If the specified interface is not present, wait for it to be -added; e.g. a cardbus device to be inserted. -This option is not normally used; instead +added; e.g.\& a cardbus device to be inserted. +This option is not normally used; instead, .Xr devd 8 should be configured to launch .Nm @@ -113,7 +118,7 @@ in the background. Include key information in debugging output. .It Fl L Display the license for this program on the terminal and exit. -.It Fl N Fl i Ar iface Fl Ar config-file +.It Fl N i Ar ifname Fl c Ar config-file ... Specify an additional interface and configuration file. If multiple interfaces are specified then .Nm @@ -121,16 +126,16 @@ will manage them all with a single process. .El .Sh SEE ALSO .Xr ath 4 , -.Xr iwi 4 , .Xr ipw 4 , +.Xr iwi 4 , .Xr ral 4 , .Xr ural 4 , .Xr wi 4 , .Xr wlan 4 , .Xr wpa_supplicant.conf 5 , .Xr devd 8 , -.Xr wpa_cli 8 , -.Xr ifconfig 8 . +.Xr ifconfig 8 , +.Xr wpa_cli 8 .Sh HISTORY The .Nm @@ -141,7 +146,8 @@ The .Nm utility was written by .An Jouni Malinen Aq jkmaline@cc.hut.fi . -This manual page is derived from the README file included in the +This manual page is derived from the +.Pa README +file included in the .Nm distribution. -.Sh BUGS diff --git a/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5 b/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5 index 52a639d..b30e838 100644 --- a/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5 +++ b/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5 @@ -29,318 +29,398 @@ .Os .Sh NAME .Nm wpa_supplicant.conf -.Nd "configuration file for wpa_supplicant utility" +.Nd configuration file for +.Xr wpa_supplicant 8 .Sh DESCRIPTION The -.Xr wpa_supplicant 1 -program is an implementation of the WPA Supplicant component, +.Xr wpa_supplicant 8 +utility is an implementation of the WPA Supplicant component, i.e., the part that runs in the client stations. -.Nm wpa_supplicant -implements WPA key negotiation with a WPA Authenticator +It implements WPA key negotiation with a WPA Authenticator and EAP authentication with Authentication Server using configuration information stored in a text file. .Pp The configuration file consists of optional global parameter -settings and one or more network blocks, e.g. +settings and one or more network blocks, e.g.\& one for each used SSID. -.Nm wpa_supplicant +The +.Xr wpa_supplicant 8 +utility will automatically select the best network based on the order of the network blocks in the configuration file, network security level (WPA/WPA2 is preferred), and signal strength. -Comments are indicated with the ``#'' character; all text to the +Comments are indicated with the +.Ql # +character; all text to the end of the line will be ignored. .Sh GLOBAL PARAMETERS -.Nm wpa_supplicant's -default parameters may be overridden by specifying -.Bd -literal -parameter=value -.Ed +Default parameters used by +.Xr wpa_supplicant 8 +may be overridden by specifying +.Pp +.Dl parameter=value .Pp in the configuration file (note no spaces are allowed). -Values with embedded spaces must enclosed in quote marks. +Values with embedded spaces must be enclosed in quote marks. .Pp The following parameters are recognized: .Bl -tag -width indent -.It ctrl_interface +.It Va ctrl_interface The pathname of the directory in which -.Nm wpa_supplicant -creates UNIX domain socket files for communication +.Xr wpa_supplicant 8 +creates +.Ux +domain socket files for communication with frontend programs such as .Xr wpa_cli 8 . -.It ctrl_interface_group +.It Va ctrl_interface_group A group name or group ID to use in setting protection on the control interface file. This can be set to allow non-root users to access the control interface files. -If no group is specified the group ID of the control interface +If no group is specified, the group ID of the control interface is not modified and will, typically, be the group ID of the directory in which the socket is created. -.It eapol_version +.It Va eapol_version The IEEE 802.1x/EAPOL protocol version to use; either 1 (default) or 2. -.Nm wpa_supplicant +The +.Xr wpa_supplicant 8 +utility is implemented according to IEEE 802-1X-REV-d8 which defines EAPOL version to be 2. -However some access points do not work when presented with +However, some access points do not work when presented with this version so by default -.Nm wpa_supplicant +.Xr wpa_supplicant 8 will announce that it is using EAPOL version 1. If version 2 must be announced for correct operation with an -access point this value may be set to 2. -.It ap_scan +access point, this value may be set to 2. +.It Va ap_scan Access point scanning and selection control; one of 0, 1 (default), or 2. Only setting 1 should be used with the .Xr wlan 4 module; the other settings are for use on other operating systems. -.It fast_reauth +.It Va fast_reauth EAP fast re-authentication; either 1 (default) or 0. Control fast re-authentication support in EAP methods that support it. .El .Sh NETWORK BLOCKS -Each potential network/access point should have a ``network block'' -that describes how to identify it and how to setup security. -When multiple network blocks are listed in a configuration file +Each potential network/access point should have a +.Dq "network block" +that describes how to identify it and how to set up security. +When multiple network blocks are listed in a configuration file, the highest priority one is selected for use or, if multiple networks with the same priority are identified, the first one listed in the configuration file is used. .Pp A network block description is of the form: -.Bd -literal +.Bd -literal -offset indent network={ parameter=value ... } .Ed .Pp -(note the leading "network={" may have no spaces). +(note the leading +.Qq Li "network={" +may have no spaces). The block specification contains one or more parameters from the following list: .Bl -tag -width indent -.It ssid (required) +.It Va ssid No (required) Network name (as announced by the access point). -An ASCII or hex string enclosed in quotation marks. -.It scan_ssid +An +.Tn ASCII +or hex string enclosed in quotation marks. +.It Va scan_ssid SSID scan technique; 0 (default) or 1. Technique 0 scans for the SSID using a broadcast Probe Request frame while 1 uses a directed Probe Request frame. Access points that cloak themself by not braodcasting their SSID require technique 1, but beware that this scheme can cause scanning to take longer to complete. -.It bssid +.It Va bssid Network BSSID (typically the MAC address of the access point). -.It priority +.It Va priority The priority of a network when selecting among multiple networks; a higher value means a network is more desirable. By default networks have priority 0. When multiple networks with the same priority are considered -for selection other information such as security policy and +for selection, other information such as security policy and signal strength are used to select one. -.It mode +.It Va mode IEEE 802.11 operation mode; either 0 (infrastructure, default) or 1 (IBSS). Note that IBSS (adhoc) mode can only be used with -key_mgmt +.Va key_mgmt set to -NONE (plaintext and static WEP). -.It proto +.Li NONE +(plaintext and static WEP). +.It Va proto List of acceptable protocols; one or more of: -WPA (IEEE 802.11i/D3.0) +.Li WPA +(IEEE 802.11i/D3.0) and -RSN (IEEE 802.11i). -WPA2 is another name for RSN. -If not set this defaults to "WPA RSN". -.It key_mgmt +.Li RSN +(IEEE 802.11i). +.Li WPA2 +is another name for +.Li RSN . +If not set this defaults to +.Qq Li "WPA RSN" . +.It Va key_mgmt List of acceptable key management protocols; one or more of: -WPA-PSK (WPA pre-shared key), -WPA-EAP (WPA using EAP authentication), -IEEE8021X (IEEE 802.1x using EAP authentication and, +.Li WPA-PSK +(WPA pre-shared key), +.Li WPA-EAP +(WPA using EAP authentication), +.Li IEEE8021X +(IEEE 802.1x using EAP authentication and, optionally, dynamically generated WEP keys), -NONE (plaintext or static WEP keys). -If not set this defaults to "WPA-PSK WPA-EAP". -.It auth_alg +.Li NONE +(plaintext or static WEP keys). +If not set this defaults to +.Qq Li "WPA-PSK WPA-EAP" . +.It Va auth_alg List of allowed IEEE 802.11 authentication algorithms; one or more of: -OPEN (Open System authentication, required for WPA/WPA2), -SHARED (Shared Key authentication), -LEAP (LEAP/Network EAP). +.Li OPEN +(Open System authentication, required for WPA/WPA2), +.Li SHARED +(Shared Key authentication), +.Li LEAP +(LEAP/Network EAP). If not set automatic selection is used (Open System with LEAP enabled if LEAP is allowed as one of the EAP methods). -.It pairwise +.It Va pairwise List of acceptable pairwise (unicast) ciphers for WPA; one or more of: -CCMP (AES in Counter mode with CBC-MAC, RFC 3610, IEEE 802.11i/D7.0), -TKIP (Temporal Key Integrity Protocol, IEE 802.11i/D7.0), -NONE (deprecated). -If not set this defaults to "CCMP TKIP". -.It group +.Li CCMP +(AES in Counter mode with CBC-MAC, RFC 3610, IEEE 802.11i/D7.0), +.Li TKIP +(Temporal Key Integrity Protocol, IEE 802.11i/D7.0), +.Li NONE +(deprecated). +If not set this defaults to +.Qq Li "CCMP TKIP" . +.It Va group List of acceptable group (multicast) ciphers for WPA; one or more of: -CCMP (AES in Counter mode with CBC-MAC, RFC 3610, IEEE 802.11i/D7.0), -TKIP (Temporal Key Integrity Protocol, IEE 802.11i/D7.0), -WEP104 (WEP with 104-bit key), -WEP40 (WEP with 40-bit key). -If not set this defaults to "CCMP TKIP WEP104 WEP40". -.It psk +.Li CCMP +(AES in Counter mode with CBC-MAC, RFC 3610, IEEE 802.11i/D7.0), +.Li TKIP +(Temporal Key Integrity Protocol, IEE 802.11i/D7.0), +.Li WEP104 +(WEP with 104-bit key), +.Li WEP40 +(WEP with 40-bit key). +If not set this defaults to +.Qq Li "CCMP TKIP WEP104 WEP40" . +.It Va psk WPA preshared key used in WPA-PSK mode. The key is specified as 64 hex digits or as -an 8-63 character ASCII passphrase. -ASCII passphrases are converted to a 256-bit key using the network SSID. -.It eapol_flags +an 8-63 character +.Tn ASCII +passphrase. +.Tn ASCII +passphrases are converted to a 256-bit key using the network SSID. +.It Va eapol_flags Dynamic WEP key usage for non-WPA mode, specified as a bit field. Bit 0 (1) forces dynamically generated unicast WEP keys to be used. Bit 1 (2) forces dynamically generated broadcast WEP keys to be used. By default this is set to 3 (use both). -.It eap +.It Va eap List of acceptable EAP methods; one or more of: -MD5 (EAP-MD5, cannot be used with WPA, used only as a Phase 2 method with EAP-PEAP or EAP-TTLS)), -MSCHAPV2 (EAP-MSCHAPV2, cannot be used with WPA; used only as a Phase 2 method with EAP-PEAP or EAP-TTLS), -OTP (EAP-OTP, cannot be used with WPA; used only as a Phase 2 metod with EAP-PEAP or EAP-TTLS), -GTC (EAP-GTC, cannot be used with WPA; used only as a Phase 2 metod with EAP-PEAP or EAP-TTLS), -TLS (EAP-TLS, client and server certificate), -PEAP (EAP-PEAP, with tunnelled EAP authentication), -TTLS (EAP-TTLS, with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 authentication). +.Li MD5 +(EAP-MD5, cannot be used with WPA, +used only as a Phase 2 method with EAP-PEAP or EAP-TTLS), +.Li MSCHAPV2 +(EAP-MSCHAPV2, cannot be used with WPA; +used only as a Phase 2 method with EAP-PEAP or EAP-TTLS), +.Li OTP +(EAP-OTP, cannot be used with WPA; +used only as a Phase 2 metod with EAP-PEAP or EAP-TTLS), +.Li GTC +(EAP-GTC, cannot be used with WPA; +used only as a Phase 2 metod with EAP-PEAP or EAP-TTLS), +.Li TLS +(EAP-TLS, client and server certificate), +.Li PEAP +(EAP-PEAP, with tunnelled EAP authentication), +.Li TTLS +(EAP-TTLS, with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 authentication). If not set this defaults to all available methods compiled in to -.Nm wpa_supplicant . +.Xr wpa_supplicant 8 . Note that by default -.Nm wpa_supplicant +.Xr wpa_supplicant 8 is not compiled with EAP support; see -.Xr make.conf 5 +.Xr make.conf 5 for the -ENABLE_WPA_SUPPLICANT_EAPOL +.Va ENABLE_WPA_SUPPLICANT_EAPOL configuration variable. -.It identity +.It Va identity Identity string for EAP. -.It anonymous_identity +.It Va anonymous_identity Anonymous identity string for EAP (to be used as the unencrypted identity -with EAP types that support different tunnnelled identity; e.g. EAP-TTLS). -.It password +with EAP types that support different tunnnelled identity; e.g.\& EAP-TTLS). +.It Va password Password string for EAP. -.It ca_cert +.It Va ca_cert Pathname to CA certificate file. This file can have one or more trusted CA certificates. If -ca_cert +.Va ca_cert is not included, server certificates will not be verified (not recommended). -.It client_cert +.It Va client_cert Pathname to client certificate file (PEM/DER). -.It private_key +.It Va private_key Pathname to a client private key file (PEM/DER/PFX). When a PKCS#12/PFX file is used, then -client_cert +.Va client_cert should not be specified as both the private key and certificate will be read from PKCS#12 file. -.It private_key_passwd +.It Va private_key_passwd Password for any private key file. -.It dh_file +.It Va dh_file Pathname to a file holding DH/DSA parameters (in PEM format). This file holds parameters for an ephemeral DH key exchange. In most cases, the default RSA authentication does not use this configuration. -However, it is possible to setup RSA to use an ephemeral DH key exchange. +However, it is possible to set up RSA to use an ephemeral DH key exchange. In addition, ciphers with DSA keys always use ephemeral DH keys. This can be used to achieve forward secrecy. If the -dh_file +.Va dh_file is in DSA parameters format, it will be automatically converted into DH params. -.It subject_match +.It Va subject_match Substring to be matched against the subject of the authentication server certificate. If this string is set, the server sertificate is only accepted if it contains this string in the subject. The subject string is in following format: -.Bd -literal -/C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com -.Ed -.It phase1 -Phase1 (outer authentication, i.e., TLS tunnel) parameters -(string with field-value pairs, e.g., "peapver=0" or "peapver=1 peaplabel=1"). -.Pp -peapver can be used to force which PEAP version (0 or 1) is used. .Pp -peaplabel=1 can be used to force new label, "client PEAP encryption", +.Dl "/C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com" +.It Va phase1 +Phase1 (outer authentication, i.e., TLS tunnel) parameters +(string with field-value pairs, e.g., +.Qq Li peapver=0 +or +.Qq Li "peapver=1 peaplabel=1" ) . +.Bl -inset +.It Li peapver +can be used to force which PEAP version (0 or 1) is used. +.It Li peaplabel=1 +can be used to force new label, +.Dq "client PEAP encryption" , to be used during key derivation when PEAPv1 or newer. -Most existing PEAPv1 implementation seem to be using the old label, -"client EAP encryption", and wpa_supplicant is now using that as the +Most existing PEAPv1 implementations seem to be using the old label, +.Dq Li "client EAP encryption" , +and +.Xr wpa_supplicant 8 +is now using that as the default value. -Some servers, e.g., Radiator, may require peaplabel=1 configuration to -interoperate with PEAPv1; see eap_testing.txt for more details. -.Pp -peap_outer_success=0 can be used to terminate PEAP authentication on +Some servers, e.g., +.Tn Radiator , +may require +.Li peaplabel=1 +configuration to interoperate with PEAPv1; see +.Pa eap_testing.txt +for more details. +.It Li peap_outer_success=0 +can be used to terminate PEAP authentication on tunneled EAP-Success. This is required with some RADIUS servers that -implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., -Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) -include_tls_length=1 can be used to force wpa_supplicant to include +implement +.Pa draft-josefsson-pppext-eap-tls-eap-05.txt +(e.g., +.Tn Lucent NavisRadius v4.4.0 +with PEAP in +.Dq "IETF Draft 5" +mode). +.It Li include_tls_length=1 +can be used to force +.Xr wpa_supplicant 8 +to include TLS Message Length field in all TLS messages even if they are not fragmented. -.Pp -sim_min_num_chal=3 can be used to configure EAP-SIM to require three +.It Li sim_min_num_chal=3 +can be used to configure EAP-SIM to require three challenges (by default, it accepts 2 or 3) -.Pp -fast_provisioning=1 option enables in-line provisioning of EAP-FAST +.It Li fast_provisioning=1 +option enables in-line provisioning of EAP-FAST credentials (PAC). -.It phase2 +.El +.It Va phase2 phase2: Phase2 (inner authentication with TLS tunnel) parameters -(string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or -"autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS). -.It ca_cert2 +(string with field-value pairs, e.g., +.Qq Li "auth=MSCHAPV2" +for EAP-PEAP or +.Qq Li "autheap=MSCHAPV2 autheap=MD5" +for EAP-TTLS). +.It Va ca_cert2 Like -.Nm ca_cert +.Va ca_cert but for EAP inner Phase 2. -.It client_cert2 +.It Va client_cert2 Like -.Nm client_cert +.Va client_cert but for EAP inner Phase 2. -.It private_key2 +.It Va private_key2 Like -.Nm private_key +.Va private_key but for EAP inner Phase 2. -.It private_key2_passwd +.It Va private_key2_passwd Like -.Nm private_key_passwd +.Va private_key_passwd but for EAP inner Phase 2. -.It dh_file2 +.It Va dh_file2 Like -.Nm dh_file +.Va dh_file but for EAP inner Phase 2. -.It subject_match2 +.It Va subject_match2 Like -.Nm subject_match +.Va subject_match but for EAP inner Phase 2. -.It eappsk +.It Va eappsk 16-byte pre-shared key in hext format for use with EAP-PSK. -.It nai +.It Va nai User NAI for use with EAP-PSK. -.It server_nai +.It Va server_nai Authentication Server NAI for use with EAP-PSK. -.It pac_file +.It Va pac_file Pathname to the file to use for PAC entries with EAP-FAST. -.Nm wpa_supplicant +The +.Xr wpa_supplicant 8 +utility must be able to create this file and write updates to it when PAC is being provisioned or refreshed. -.It eap_workaround +.It Va eap_workaround Enable/disable EAP workarounds for various interoperability issues with misbehaving authentication servers. By default these workarounds are enabled. String EAP conformance can be configured by setting this to 0. .El .Sh CERTIFICATES -.Pp Some EAP authentication methods require use of certificates. EAP-TLS uses both server- and client-side certificates, whereas EAP-PEAP and EAP-TTLS only require a server-side certificate. When a client certificate is used, a matching private key file must also be included in configuration. If the private key uses a passphrase, this -has to be configured in the wpa_supplicant.conf file as "private_key_passwd". +has to be configured in the +.Nm +file as +.Va private_key_passwd . .Pp -.Nm wpa_supplicant +The +.Xr wpa_supplicant 8 +utility supports X.509 certificates in PEM and DER formats. User certificate and private key can be included in the same file. .Pp If the user certificate and private key is received in PKCS#12/PFX -format, they need to be converted to suitable PEM/DER format for +format, they need to be converted to a suitable PEM/DER format for use by -.Nm wpa_supplicant. +.Xr wpa_supplicant 8 . This can be done using the .Xr openssl 1 -program, e.g. with following commands: +program, e.g.\& with the following commands: .Bd -literal # convert client certificate and private key to PEM format openssl pkcs12 -in example.pfx -out user.pem -clcerts @@ -348,7 +428,6 @@ openssl pkcs12 -in example.pfx -out user.pem -clcerts openssl pkcs12 -in example.pfx -out ca.pem -cacerts -nokeys .Ed .Sh EXAMPLES -.Pp WPA-Personal (PSK) as a home network and WPA-Enterprise with EAP-TLS as a work network: .Bd -literal @@ -399,7 +478,8 @@ network={ .Ed .Pp EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the -unencrypted use. Real identity is sent only within an encrypted TLS tunnel. +unencrypted use. +Real identity is sent only within an encrypted TLS tunnel. .Bd -literal ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel @@ -416,18 +496,21 @@ network={ } .Ed .Sh SEE ALSO -.Xr wpa_supplicant 8 , -.Xr wpa_cli 8 . +.Xr wpa_cli 8 , +.Xr wpa_supplicant 8 .Sh HISTORY The .Nm manual page and -.Nm wpa_supplicant +.Xr wpa_supplicant 8 functionality first appeared in .Fx 6.0 . .Sh AUTHORS -This manual page is derived from the README and wpa_supplicant.conf +This manual page is derived from the +.Pa README +and +.Pa wpa_supplicant.conf files in the .Nm wpa_supplicant distribution provided by -.An Jouni Malinen Aq jkmaline@cc.hut.fi . +.An Jouni Malinen Aq jkmaline@cc.hut.fi . |