This commit was generated by cvs2svn to compensate for changes in r13122,

which included commits to RCS files with non-trunk default branches.

1 files changed, 0 insertions, 286 deletions

diff --git a/usr.sbin/ncrcontrol/ncrcontrol.1 b/usr.sbin/ncrcontrol/ncrcontrol.1
deleted file mode 100644
index 11505f0..0000000
--- a/usr.sbin/ncrcontrol/ncrcontrol.1
+++ /dev/null
@@ -1,286 +0,0 @@
-.\" Copyright (c) 1994 Wolfgang Stanglmeier.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. The name of the author may not be used to endorse or promote products
-.\"    derived from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\"     $Id: ncrcontrol.8,v 1.1 94/10/09 21:25:51 wolf Exp $
-.\"
-.Dd September 16, 1994
-.Dt NCRCONTROL 8
-.Os FreeBSD
-.Sh NAME
-.Nm ncrcontrol
-.Nd manually configure the ncr810/825 PCI/SCSI device driver
-.Sh SYNOPSIS
-.\"--------------------------------------------------------
-.\"  ncrcontrol [-Mcore] [-Nsystem] [-u unit] [-v] [-v] -i
-.\"--------------------------------------------------------
-.Nm ncrcontrol
-.Op Fl M Ar core
-.Op Fl N Ar system
-.Op Fl u Ar unit
-.Op Fl v
-.Op Fl v
-.Fl i
-.\"--------------------------------------------------------
-.\"  ncrcontrol [-N system] [-u unit] [-p wait]
-.\"--------------------------------------------------------
-.Nm ncrcontrol
-.Op Fl N Ar system
-.Op Fl u Ar unit
-.Op Fl p Ar wait
-.\"------------------------------------------------------------
-.\"  ncrcontrol [-Nsystem] [-u unit] [-t target] -s name=value
-.\"------------------------------------------------------------
-.Nm ncrcontrol
-.Op Fl N Ar system
-.Op Fl u Ar unit
-.Op Fl t Ar target
-.Fl s
-.Ar name=value
-.\"------------------------------------------------------------
-.\"  ncrcontrol [-Mcore] [-Nsystem] [-u unit] [-t target] -d pattern
-.\"------------------------------------------------------------
-.Nm ncrcontrol
-.Op Fl M Ar core
-.Op Fl N Ar system
-.Op Fl u Ar unit
-.Op Fl t Ar target
-.Fl d
-.Ar debug
-.\"------------------------------------------------------------
-.\"  ncrcontrol [-Nsystem] [-u unit] -w -k torture
-.\"------------------------------------------------------------
-.Nm ncrcontrol
-.Op Fl N Ar system
-.Op Fl u Ar unit
-.Fl w
-.Fl k
-.Ar torture
-.\"
-.\"=====================================================================
-.\"
-.Sh DESCRIPTION
-The
-.Nm ncrcontrol
-command symbolically displays the contents of the ncr810/ncr825
-pci/scsi driver control structure.
-There are a number of output formats,
-depending on the options for the information presented.
-It may be used to set some values, too.
-
-.\"--------------------------------------------------------
-.\"  ncrcontrol [-Mcore] [-Nsystem] [-u unit] [-v] [-v] -i
-.\"--------------------------------------------------------
-The first form of the command displays an overview of the
-connected targets. The
-.Fl v
-requests a verbose output.
-
-.\"--------------------------------------------------------
-.\"  ncrcontrol [-N system] [-u unit] [-p wait]
-.\"--------------------------------------------------------
-Using the second form, with a
-.Ar wait
-interval specified,
-.Nm ncrcontrol
-will continuously display the information regarding data
-traffic on the selected scsi bus.
-
-.\"------------------------------------------------------------
-.\"  ncrcontrol [-Nsystem] [-u unit] [-t target] -s name=value
-.\"------------------------------------------------------------
-The third form sets a configuration value for one or all
-targets of a selected scsi bus.
-It normally is not needed, if the device driver options are
-correctly set in kernel configuration.
-
-.\"------------------------------------------------------------
-.\"  ncrcontrol [-M core] [-N system] [-u unit] [-t target] -w -d pattern
-.\"------------------------------------------------------------
-The forth form presents the content of the drivers control
-structure. By the
-.Ar pattern
-certain parts of the output can be enabled/disabled.
-It's only used to debug the driver.
-
-.\"------------------------------------------------------------
-.\"  ncrcontrol [-N system] [-u unit] -w -k torture
-.\"------------------------------------------------------------
-With the last form certain driver problems can be forced.
-THIS MAY CRASH YOUR SYSTEM.
-It's only used to debug the driver.
-
-.\"
-.\"=====================================================================
-.\"
-.Pp
-The options have the following meaning:
-.Bl -tag -width flag
-.\"------------------------------------------------------------
-.\"  -d pattern
-.\"------------------------------------------------------------
-.It Fl d
-Show the content of the drivers control structure.
-The
-.Ar pattern
-selects the fields, which are displayed. With
-.Fl d?
-you can get a list of valid flags.
-
-.\"------------------------------------------------------------
-.\"  -i
-.\"------------------------------------------------------------
-.It Fl i
-Show the configuration state of the connected targets.
-With the
-.Fl v
-option you can request a more verbose information.
-
-.\"------------------------------------------------------------
-.\"  -k torture
-.\"------------------------------------------------------------
-.It Fl k
-Force certain driver problems to check the error recovery
-functions. This option should only be used by the developers.
-With
-.Fl k?
-you can get a list of possible tortures.
-This option requires the
-.Fl w
-option to be set.
-
-.\"------------------------------------------------------------
-.\"  -M core
-.\"------------------------------------------------------------
-.It Fl M
-Extract values associated with the name list from the specified core
-instead of the default
-.Pa /dev/kmem .
-.\"------------------------------------------------------------
-.\"  -N system
-.\"------------------------------------------------------------
-.It Fl N
-Extract the name list from the specified system instead of the default
-.Pa /386bsd .
-
-.\"------------------------------------------------------------
-.\"  -p wait
-.\"------------------------------------------------------------
-When
-.Nm ncrcontrol
-is invoked with a
-.Ar wait
-interval argument, it displays a running count of statistics related to
-the transfers on the selected scsi bus.
-
-This display consists of the number of transfers and number of transferred
-byted for the controller and for each connected target.
-
-(NOT YET COMPLETE)
-
-.\"------------------------------------------------------------
-.\"  -s field=value
-.\"------------------------------------------------------------
-.It Fl s
-Set a configuration value for one or more targets.
-One ore more targets can be selected by the
-.Fl t
-option. If no target is selected, then the field is set
-for all connect targets.
-
-(NOT YET COMPLETE)
-
-.\"------------------------------------------------------------
-.\"  -t target
-.\"------------------------------------------------------------
-.It Fl t
-Select the target for the
-.Fl s
-option. This option may be given more than one time.
-
-.\"------------------------------------------------------------
-.\"  -u unit
-.\"------------------------------------------------------------
-.It Fl u
-Select the controller unit.
-If this option is not given, then controller 0 is assumed.
-Most systems have only one controller.
-
-.\"------------------------------------------------------------
-.\"  -v
-.\"------------------------------------------------------------
-.It Fl v
-Enable verbose output for the
-.Fl i
-option.
-
-.\"------------------------------------------------------------
-.\"  -w
-.\"------------------------------------------------------------
-.It Fl w
-Wizard option.
-Enable the usage of the
-.Fl k
-option.
-
-.\"
-.\"=====================================================================
-.\"
-.Pp
-(NOT YET COMPLETE)
-
-.\"
-.\"=====================================================================
-.\"
-.Sh SEE ALSO
-.Xr scsi 5
-
-.\"
-.\"=====================================================================
-.\"
-.Sh HISTORY
-The
-.Nm ncrcontrol
-command was hacked for
-.Bx 386
-and ported to version 1.1 of
-.Bx Free
-by Wolfgang Stanglmeier <wolf@dentaro.GUN.de>.
-It was ported to
-.Bx Net
-by Charles M. Hannum <mycroft@gnu.ai.mit.edu>
-and to version 2.0 of
-.Bx Free
-by Stefan Esser <se@zpr.Uni-Koeln.DE>.
-
-.\"
-.\"=====================================================================
-.\"
-.Sh BUGS
-The
-.Nm ncrcontrol
-was hacked as a debugging tool for the ncr810 driver.
-It should be deleted sometimes.
-There should be a general tool to change device driver options
-on the fly.
-The statistical data should be gathered by the generic scsi driver.