Remove the old Makefile based nanobsd build method, the new shell script

based is far better and the only one supported from now on.

10 files changed, 0 insertions, 600 deletions

diff --git a/tools/tools/nanobsd/Customize/NET4801 b/tools/tools/nanobsd/Customize/NET4801
deleted file mode 100644
index 8715f7f..0000000
--- a/tools/tools/nanobsd/Customize/NET4801
+++ /dev/null
@@ -1,27 +0,0 @@
-#! /bin/sh
-#
-# Customize a nanoBSD flash image for Soekris NET4801
-#
-# Copyright (c) 2004 Poul-Henning Kamp
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-# 
-# Usage:
-#
-# ${CUSTOMIZE} ${WD} ${WORLDDIR} ${.CURDIR} [ ${LOCAL_FILES_LIST} ]
-
-
-WD=$1
-WORLDDIR=$2
-CURDIR=$3
-LOCAL_FILES_LIST=$4
-
-# Older NET4801s do not have the necessary wires on the PCB to run DMA
-# mode against the CF card.  Disable ata_dma so we can boot.
-
-touch ${WD}/boot/loader.conf
-sed -i "" -e '/hw.ata.ata_dma/d' ${WD}/boot/loader.conf
-echo 'hw.ata.ata_dma="0"' >> ${WD}/boot/loader.conf
-
diff --git a/tools/tools/nanobsd/Customize/comconsole b/tools/tools/nanobsd/Customize/comconsole
deleted file mode 100644
index 5fcfae7..0000000
--- a/tools/tools/nanobsd/Customize/comconsole
+++ /dev/null
@@ -1,30 +0,0 @@
-#! /bin/sh
-#
-# Customize a nanoBSD flash image for serial console
-#
-# Copyright (c) 2004 Poul-Henning Kamp
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-# 
-# Usage:
-#
-# ${CUSTOMIZE} ${WD} ${WORLDDIR} ${.CURDIR} [ ${LOCAL_FILES_LIST} ]
-
-WD=$1
-WORLDDIR=$2
-CURDIR=$3
-LOCAL_FILES_LIST=$4
-
-PKG_DBDIR=${WD}/var/db/pkg
-export PKG_DBDIR
-
-# Enable getty on console
-sed -i "" -e /ttyd0/s/off/on/ ${WD}/etc/ttys
-
-# Disable getty on syscons devices
-sed -i "" -e '/^ttyv[0-8]/s/	on/	off/' ${WD}/etc/ttys
-
-# Tell loader to use serial console early.
-echo " -h" > ${WD}/boot.config
diff --git a/tools/tools/nanobsd/Customize/default b/tools/tools/nanobsd/Customize/default
deleted file mode 100644
index c017f95..0000000
--- a/tools/tools/nanobsd/Customize/default
+++ /dev/null
@@ -1,64 +0,0 @@
-#! /bin/sh
-#
-# Customize a nanoBSD flash image
-#
-# Copyright (c) 2004 Thomas Quinot
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-# 
-# Usage:
-#
-# ${CUSTOMIZE} ${WD} ${WORLDDIR} ${.CURDIR} [ ${LOCAL_FILES_LIST} ]
-
-WD=$1
-WORLDDIR=$2
-CURDIR=$3
-LOCAL_FILES_LIST=$4
-
-PKG_DBDIR=${WD}/var/db/pkg
-export PKG_DBDIR
-
-add_CURDIR() {
-  case "$1" in
-    /*) echo "$1" ;;
-    *)  echo "${CURDIR}/$1" ;;
-  esac
-}
-
-pkg_relocate() {
-  sed -e "1,/^@cwd/s#^@cwd #&${WD}#"
-}
-
-installlocalfiles() {
-  if [ -n "${LOCAL_FILES_LIST}" ]; then
-    while read src dest;
-    do
-      case "x${src}" in
-        x#*|x)
-          ;;
-        x@*)
-          eval "for pkg in `add_CURDIR \"\`echo ${src} | sed 's/^@//'\`\"`;
-                do pkg_add -M \${pkg} | pkg_relocate | pkg_add -S;
-                done"
-          ;;
-        *)
-          dest="${dest:-${src}}"
-          mkdir -p ${WD}/`dirname "${dest}x"`
-          eval cp -fp `add_CURDIR ${src}` "${WD}/${dest}"
-          ;;
-      esac
-    done < ${LOCAL_FILES_LIST}
-  fi
-}
-
-movelocaletc() {
-  if [ ! -d ${WD}/etc/local -a -d ${WD}/usr/local/etc ]; then
-    mv ${WD}/usr/local/etc ${WD}/etc/local
-    ln -s ../../etc/local ${WD}/usr/local/etc
-  fi
-}
-
-installlocalfiles
-movelocaletc
diff --git a/tools/tools/nanobsd/Customize/files b/tools/tools/nanobsd/Customize/files
deleted file mode 100644
index 3393eef..0000000
--- a/tools/tools/nanobsd/Customize/files
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-#
-# Install whatever files are in ${.CURDIR}/Files
-#
-# Copyright (c) 2004 Poul-Henning Kamp
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-#
-# Usage:
-# ${CUSTOMIZE} ${WD} ${WORLDDIR} ${.CURDIR} [ ${LOCAL_FILES_LIST} ]
-
-cd $3/Files
-find . ! -path \*/CVS\* -print | cpio -dumpv $1
diff --git a/tools/tools/nanobsd/Customize/nobeastie b/tools/tools/nanobsd/Customize/nobeastie
deleted file mode 100644
index 4e8d1e1..0000000
--- a/tools/tools/nanobsd/Customize/nobeastie
+++ /dev/null
@@ -1,25 +0,0 @@
-#! /bin/sh
-#
-# Customize a nanoBSD flash image to disable the loaders ascii-art beastie
-#
-# Copyright (c) 2004 Poul-Henning Kamp
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-# 
-# Usage:
-#
-# ${CUSTOMIZE} ${WD} ${WORLDDIR} ${.CURDIR} [ ${LOCAL_FILES_LIST} ]
-
-WD=$1
-WORLDDIR=$2
-CURDIR=$3
-LOCAL_FILES_LIST=$4
-
-PKG_DBDIR=${WD}/var/db/pkg
-export PKG_DBDIR
-
-touch ${WD}/boot/loader.conf
-sed -i "" -e '/beastie_disable/d' ${WD}/boot/loader.conf
-echo 'beastie_disable="YES"' >> ${WD}/boot/loader.conf
diff --git a/tools/tools/nanobsd/Customize/pkgs b/tools/tools/nanobsd/Customize/pkgs
deleted file mode 100644
index d63ee65..0000000
--- a/tools/tools/nanobsd/Customize/pkgs
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# Install whatever packages are in ${.CURDIR}/Pkg
-#
-# Copyright (c) 2004 Poul-Henning Kamp
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-#
-# Usage:
-# ${CUSTOMIZE} ${WD} ${WORLDDIR} ${.CURDIR} [ ${LOCAL_FILES_LIST} ]
-
-rm -rf $1/tmp/Pkg $1/var/db/pkg/* $1/usr/local/*
-mkdir $1/tmp/Pkg
-ln $3/Pkg/* $1/tmp/Pkg
-( chroot $1 sh -c "cd /tmp/Pkg && pkg_add -v *" )
-rm -rf $1/tmp/Pkg
diff --git a/tools/tools/nanobsd/Makefile b/tools/tools/nanobsd/Makefile
deleted file mode 100644
index 573a46d..0000000
--- a/tools/tools/nanobsd/Makefile
+++ /dev/null
@@ -1,191 +0,0 @@
-# Copyright (c) 2003-2004 Poul-Henning Kamp.
-# Copyright (c) 2004      Thomas Quinot.
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-
-MAKE_CONF?=	${.CURDIR}/make.conf
-
-.include "${MAKE_CONF}"
-
-# parallism flag for make.
-MAKEJ?="-j3"
-
-.if defined(WITH_GEOM_VOL)
-# Do not hardcode device names, use FFS volume labels instead.
-# Requires 'options GEOM_VOL' in kernel.
-PRIROOTSLICE=	vol/sysflash1
-ALTROOTSLICE=	vol/sysflash2
-CFGSLICE=	vol/cfgflash
-.else
-# Some CF cards behave as slaves, (eg Lexar) and are assigned ad1.
-DEVICE?=	ad0
-PRIROOTSLICE=	${DEVICE}s1a
-ALTROOTSLICE=	${DEVICE}s2a
-CFGSLICE=	${DEVICE}s3
-.endif
-
-# Physical disk paramters.  Use diskinfo(8) on the target platform
-# to find the correct numbers.  We assume 512 bytes sectors.
-HD?=16
-SC?=32
-SECTS?=501760
-
-# Number of sectors in the data slice (ad0s3).  The rest of the disk
-# will be split evenly between the two image slices (ad0s1/ad0s2)
-DATASIZE?=10240
-
-# You probably do not need to change these.
-WORLDDIR?= ${.CURDIR}/../../..
-WD?=	${.OBJDIR}/_.w
-
-# Set this to the name of a script if you want to customize the
-# contents of the image filesystems.
-#CUSTOMIZE?=		${.CURDIR}/somescript.sh
-#CUSTOMIZE_ARGS?=	some_arguments
-
-# Set this to the name of a directory used to populate the
-# configuration slice.
-#CFGMASTER?=	${.CURDIR}/cfgmaster
-
-.for cust in CFGMASTER
-.if !empty(${cust})
-.if exists(${.CURDIR}/${${cust}})
-${cust}_PATH=	${.CURDIR}/${${cust}}
-.elif exists(${${cust}})
-${cust}_PATH=	${${cust}}
-.endif
-.endif
-.endfor
-
-#
-# The final resulting image is in ${.OBJDIR}/_.i and the single slice
-# image in ${.OBJDIR}/_.i.s1
-#
-
-# Main target
-all:	buildworld installworld buildimage
-
-#
-# This is where you customizations to the image can be performed
-# Please make sure to do everything relative to ${WD} here.
-#
-Customize:	_.cs
-_.cs:	_.iw _.di _.ik _.di
-	rm -f _.cs.tmp
-	touch _.cs.tmp
-.for cust in ${CUSTOMIZE}
-.if exists(${.CURDIR}/Customize/${${cust}})
-	sh -e ${.CURDIR}/Customize/${cust} ${WD} ${WORLDDIR} ${.CURDIR} ${CUSTOMIZE_ARGS}  >> _.cs.tmp 2>&1
-.elif exists(${.CURDIR}/${${cust}})
-	sh -e ${.CURDIR}/${cust} ${WD} ${WORLDDIR} ${.CURDIR} ${CUSTOMIZE_ARGS} >> _.cs.tmp 2>&1
-.else
-	sh -e ${cust} ${WD} ${WORLDDIR} ${.CURDIR} ${CUSTOMIZE_ARGS} >> _.cs.tmp 2>&1
-.endif
-.endfor
-	mv _.cs.tmp _.cs
-
-###########################################################################
-#
-# The rest is pretty (or ugly if you prefer) magic, and should generally
-# not need to be fiddled with.  Good luck if you need to venture past this
-# point.
-#
-
-# Run a buildworld with our private make.conf
-buildworld:	_.bw
-_.bw:
-	(cd ${WORLDDIR} && \
-		make ${MAKEJ} -s buildworld __MAKE_CONF=${MAKE_CONF} \
-		) > _.bw.tmp 2>&1
-	mv _.bw.tmp _.bw
-
-# Run installworld and install into our object directory
-installworld:	_.iw
-_.iw:	_.bw
-	-rm -rf ${WD} > /dev/null 2>&1
-	-chflags -R noschg ${WD} > /dev/null 2>&1
-	rm -rf ${WD}
-	mkdir -p ${WD}
-	(cd ${WORLDDIR} && \
-		make ${MAKEJ} -s installworld \
-		DESTDIR=${WD} \
-		__MAKE_CONF=${MAKE_CONF} \
-		) > _.iw.tmp 2>&1
-	mv _.iw.tmp _.iw
-
-# Run distribution target in /etc.
-_.di:	_.iw
-	mkdir -p ${WD}
-	(cd ${WORLDDIR}/etc && \
-		make ${MAKEJ} -s distribution \
-		DESTDIR=${WD} \
-		__MAKE_CONF=${MAKE_CONF} \
-		) > _.di.tmp 2>&1
-	mv _.di.tmp _.di
-
-# Build kernel
-_.bk:
-	(cd ${WORLDDIR} && \
-		make ${MAKEJ} -s buildkernel \
-		__MAKE_CONF=${MAKE_CONF} \
-		) > _.bk.tmp 2>&1
-	mv _.bk.tmp _.bk
-
-# Install kernel and hints file
-_.ik:	_.bk _.di
-	cp ${WORLDDIR}/sys/i386/conf/GENERIC.hints ${WD}/boot/device.hints
-	(cd ${WORLDDIR} && \
-		make ${MAKEJ} installkernel \
-		DESTDIR=${WD} \
-		__MAKE_CONF=${MAKE_CONF} \
-		) > _.ik.tmp 2>&1
-	mv _.ik.tmp _.ik
-
-
-# Create a disk image from the installed image
-buildimage:	_.md
-_.md:	_.cs
-	-umount ${WD}/dev > /dev/null 2>&1
-	chflags -R noschg ${WD} > /dev/null 2>&1
-	rm -rf ${WD}/dev/* ${WD}/tmp
-	# create trigger file for etc/rc.d/initdiskless
-	touch ${WD}/etc/diskless
-	mkdir -p ${WD}/conf/base/var
-	( cd ${WD}/var && find . -print | cpio -dumpl ../conf/base/var )
-	mkdir -p ${WD}/conf/base/etc
-	( cd ${WD}/etc && find . -print | cpio -dumpl ../conf/base/etc )
-	mkdir -p ${WD}/conf/default/etc
-	echo "mount -o ro /dev/${CFGSLICE}" > ${WD}/conf/default/etc/remount
-	ln -s var/tmp ${WD}/tmp
-	mtree -deU -f ${WD}/etc/mtree/BSD.root.dist -p ${WD}/
-	mtree -deU -f ${WD}/etc/mtree/BSD.usr.dist -p ${WD}/usr
-	mtree -deU -f ${WD}/etc/mtree/BSD.include.dist -p ${WD}/usr/include
-.if exists(${WD}/etc/mtree/BSD.sendmail.dist)
-	mtree -deU -f ${WD}/etc/mtree/BSD.sendmail.dist -p ${WD}/
-.endif
-.if defined(NANOBSD_PRUNE)
-	( cd ${WD} ; rm -rf ${NANOBSD_PRUNE} )
-.endif
-	(cd ${WD} && mtree -c -Kmd5digest ) > _.mtree.tmp
-	sh -e ${.CURDIR}/i386.diskimage \
-		${SECTS} \
-		${HD} \
-		${SC} \
-		${DATASIZE} \
-		${PRIROOTSLICE} \
-		${ALTROOTSLICE} \
-		${CFGSLICE} \
-		${WD} ${.OBJDIR}/_.i \
-		${CFGMASTER_PATH} \
-		> _.md.tmp 2>&1
-	mv _.mtree.tmp _.mtree
-	mv _.md.tmp _.md
-
-clean:
-	-rm -rf _.* > /dev/null 2>&1
-	-chflags -R noschg _.* > /dev/null 2>&1
-	rm -rf _.*
-
-.include <bsd.obj.mk>
diff --git a/tools/tools/nanobsd/customize.sh b/tools/tools/nanobsd/customize.sh
deleted file mode 100644
index 092464a..0000000
--- a/tools/tools/nanobsd/customize.sh
+++ /dev/null
@@ -1,72 +0,0 @@
-#! /bin/sh
-#
-# Customize a nanoBSD flash image
-#
-# Copyright (c) 2004 Thomas Quinot
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-# 
-# Usage:
-#
-# ${CUSTOMIZE} ${WD} ${WORLDDIR} ${.CURDIR} [ ${LOCAL_FILES_LIST} ]
-
-WD=$1
-WORLDDIR=$2
-CURDIR=$3
-LOCAL_FILES_LIST=$4
-
-PKG_DBDIR=${WD}/var/db/pkg
-export PKG_DBDIR
-
-# Useful stuff for diskless boot
-customizecfg() {
-  sed -i "" -e /beastie/d ${WD}/boot/loader.rc
-  sed -i "" -e /ttyd0/s/off/on/ ${WD}/etc/ttys
-  echo " -h" > ${WD}/boot.config
-}
-
-add_CURDIR() {
-  case "$1" in
-    /*) echo "$1" ;;
-    *)  echo "${CURDIR}/$1" ;;
-  esac
-}
-
-pkg_relocate() {
-  sed -e "1,/^@cwd/s#^@cwd #&${WD}#"
-}
-
-installlocalfiles() {
-  if [ -n "${LOCAL_FILES_LIST}" ]; then
-    while read src dest;
-    do
-      case "x${src}" in
-        x#*|x)
-          ;;
-        x@*)
-          eval "for pkg in `add_CURDIR \"\`echo ${src} | sed 's/^@//'\`\"`;
-                do pkg_add -M \${pkg} | pkg_relocate | pkg_add -S;
-                done"
-          ;;
-        *)
-          dest="${dest:-${src}}"
-          mkdir -p ${WD}/`dirname "${dest}x"`
-          eval cp -fp `add_CURDIR ${src}` "${WD}/${dest}"
-          ;;
-      esac
-    done < ${LOCAL_FILES_LIST}
-  fi
-}
-
-movelocaletc() {
-  if [ ! -d ${WD}/etc/local -a -d ${WD}/usr/local/etc ]; then
-    mv ${WD}/usr/local/etc ${WD}/etc/local
-    ln -s ../../etc/local ${WD}/usr/local/etc
-  fi
-}
-
-customizecfg
-installlocalfiles
-movelocaletc
diff --git a/tools/tools/nanobsd/i386.diskimage b/tools/tools/nanobsd/i386.diskimage
deleted file mode 100644
index f722e45..0000000
--- a/tools/tools/nanobsd/i386.diskimage
+++ /dev/null
@@ -1,124 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2003-2004 Poul-Henning Kamp.
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-#
-# Called as:
-#
-# ${.CURDIR}/i386.diskimage $SECTS $HD $SC $DATASIZE \
-#   $PRIROOTSLICE $ALTROOTSLICE $CFGSLICE \
-#   ${.OBJDIR}/_.w ${.OBJDIR}/_.i [ ${.CURDIR}/cfgmaster ]
-#
-# XXX: newfs params.
-
-set -ex
-
-SECTS=$1
-HD=$2
-SC=$3
-DATASIZE=$4
-PRIROOTSLICE=$5
-ALTROOTSLICE=$6
-CFGSLICE=$7
-WD=$8
-IMG=$9
-CFGMASTER=${10}
-
-NEWFSPARAM="-b 4096 -f 512 -i 8192"
-
-TMPFILE0=`mktemp -t nanobsd`
-TMPFILE1=`mktemp -t nanobsd`
-TMPMNT=`mktemp -d -t nanobsd`
-
-make_fstab () {
-  echo "/dev/$1 / ufs ro 1 1" > $4/etc/fstab
-  echo "/dev/$2 /alt ufs ro,noauto 1 1" >> $4/etc/fstab
-  echo "/dev/$3 /cfg ufs ro,noauto 1 1" >> $4/etc/fstab
-  ln -f $4/etc/fstab $4/conf/base/etc/fstab
-}
-
-get_label () {
-  case "$1" in
-    vol/*)
-      echo -n "-L "; basename $1
-      ;;
-    *)
-      echo ""
-      ;;
-  esac
-}
-
-PRIROOTLABEL=`get_label ${PRIROOTSLICE}`
-ALTROOTLABEL=`get_label ${ALTROOTSLICE}`
-CFGLABEL=`get_label ${CFGSLICE}`
-
-# Attach MD device and prepare slices
-
-dd if=/dev/zero of=${TMPFILE0} count=${SECTS}
-MD=`mdconfig -a -t vnode -f ${TMPFILE0} -x ${SC} -y ${HD}`
-rm -f ${TMPFILE0}
-echo ${SECTS} ${SC} ${HD} ${DATASIZE} | awk '
-	{
-	# size of cylinder in sectors
-	cs = $2 * $3
-	# number of full cylinders
-	cyl = int ($1 / cs)
-	print "g c" cyl " h" $3 " s" $2
-	# Size of data/conf patition, round up to full cylinder
-	dsl = int (($4 + cs - 1) / cs)
-	# Size of code partition cylinder = half the remainder
-	csl = int ((cyl - dsl) / 2)
-	# ... But that could round down, so make the data/conf
-	# use whatever the code partitions do not use.
-	dsl = cyl - csl * 2
-	print "p 1 165 " $2, csl * cs - $2
-	print "p 2 165 " $2 + csl * cs, csl * cs - $2
-	print "p 3 165 " 2 * csl * cs, dsl * cs
-	}
-' > ${TMPFILE1}
-cat ${TMPFILE1}
-fdisk -i -f ${TMPFILE1} ${MD}
-fdisk ${MD}
-boot0cfg -B -b ${WD}/boot/boot0sio -o packet -s 1 -m 3 ${MD}
-rm -f ${TMPFILE1}
-bsdlabel -w -B ${MD}s1
-
-# Prepare primary root slice
-
-newfs ${NEWFSPARAM} ${PRIROOTLABEL} -O1 -U ${MD}s1a
-mount /dev/${MD}s1a ${TMPMNT}
-(cd ${WD} && find . -print | cpio -dump ${TMPMNT}) || true
-make_fstab ${PRIROOTSLICE} ${ALTROOTSLICE} ${CFGSLICE} ${TMPMNT}
-df -i ${TMPMNT}
-umount ${TMPMNT}
-
-# Prepare alternative root slice
-
-dd if=/dev/${MD}s1 of=/dev/${MD}s2 bs=64k
-if [ -n "${ALTROOTLABEL}" ]; then
-  tunefs ${ALTROOTLABEL} /dev/${MD}s2a
-fi
-mount /dev/${MD}s2a ${TMPMNT}
-make_fstab ${ALTROOTSLICE} ${PRIROOTSLICE} ${CFGSLICE} ${TMPMNT}
-umount ${TMPMNT}
-
-# Prepare configuration slice
-
-newfs ${NEWFSPARAM} ${CFGLABEL}  -O1 -U ${MD}s3
-if [ -d "${CFGMASTER}" ]; then
-  mount /dev/${MD}s3 ${TMPMNT}
-  ( cd ${CFGMASTER} && find . -print | cpio -dumpl ${TMPMNT} )
-  umount ${TMPMNT}
-fi
-
-# Create flash images
-
-dd if=/dev/${MD} of=${IMG} bs=64k
-dd if=/dev/${MD}s1 of=${IMG}.s1 bs=64k
-
-# Detach MD device
-
-mdconfig -d -u ${MD}
diff --git a/tools/tools/nanobsd/localfiles b/tools/tools/nanobsd/localfiles
deleted file mode 100644
index 670db2d..0000000
--- a/tools/tools/nanobsd/localfiles
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Example installation list to be used with nanoBSD customization script.
-#
-# Copyright (c) 2004 Thomas Quinot
-#
-# See /usr/share/examples/etc/bsd-style-copyright for license terms.
-#
-# $FreeBSD$
-# 
-#
-# Syntax:
-#
-# SRC DEST
-# Copy SRC to DEST
-#
-# SRC
-# Copy SRC to `dirname SRC`
-#
-# @PKG
-# Install package PKG
-#
-# Both SRC and PKG may contain shell wildcards.
-#
-# Examples:
-#
-# Copy a file from the local system to the same location on the image
-#/usr/local/libexec/foo
-#
-# Copy a file from $CURDIR to a specified location on the image
-#bar				/usr/local/sbin/
-#
-# Install packages from a directory relative to $CURDIR
-# on the image
-#@mypackages/*