CRB config file.

Approved by:	re (blanket)

1 files changed, 114 insertions, 0 deletions

diff --git a/sys/arm/conf/CRB b/sys/arm/conf/CRB
new file mode 100644
index 0000000..8302ed6
--- /dev/null
+++ b/sys/arm/conf/CRB
@@ -0,0 +1,114 @@
+# GENERIC -- Generic kernel configuration file for FreeBSD/arm
+#
+# For more information on this file, please read the handbook section on
+# Kernel Configuration Files:
+#
+#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files. 
+# If you are in doubt as to the purpose or necessity of a line, check first 
+# in NOTES.
+#
+# $FreeBSD$
+
+machine		arm
+ident		CRB
+
+options 	PHYSADDR=0x00000000
+options		KERNPHYSADDR=0x00200000	
+options		KERNVIRTADDR=0xc0200000		# Used in ldscript.arm
+
+options COUNTS_PER_SEC=400000000
+options STARTUP_PAGETABLE_ADDR=0x00000000
+include		"../xscale/i8134x/std.crb"
+#To statically compile in device wiring instead of /boot/device.hints
+#hints		"GENERIC.hints"		#Default places to look for devices.
+
+#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
+makeoptions	CONF_CFLAGS=-mcpu=xscale
+options		HZ=100
+options		BREAK_TO_DEBUGGER
+#options		DEVICE_POLLING
+
+options 	SCHED_4BSD		#4BSD scheduler
+options 	INET			#InterNETworking
+options 	INET6			#IPv6 communications protocols
+options 	FFS			#Berkeley Fast Filesystem
+options 	SOFTUPDATES		#Enable FFS soft updates support
+options 	UFS_ACL			#Support for access control lists
+options 	UFS_DIRHASH		#Improve performance on big directories
+options 	NFSCLIENT		#Network Filesystem Client
+options 	NFSSERVER		#Network Filesystem Server
+options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
+#options 	MSDOSFS			#MSDOS Filesystem
+options 	CD9660			#ISO 9660 Filesystem
+#options 	PROCFS			#Process filesystem (requires PSEUDOFS)
+options 	PSEUDOFS		#Pseudo-filesystem framework
+options 	SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
+options 	KTRACE			#ktrace(1) support
+options		INTR_FILTER
+options 	SYSVSHM			#SYSV-style shared memory
+options 	SYSVMSG			#SYSV-style message queues
+options 	SYSVSEM			#SYSV-style semaphores
+options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
+options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
+options		BOOTP
+options		BOOTP_NFSROOT
+options		BOOTP_NFSV3
+options		BOOTP_WIRED_TO=em0
+options		BOOTP_COMPAT
+#options		PREEMPTION
+device		genclock
+device		loop
+device		ether
+device		nexus
+device		mem			# Memory and kernel memory devices
+#device		saarm
+device		miibus
+device		rl
+device		em
+device		uart
+device		pci
+
+device		ata
+device		atadisk         # ATA disk drives
+device		ataraid         # ATA RAID drives
+device		atapicd         # ATAPI CDROM drives
+device		atapifd         # ATAPI floppy drives
+device		atapist         # ATAPI tape drives
+options		ATA_STATIC_ID   # Static device numbering
+
+# SCSI Controllers
+
+device		pty
+#options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
+					# output.  Adds ~128k to driver.
+#options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
+					# output.  Adds ~215k to driver.
+
+# Debugging for use in -current
+options		KDB
+options 	DDB			#Enable the kernel debugger
+#options 	INVARIANTS		#Enable calls of extra sanity checking
+#options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
+#options 	WITNESS			#Enable checks to detect deadlocks and cycles
+#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
+#options		DIAGNOSTIC
+
+# To make an SMP kernel, the next two are needed
+#options 	SMP			# Symmetric MultiProcessor Kernel
+#options 	APIC_IO			# Symmetric (APIC) I/O
+options		XSCALE_CACHE_READ_WRITE_ALLOCATE
+device md
+device          random          # Entropy device
+
+device		iopwdog
+options		ARM_USE_SMALL_ALLOC
+# Floppy drives
+