remove the tina-dd driver fragment, it is unlikely that it will get finished.

3 files changed, 0 insertions, 497 deletions

diff --git a/sys/i4b/tina-dd/README b/sys/i4b/tina-dd/README
deleted file mode 100644
index 6a2386f..0000000
--- a/sys/i4b/tina-dd/README
+++ /dev/null
@@ -1,20 +0,0 @@
-
-THIS DRIVER IS NOT YET WORKING !
-================================
-
-This adds support for the active ISDN card tina-dd manufactured by
-Stollmann E+V GmbH in Hamburg, Germany. This card was also sold by 
-MIRO as the Miro P1.
-
-Christian Luehrs and Manfred Jung of Stollmann were very helpful
-giving out docs and sources to support the development of a driver
-for this card.
-
-The card supports many protocols. In order to make the card operable
-you'll need the downloadable firmware which also can be found on the
-www/ftp server, www.stollmann.de / ftp.stollmann.de.
-
-While developing this driver, i used fcdddss1.loc as of April 1994.
-
-The code is based in part on sources and header files written by
-Stollmann for their driver development kit for the tina-dd.
diff --git a/sys/i4b/tina-dd/i4b_tina_dd.c b/sys/i4b/tina-dd/i4b_tina_dd.c
deleted file mode 100644
index 8b23624..0000000
--- a/sys/i4b/tina-dd/i4b_tina_dd.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- *   Copyright (c) 1994, 1998 Hellmuth Michaelis. All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *   1. Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in the
- *      documentation and/or other materials provided with the distribution.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- *   ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- *   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- *   ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- *   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- *   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- *   OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- *   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- *   LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- *   OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- *   SUCH DAMAGE.
- *
- *---------------------------------------------------------------------------
- *
- *	i4b_tina_dd.c - i4b Stollman Tina-dd control device driver
- *	----------------------------------------------------------
- *
- * $FreeBSD$
- *
- *	last edit-date: [Sat Dec  5 18:41:38 1998]
- *
- *---------------------------------------------------------------------------*/
-
-#include "tina.h"
-
-#include <sys/param.h>
-#if defined(__FreeBSD__) && __FreeBSD__ >= 3
-#include <sys/ioccom.h>
-#else
-#include <sys/ioctl.h>
-#endif
-#include <sys/kernel.h>
-#include <sys/systm.h>
-#include <sys/conf.h>
-#include <sys/mbuf.h>
-#include <sys/proc.h>
-#include <sys/fcntl.h>
-#include <sys/socket.h>
-#include <net/if.h>
-
-#ifdef __FreeBSD__
-#include <sys/bus.h>
-#include <machine/i4b_debug.h>
-#include <machine/i4b_ioctl.h>
-#include <i386/isa/isa_device.h>
-#else
-#include <machine/bus.h>
-#include <sys/device.h>
-#include <i4b/i4b_debug.h>
-#include <i4b/i4b_ioctl.h>
-#endif
-
-#include <i4b/include/i4b_mbuf.h>
-#include <i4b/tina-dd/i4b_tina_ioctl.h>
-
-#ifndef COMPAT_OLDISA
-#error "The tina device requires the old isa compatibility shims"
-#endif
-
-static int openflag = 0;
-
-int tinaprobe(struct isa_device *dev);
-int tinaattach(struct isa_device *dev);
-void tinaintr(int unit);
-
-struct isa_driver tinadriver = {
-	INTR_TYPE_NET,
-	tinaprobe,
-	tinaattach,
-	"tina",
-	0
-};
-COMPAT_ISA_DRIVER(tina, tinadriver);
-
-static struct tina_softc {
-	int sc_unit;
-	int sc_iobase;
-} tina_sc[NTINA];
-
-static	d_open_t	tinaopen;
-static	d_close_t	tinaclose;
-static	d_ioctl_t	tinaioctl;
-#if defined(__FreeBSD__) && __FreeBSD__ >= 3
-static d_poll_t		tinapoll;
-#define POLLFIELD	tinapoll
-#else
-#define POLLFIELD	noselect
-#endif
-
-#define CDEV_MAJOR 54
-static struct cdevsw tina_cdevsw = {
-	/* open */	tinaopen,
-	/* close */	tinaclose,
-	/* read */	noread,
-	/* write */	nowrite,
-	/* ioctl */	tinaioctl,
-	/* poll */	POLLFIELD,
-	/* mmap */	nommap,
-	/* strategy */	nostrategy,
-	/* name */	"tina",
-	/* maj */	CDEV_MAJOR,
-	/* dump */	nodump,
-	/* psize */	nopsize,
-	/* flags */	0,
-	/* bmaj */	-1
-};
-
-static void setupaddr(unsigned short iobase, unsigned int addr);
-static void readblock(unsigned short iobase, unsigned int addr,
-	  unsigned char *dst, unsigned int len);
-static void writeblock(unsigned short iobase, unsigned char *src,
-	  unsigned long addr, int len);
-
-/*---------------------------------------------------------------------------*
- *	tina - device driver probe routine
- *---------------------------------------------------------------------------*/
-int
-tinaprobe(struct isa_device *dev)
-{
-	u_char byte;
-	
-#define SETLOW	0x55
-#define SETMID	0xaa
-#define SETHIGH 0x06
-
-	outb((dev->id_iobase + ADDR_CNTL), SETLOW);
-
-	if((byte = inb(dev->id_iobase + ADDR_CNTL)) != SETLOW)
-	{
-		printf("tina%d: probe low failed, 0x%x != 0x%x\n",
-			dev->id_unit, byte, SETLOW);		
-		return(0);
-	}
-	
-	outb((dev->id_iobase + ADDR_CNTM), SETMID);
-	if((byte = inb(dev->id_iobase + ADDR_CNTM)) != SETMID)
-	{
-		printf("tina%d: probe mid failed, 0x%x != 0x%x\n",
-			dev->id_unit, byte, SETMID);		
-		return(0);
-	}
-	
-	outb((dev->id_iobase + ADDR_CNTH), SETHIGH);
-	if(((byte = inb(dev->id_iobase + ADDR_CNTH)) & 0x0f) != SETHIGH)
-	{
-		printf("tina%d: probe high failed, 0x%x != 0x%x\n",
-			dev->id_unit, byte, SETHIGH);		
-		return(0);
-	}
-
-	printf("tina%d: status register = 0x%x\n",
-			dev->id_unit, inb(dev->id_iobase + CTRL_STAT));
-	
-	return(1);			/* board found */
-}
-#undef SETLOW
-#undef SETMID
-#undef SETHIGH
-
-/*---------------------------------------------------------------------------*
- *	tina - device driver attach routine
- *---------------------------------------------------------------------------*/
-int
-tinaattach(struct isa_device *dev)
-{
-	struct tina_softc *sc = &tina_sc[dev->id_unit];
-
-	sc->sc_unit = dev->id_unit;
-	sc->sc_iobase = dev->id_iobase;	
-
-	printf("tina%d: attaching Tina-dd\n", dev->id_unit);
-
-	return(1);
-}
-
-/*---------------------------------------------------------------------------*
- *	tina - device driver interrupt routine
- *---------------------------------------------------------------------------*/
-void
-tinaintr(int unit)
-{
-}
-
-#if BSD > 199306 && defined(__FreeBSD__)
-/*---------------------------------------------------------------------------*
- *	initialization at kernel load time
- *---------------------------------------------------------------------------*/
-static void
-tinainit(void *unused)
-{
-
-    cdevsw_add(&tina_cdevsw);
-}
-
-SYSINIT(tinadev, SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR, &tinainit, NULL);
-
-#endif /* BSD > 199306 && defined(__FreeBSD__) */
-
-/*---------------------------------------------------------------------------*
- *	tinaopen - device driver open routine
- *---------------------------------------------------------------------------*/
-static int
-tinaopen(dev_t dev, int flag, int fmt, struct proc *p)
-{
-	if(minor(dev))
-		return (ENXIO);
-
-	if(openflag)
-		return (EBUSY);
-	
-	openflag = 1;
-	
-	return(0);
-}
-
-/*---------------------------------------------------------------------------*
- *	tinaclose - device driver close routine
- *---------------------------------------------------------------------------*/
-static int
-tinaclose(dev_t dev, int flag, int fmt, struct proc *p)
-{
-	openflag = 0;
-	return(0);
-}
-
-/*---------------------------------------------------------------------------*
- *	tinaioctl - device driver ioctl routine
- *---------------------------------------------------------------------------*/
-static int
-tinaioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
-{
-	struct tina_softc *sc = &tina_sc[minor(dev)];
-	u_short iobase = sc->sc_iobase;
-	int error = 0;
-	int s;
-
-	if(minor(dev))
-		return(ENODEV);
-
-	s = splimp();
-	
-	switch(cmd)
-	{
-		/* hardware layer - control & status register */
-
-		case ISDN_GETCSR:	/* return control register */
-			*(unsigned char *)data = inb(iobase + CTRL_STAT);
-			break;
-			
-		case ISDN_SETCSR:	/* set status register */
-			outb((iobase + CTRL_STAT), *(unsigned char *)data);
-			break;
-			
-		/* hardware layer - dual ported memory */
-		
-		case ISDN_GETBLK:	/* get block from dual port mem */
-			readblock(iobase, (*(struct record *)data).addr,
-					  (*(struct record *)data).data,
-					  (*(struct record *)data).length);
-			break;
-
-		case ISDN_SETBLK:	/* write block to dual port mem */
-			writeblock(iobase, (*(struct record *)data).data,
-					   (*(struct record *)data).addr,
-					   (*(struct record *)data).length);
-			break;
-
-		default:
-			error = ENOTTY;
-			break;
-	}
-	return(error);
-}
-
-/*---------------------------------------------------------------------------*
- *	tinapoll - device driver poll routine
- *---------------------------------------------------------------------------*/
-#if defined(__FreeBSD__) && __FreeBSD__ >= 3
-static int
-tinapoll (dev_t dev, int events, struct proc *p)
-{
-	return (ENODEV);
-}
-#endif
-
-/*===========================================================================*
- *	tina dual ported memory access
- *===========================================================================*/
- 
-/*---------------------------------------------------------------------------*
- *	setup address for accessing tina-dd ram
- *---------------------------------------------------------------------------*/
-static void
-setupaddr(unsigned short iobase, unsigned int addr)
-{
-	outb((iobase + ADDR_CNTL), (unsigned char) addr & 0xff);
-	outb((iobase + ADDR_CNTM), (unsigned char) ((addr >> 8) & 0xff));
-	outb((iobase + ADDR_CNTH), (unsigned char) ((addr >> 16) & 0xff));
-}
-
-
-/*---------------------------------------------------------------------------*
- *	read block from tina-dd dual ported ram
- *---------------------------------------------------------------------------*/
-static void
-readblock(unsigned short iobase, unsigned int addr,
-	  unsigned char *dst, unsigned int len)
-{
-	setupaddr(iobase, addr);	/* setup start address */
-
-	while(len--)			/* tina-dd mem -> pc mem */
-		*dst++ = inb(iobase + DATA_LOW_INC);
-}
-
-/*---------------------------------------------------------------------------*
- *	write block to tina-dd dual ported ram
- *---------------------------------------------------------------------------*/
-static void
-writeblock(unsigned short iobase, unsigned char *src,
-	  unsigned long addr, int len)
-{
-	setupaddr(iobase, addr);	/* setup start address */
-
-	while(len--)			/* pc mem -> tina-dd mem */
-		outb((iobase + DATA_LOW_INC), *src++);
-}
diff --git a/sys/i4b/tina-dd/i4b_tina_ioctl.h b/sys/i4b/tina-dd/i4b_tina_ioctl.h
deleted file mode 100644
index ec422f0..0000000
--- a/sys/i4b/tina-dd/i4b_tina_ioctl.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *   Copyright (c) 1994, 1998 Hellmuth Michaelis. All rights reserved.
- *
- *   Based on code written by Stollmann GmbH, Hamburg. Many thanks to
- *   Christian Luehrs and Manfred Jung for docs, sources and answers!
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *   1. Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in the
- *      documentation and/or other materials provided with the distribution.
- *   
- *   THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- *   ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- *   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- *   ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- *   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- *   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- *   OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- *   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- *   LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- *   OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- *   SUCH DAMAGE.
- *
- *---------------------------------------------------------------------------
- *
- *	i4b_tina_ioctl.h - i4b Stollman Tina-dd ioctl header file
- *	---------------------------------------------------------
- *
- * $FreeBSD$
- *
- *	last edit-date: [Sat Dec  5 18:41:51 1998]
- *
- *---------------------------------------------------------------------------*/
-
-#ifndef _I4B_TINA_IOCTL_H_
-#define _I4B_TINA_IOCTL_H_
-
-#define TINA_IOSIZE     8               /* 8 byte wide iospace occupied */
-
-/*---------------------------------------------------------------------------*
- *	register offsets in i/o address space
- *---------------------------------------------------------------------------*/
-
-#define CTRL_STAT	0		/* control & status	*/
-
-#define ADDR_CNTL	1		/* address pointer low	*/
-#define ADDR_CNTM	2		/* address pointer mid	*/
-#define ADDR_CNTH	3		/* address pointer high	*/
-
-#define DATA_LOW	4		/* data register low	*/
-#define DATA_HIGH	5		/* data register high	*/
-
-#define DATA_LOW_INC	6		/* data register low, post inc	*/
-#define DATA_HIGH_INC	7		/* data register high, post inc	*/
-
-/*---------------------------------------------------------------------------*
- *	status register (CTRL_STAT read access)
- *---------------------------------------------------------------------------*/
-
-#define CR_INTC         0x80		/* irq FROM tina-dd TO pc active */
-#define CR_INTP         0x40		/* irq FROM pc TO tina-dd active */
-#define CR_INTPA        0x20		/* irq FROM pc TO tina-dd active */
-#define CR_NMI          0x10		/* nmi FROM PC TO tina-dd active */
-#define CR_FLASHLD      0x08		/* read of the FLASHLD-bit (n/c) */
-#define CR_S2C          0x04		/* info bit */
-#define CR_S1C          0x02		/* info bit */
-#define CR_S0C          0x01		/* info bit */
-
-/*---------------------------------------------------------------------------*
- *	control register (CTRL_STAT write access)
- *---------------------------------------------------------------------------*/
-
-#define CR_CLR_INTC     0x80		/* clear irq on tina-dd */
-#define CR_SET_INTP     0x40		/* trigger irq on tina-dd */
-#define CR_RESET	0x20		/* reset tina-dd */
-#define CR_SET_NMI      0x10		/* trigger nmi on tina-dd */
-#define CR_SET_FLASHLD  0x08		/* activates pin FLASHLD (n/c) */
-#define CR_S2P          0x04		/* info bit (not readable !) */
-#define CR_S1P          0x02		/* info bit (not readable !) */
-#define CR_S0P          0x01		/* info bit (not readable !) */
-
-/*---------------------------------------------------------------------------*
- *	misc definitions in dual-ported mem on board of tina-dd
- *---------------------------------------------------------------------------*/
-
-#define FW_SYSCB	0x200		/* address of FW SYSCB / MJ 300392 */
-#define FW_SINFO_NAME	0x220		/* address of general info label   */
-
-#define FW_HW_TYPE	0x224		/* address of hardware type byte:  */
-#define  FW_HW_UNDEF	0x00		/* undefined ..                    */
-#define  FW_HW_TINA_DD	0x10		/* TINA-dd			   */
-#define  FW_HW_TINA_DS	0x20		/* TINA-ds 	(B channel/ser ?)  */
-#define  FW_HW_TINA_D	0x30		/* TINA-d	(one B channel ?)  */
-#define  FW_HW_TINA_DDM	0x40		/* TINA-dd with fax module	   */
-#define  FW_HW_TINA_DDS	0x50		/* TINA-dd with fax/voice module   */
-#define  FW_HW_SICCE	0x80		/* X.25 board			   */
-#define  FW_HW_ASIC	0x01		/* ASIC version bit                */
-
-#define FW_STAT		0x228		/* address of firmware status byte */
-#define  FW_READY	0x20		/* firmware ready bit		   */
-#define  FW_BOOTPRM_RDY	0x02		/* boot PROM ready		   */
-#define  FW_UNDEF_0	0x00		/* undefined			   */
-#define  FW_UNDEF_1	0xFF		/* undefined			   */
-
-#define FW_SINFO_ID	"SYSI"		/* general info label for FW > 2.13*/
-#define FW_SINFO_ID_LEN	4
-
-#define FW_ADDR_PROFPTR 0x260		/* addr of ptr to board profile	   */
-
-/*===========================================================================*
- *	Layer 0 - Hardware layer
- *===========================================================================*/
-
-/* control and status register access */
-
-#define ISDN_GETCSR	 _IOR('I', 1, unsigned char)	/* get csr */
-#define ISDN_SETCSR	 _IOW('I', 2, unsigned char)	/* set csr */
-
-/* dual ported ram access */
-
-#define ISDN_GETBLK	_IOWR('I', 3, struct record)	/* get dpr record */
-#define ISDN_SETBLK	 _IOW('I', 4, struct record)	/* set dpr record */
-
-/*---------------------------------------------------------------------------*
- *	record structure for dual ported ram block rd/wr
- *---------------------------------------------------------------------------*/
-struct record {
-	unsigned int length;		/* length of data block */
-	unsigned int addr;		/* address of mem on tina-dd board */
-	unsigned char *data;		/* pointer to the datablock itself */
-};
-
-#endif /* _I4B_TINA_IOCTL_H_ */