This was copied to IMX6, which has since evolved further. Remove this

as it is no longer needed.

1 files changed, 0 insertions, 159 deletions

diff --git a/sys/arm/conf/WANDBOARD.common b/sys/arm/conf/WANDBOARD.common
deleted file mode 100644
index a147353..0000000
--- a/sys/arm/conf/WANDBOARD.common
+++ /dev/null
@@ -1,159 +0,0 @@
-# Kernel configuration for Wandboard
-#
-# For more information on this file, please read the config(5) manual page,
-# and/or the handbook section on Kernel Configuration Files:
-#
-#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
-#
-# The handbook is also available locally in /usr/share/doc/handbook
-# if you've installed the doc distribution, otherwise always see the
-# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
-# latest information.
-#
-# An exhaustive list of options and more detailed explanations of the
-# device lines is also present in the ../../conf/NOTES and NOTES files.
-# If you are in doubt as to the purpose or necessity of a line, check first
-# in NOTES.
-#
-# $FreeBSD$
-
-include 	"../freescale/imx/std.imx6"
-
-options  	HZ=250			# Scheduling quantum is 4 milliseconds.
-options  	SCHED_4BSD		# 4BSD scheduler
-options  	PREEMPTION		# Enable kernel thread preemption
-options  	INET			# InterNETworking
-options  	INET6			# IPv6 communications protocols
-#options  	SCTP			# Stream Control Transmission Protocol
-options  	FFS			# Berkeley Fast Filesystem
-options  	SOFTUPDATES		# Enable FFS soft updates support
-options  	UFS_ACL			# Support for access control lists
-options  	UFS_DIRHASH		# Improve performance on big directories
-options  	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
-#options  	MD_ROOT			# MD is a potential root device
-options  	NFSCL			# New Network Filesystem Client
-#options  	NFSD			# New Network Filesystem Server
-options  	NFSLOCKD		# Network Lock Manager
-options  	NFS_ROOT		# NFS usable as /, requires NFSCL
-options 	TMPFS			# Efficient memory filesystem
-options  	MSDOSFS			# MSDOS Filesystem
-options  	CD9660			# ISO 9660 Filesystem
-#options  	PROCFS			# Process filesystem (requires PSEUDOFS)
-options  	PSEUDOFS		# Pseudo-filesystem framework
-options 	GEOM_PART_BSD		# BSD partition scheme
-options 	GEOM_PART_MBR		# MBR partition scheme
-options  	GEOM_PART_GPT		# GUID Partition Tables.
-options  	GEOM_LABEL		# Provides labelization
-options  	KTRACE			# ktrace(1) support
-options  	SYSVSHM			# SYSV-style shared memory
-options  	SYSVMSG			# SYSV-style message queues
-options  	SYSVSEM			# SYSV-style semaphores
-options  	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
-options  	INCLUDE_CONFIG_FILE	# Include this file in kernel
-
-# Debugging support.  Always need this:
-options  	KDB			# Enable kernel debugger support.
-# For minimum debugger support use KDB_TRACE, for interactive use DDB.
-#options  	KDB_TRACE		# Print a stack trace for a panic.
-options  	DDB			# Support DDB.
-# For full debugger support use this instead:
-#options  	GDB			# Support remote GDB.
-# Other debugging options...
-makeoptions  	DEBUG=-g		# Build kernel with gdb(1) debug symbols
-options  	ALT_BREAK_TO_DEBUGGER	# Use <CR><tilde><ctrl-b> to enter debugger.
-#options  	DEBUG
-#options  	DEADLKRES		# Enable the deadlock resolver
-#options  	INVARIANTS		# Enable calls of extra sanity checking
-#options  	INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
-#options  	WITNESS			# Enable checks to detect deadlocks and cycles
-
-# Note that 'bpf' is required for DHCP.
-device  	bpf			# Berkeley packet filter
-
-# Pseudo devices.
-device  	loop			# Network loopback
-device  	random			# Entropy device
-device  	vlan			# 802.1Q VLAN support
-device  	tun			# Packet tunnel.
-device  	md			# Memory "disks"
-#device  	gif			# IPv6 and IPv4 tunneling
-#device  	faith			# IPv6-to-IPv4 relaying (translation)
-#device  	firmware		# firmware assist module
-device  	ether			# Ethernet support
-device  	miibus			# Required for ethernet
-
-# Serial (COM) ports
-device  	uart			# Multi-uart driver
-
-#device  	iomux			# IO Multiplexor
-
-# SCSI peripherals
-device  	scbus			# SCSI bus (required for SCSI)
-device  	da			# Direct Access (disks)
-device  	cd			# CD
-device  	pass			# Passthrough device (direct SCSI access)
-
-# USB support
-#options  	USB_DEBUG		# enable debug msgs
-options  USB_HOST_ALIGN=32		# Required for ARM, set to cache line size.
-device  	ehci			# OHCI USB interface
-device  	usb			# USB Bus (required)
-device  	umass			# Disks/Mass storage - Requires scbus and da
-device  	uhid			# "Human Interface Devices"
-device  	u3g			# USB modems
-
-# USB Ethernet, requires miibus
-#device  	aue			# ADMtek USB Ethernet
-#device  	axe			# ASIX Electronics USB Ethernet
-#device  	cdce			# Generic USB over Ethernet
-#device  	cue			# CATC USB Ethernet
-#device  	kue			# Kawasaki LSI USB Ethernet
-#device  	rue			# RealTek RTL8150 USB Ethernet
-#device  	udav			# Davicom DM9601E USB
-
-# USB Wireless
-#device  	rum			# Ralink Technology RT2501USB wireless NICs
-
-# Watchdog timer.
-# WARNING: can't be disabled!!!
-#device  	imxwdt			# Watchdog
-
-# Wireless NIC cards
-#device  	wlan			# 802.11 support
-#device  	wlan_wep		# 802.11 WEP support
-#device  	wlan_ccmp		# 802.11 CCMP support
-#device  	wlan_tkip		# 802.11 TKIP support
-#device  	wlan_amrr		# AMRR transmit rate control algorithm
-
-# NOTE: serial console will be disabled if syscons enabled
-# Uncomment following lines for framebuffer/syscons support
-# Wandboard has no video console support yet.
-#device  	sc
-#device  	kbdmux
-#options  	SC_DFLT_FONT		# compile font in
-#makeoptions  	SC_DFLT_FONT=cp437
-#device  	ukbd			# Allow keyboard like HIDs to control console
-#device  	ums
-
-# required for netbooting
-#options  	BOOTP
-#options  	BOOTP_COMPAT
-#options  	BOOTP_NFSROOT
-#options  	BOOTP_NFSV3
-#options  	BOOTP_WIRED_TO=ffec0
-
-# U-Boot stuff lives on slice 1, FreeBSD on slice 2.
-options  	ROOTDEVNAME=\"ufs:mmcsd0s2a\"
-
-#device  	fsliic			# Freescale i2c/iic (not ready yet)
-#device  	iic			# iic protocol
-#device  	iicbus			# iic bus
-
-device  	sdhci			# SD controller
-device  	mmc			# SD/MMC protocol
-device  	mmcsd			# SDCard disk device
-
-device  	ffec			# Freescale Fast Ethernet Controller
-
-options  	FREEBSD_BOOT_LOADER	# Process metadata passed from loader(8)
-