Preceed/preceeding are not english words. Use precede or preceding.

12 files changed, 14 insertions, 14 deletions

diff --git a/sys/boot/alpha/libalpha/bootinfo.c b/sys/boot/alpha/libalpha/bootinfo.c
index e357156..60fd45d 100644
--- a/sys/boot/alpha/libalpha/bootinfo.c
+++ b/sys/boot/alpha/libalpha/bootinfo.c
@@ -72,7 +72,7 @@ bi_copyenv(vm_offset_t addr)
  * used as a directory for loaded modules.
  *
  * Module data is presented in a self-describing format.  Each datum
- * is preceeded by a 32-bit identifier and a 32-bit size field.
+ * is preceded by a 32-bit identifier and a 32-bit size field.
  *
  * Currently, the following data are saved:
  *
diff --git a/sys/boot/arc/lib/bootinfo.c b/sys/boot/arc/lib/bootinfo.c
index f95e7e4..a0b858c 100644
--- a/sys/boot/arc/lib/bootinfo.c
+++ b/sys/boot/arc/lib/bootinfo.c
@@ -70,7 +70,7 @@ bi_copyenv(vm_offset_t addr)
  * used as a directory for loaded modules.
  *
  * Module data is presented in a self-describing format.  Each datum
- * is preceeded by a 32-bit identifier and a 32-bit size field.
+ * is preceded by a 32-bit identifier and a 32-bit size field.
  *
  * Currently, the following data are saved:
  *
diff --git a/sys/boot/i386/libi386/bootinfo.c b/sys/boot/i386/libi386/bootinfo.c
index 05d28d1..e07ff88 100644
--- a/sys/boot/i386/libi386/bootinfo.c
+++ b/sys/boot/i386/libi386/bootinfo.c
@@ -157,7 +157,7 @@ bi_copyenv(vm_offset_t addr)
  * used as a directory for loaded modules.
  *
  * Module data is presented in a self-describing format.  Each datum
- * is preceeded by a 32-bit identifier and a 32-bit size field.
+ * is preceded by a 32-bit identifier and a 32-bit size field.
  *
  * Currently, the following data are saved:
  *
diff --git a/sys/boot/i386/libi386/bootinfo32.c b/sys/boot/i386/libi386/bootinfo32.c
index 05d28d1..e07ff88 100644
--- a/sys/boot/i386/libi386/bootinfo32.c
+++ b/sys/boot/i386/libi386/bootinfo32.c
@@ -157,7 +157,7 @@ bi_copyenv(vm_offset_t addr)
  * used as a directory for loaded modules.
  *
  * Module data is presented in a self-describing format.  Each datum
- * is preceeded by a 32-bit identifier and a 32-bit size field.
+ * is preceded by a 32-bit identifier and a 32-bit size field.
  *
  * Currently, the following data are saved:
  *
diff --git a/sys/boot/i386/libi386/bootinfo64.c b/sys/boot/i386/libi386/bootinfo64.c
index 05d28d1..e07ff88 100644
--- a/sys/boot/i386/libi386/bootinfo64.c
+++ b/sys/boot/i386/libi386/bootinfo64.c
@@ -157,7 +157,7 @@ bi_copyenv(vm_offset_t addr)
  * used as a directory for loaded modules.
  *
  * Module data is presented in a self-describing format.  Each datum
- * is preceeded by a 32-bit identifier and a 32-bit size field.
+ * is preceded by a 32-bit identifier and a 32-bit size field.
  *
  * Currently, the following data are saved:
  *
diff --git a/sys/dev/aic7xxx/aic7xxx.h b/sys/dev/aic7xxx/aic7xxx.h
index ecfe1ea..f8e81ec 100644
--- a/sys/dev/aic7xxx/aic7xxx.h
+++ b/sys/dev/aic7xxx/aic7xxx.h
@@ -142,7 +142,7 @@ struct scb_platform_data;
  *	   we must be sure that 4 slots are empty when we write to clear
  *	   the queue.  This reduces us to 253 SCBs: 1 that just completed
  *	   and the known three additional empty slots in the queue that
- *	   preceed it.
+ *	   precede it.
  */
 #define AHC_MAX_QUEUE	253
 
diff --git a/sys/dev/aic7xxx/aic7xxx.seq b/sys/dev/aic7xxx/aic7xxx.seq
index bcb6dcc..2a3f449 100644
--- a/sys/dev/aic7xxx/aic7xxx.seq
+++ b/sys/dev/aic7xxx/aic7xxx.seq
@@ -511,7 +511,7 @@ target_disconnect:
 		mvi	MSG_DISCONNECT call target_outb;
 
 target_busfree_wait:
-		/* Wait for preceeding I/O session to complete. */
+		/* Wait for preceding I/O session to complete. */
 		test	SCSISIGI, ACKI jnz .;
 target_busfree:
 		and	SIMODE1, ~ENBUSFREE;
@@ -1772,7 +1772,7 @@ if ((ahc->flags & AHC_TARGETROLE) != 0) {
  * from out to in, wait an additional data release delay before continuing.
  */
 change_phase:
-	/* Wait for preceeding I/O session to complete. */
+	/* Wait for preceding I/O session to complete. */
 	test	SCSISIGI, ACKI jnz .;
 
 	/* Change the phase */
diff --git a/sys/dev/aic7xxx/aic7xxx_93cx6.c b/sys/dev/aic7xxx/aic7xxx_93cx6.c
index f0f6a53..42078a5 100644
--- a/sys/dev/aic7xxx/aic7xxx_93cx6.c
+++ b/sys/dev/aic7xxx/aic7xxx_93cx6.c
@@ -41,7 +41,7 @@
  *     -------------------------------------------------------------------
  *     READ        1    10   A5 - A0             Reads data stored in memory,
  *                                               starting at specified address
- *     EWEN        1    00   11XXXX              Write enable must preceed
+ *     EWEN        1    00   11XXXX              Write enable must precede
  *                                               all programming modes
  *     ERASE       1    11   A5 - A0             Erase register A5A4A3A2A1A0
  *     WRITE       1    01   A5 - A0   D15 - D0  Writes register
diff --git a/sys/gnu/ext2fs/ext2_alloc.c b/sys/gnu/ext2fs/ext2_alloc.c
index 36fda15..5b04196 100644
--- a/sys/gnu/ext2fs/ext2_alloc.c
+++ b/sys/gnu/ext2fs/ext2_alloc.c
@@ -198,7 +198,7 @@ nospace:
  * logical blocks to be made contiguous is given. The allocator attempts
  * to find a range of sequential blocks starting as close as possible to
  * an fs_rotdelay offset from the end of the allocation for the logical
- * block immediately preceeding the current range. If successful, the
+ * block immediately preceding the current range. If successful, the
  * physical block numbers in the buffer pointers and in the inode are
  * changed to reflect the new allocation. If unsuccessful, the allocation
  * is left unchanged. The success in doing the reallocation is returned.
diff --git a/sys/gnu/fs/ext2fs/ext2_alloc.c b/sys/gnu/fs/ext2fs/ext2_alloc.c
index 36fda15..5b04196 100644
--- a/sys/gnu/fs/ext2fs/ext2_alloc.c
+++ b/sys/gnu/fs/ext2fs/ext2_alloc.c
@@ -198,7 +198,7 @@ nospace:
  * logical blocks to be made contiguous is given. The allocator attempts
  * to find a range of sequential blocks starting as close as possible to
  * an fs_rotdelay offset from the end of the allocation for the logical
- * block immediately preceeding the current range. If successful, the
+ * block immediately preceding the current range. If successful, the
  * physical block numbers in the buffer pointers and in the inode are
  * changed to reflect the new allocation. If unsuccessful, the allocation
  * is left unchanged. The success in doing the reallocation is returned.
diff --git a/sys/i386/i386/userconfig.c b/sys/i386/i386/userconfig.c
index 043ed99..034334e 100644
--- a/sys/i386/i386/userconfig.c
+++ b/sys/i386/i386/userconfig.c
@@ -2105,7 +2105,7 @@ dolist(int row, int num, int detail, int *ofs, DEV_LIST **list, char *dhelp)
 		extended=1;
 		break;
 		    
-	    case '[':				/* cheat : always preceeds cursor move */
+	    case '[':				/* cheat : always precedes cursor move */
 	    case 'O':				/* ANSI application key mode */
 		if (extended==1)
 		    extended=2;
@@ -2893,7 +2893,7 @@ introfunc(CmdParm *parms)
 		extended = 1;
 		break;
 		    
-	    case '[':				/* cheat : always preceeds cursor move */
+	    case '[':				/* cheat : always precedes cursor move */
 	    case 'O':				/* ANSI application key mode */
 		if (extended == 1)
 		    extended = 2;
diff --git a/sys/i4b/layer3/i4b_l3fsm.c b/sys/i4b/layer3/i4b_l3fsm.c
index e8e6ad7..bd60d5a 100644
--- a/sys/i4b/layer3/i4b_l3fsm.c
+++ b/sys/i4b/layer3/i4b_l3fsm.c
@@ -366,7 +366,7 @@ static void F_01L(call_desc_t *cd)
 	 * we react here as if we received a CALL PROCEEDING because
 	 * several PBX's react with a SETUP ACK even if the called
 	 * number is complete AND we sent a SENDING COMPLETE in the
-	 * preceeding SETUP message. (-hm)
+	 * preceding SETUP message. (-hm)
 	 */
 
 	T310_start(cd);