Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.

This means that their use is restricted to a single C file.

8 files changed, 9 insertions, 8 deletions

diff --git a/sys/powerpc/ofw/ofw_real.c b/sys/powerpc/ofw/ofw_real.c
index 1fc2ed1..d265943 100644
--- a/sys/powerpc/ofw/ofw_real.c
+++ b/sys/powerpc/ofw/ofw_real.c
@@ -158,7 +158,8 @@ static ofw_def_t ofw_32bit = {
 };
 OFW_DEF(ofw_32bit);
 
-MALLOC_DEFINE(M_OFWREAL, "ofwreal", "Open Firmware Real Mode Bounce Page");
+static MALLOC_DEFINE(M_OFWREAL, "ofwreal",
+    "Open Firmware Real Mode Bounce Page");
 
 static int (*openfirmware)(void *);
 
diff --git a/sys/powerpc/ofw/rtas.c b/sys/powerpc/ofw/rtas.c
index 66ce12f..c6d8969 100644
--- a/sys/powerpc/ofw/rtas.c
+++ b/sys/powerpc/ofw/rtas.c
@@ -47,7 +47,7 @@ __FBSDID("$FreeBSD$");
 
 #include <dev/ofw/openfirm.h>
 
-MALLOC_DEFINE(M_RTAS, "rtas", "Run Time Abstraction Service");
+static MALLOC_DEFINE(M_RTAS, "rtas", "Run Time Abstraction Service");
 
 static vm_offset_t	rtas_bounce_phys;
 static caddr_t		rtas_bounce_virt;
diff --git a/sys/powerpc/powermac/dbdma.c b/sys/powerpc/powermac/dbdma.c
index 1172606..6712c1a 100644
--- a/sys/powerpc/powermac/dbdma.c
+++ b/sys/powerpc/powermac/dbdma.c
@@ -40,7 +40,7 @@ __FBSDID("$FreeBSD$");
 
 #include "dbdmavar.h"
 
-MALLOC_DEFINE(M_DBDMA, "dbdma", "DBDMA Command List");
+static MALLOC_DEFINE(M_DBDMA, "dbdma", "DBDMA Command List");
 
 static uint32_t dbdma_read_reg(dbdma_channel_t *, u_int);
 static void dbdma_write_reg(dbdma_channel_t *, u_int, uint32_t);
diff --git a/sys/powerpc/powermac/fcu.c b/sys/powerpc/powermac/fcu.c
index cf5b466..109833d 100644
--- a/sys/powerpc/powermac/fcu.c
+++ b/sys/powerpc/powermac/fcu.c
@@ -131,7 +131,7 @@ static driver_t fcu_driver = {
 static devclass_t fcu_devclass;
 
 DRIVER_MODULE(fcu, iicbus, fcu_driver, fcu_devclass, 0, 0);
-MALLOC_DEFINE(M_FCU, "fcu", "FCU Sensor Information");
+static MALLOC_DEFINE(M_FCU, "fcu", "FCU Sensor Information");
 
 static int
 fcu_write(device_t dev, uint32_t addr, uint8_t reg, uint8_t *buff,
diff --git a/sys/powerpc/powermac/powermac_thermal.c b/sys/powerpc/powermac/powermac_thermal.c
index 9c1f59d..db0611a 100644
--- a/sys/powerpc/powermac/powermac_thermal.c
+++ b/sys/powerpc/powermac/powermac_thermal.c
@@ -58,7 +58,7 @@ SYSINIT(pmac_therm_setup, SI_SUB_KTHREAD_IDLE, SI_ORDER_ANY, kproc_start,
     &pmac_therm_kp);
 SYSCTL_INT(_machdep, OID_AUTO, manage_fans, CTLFLAG_RW | CTLFLAG_TUN,
     &enable_pmac_thermal, 1, "Enable automatic fan management");
-MALLOC_DEFINE(M_PMACTHERM, "pmactherm", "Powermac Thermal Management");
+static MALLOC_DEFINE(M_PMACTHERM, "pmactherm", "Powermac Thermal Management");
 
 struct pmac_fan_le {
 	struct pmac_fan			*fan;
diff --git a/sys/powerpc/powermac/smu.c b/sys/powerpc/powermac/smu.c
index ede97a1..b1b29e1 100644
--- a/sys/powerpc/powermac/smu.c
+++ b/sys/powerpc/powermac/smu.c
@@ -197,7 +197,7 @@ static driver_t smu_driver = {
 static devclass_t smu_devclass;
 
 DRIVER_MODULE(smu, nexus, smu_driver, smu_devclass, 0, 0);
-MALLOC_DEFINE(M_SMU, "smu", "SMU Sensor Information");
+static MALLOC_DEFINE(M_SMU, "smu", "SMU Sensor Information");
 
 #define SMU_MAILBOX		0x8000860c
 #define SMU_FANMGT_INTERVAL	1000 /* ms */
diff --git a/sys/powerpc/powermac/smusat.c b/sys/powerpc/powermac/smusat.c
index fcaa9ed..974e98c 100644
--- a/sys/powerpc/powermac/smusat.c
+++ b/sys/powerpc/powermac/smusat.c
@@ -63,7 +63,7 @@ static int	smusat_attach(device_t);
 static int	smusat_sensor_sysctl(SYSCTL_HANDLER_ARGS);
 static int	smusat_sensor_read(struct smu_sensor *sens);
 
-MALLOC_DEFINE(M_SMUSAT, "smusat", "SMU Sattelite Sensors");
+static MALLOC_DEFINE(M_SMUSAT, "smusat", "SMU Sattelite Sensors");
 
 static device_method_t  smusat_methods[] = {
 	/* Device interface */
diff --git a/sys/powerpc/powerpc/intr_machdep.c b/sys/powerpc/powerpc/intr_machdep.c
index 1e6342c..abfe905 100644
--- a/sys/powerpc/powerpc/intr_machdep.c
+++ b/sys/powerpc/powerpc/intr_machdep.c
@@ -89,7 +89,7 @@
 
 #define	MAX_STRAY_LOG	5
 
-MALLOC_DEFINE(M_INTR, "intr", "interrupt handler data");
+static MALLOC_DEFINE(M_INTR, "intr", "interrupt handler data");
 
 struct powerpc_intr {
 	struct intr_event *event;