Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>

Name change: ncr_reg.h -> ncrreg.h

1 files changed, 547 insertions, 0 deletions

diff --git a/sys/pci/ncrreg.h b/sys/pci/ncrreg.h
new file mode 100644
index 0000000..1a22aee
--- /dev/null
+++ b/sys/pci/ncrreg.h
@@ -0,0 +1,547 @@
+/**************************************************************************
+**
+**  $Id: ncrreg.h,v 2.3 94/10/09 21:10:34 wolf Oct11 $
+**
+**  Device driver for the   NCR 53C810   PCI-SCSI-Controller.
+**
+**  386bsd / FreeBSD / NetBSD
+**
+**-------------------------------------------------------------------------
+**
+**  Written for 386bsd and FreeBSD by
+**	wolf@dentaro.gun.de	Wolfgang Stanglmeier
+**	se@mi.Uni-Koeln.de	Stefan Esser
+**
+**  Ported to NetBSD by
+**	mycroft@gnu.ai.mit.edu
+**
+**-------------------------------------------------------------------------
+**
+** Copyright (c) 1994 Wolfgang Stanglmeier.  All rights reserved.
+**
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+**    notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+**    notice, this list of conditions and the following disclaimer in the
+**    documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+**    derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+***************************************************************************
+*/
+
+#ifndef __NCR_REG_H__
+#define __NCR_REG_H__
+
+
+/*-----------------------------------------------------------------
+**
+**	The ncr 53c810 register structure.
+**
+**-----------------------------------------------------------------
+*/
+
+struct ncr_reg {
+/*00*/  u_char    nc_scntl0;    /* full arb., ena parity, par->ATN  */
+
+/*01*/  u_char    nc_scntl1;    /* no reset                         */
+        #define   ISCON   0x10  /* connected to scsi		    */
+        #define   CRST    0x08  /* force reset                      */
+
+/*02*/  u_char    nc_scntl2;    /* no disconnect expected           */
+	#define   SDU     0x80  /* cmd: disconnect will raise error */
+	#define   CHM     0x40  /* sta: chained mode                */
+	#define   WSS     0x08  /* sta: wide scsi send           [W]*/
+	#define   WSR     0x01  /* sta: wide scsi received       [W]*/
+
+/*03*/  u_char    nc_scntl3;    /* cnf system clock dependent       */
+	#define   EWS     0x08  /* cmd: enable wide scsi         [W]*/
+
+/*04*/  u_char    nc_scid;	/* cnf host adapter scsi address    */
+	#define   RRE     0x40  /* r/w:e enable response to resel.  */
+	#define   SRE     0x20  /* r/w:e enable response to select  */
+
+/*05*/  u_char    nc_sxfer;	/* ### Sync speed and count         */
+
+/*06*/  u_char    nc_sdid;	/* ### Destination-ID               */
+
+/*07*/  u_char    nc_gpreg;	/* ??? IO-Pins                      */
+
+/*08*/  u_char    nc_sfbr;	/* ### First byte in phase          */
+
+/*09*/  u_char    nc_socl;
+	#define   CREQ	  0x80	/* r/w: SCSI-REQ                    */
+	#define   CACK	  0x40	/* r/w: SCSI-ACK                    */
+	#define   CBSY	  0x20	/* r/w: SCSI-BSY                    */
+	#define   CSEL	  0x10	/* r/w: SCSI-SEL                    */
+	#define   CATN	  0x08	/* r/w: SCSI-ATN                    */
+	#define   CMSG	  0x04	/* r/w: SCSI-MSG                    */
+	#define   CC_D	  0x02	/* r/w: SCSI-C_D                    */
+	#define   CI_O	  0x01	/* r/w: SCSI-I_O                    */
+
+/*0a*/  u_char    nc_ssid;
+
+/*0b*/  u_char    nc_sbcl;
+
+/*0c*/  u_char    nc_dstat;
+        #define   DFE     0x80  /* sta: dma fifo empty              */
+        #define   MDPE    0x40  /* int: master data parity error    */
+        #define   BF      0x20  /* int: script: bus fault           */
+        #define   ABRT    0x10  /* int: script: command aborted     */
+        #define   SSI     0x08  /* int: script: single step         */
+        #define   SIR     0x04  /* int: script: interrupt instruct. */
+        #define   IID     0x01  /* int: script: illegal instruct.   */
+
+/*0d*/  u_char    nc_sstat0;
+        #define   ILF     0x80  /* sta: data in SIDL register lsb   */
+        #define   ORF     0x40  /* sta: data in SODR register lsb   */
+        #define   OLF     0x20  /* sta: data in SODL register lsb   */
+        #define   AIP     0x10  /* sta: arbitration in progress     */
+        #define   LOA     0x08  /* sta: arbitration lost            */
+        #define   WOA     0x04  /* sta: arbitration won             */
+        #define   IRST    0x02  /* sta: scsi reset signal           */
+        #define   SDP     0x01  /* sta: scsi parity signal          */
+
+/*0e*/  u_char    nc_sstat1;
+	#define   FF3210  0xf0	/* sta: bytes in the scsi fifo      */
+
+/*0f*/  u_char    nc_sstat2;
+        #define   ILF1    0x80  /* sta: data in SIDL register msb[W]*/
+        #define   ORF1    0x40  /* sta: data in SODR register msb[W]*/
+        #define   OLF1    0x20  /* sta: data in SODL register msb[W]*/
+
+/*10*/  u_long    nc_dsa;	/* --> Base page                    */
+
+/*14*/  u_char    nc_istat;	/* --> Main Command and status      */
+        #define   CABRT   0x80  /* cmd: abort current operation     */
+        #define   SRST    0x40  /* mod: reset chip                  */
+        #define   SIGP    0x20  /* r/w: message from host to ncr    */
+        #define   SEM     0x10  /* r/w: message between host + ncr  */
+        #define   CON     0x08  /* sta: connected to scsi           */
+        #define   INTF    0x04  /* sta: int on the fly (reset by wr)*/
+        #define   SIP     0x02  /* sta: scsi-interrupt              */
+        #define   DIP     0x01  /* sta: host/script interrupt       */
+
+/*15*/  u_char    nc_15_;
+/*16*/	u_char	  nc_16_;
+/*17*/  u_char    nc_17_;
+
+/*18*/	u_char	  nc_ctest0;
+/*19*/  u_char    nc_ctest1;
+
+/*1a*/  u_char    nc_ctest2;
+	#define   CSIGP   0x40
+
+/*1b*/  u_char    nc_ctest3;
+	#define   CLF	  0x04	/* clear scsi fifo		    */
+
+/*1c*/  u_long    nc_temp;	/* ### Temporary stack              */
+
+/*20*/	u_char	  nc_dfifo;
+/*21*/  u_char    nc_ctest4;
+/*22*/  u_char    nc_ctest5;
+/*23*/  u_char    nc_ctest6;
+
+/*24*/  u_long    nc_dbc;	/* ### Byte count and command       */
+/*28*/  u_long    nc_dnad;	/* ### Next command register        */
+/*2c*/  u_long    nc_dsp;	/* --> Script Pointer               */
+/*30*/  u_long    nc_dsps;	/* --> Script pointer save/opcode#2 */
+/*34*/  u_long    nc_scratcha;  /* ??? Temporary register a         */
+
+/*38*/  u_char    nc_dmode;
+/*39*/  u_char    nc_dien;
+/*3a*/  u_char    nc_dwt;
+
+/*3b*/  u_char    nc_dcntl;	/* --> Script execution control     */
+        #define   SSM     0x10  /* mod: single step mode            */
+        #define   STD     0x04  /* cmd: start dma mode              */
+	#define	  NOCOM   0x01	/* cmd: protect sfbr while reselect */
+
+/*3c*/  u_long    nc_adder;
+
+/*40*/  u_short   nc_sien;	/* -->: interrupt enable            */
+/*42*/  u_short   nc_sist;	/* <--: interrupt status            */
+        #define   STO     0x0400/* sta: timeout (select)            */
+        #define   GEN     0x0200/* sta: timeout (general)           */
+        #define   HTH     0x0100/* sta: timeout (handshake)         */
+        #define   MA      0x80  /* sta: phase mismatch              */
+        #define   CMP     0x40  /* sta: arbitration complete        */
+        #define   SEL     0x20  /* sta: selected by another device  */
+        #define   RSL     0x10  /* sta: reselected by another device*/
+        #define   SGE     0x08  /* sta: gross error (over/underflow)*/
+        #define   UDC     0x04  /* sta: unexpected disconnect       */
+        #define   RST     0x02  /* sta: scsi bus reset detected     */
+        #define   PAR     0x01  /* sta: scsi parity error           */
+
+/*44*/  u_char    nc_slpar;
+/*45*/  u_char    nc_swide;
+/*46*/  u_char    nc_macntl;
+/*47*/  u_char    nc_gpcntl;
+/*48*/  u_char    nc_stime0;    /* cmd: timeout for select&handshake*/
+/*49*/  u_char    nc_stime1;    /* cmd: timeout user defined        */
+/*4a*/  u_short   nc_respid;    /* sta: Reselect-IDs                */
+
+/*4c*/  u_char    nc_stest0;
+
+/*4d*/  u_char    nc_stest1;
+
+/*4e*/  u_char    nc_stest2;
+	#define   ROF     0x40	/* reset scsi offset (after gross error!) */
+	#define   EXT     0x02  /* extended filtering                     */
+
+/*4f*/  u_char    nc_stest3;
+	#define   TE     0x80	/* c: tolerAnt enable */
+	#define   CSF    0x02	/* c: clear scsi fifo */
+
+/*50*/  u_short   nc_sidl;	/* Lowlevel: latched from scsi data */
+/*52*/  u_short   nc_52_;
+/*54*/  u_short   nc_sodl;	/* Lowlevel: data out to scsi data  */
+/*56*/  u_short   nc_56_;
+/*58*/  u_short   nc_sbdl;	/* Lowlevel: data from scsi data    */
+/*5a*/  u_short   nc_5a_;
+/*5c*/  u_char    nc_scr0;	/* Working register B               */
+/*5d*/  u_char    nc_scr1;	/*                                  */
+/*5e*/  u_char    nc_scr2;	/*                                  */
+/*5f*/  u_char    nc_scr3;	/*                                  */
+/*60*/
+};
+
+/*-----------------------------------------------------------
+**
+**	Utility macros for the script.
+**
+**-----------------------------------------------------------
+*/
+
+#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
+#define REG(r) REGJ (nc_, r)
+
+#ifndef TARGET_MODE
+#define TARGET_MODE 0
+#endif
+
+typedef unsigned long ncrcmd;
+
+/*-----------------------------------------------------------
+**
+**	SCSI phases
+**
+**-----------------------------------------------------------
+*/
+
+#define	SCR_DATA_OUT	0x00000000
+#define	SCR_DATA_IN	0x01000000
+#define	SCR_COMMAND	0x02000000
+#define	SCR_STATUS	0x03000000
+#define SCR_ILG_OUT	0x04000000
+#define SCR_ILG_IN	0x05000000
+#define SCR_MSG_OUT	0x06000000
+#define SCR_MSG_IN      0x07000000
+
+/*-----------------------------------------------------------
+**
+**	Data transfer via SCSI.
+**
+**-----------------------------------------------------------
+**
+**	MOVE_ABS (LEN)
+**	<<start address>>
+**
+**	MOVE_IND (LEN)
+**	<<dnad_offset>>
+**
+**	MOVE_TBL
+**	<<dnad_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_MOVE_ABS(l) ((0x08000000 ^ (TARGET_MODE << 1ul)) | (l))
+#define SCR_MOVE_IND(l) ((0x28000000 ^ (TARGET_MODE << 1ul)) | (l))
+#define SCR_MOVE_TBL     (0x18000000 ^ (TARGET_MODE << 1ul))
+
+struct scr_tblmove {
+        u_long  size;
+        u_long  addr;
+};
+
+/*-----------------------------------------------------------
+**
+**	Selection
+**
+**-----------------------------------------------------------
+**
+**	SEL_ABS | SCR_ID (0..7)     [ | REL_JMP]
+**	<<alternate_address>>
+**
+**	SEL_TBL | << dnad_offset>>  [ | REL_JMP]
+**	<<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define	SCR_SEL_ABS	0x40000000
+#define	SCR_SEL_ABS_ATN	0x41000000
+#define	SCR_SEL_TBL	0x42000000
+#define	SCR_SEL_TBL_ATN	0x43000000
+
+struct scr_tblsel {
+        u_char  sel_0;
+        u_char  sel_sxfer;
+        u_char  sel_id;
+        u_char  sel_scntl3;
+};
+
+#define SCR_JMP_REL     0x04000000
+#define SCR_ID(id)	(((u_long)(id)) << 16)
+
+/*-----------------------------------------------------------
+**
+**	Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+**	WAIT_DISC
+**	dummy: <<alternate_address>>
+**
+**	WAIT_RESEL
+**	<<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define	SCR_WAIT_DISC	0x48000000
+#define SCR_WAIT_RESEL  0x50000000
+
+/*-----------------------------------------------------------
+**
+**	Bit Set / Reset
+**
+**-----------------------------------------------------------
+**
+**	SET (flags {|.. })
+**
+**	CLR (flags {|.. })
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SET(f)     (0x58000000 | (f))
+#define SCR_CLR(f)     (0x60000000 | (f))
+
+#define	SCR_CARRY	0x00000400
+#define	SCR_TRG		0x00000200
+#define	SCR_ACK		0x00000040
+#define	SCR_ATN		0x00000008
+
+
+
+
+/*-----------------------------------------------------------
+**
+**	Memory to memory move
+**
+**-----------------------------------------------------------
+**
+**	COPY (bytecount)
+**	<< source_address >>
+**	<< destination_address >>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_COPY(n) (0xc0000000 | (n))
+
+/*-----------------------------------------------------------
+**
+**	Register move and binary operations
+**
+**-----------------------------------------------------------
+**
+**	SFBR_REG (reg, op, data)        reg  = SFBR op data
+**	<< 0 >>
+**
+**	REG_SFBR (reg, op, data)        SFBR = reg op data
+**	<< 0 >>
+**
+**	REG_REG  (reg, op, data)        reg  = reg op data
+**	<< 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS(ofs) ((ofs) << 16ul)
+
+#define SCR_SFBR_REG(reg,op,data) \
+        (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
+
+#define SCR_REG_SFBR(reg,op,data) \
+        (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
+
+#define SCR_REG_REG(reg,op,data) \
+        (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
+
+
+#define      SCR_LOAD   0x00000000
+#define      SCR_SHL    0x01000000
+#define      SCR_OR     0x02000000
+#define      SCR_XOR    0x03000000
+#define      SCR_AND    0x04000000
+#define      SCR_SHR    0x05000000
+#define      SCR_ADD    0x06000000
+#define      SCR_ADDC   0x07000000
+
+/*-----------------------------------------------------------
+**
+**	FROM_REG (reg)		  reg  = SFBR
+**	<< 0 >>
+**
+**	TO_REG	 (reg)		  SFBR = reg
+**	<< 0 >>
+**
+**	LOAD_REG (reg, data)	  reg  = <data>
+**	<< 0 >>
+**
+**	LOAD_SFBR(data) 	  SFBR = <data>
+**	<< 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define	SCR_FROM_REG(reg) \
+	SCR_REG_SFBR(reg,SCR_OR,0)
+
+#define	SCR_TO_REG(reg) \
+	SCR_SFBR_REG(reg,SCR_OR,0)
+
+#define	SCR_LOAD_REG(reg,data) \
+	SCR_REG_REG(reg,SCR_LOAD,data)
+
+#define SCR_LOAD_SFBR(data) \
+        (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
+
+/*-----------------------------------------------------------
+**
+**	Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+**	JUMP            [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<address>>
+**
+**	JUMPR           [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<distance>>
+**
+**	CALL            [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<address>>
+**
+**	CALLR           [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<distance>>
+**
+**	RETURN          [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<dummy>>
+**
+**	INT             [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<ident>>
+**
+**	INT_FLY         [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<ident>>
+**
+**	Conditions:
+**	     WHEN (phase)
+**	     IF   (phase)
+**	     CARRY
+**	     DATA (data, mask)
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_JUMP        0x80080000
+#define SCR_JUMPR       0x80880000
+#define SCR_CALL        0x88080000
+#define SCR_CALLR       0x88880000
+#define SCR_RETURN      0x90080000
+#define SCR_INT         0x98080000
+#define SCR_INT_FLY     0x98180000
+
+#define IFFALSE(arg)   (0x00080000 | (arg))
+#define IFTRUE(arg)    (0x00000000 | (arg))
+
+#define WHEN(phase)    (0x00030000 | (phase))
+#define IF(phase)      (0x00020000 | (phase))
+
+#define DATA(D)        (0x00040000 | ((D) & 0xff))
+#define MASK(D,M)      (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
+
+#define CARRYSET       (0x00200000)
+
+/*-----------------------------------------------------------
+**
+**	SCSI  constants.
+**
+**-----------------------------------------------------------
+*/
+
+/*
+**	Messages
+*/
+
+#define	M_COMPLETE	(0x00)
+#define	M_EXTENDED	(0x01)
+#define	M_SAVE_DP	(0x02)
+#define	M_RESTORE_DP	(0x03)
+#define	M_DISCONNECT	(0x04)
+#define	M_ID_ERROR	(0x05)
+#define	M_ABORT		(0x06)
+#define	M_REJECT	(0x07)
+#define	M_NOOP		(0x08)
+#define	M_PARITY	(0x09)
+#define	M_LCOMPLETE	(0x0a)
+#define	M_FCOMPLETE	(0x0b)
+#define	M_RESET		(0x0c)
+#define	M_ABORT_TAG	(0x0d)
+#define	M_CLEAR_QUEUE	(0x0e)
+#define	M_INIT_REC	(0x0f)
+#define	M_REL_REC	(0x10)
+#define	M_TERMINATE	(0x11)
+#define	M_SIMPLE_TAG	(0x20)
+#define	M_HEAD_TAG	(0x21)
+#define	M_ORDERED_TAG	(0x22)
+#define	M_IGN_RESIDUE	(0x23)
+#define	M_IDENTIFY   	(0x80)
+
+#define	M_X_MODIFY_DP	(0x00)
+#define	M_X_SYNC_REQ	(0x01)
+#define	M_X_WIDE_REQ	(0x03)
+
+/*
+**	Status
+*/
+
+#define	S_GOOD		(0x00)
+#define	S_CHECK_COND	(0x02)
+#define	S_COND_MET	(0x04)
+#define	S_BUSY		(0x08)
+#define	S_INT		(0x10)
+#define	S_INT_COND_MET	(0x14)
+#define	S_CONFLICT	(0x18)
+#define	S_TERMINATED	(0x20)
+#define	S_QUEUE_FULL	(0x28)
+#define	S_ILLEGAL	(0xff)
+#define	S_SENSE		(0x80)
+
+#endif /*__NCR_REG_H__*/