Rename GENERIC98 to GENERIC.

1 files changed, 0 insertions, 320 deletions

diff --git a/sys/pc98/conf/GENERIC98 b/sys/pc98/conf/GENERIC98
deleted file mode 100644
index 693c5c0..0000000
--- a/sys/pc98/conf/GENERIC98
+++ /dev/null
@@ -1,320 +0,0 @@
-#
-# GENERIC -- Generic kernel configuration file for FreeBSD/pc98
-#
-# For more information on this file, please read the handbook section on
-# Kernel Configuration Files:
-#
-#    http://www.freebsd.org/handbook/kernelconfig-config.html
-#
-# The handbook is also available locally in /usr/share/doc/handbook
-# if you've installed the doc distribution, otherwise always see the
-# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
-# latest information.
-#
-# An exhaustive list of options and more detailed explanations of the
-# device lines is also present in the ./LINT configuration file. If you are
-# in doubt as to the purpose or necessity of a line, check first in LINT.
-#
-# $FreeBSD$
-
-machine		pc98
-cpu		I386_CPU
-cpu		I486_CPU
-cpu		I586_CPU
-cpu		I686_CPU
-ident		GENERIC98
-maxusers	32
-
-#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
-
-options 	PC98			#PC98
-options 	MATH_EMULATE		#Support for x87 emulation
-options 	INET			#InterNETworking
-options 	INET6			#IPv6 communications protocols
-options 	FFS			#Berkeley Fast Filesystem
-options 	FFS_ROOT		#FFS usable as root device [keep this!]
-options 	MFS			#Memory Filesystem
-options 	MD_ROOT			#MD is a potential root device
-options 	NFS			#Network Filesystem
-options 	NFS_ROOT		#NFS usable as root device, NFS required
-options 	MSDOSFS			#MSDOS Filesystem
-options 	CD9660			#ISO 9660 Filesystem
-options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
-options 	PROCFS			#Process filesystem
-options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
-options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
-options 	EPSON_BOUNCEDMA		#use bounce buufer for 15-16M
-#options 	EPSON_MEMWIN		#EPSON memory window support
-options 	UCONSOLE		#Allow users to grab the console
-#options 	LINE30
-options 	USERCONFIG		#boot -c editor
-options 	VISUAL_USERCONFIG	#visual boot -c editor
-options 	KTRACE			#ktrace(1) support
-options 	SYSVSHM			#SYSV-style shared memory
-options 	SYSVMSG			#SYSV-style message queues
-options 	SYSVSEM			#SYSV-style semaphores
-options 	P1003_1B		#Posix P1003_1B real-time extensions
-options 	_KPOSIX_PRIORITY_SCHEDULING
-options		ICMP_BANDLIM		#Rate limit bad replies
-
-# To make an SMP kernel, the next two are needed
-#options 	SMP			# Symmetric MultiProcessor Kernel
-#options 	APIC_IO			# Symmetric (APIC) I/O
-# Optionally these may need tweaked, (defaults shown):
-#options 	NCPU=2			# number of CPUs
-#options 	NBUS=4			# number of busses
-#options 	NAPIC=1			# number of IO APICs
-#options 	NINTR=24		# number of INTs
-
-device		isa
-device		pci
-options 	COMPAT_OLDISA		# Old ISA driver shims
-options 	COMPAT_OLDPCI		# Old PCI driver shims
-
-# Floppy drives
-device		fdc0	at isa? port IO_FD1 irq 11 drq 2
-device		fd0	at fdc0 drive 0
-device		fd1	at fdc0 drive 1
-device		fd2	at fdc0 drive 2
-device		fd3	at fdc0 drive 3
-
-# IDE controller and disks
-device		wdc0	at isa? port IO_WD1 irq 9
-device		wd0	at wdc0 drive 0
-#device		wd1	at wdc0 drive 1
-#device		wd2	at wdc0 drive 2
-#device		wd3	at wdc0 drive 3
-
-# ATAPI devices on wdc
-device		wcd		#IDE CD-ROM
-#device		wfd		#IDE Floppy (e.g. LS-120)
-#device		wst		#IDE Tape (e.g. Travan)
-
-# SCSI Controllers
-device		adv
-device		ahc		# AHA2940 and onboard AIC7xxx devices
-device		amd		# AMD 53C974 (Teckram DC-390(T))
-device		isp		# Qlogic family
-device		ncr		# NCR/Symbios Logic
-device		sym		# NCR/Symbios Logic (newer chipsets)
-
-#
-# WD33C93 SCSI card (55/92 like board)
-#
-
-options	BS_TARG_SAFEMODE
-
-# PC-9801-92
-device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0
-# SC-98
-# device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000
-# HA-55BS2 and later
-#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000
-# ELECOM type
-#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000
-# SMIT
-#device bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000
-# Logitec LHA-20x
-#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000
-
-# PC-9801-100
-device	aic0	at isa? port 0x1840 irq 5 flags 0x10000
-
-# SCSI peripherals
-device		scbus		# SCSI bus (required)
-device		da		# Direct Access (disks)
-device		sa		# Sequential Access (tape etc)
-device		cd		# CD
-device		pass		# Passthrough device (direct SCSI access)
-
-# RAID controllers
-device		amr		# AMI MegaRAID
-device		mlx		# Mylex DAC960 family
-
-# keyboard driver
-device		pckbd0	at isa? port IO_KBD irq 1
-#options 	KBD_INSTALL_CDEV
-
-device		gdc0	at isa?
-
-# splash screen/screen saver
-pseudo-device	splash
-
-# syscons is the default console driver, resembling an SCO console
-device		sc0	at isa?
-
-# Floating point support - do not disable.
-device		npx0	at nexus? port IO_NPX irq 8
-
-# Power management support (see LINT for more options)
-#device		apm0    at nexus? disable flags 0x20 # Advanced Power Management
-
-# PCCARD (PCMCIA) support
-device		card
-device		pcic0	at isa? irq 6 port 0x3e0
-
-# Serial (COM) ports
-#
-options 	COM_MULTIPORT
-#
-# COM1
-device		sio0	at isa? port IO_COM1 irq 4
-# COM2 (2nd CCU)
-device		sio1	at isa? port 0x238 irq 5 flags 0x12000010
-# PC-9861K, PC-9801-101, MDC-926Rs
-#device		sio1	at isa? port IO_COM2 irq 5 flags 0x01000000
-#device		sio2	at isa? port IO_COM3 irq 6 flags 0x02000000
-# PC-9801-120 (PnP off)
-#device		sio1	at isa? port 0x8b0 irq 5 flags 0x11000000
-# MC-16550II, MC-RS98
-#device		sio1	at isa? port 0xd2 irq 5 flags 0x14000101
-#device		sio2	at isa? port 0x8d2 flags 0x14000101
-# RSB-2000, RSB-3000, B98-02
-#device		sio1	at isa? port 0xb0 flags 0x15000101
-#device		sio2	at isa? port 0xb1 flags 0x15000101
-# RSB-384
-#device		sio1	at isa? port 0xb0 flags 0x16000000
-#device		sio2	at isa? port 0xb1 flags 0x16000000
-# RSA-98III
-#device		sio1	at isa? port 0x50e0 irq 5 flags 0x18000101
-#device		sio2	at isa? port 0x51e0 flags 0x18000101
-# ESP98
-#options 	COM_ESP
-#device		sio1	at isa? port 0x18b0 irq 5 flags 0x19000000
-
-device		mse0	at isa? port IO_MSE irq 13
-
-# NEW Parallel port
-device		ppc0	at isa? irq 14
-device		ppbus		# Parallel port bus (required)
-device		lpt		# Printer
-device		plip		# TCP/IP over parallel
-device		ppi		# Parallel port interface device
-#device		vpo		# Requires scbus and da
-# OLD Parallel port
-# Please stay olpt driver after ppc driver
-device		olpt0	at isa? port IO_LPT
-
-
-# PCI Ethernet NICs.
-device		de		# DEC/Intel DC21x4x (``Tulip'')
-device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
-device		tx		# SMC 9432TX (83c170 ``EPIC'')
-device		vx		# 3Com 3c590, 3c595 (``Vortex'')
-device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')
-
-# PCI Ethernet NICs that use the common MII bus controller code.
-device		miibus		# MII bus support
-device		dc		# DEC/Intel 21143 and various workalikes
-device		rl		# RealTek 8129/8139
-device		sf		# Adaptec AIC-6915 (``Starfire'')
-device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
-device		ste		# Sundance ST201 (D-Link DFE-550TX)
-device		tl		# Texas Instruments ThunderLAN
-device		vr		# VIA Rhine, Rhine II
-device		wb		# Winbond W89C840F
-device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
-
-# ISA Ethernet NICs.
-#
-# DP8390 NIC
-#
-# ed0: generic driver/EtherEZ98
-# ed1: LANEED LD-BDN
-# ed2: EGY-98
-# ed3: LGY-98
-# ed4: ICM-IF-2766/EN-2298-T
-# ed5: SIC-98
-# ed6: PC-9801-108
-# ed7: LA-98
-# ed8: C-NET(98)
-# ed9: C-NET(98)E/L
-# ed10: EC/EP-98X
-# ed11: SIU-98-D
-#
-#device ed0 at isa? port 0x00d0 irq 6
-##device ed0 at isa? port 0x10d0 irq 6 iomem 0xc8000    # SMC EtherEZ98
-#device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000
-#device ed1 at isa? port 0x00d8 irq 6 flags 0x200000
-#device ed3 at isa? port 0x00d0 irq 6 flags 0x400000
-#device ed4 at isa? port 0x56d0 irq 5 flags 0x500000
-#device ed2 at isa? port 0x00d8 irq 6 flags 0x300000
-#device ed7 at isa? port 0x00d0 irq 6 flags 0x900000
-#device ed6 at isa? port 0x0770 irq 6 flags 0x800000
-#device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000
-#device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000
-#device ed10 at isa? port 0x00d0 irq 3 flags 0xd10000
-#device ed11 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 32768 flags 0x610000
-#
-# MB86960A NIC
-#
-# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98
-# fe1: C-NET(98)P2/C-NET(9N)E
-#
-# FE_8BIT_SUPPORT is needed to support LAC-98
-#
-options 	FE_8BIT_SUPPORT		# LAC-98 support
-device		fe0	at isa? port 0x00d0 irq 3
-device		fe1	at isa? port 0x73d0 irq 5
-
-device		ep0	at isa? port 0x40d0 irq 3
-device		lnc0	at isa? port 0x03d0 irq 6
-
-# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
-# exists only as a PCMCIA device, so there is no ISA attatement needed
-# and resources will always be dynamically assigned by the pccard code.
-device		wi
-
-# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
-# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
-# mode (the factory default). If you set the switches on your ISA
-# card for a manually chosen I/O address and IRQ, you must specify
-# those paremeters here.
-device		an
-
-# requires PCCARD (PCMCIA) support to be activated
-device		sn
-#device		xe0	at isa?
-
-#device	snd
-#device	sb0	at isa? port 0x20d2 irq 10 drq 3
-#device	sbxvi0 	at isa? drq 3
-#device	sbmidi0	at isa? port 0x80d2
-#device	opl0	at isa? port 0x28d2
-#device	nss0	at isa? port 0xa460 irq 12
-#device	mss0	at isa? port 0xf40 irq 12 drq 1
-#device	mpu0	at isa? port 0xe0d0 irq 6
-
-#device	joy0	at isa? port 0x04d2
-
-# Pseudo devices - the number indicates how many units to allocated.
-pseudo-device	loop		# Network loopback
-pseudo-device	ether		# Ethernet support
-pseudo-device	sl	1	# Kernel SLIP
-pseudo-device	ppp	1	# Kernel PPP
-pseudo-device	tun		# Packet tunnel.
-pseudo-device	pty		# Pseudo-ttys (telnet etc)
-pseudo-device	md		# Memory "disks"
-pseudo-device	gif	4	# IPv6 and IPv4 tunneling
-pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)
-
-# The `bpf' pseudo-device enables the Berkeley Packet Filter.
-# Be aware of the administrative consequences of enabling this!
-pseudo-device	bpf		#Berkeley packet filter
-
-#pseudo-device	compat_atdisk	#IBM-PC HDD support
-
-# USB support
-#device		uhci		# UHCI PCI->USB interface
-#device		ohci		# OHCI PCI->USB interface
-#device		usb		# USB Bus (required)
-#device		ugen		# Generic
-#device		uhid		# "Human Interface Devices"
-#device		ukbd		# Keyboard
-#device		ulpt		# Printer
-#device		umass		# Disks/Mass storage - Requires scbus and da
-#device		ums		# Mouse
-# USB Ethernet, requires mii
-#device		aue		# ADMtek USB ethernet
-#device		cue		# CATC USB ethernet
-#device		kue		# Kawasaki LSI USB ethernet