diff options
author | jhb <jhb@FreeBSD.org> | 2004-02-18 22:40:23 +0000 |
---|---|---|
committer | jhb <jhb@FreeBSD.org> | 2004-02-18 22:40:23 +0000 |
commit | 87d8124455b0c3ccec6100495636ecab6282e758 (patch) | |
tree | 1d0b0f6e8f61c8700c371e9e3dbd61c52c200ba4 /sys/i386 | |
parent | c36749b9a5a6e643d181047dcaf85e566656d15b (diff) | |
download | FreeBSD-src-87d8124455b0c3ccec6100495636ecab6282e758.zip FreeBSD-src-87d8124455b0c3ccec6100495636ecab6282e758.tar.gz |
Rework the $PIR (aka PCIBIOS) PCI interrupt routing code and split it off
into its own file:
- All of the $PIR interrupt routing is now done in a link-centric fashion.
When a host-PCI bridge that uses the $PIR attaches, it calls pir_parse()
to parse the table. This scans for link devices and merges all the masks
for each link device from the table entries. It then looks at the intline
register of PCI devices connected to a link to figure out if the BIOS has
routed this link and if so to which IRQ.
- The IRQ for any given link can be overridden via a hint like so:
'hw.pci.link.0x62.irq=10' Any IRQ set in this matter is treated as if it
were set that way by the BIOS.
- We only call the BIOS to route each link device once.
- When a PCI device wants to route an interrupt, we look it up in the $PIR
to find the associated link. If the link is routed, we simply return the
IRQ it is using. If it is not routed, we have to pick one. This uses a
different algorithm from the old code. First off, when we try to pick
an interrupt from a mask of possible interrupts, we try to pick the one
that is least loaded as far as PCI devices. We maintain this weight based
on the number of devices attached to each link device. When choosing an
IRQ, we first attempt to route using any PCI only interrupts (the old
code did this as well). If that doesn't work, we try to use the list of
IRQs that the BIOS has used. This is a new step that the new code didn't
do and avoids using IRQ 3 or 4 for every virgin interrupt routing. If
none of the IRQs that the BIOS used worked, then we fall back to trying
anything.
- The fallback mask for !PC98 was fixed to include IRQ 3 and not allow IRQ
2.
- We don't use the $PIR to route interrupts on a PCI-PCI bridge unless it
has already been used to route on at least one Host-PCI bridge. This
helps to avoid mixing and matching x86 firmware PCI interrupt routing
methods (which is a Bad Thing(tm)).
Silence on: current@
Diffstat (limited to 'sys/i386')
-rw-r--r-- | sys/i386/pci/pci_pir.c | 1054 |
1 files changed, 445 insertions, 609 deletions
diff --git a/sys/i386/pci/pci_pir.c b/sys/i386/pci/pci_pir.c index 0e3b8c3..ea924a8 100644 --- a/sys/i386/pci/pci_pir.c +++ b/sys/i386/pci/pci_pir.c @@ -2,6 +2,7 @@ * Copyright (c) 1997, Stefan Esser <se@freebsd.org> * Copyright (c) 2000, Michael Smith <msmith@freebsd.org> * Copyright (c) 2000, BSDi + * Copyright (c) 2004, John Baldwin <jhb@FreeBSD.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -29,59 +30,81 @@ #include <sys/cdefs.h> __FBSDID("$FreeBSD$"); -#include <sys/param.h> /* XXX trim includes */ +#include <sys/param.h> #include <sys/systm.h> #include <sys/bus.h> #include <sys/kernel.h> -#include <sys/module.h> #include <sys/malloc.h> -#include <sys/lock.h> -#include <sys/mutex.h> #include <sys/sysctl.h> #include <vm/vm.h> #include <vm/pmap.h> #include <machine/md_var.h> #include <dev/pci/pcivar.h> #include <dev/pci/pcireg.h> -#include <isa/isavar.h> #include <machine/pci_cfgreg.h> #include <machine/segments.h> #include <machine/pc/bios.h> -#include "pcib_if.h" +#define NUM_ISA_INTERRUPTS 16 -#define PRVERB(a) do { \ - if (bootverbose) \ - printf a ; \ -} while(0) - -static int cfgmech; -static int devmax; - -static int pci_cfgintr_valid(struct PIR_entry *pe, int pin, int irq); -static int pci_cfgintr_unique(struct PIR_entry *pe, int pin); -static int pci_cfgintr_linked(struct PIR_entry *pe, int pin); -static int pci_cfgintr_search(struct PIR_entry *pe, int bus, int device, int matchpin, int pin); -static int pci_cfgintr_virgin(struct PIR_entry *pe, int pin); +/* + * A link device. Loosely based on the ACPI PCI link device. This doesn't + * try to support priorities for different ISA interrupts. + */ +struct pci_link { + TAILQ_ENTRY(pci_link) pl_links; + uint8_t pl_id; + uint8_t pl_irq; + uint16_t pl_irqmask; + int pl_references; + int pl_routed; +}; + +struct pci_link_lookup { + struct pci_link **pci_link_ptr; + int bus; + int device; + int pin; +}; + +typedef void pir_entry_handler(struct PIR_entry *entry, + struct PIR_intpin* intpin, void *arg); static void pci_print_irqmask(u_int16_t irqs); -static void pci_print_route_table(struct PIR_table *prt, int size); -static int pcireg_cfgread(int bus, int slot, int func, int reg, int bytes); -static void pcireg_cfgwrite(int bus, int slot, int func, int reg, int data, int bytes); -static int pcireg_cfgopen(void); +static int pci_pir_biosroute(int bus, int device, int func, int pin, + int irq); +static int pci_pir_choose_irq(struct pci_link *pci_link, int irqmask); +static void pci_pir_create_links(struct PIR_entry *entry, + struct PIR_intpin *intpin, void *arg); +static void pci_pir_dump_links(void); +static struct pci_link *pci_pir_find_link(uint8_t link_id); +static void pci_pir_find_link_handler(struct PIR_entry *entry, + struct PIR_intpin *intpin, void *arg); +static void pci_pir_initial_irqs(struct PIR_entry *entry, + struct PIR_intpin *intpin, void *arg); +static void pci_pir_print_intpin(struct PIR_entry *entry, + struct PIR_intpin *intpin, void *arg); +static void pci_pir_print_table(void); +static uint8_t pci_pir_search_irq(int bus, int device, int pin); +static int pci_pir_valid_irq(struct pci_link *pci_link, int irq); +static void pci_pir_walk_table(pir_entry_handler *handler, void *arg); + +MALLOC_DEFINE(M_PIR, "$PIR", "$PIR structures"); static struct PIR_table *pci_route_table; -static int pci_route_count; - -static struct mtx pcicfg_mtx; +static int pci_route_count, pir_bios_irqs, pir_parsed; +static TAILQ_HEAD(, pci_link) pci_links; +static int pir_interrupt_weight[NUM_ISA_INTERRUPTS]; /* sysctl vars */ SYSCTL_DECL(_hw_pci); #ifdef PC98 +/* IRQs 3, 5, 7, 9, 10, 11, 12, 13 */ #define PCI_IRQ_OVERRIDE_MASK 0x3e68 #else -#define PCI_IRQ_OVERRIDE_MASK 0xdef4 +/* IRQs 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15 */ +#define PCI_IRQ_OVERRIDE_MASK 0xdef8 #endif static uint32_t pci_irq_override_mask = PCI_IRQ_OVERRIDE_MASK; @@ -91,409 +114,433 @@ SYSCTL_INT(_hw_pci, OID_AUTO, irq_override_mask, CTLFLAG_RDTUN, "Mask of allowed irqs to try to route when it has no good clue about\n" "which irqs it should use."); - /* - * Some BIOS writers seem to want to ignore the spec and put - * 0 in the intline rather than 255 to indicate none. Some use - * numbers in the range 128-254 to indicate something strange and - * apparently undocumented anywhere. Assume these are completely bogus - * and map them to 255, which means "none". + * Look for the interrupt routing table. + * + * We use PCI BIOS's PIR table if it's available. $PIR is the standard way + * to do this. Sadly, some machines are not standards conforming and have + * _PIR instead. We shrug and cope by looking for both. */ -static __inline__ int -pci_i386_map_intline(int line) +void +pci_pir_open(void) { - if (line == 0 || line >= 128) - return (PCI_INVALID_IRQ); - return (line); + struct PIR_table *pt; + uint32_t sigaddr; + int i; + uint8_t ck, *cv; + + /* Don't try if we've already found a table. */ + if (pci_route_table != NULL) + return; + + /* Look for $PIR and then _PIR. */ + sigaddr = bios_sigsearch(0, "$PIR", 4, 16, 0); + if (sigaddr == 0) + sigaddr = bios_sigsearch(0, "_PIR", 4, 16, 0); + if (sigaddr == 0) + return; + + /* If we found something, check the checksum and length. */ + /* XXX - Use pmap_mapdev()? */ + pt = (struct PIR_table *)(uintptr_t)BIOS_PADDRTOVADDR(sigaddr); + if (pt->pt_header.ph_length <= sizeof(struct PIR_header)) + return; + for (cv = (u_int8_t *)pt, ck = 0, i = 0; + i < (pt->pt_header.ph_length); i++) + ck += cv[i]; + if (ck != 0) + return; + + /* Ok, we've got a valid table. */ + pci_route_table = pt; + pci_route_count = (pt->pt_header.ph_length - + sizeof(struct PIR_header)) / + sizeof(struct PIR_entry); + printf("Found $PIR table, %d entries at %p\n", + pci_route_count, pci_route_table); + if (bootverbose) + pci_pir_print_table(); } -static u_int16_t -pcibios_get_version(void) +/* + * Find the pci_link structure for a given link ID. + */ +static struct pci_link * +pci_pir_find_link(uint8_t link_id) { - struct bios_regs args; + struct pci_link *pci_link; - if (PCIbios.ventry == 0) { - PRVERB(("pcibios: No call entry point\n")); - return (0); - } - args.eax = PCIBIOS_BIOS_PRESENT; - if (bios32(&args, PCIbios.ventry, GSEL(GCODE_SEL, SEL_KPL))) { - PRVERB(("pcibios: BIOS_PRESENT call failed\n")); - return (0); + TAILQ_FOREACH(pci_link, &pci_links, pl_links) { + if (pci_link->pl_id == link_id) + return (pci_link); } - if (args.edx != 0x20494350) { - PRVERB(("pcibios: BIOS_PRESENT didn't return 'PCI ' in edx\n")); - return (0); - } - return (args.ebx & 0xffff); + return (NULL); } -/* - * Initialise access to PCI configuration space +/* + * Find the link device associated with a PCI device in the table. */ -int -pci_cfgregopen(void) +static void +pci_pir_find_link_handler(struct PIR_entry *entry, struct PIR_intpin *intpin, + void *arg) { - static int opened = 0; - u_long sigaddr; - static struct PIR_table *pt; - u_int16_t v; - u_int8_t ck, *cv; - int i; - - if (opened) - return(1); + struct pci_link_lookup *lookup; - if (pcireg_cfgopen() == 0) - return(0); + lookup = (struct pci_link_lookup *)arg; + if (entry->pe_bus == lookup->bus && + entry->pe_device == lookup->device && + intpin - entry->pe_intpin == lookup->pin) + *lookup->pci_link_ptr = pci_pir_find_link(intpin->link); +} - v = pcibios_get_version(); - if (v > 0) - printf("pcibios: BIOS version %x.%02x\n", (v & 0xff00) >> 8, - v & 0xff); +/* + * Check to see if a possible IRQ setting is valid. + */ +static int +pci_pir_valid_irq(struct pci_link *pci_link, int irq) +{ - /* - * Look for the interrupt routing table. - * - * We use PCI BIOS's PIR table if it's available $PIR is the - * standard way to do this. Sadly, some machines are not - * standards conforming and have _PIR instead. We shrug and cope - * by looking for both. - */ - if (pcibios_get_version() >= 0x0210 && pt == NULL) { - sigaddr = bios_sigsearch(0, "$PIR", 4, 16, 0); - if (sigaddr == 0) - sigaddr = bios_sigsearch(0, "_PIR", 4, 16, 0); - if (sigaddr != 0) { - pt = (struct PIR_table *)(uintptr_t) - BIOS_PADDRTOVADDR(sigaddr); - for (cv = (u_int8_t *)pt, ck = 0, i = 0; - i < (pt->pt_header.ph_length); i++) { - ck += cv[i]; - } - if (ck == 0 && pt->pt_header.ph_length > - sizeof(struct PIR_header)) { - pci_route_table = pt; - pci_route_count = (pt->pt_header.ph_length - - sizeof(struct PIR_header)) / - sizeof(struct PIR_entry); - printf("Using $PIR table, %d entries at %p\n", - pci_route_count, pci_route_table); - if (bootverbose) - pci_print_route_table(pci_route_table, - pci_route_count); - } - } - } - mtx_init(&pcicfg_mtx, "pcicfg", NULL, MTX_SPIN); - opened = 1; - return(1); + if (!PCI_INTERRUPT_VALID(irq)) + return (0); + return (pci_link->pl_irqmask & (1 << irq)); } -/* - * Read configuration space register +/* + * Walk the $PIR executing the worker function for each valid intpin entry + * in the table. The handler is passed a pointer to both the entry and + * the intpin in the entry. */ -u_int32_t -pci_cfgregread(int bus, int slot, int func, int reg, int bytes) +static void +pci_pir_walk_table(pir_entry_handler *handler, void *arg) { - uint32_t line; + struct PIR_entry *entry; + struct PIR_intpin *intpin; + int i, pin; - /* - * Some BIOS writers seem to want to ignore the spec and put - * 0 in the intline rather than 255 to indicate none. The rest of - * the code uses 255 as an invalid IRQ. - */ - if (reg == PCIR_INTLINE && bytes == 1) { - line = pcireg_cfgread(bus, slot, func, PCIR_INTLINE, 1); - return (pci_i386_map_intline(line)); + entry = &pci_route_table->pt_entry[0]; + for (i = 0; i < pci_route_count; i++, entry++) { + intpin = &entry->pe_intpin[0]; + for (pin = 0; pin < 4; pin++, intpin++) + if (intpin->link != 0) + handler(entry, intpin, arg); } - return (pcireg_cfgread(bus, slot, func, reg, bytes)); } -/* - * Write configuration space register - */ -void -pci_cfgregwrite(int bus, int slot, int func, int reg, u_int32_t data, int bytes) +static void +pci_pir_create_links(struct PIR_entry *entry, struct PIR_intpin *intpin, + void *arg) { + struct pci_link *pci_link; - pcireg_cfgwrite(bus, slot, func, reg, data, bytes); + pci_link = pci_pir_find_link(intpin->link); + if (pci_link != NULL) { + pci_link->pl_references++; + if (intpin->irqs != pci_link->pl_irqmask) { + if (bootverbose) + printf( + "$PIR: Entry %d.%d.INT%c has different mask for link %#x, merging\n", + entry->pe_bus, entry->pe_device, + (intpin - entry->pe_intpin) + 'A', + pci_link->pl_id); + pci_link->pl_irqmask &= intpin->irqs; + } + } else { + pci_link = malloc(sizeof(struct pci_link), M_PIR, M_WAITOK); + pci_link->pl_id = intpin->link; + pci_link->pl_irqmask = intpin->irqs; + pci_link->pl_irq = PCI_INVALID_IRQ; + pci_link->pl_references = 1; + pci_link->pl_routed = 0; + TAILQ_INSERT_TAIL(&pci_links, pci_link, pl_links); + } } /* - * Route a PCI interrupt + * Look to see if any of the function on the PCI device at bus/device have + * an interrupt routed to intpin 'pin' by the BIOS. */ -int -pci_cfgintr(int bus, int device, int pin, int oldirq) +static uint8_t +pci_pir_search_irq(int bus, int device, int pin) { - struct PIR_entry *pe; - int i, irq; - struct bios_regs args; - u_int16_t v; - int already = 0; - int errok = 0; - - v = pcibios_get_version(); - if (v < 0x0210) { - PRVERB(( - "pci_cfgintr: BIOS %x.%02x doesn't support interrupt routing\n", - (v & 0xff00) >> 8, v & 0xff)); - return (PCI_INVALID_IRQ); - } - if ((bus < 0) || (bus > 255) || (device < 0) || (device > 255) || - (pin < 1) || (pin > 4)) - return(PCI_INVALID_IRQ); + uint32_t value; + uint8_t func, maxfunc; - /* - * Scan the entry table for a contender - */ - for (i = 0, pe = &pci_route_table->pt_entry[0]; i < pci_route_count; - i++, pe++) { - if ((bus != pe->pe_bus) || (device != pe->pe_device)) - continue; - /* - * A link of 0 means that this intpin is not connected to - * any other device's interrupt pins and is not connected to - * any of the Interrupt Router's interrupt pins, so we can't - * route it. - */ - if (pe->pe_intpin[pin - 1].link == 0) + /* See if we have a valid device at function 0. */ + value = pci_cfgregread(bus, device, 0, PCIR_HDRTYPE, 1); + if ((value & PCIM_HDRTYPE) > PCI_MAXHDRTYPE) + return (PCI_INVALID_IRQ); + if (value & PCIM_MFDEV) + maxfunc = PCI_FUNCMAX; + else + maxfunc = 0; + + /* Scan all possible functions at this device. */ + for (func = 0; func <= maxfunc; func++) { + value = pci_cfgregread(bus, device, func, PCIR_DEVVENDOR, 4); + if (value == 0xffffffff) continue; - - if (pci_cfgintr_valid(pe, pin, oldirq)) { - printf("pci_cfgintr: %d:%d INT%c BIOS irq %d\n", bus, - device, 'A' + pin - 1, oldirq); - return (oldirq); - } + value = pci_cfgregread(bus, device, func, PCIR_INTPIN, 1); /* - * We try to find a linked interrupt, then we look to see - * if the interrupt is uniquely routed, then we look for - * a virgin interrupt. The virgin interrupt should return - * an interrupt we can route, but if that fails, maybe we - * should try harder to route a different interrupt. - * However, experience has shown that that's rarely the - * failure mode we see. + * See if it uses the pin in question. Note that the passed + * in pin uses 0 for A, .. 3 for D whereas the intpin + * register uses 0 for no interrupt, 1 for A, .. 4 for D. */ - irq = pci_cfgintr_linked(pe, pin); - if (irq != PCI_INVALID_IRQ) - already = 1; - if (irq == PCI_INVALID_IRQ) { - irq = pci_cfgintr_unique(pe, pin); - if (irq != PCI_INVALID_IRQ) - errok = 1; - } - if (irq == PCI_INVALID_IRQ) - irq = pci_cfgintr_virgin(pe, pin); - if (irq == PCI_INVALID_IRQ) - break; - - /* - * Ask the BIOS to route the interrupt. If we picked an - * interrupt that failed, we should really try other - * choices that the BIOS offers us. - * - * For uniquely routed interrupts, we need to try - * to route them on some machines. Yet other machines - * fail to route, so we have to pretend that in that - * case it worked. Isn't pc hardware fun? - * - * NOTE: if we want to whack hardware to do this, then - * I think the right way to do that would be to have - * bridge drivers that do this. I'm not sure that the - * $PIR table would be valid for those interrupt - * routers. - */ - args.eax = PCIBIOS_ROUTE_INTERRUPT; - args.ebx = (bus << 8) | (device << 3); - /* pin value is 0xa - 0xd */ - args.ecx = (irq << 8) | (0xa + pin - 1); - if (!already && - bios32(&args, PCIbios.ventry, GSEL(GCODE_SEL, SEL_KPL)) && - !errok) { - PRVERB(("pci_cfgintr: ROUTE_INTERRUPT failed.\n")); - return(PCI_INVALID_IRQ); - } - printf("pci_cfgintr: %d:%d INT%c routed to irq %d\n", bus, - device, 'A' + pin - 1, irq); - return(irq); + if (value != pin + 1) + continue; + value = pci_cfgregread(bus, device, func, PCIR_INTLINE, 1); + if (bootverbose) + printf( + "$PIR: Found matching pin for %d.%d.INT%c at func %d: %d\n", + bus, device, pin + 'A', func, value); + if (value != PCI_INVALID_IRQ) + return (value); } - - PRVERB(("pci_cfgintr: can't route an interrupt to %d:%d INT%c\n", bus, - device, 'A' + pin - 1)); - return(PCI_INVALID_IRQ); + return (PCI_INVALID_IRQ); } /* - * Check to see if an existing IRQ setting is valid. + * Try to initialize IRQ based on this device's IRQ. */ -static int -pci_cfgintr_valid(struct PIR_entry *pe, int pin, int irq) +static void +pci_pir_initial_irqs(struct PIR_entry *entry, struct PIR_intpin *intpin, + void *arg) { - uint32_t irqmask; + struct pci_link *pci_link; + uint8_t irq, pin; - if (!PCI_INTERRUPT_VALID(irq)) - return (0); - irqmask = pe->pe_intpin[pin - 1].irqs; - if (irqmask & (1 << irq)) { - PRVERB(("pci_cfgintr_valid: BIOS irq %d is valid\n", irq)); - return (1); - } - return (0); + pin = intpin - entry->pe_intpin; + pci_link = pci_pir_find_link(intpin->link); + irq = pci_pir_search_irq(entry->pe_bus, entry->pe_device, pin); + if (irq == PCI_INVALID_IRQ) + return; + if (pci_pir_valid_irq(pci_link, irq)) { + if (pci_link->pl_irq == PCI_INVALID_IRQ) + pci_link->pl_irq = irq; + else if (pci_link->pl_irq != irq) + printf( + "$PIR: BIOS IRQ %d for %d.%d.INT%c does not match link %#x irq %d\n", + irq, entry->pe_bus, entry->pe_device, pin + 'A', + pci_link->pl_id, pci_link->pl_irq); + } else + printf( + "$PIR: BIOS IRQ %d for %d.%d.INT%c is not valid for link %#x\n", + irq, entry->pe_bus, entry->pe_device, pin + 'A', + pci_link->pl_id); } /* - * Look to see if the routing table claims this pin is uniquely routed. + * Parse $PIR to enumerate link devices and attempt to determine their + * initial state. This could perhaps be cleaner if we had drivers for the + * various interrupt routers as they could read the initial IRQ for each + * link. */ -static int -pci_cfgintr_unique(struct PIR_entry *pe, int pin) +void +pci_pir_parse(void) { - int irq; - uint32_t irqmask; - - irqmask = pe->pe_intpin[pin - 1].irqs; - if (irqmask != 0 && powerof2(irqmask)) { - irq = ffs(irqmask) - 1; - PRVERB(("pci_cfgintr_unique: hard-routed to irq %d\n", irq)); - return(irq); + char tunable_buffer[64]; + struct pci_link *pci_link; + int i, irq; + + /* Only parse once. */ + if (pir_parsed) + return; + pir_parsed = 1; + + /* Enumerate link devices. */ + TAILQ_INIT(&pci_links); + pci_pir_walk_table(pci_pir_create_links, NULL); + if (bootverbose) { + printf("$PIR: Links after initial probe:\n"); + pci_pir_dump_links(); } - return(PCI_INVALID_IRQ); -} -/* - * Look for another device which shares the same link byte and - * already has a unique IRQ, or which has had one routed already. - */ -static int -pci_cfgintr_linked(struct PIR_entry *pe, int pin) -{ - struct PIR_entry *oe; - struct PIR_intpin *pi; - int i, j, irq; + /* Check for unique IRQ masks. */ + TAILQ_FOREACH(pci_link, &pci_links, pl_links) { + if (pci_link->pl_irqmask != 0 && powerof2(pci_link->pl_irqmask)) + pci_link->pl_irq = ffs(pci_link->pl_irqmask) - 1; + } /* - * Scan table slots. + * Check to see if the BIOS has already routed any of the links by + * checking each device connected to each link to see if it has a + * valid IRQ. */ - for (i = 0, oe = &pci_route_table->pt_entry[0]; i < pci_route_count; - i++, oe++) { - /* scan interrupt pins */ - for (j = 0, pi = &oe->pe_intpin[0]; j < 4; j++, pi++) { - - /* don't look at the entry we're trying to match */ - if ((pe == oe) && (i == (pin - 1))) - continue; - /* compare link bytes */ - if (pi->link != pe->pe_intpin[pin - 1].link) - continue; - /* link destination mapped to a unique interrupt? */ - if (pi->irqs != 0 && powerof2(pi->irqs)) { - irq = ffs(pi->irqs) - 1; - PRVERB(("pci_cfgintr_linked: linked (%x) to hard-routed irq %d\n", - pi->link, irq)); - return(irq); - } - - /* - * look for the real PCI device that matches this - * table entry - */ - irq = pci_cfgintr_search(pe, oe->pe_bus, oe->pe_device, - j + 1, pin); - if (irq != PCI_INVALID_IRQ) - return(irq); + pci_pir_walk_table(pci_pir_initial_irqs, NULL); + if (bootverbose) { + printf("$PIR: Links after initial IRQ discovery:\n"); + pci_pir_dump_links(); + } + + /* + * Allow the user to override the IRQ for a given link device as + * long as the override is valid or is 255 or 0 to clear a preset + * IRQ. + */ + i = 0; + TAILQ_FOREACH(pci_link, &pci_links, pl_links) { + snprintf(tunable_buffer, sizeof(tunable_buffer), + "hw.pci.link.%#x.irq", pci_link->pl_id); + if (getenv_int(tunable_buffer, &irq) == 0) + continue; + if (irq == 0) + irq = PCI_INVALID_IRQ; + if (irq == PCI_INVALID_IRQ || + pci_pir_valid_irq(pci_link, irq)) { + pci_link->pl_irq = irq; + i = 1; } } - return(PCI_INVALID_IRQ); + if (bootverbose && i) { + printf("$PIR: Links after tunable overrides:\n"); + pci_pir_dump_links(); + } + + /* + * Build initial interrupt weights as well as bitmap of "known-good" + * IRQs that the BIOS has already used for PCI link devices. + */ + TAILQ_FOREACH(pci_link, &pci_links, pl_links) { + if (!PCI_INTERRUPT_VALID(pci_link->pl_irq)) + continue; + pir_bios_irqs |= 1 << pci_link->pl_irq; + pir_interrupt_weight[pci_link->pl_irq] += + pci_link->pl_references; + } + if (bootverbose) { + printf("$PIR: IRQs used by BIOS: "); + pci_print_irqmask(pir_bios_irqs); + printf("\n"); + printf("$PIR: Interrupt Weights:\n[ "); + for (i = 0; i < NUM_ISA_INTERRUPTS; i++) + printf(" %3d", i); + printf(" ]\n[ "); + for (i = 0; i < NUM_ISA_INTERRUPTS; i++) + printf(" %3d", pir_interrupt_weight[i]); + printf(" ]\n"); + } } /* - * Scan for the real PCI device at (bus)/(device) using intpin (matchpin) and - * see if it has already been assigned an interrupt. + * Use the PCI BIOS to route an interrupt for a given device. + * + * Input: + * AX = PCIBIOS_ROUTE_INTERRUPT + * BH = bus + * BL = device [7:3] / function [2:0] + * CH = IRQ + * CL = Interrupt Pin (0x0A = A, ... 0x0D = D) */ static int -pci_cfgintr_search(struct PIR_entry *pe, int bus, int device, int matchpin, int pin) +pci_pir_biosroute(int bus, int device, int func, int pin, int irq) { - devclass_t pci_devclass; - device_t *pci_devices; - int pci_count; - device_t *pci_children; - int pci_childcount; - device_t *busp, *childp; - int i, j, irq; + struct bios_regs args; - /* - * Find all the PCI busses. - */ - pci_count = 0; - if ((pci_devclass = devclass_find("pci")) != NULL) - devclass_get_devices(pci_devclass, &pci_devices, &pci_count); + args.eax = PCIBIOS_ROUTE_INTERRUPT; + args.ebx = (bus << 8) | (device << 3) | func; + args.ecx = (irq << 8) | (0xa + pin); + return (bios32(&args, PCIbios.ventry, GSEL(GCODE_SEL, SEL_KPL))); +} + + +/* + * Route a PCI interrupt using a link device from the $PIR. + */ +int +pci_pir_route_interrupt(int bus, int device, int func, int pin) +{ + struct pci_link_lookup lookup; + struct pci_link *pci_link; + int error, irq; + + if (pci_route_table == NULL) + return (PCI_INVALID_IRQ); + + /* Lookup link device for this PCI device/pin. */ + pci_link = NULL; + lookup.bus = bus; + lookup.device = device; + lookup.pin = pin - 1; + lookup.pci_link_ptr = &pci_link; + pci_pir_walk_table(pci_pir_find_link_handler, &lookup); + if (pci_link == NULL) { + printf("$PIR: No matching entry for %d.%d.INT%c\n", bus, + device, pin - 1 + 'A'); + return (PCI_INVALID_IRQ); + } /* - * Scan all the PCI busses/devices looking for this one. + * Pick a new interrupt if we don't have one already. We look for + * an interrupt from several different sets. First, we check the + * set of PCI only interrupts from the $PIR. Second, we check the + * set of known-good interrupts that the BIOS has already used. + * Lastly, we check the "all possible valid IRQs" set. */ - irq = PCI_INVALID_IRQ; - for (i = 0, busp = pci_devices; (i < pci_count) && (irq == PCI_INVALID_IRQ); - i++, busp++) { - pci_childcount = 0; - device_get_children(*busp, &pci_children, &pci_childcount); - - for (j = 0, childp = pci_children; j < pci_childcount; j++, - childp++) { - if ((pci_get_bus(*childp) == bus) && - (pci_get_slot(*childp) == device) && - (pci_get_intpin(*childp) == matchpin)) { - irq = pci_i386_map_intline(pci_get_irq(*childp)); - if (irq != PCI_INVALID_IRQ) - PRVERB(("pci_cfgintr_search: linked (%x) to configured irq %d at %d:%d:%d\n", - pe->pe_intpin[pin - 1].link, irq, - pci_get_bus(*childp), - pci_get_slot(*childp), - pci_get_function(*childp))); - break; - } + if (!PCI_INTERRUPT_VALID(pci_link->pl_irq)) { + irq = pci_pir_choose_irq(pci_link, + pci_route_table->pt_header.ph_pci_irqs); + if (!PCI_INTERRUPT_VALID(irq)) + irq = pci_pir_choose_irq(pci_link, pir_bios_irqs); + if (!PCI_INTERRUPT_VALID(irq)) + irq = pci_pir_choose_irq(pci_link, + pci_irq_override_mask); + if (!PCI_INTERRUPT_VALID(irq)) { + if (bootverbose) + printf( + "$PIR: Failed to route interrupt for %d:%d INT%c\n", + bus, device, pin - 1 + 'A'); + return (PCI_INVALID_IRQ); } - if (pci_children != NULL) - free(pci_children, M_TEMP); + pci_link->pl_irq = irq; } - if (pci_devices != NULL) - free(pci_devices, M_TEMP); - return(irq); + + /* Ask the BIOS to route this IRQ if we haven't done so already. */ + if (!pci_link->pl_routed) { + error = pci_pir_biosroute(bus, device, func, pin - 1, + pci_link->pl_irq); + + /* Ignore errors when routing a unique interrupt. */ + if (error && !powerof2(pci_link->pl_irqmask)) { + printf("$PIR: ROUTE_INTERRUPT failed.\n"); + return (PCI_INVALID_IRQ); + } + pci_link->pl_routed = 1; + } + printf("$PIR: %d:%d INT%c routed to irq %d\n", bus, device, + pin - 1 + 'A', pci_link->pl_irq); + return (pci_link->pl_irq); } /* - * Pick a suitable IRQ from those listed as routable to this device. + * Try to pick an interrupt for the specified link from the interrupts + * set in the mask. */ static int -pci_cfgintr_virgin(struct PIR_entry *pe, int pin) +pci_pir_choose_irq(struct pci_link *pci_link, int irqmask) { - int irq, ibit; - - /* - * first scan the set of PCI-only interrupts and see if any of these - * are routable - */ - for (irq = 0; irq < 16; irq++) { - ibit = (1 << irq); - - /* can we use this interrupt? */ - if ((pci_route_table->pt_header.ph_pci_irqs & ibit) && - (pe->pe_intpin[pin - 1].irqs & ibit)) { - PRVERB(("pci_cfgintr_virgin: using routable PCI-only interrupt %d\n", irq)); - return(irq); - } - } - - /* life is tough, so just pick an interrupt */ - for (irq = 0; irq < 16; irq++) { - ibit = (1 << irq); - if ((ibit & pci_irq_override_mask) == 0) + int i, irq, realmask; + + /* XXX: Need to have a #define of known bad IRQs to also mask out? */ + realmask = pci_link->pl_irqmask & irqmask; + if (realmask == 0) + return (PCI_INVALID_IRQ); + + /* Find IRQ with lowest weight. */ + irq = PCI_INVALID_IRQ; + for (i = 0; i < NUM_ISA_INTERRUPTS; i++) { + if (!(realmask & 1 << i)) continue; - if (pe->pe_intpin[pin - 1].irqs & ibit) { - PRVERB(("pci_cfgintr_virgin: using routable interrupt %d\n", irq)); - return(irq); - } + if (irq == PCI_INVALID_IRQ || + pir_interrupt_weight[i] < pir_interrupt_weight[irq]) + irq = i; + } + if (bootverbose && PCI_INTERRUPT_VALID(irq)) { + printf("$PIR: Found IRQ %d for link %#x from ", irq, + pci_link->pl_id); + pci_print_irqmask(realmask); + printf("\n"); } - return(PCI_INVALID_IRQ); + return (irq); } static void @@ -517,279 +564,68 @@ pci_print_irqmask(u_int16_t irqs) } /* + * Dump the contents of a single intpin entry to the console. + */ +static void +pci_pir_print_intpin(struct PIR_entry *entry, struct PIR_intpin *intpin, + void *arg) +{ + + if (entry->pe_slot == 0) + printf("embedded "); + else + printf("slot %-3d ", entry->pe_slot); + printf(" %3d %3d %c 0x%02x ", entry->pe_bus, entry->pe_device, + intpin - entry->pe_intpin + 'A', intpin->link); + pci_print_irqmask(intpin->irqs); + printf("\n"); +} + +/* * Dump the contents of a PCI BIOS Interrupt Routing Table to the console. */ static void -pci_print_route_table(struct PIR_table *prt, int size) +pci_pir_print_table(void) { - struct PIR_entry *entry; - struct PIR_intpin *intpin; - int i, pin; printf("PCI-Only Interrupts: "); - pci_print_irqmask(prt->pt_header.ph_pci_irqs); + pci_print_irqmask(pci_route_table->pt_header.ph_pci_irqs); printf("\nLocation Bus Device Pin Link IRQs\n"); - entry = &prt->pt_entry[0]; - for (i = 0; i < size; i++, entry++) { - intpin = &entry->pe_intpin[0]; - for (pin = 0; pin < 4; pin++, intpin++) - if (intpin->link != 0) { - if (entry->pe_slot == 0) - printf("embedded "); - else - printf("slot %-3d ", entry->pe_slot); - printf(" %3d %3d %c 0x%02x ", - entry->pe_bus, entry->pe_device, - 'A' + pin, intpin->link); - pci_print_irqmask(intpin->irqs); - printf("\n"); - } + pci_pir_walk_table(pci_pir_print_intpin, NULL); +} + +/* + * Display link devices. + */ +static void +pci_pir_dump_links(void) +{ + struct pci_link *pci_link; + + printf("Link IRQ Ref IRQs\n"); + TAILQ_FOREACH(pci_link, &pci_links, pl_links) { + printf("%#4x %3d %3d ", pci_link->pl_id, pci_link->pl_irq, + pci_link->pl_references); + pci_print_irqmask(pci_link->pl_irqmask); + printf("\n"); } } /* * See if any interrupts for a given PCI bus are routed in the PIR. Don't - * even bother looking if the BIOS doesn't support routing anyways. + * even bother looking if the BIOS doesn't support routing anyways. If we + * are probing a PCI-PCI bridge, then require_parse will be true and we should + * only succeed if a host-PCI bridge has already attached and parsed the PIR. */ int -pci_probe_route_table(int bus) +pci_pir_probe(int bus, int require_parse) { int i; - u_int16_t v; - v = pcibios_get_version(); - if (v < 0x0210) + if (pci_route_table == NULL || (require_parse && !pir_parsed)) return (0); for (i = 0; i < pci_route_count; i++) if (pci_route_table->pt_entry[i].pe_bus == bus) return (1); return (0); } - -/* - * Configuration space access using direct register operations - */ - -/* enable configuration space accesses and return data port address */ -static int -pci_cfgenable(unsigned bus, unsigned slot, unsigned func, int reg, int bytes) -{ - int dataport = 0; - - if (bus <= PCI_BUSMAX - && slot < devmax - && func <= PCI_FUNCMAX - && reg <= PCI_REGMAX - && bytes != 3 - && (unsigned) bytes <= 4 - && (reg & (bytes - 1)) == 0) { - switch (cfgmech) { - case 1: - outl(CONF1_ADDR_PORT, (1 << 31) - | (bus << 16) | (slot << 11) - | (func << 8) | (reg & ~0x03)); - dataport = CONF1_DATA_PORT + (reg & 0x03); - break; - case 2: - outb(CONF2_ENABLE_PORT, 0xf0 | (func << 1)); - outb(CONF2_FORWARD_PORT, bus); - dataport = 0xc000 | (slot << 8) | reg; - break; - } - } - return (dataport); -} - -/* disable configuration space accesses */ -static void -pci_cfgdisable(void) -{ - switch (cfgmech) { - case 1: - outl(CONF1_ADDR_PORT, 0); - break; - case 2: - outb(CONF2_ENABLE_PORT, 0); - outb(CONF2_FORWARD_PORT, 0); - break; - } -} - -static int -pcireg_cfgread(int bus, int slot, int func, int reg, int bytes) -{ - int data = -1; - int port; - - mtx_lock_spin(&pcicfg_mtx); - port = pci_cfgenable(bus, slot, func, reg, bytes); - if (port != 0) { - switch (bytes) { - case 1: - data = inb(port); - break; - case 2: - data = inw(port); - break; - case 4: - data = inl(port); - break; - } - pci_cfgdisable(); - } - mtx_unlock_spin(&pcicfg_mtx); - return (data); -} - -static void -pcireg_cfgwrite(int bus, int slot, int func, int reg, int data, int bytes) -{ - int port; - - mtx_lock_spin(&pcicfg_mtx); - port = pci_cfgenable(bus, slot, func, reg, bytes); - if (port != 0) { - switch (bytes) { - case 1: - outb(port, data); - break; - case 2: - outw(port, data); - break; - case 4: - outl(port, data); - break; - } - pci_cfgdisable(); - } - mtx_unlock_spin(&pcicfg_mtx); -} - -/* check whether the configuration mechanism has been correctly identified */ -static int -pci_cfgcheck(int maxdev) -{ - uint32_t id, class; - uint8_t header; - uint8_t device; - int port; - - if (bootverbose) - printf("pci_cfgcheck:\tdevice "); - - for (device = 0; device < maxdev; device++) { - if (bootverbose) - printf("%d ", device); - - port = pci_cfgenable(0, device, 0, 0, 4); - id = inl(port); - if (id == 0 || id == 0xffffffff) - continue; - - port = pci_cfgenable(0, device, 0, 8, 4); - class = inl(port) >> 8; - if (bootverbose) - printf("[class=%06x] ", class); - if (class == 0 || (class & 0xf870ff) != 0) - continue; - - port = pci_cfgenable(0, device, 0, 14, 1); - header = inb(port); - if (bootverbose) - printf("[hdr=%02x] ", header); - if ((header & 0x7e) != 0) - continue; - - if (bootverbose) - printf("is there (id=%08x)\n", id); - - pci_cfgdisable(); - return (1); - } - if (bootverbose) - printf("-- nothing found\n"); - - pci_cfgdisable(); - return (0); -} - -static int -pcireg_cfgopen(void) -{ - uint32_t mode1res, oldval1; - uint8_t mode2res, oldval2; - - oldval1 = inl(CONF1_ADDR_PORT); - - if (bootverbose) { - printf("pci_open(1):\tmode 1 addr port (0x0cf8) is 0x%08x\n", - oldval1); - } - - if ((oldval1 & CONF1_ENABLE_MSK) == 0) { - - cfgmech = 1; - devmax = 32; - - outl(CONF1_ADDR_PORT, CONF1_ENABLE_CHK); - DELAY(1); - mode1res = inl(CONF1_ADDR_PORT); - outl(CONF1_ADDR_PORT, oldval1); - - if (bootverbose) - printf("pci_open(1a):\tmode1res=0x%08x (0x%08lx)\n", - mode1res, CONF1_ENABLE_CHK); - - if (mode1res) { - if (pci_cfgcheck(32)) - return (cfgmech); - } - - outl(CONF1_ADDR_PORT, CONF1_ENABLE_CHK1); - mode1res = inl(CONF1_ADDR_PORT); - outl(CONF1_ADDR_PORT, oldval1); - - if (bootverbose) - printf("pci_open(1b):\tmode1res=0x%08x (0x%08lx)\n", - mode1res, CONF1_ENABLE_CHK1); - - if ((mode1res & CONF1_ENABLE_MSK1) == CONF1_ENABLE_RES1) { - if (pci_cfgcheck(32)) - return (cfgmech); - } - } - - oldval2 = inb(CONF2_ENABLE_PORT); - - if (bootverbose) { - printf("pci_open(2):\tmode 2 enable port (0x0cf8) is 0x%02x\n", - oldval2); - } - - if ((oldval2 & 0xf0) == 0) { - - cfgmech = 2; - devmax = 16; - - outb(CONF2_ENABLE_PORT, CONF2_ENABLE_CHK); - mode2res = inb(CONF2_ENABLE_PORT); - outb(CONF2_ENABLE_PORT, oldval2); - - if (bootverbose) - printf("pci_open(2a):\tmode2res=0x%02x (0x%02x)\n", - mode2res, CONF2_ENABLE_CHK); - - if (mode2res == CONF2_ENABLE_RES) { - if (bootverbose) - printf("pci_open(2a):\tnow trying mechanism 2\n"); - - if (pci_cfgcheck(16)) - return (cfgmech); - } - } - - cfgmech = 0; - devmax = 0; - return (cfgmech); -} - |