Unify local_apic.c for x86 archs,

1 files changed, 0 insertions, 1427 deletions

diff --git a/sys/i386/i386/local_apic.c b/sys/i386/i386/local_apic.c
deleted file mode 100644
index d894d32..0000000
--- a/sys/i386/i386/local_apic.c
+++ /dev/null
@@ -1,1427 +0,0 @@
-/*-
- * Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
- * Copyright (c) 1996, by Steve Passe
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. The name of the developer may NOT be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- * 3. Neither the name of the author nor the names of any co-contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Local APIC support on Pentium and later processors.
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD$");
-
-#include "opt_atpic.h"
-#include "opt_hwpmc_hooks.h"
-#include "opt_kdtrace.h"
-
-#include "opt_ddb.h"
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/bus.h>
-#include <sys/kernel.h>
-#include <sys/lock.h>
-#include <sys/mutex.h>
-#include <sys/pcpu.h>
-#include <sys/proc.h>
-#include <sys/sched.h>
-#include <sys/smp.h>
-
-#include <vm/vm.h>
-#include <vm/pmap.h>
-
-#include <machine/apicreg.h>
-#include <machine/cpu.h>
-#include <machine/cputypes.h>
-#include <machine/frame.h>
-#include <machine/intr_machdep.h>
-#include <machine/apicvar.h>
-#include <machine/md_var.h>
-#include <machine/smp.h>
-#include <machine/specialreg.h>
-
-#ifdef DDB
-#include <sys/interrupt.h>
-#include <ddb/ddb.h>
-#endif
-
-#ifdef KDTRACE_HOOKS
-#include <sys/dtrace_bsd.h>
-cyclic_clock_func_t	cyclic_clock_func[MAXCPU];
-#endif
-
-/* Sanity checks on IDT vectors. */
-CTASSERT(APIC_IO_INTS + APIC_NUM_IOINTS == APIC_TIMER_INT);
-CTASSERT(APIC_TIMER_INT < APIC_LOCAL_INTS);
-CTASSERT(APIC_LOCAL_INTS == 240);
-CTASSERT(IPI_STOP < APIC_SPURIOUS_INT);
-
-/* Magic IRQ values for the timer and syscalls. */
-#define	IRQ_TIMER	(NUM_IO_INTS + 1)
-#define	IRQ_SYSCALL	(NUM_IO_INTS + 2)
-
-/*
- * Support for local APICs.  Local APICs manage interrupts on each
- * individual processor as opposed to I/O APICs which receive interrupts
- * from I/O devices and then forward them on to the local APICs.
- *
- * Local APICs can also send interrupts to each other thus providing the
- * mechanism for IPIs.
- */
-
-struct lvt {
-	u_int lvt_edgetrigger:1;
-	u_int lvt_activehi:1;
-	u_int lvt_masked:1;
-	u_int lvt_active:1;
-	u_int lvt_mode:16;
-	u_int lvt_vector:8;
-};
-
-struct lapic {
-	struct lvt la_lvts[LVT_MAX + 1];
-	u_int la_id:8;
-	u_int la_cluster:4;
-	u_int la_cluster_id:2;
-	u_int la_present:1;
-	u_long *la_timer_count;
-	u_long la_hard_ticks;
-	u_long la_stat_ticks;
-	u_long la_prof_ticks;
-	/* Include IDT_SYSCALL to make indexing easier. */
-	int la_ioint_irqs[APIC_NUM_IOINTS + 1];
-} static lapics[MAX_APIC_ID + 1];
-
-/* Global defaults for local APIC LVT entries. */
-static struct lvt lvts[LVT_MAX + 1] = {
-	{ 1, 1, 1, 1, APIC_LVT_DM_EXTINT, 0 },	/* LINT0: masked ExtINT */
-	{ 1, 1, 0, 1, APIC_LVT_DM_NMI, 0 },	/* LINT1: NMI */
-	{ 1, 1, 1, 1, APIC_LVT_DM_FIXED, APIC_TIMER_INT },	/* Timer */
-	{ 1, 1, 0, 1, APIC_LVT_DM_FIXED, APIC_ERROR_INT },	/* Error */
-	{ 1, 1, 1, 1, APIC_LVT_DM_NMI, 0 },	/* PMC */
-	{ 1, 1, 1, 1, APIC_LVT_DM_FIXED, APIC_THERMAL_INT },	/* Thermal */
-};
-
-static inthand_t *ioint_handlers[] = {
-	NULL,			/* 0 - 31 */
-	IDTVEC(apic_isr1),	/* 32 - 63 */
-	IDTVEC(apic_isr2),	/* 64 - 95 */
-	IDTVEC(apic_isr3),	/* 96 - 127 */
-	IDTVEC(apic_isr4),	/* 128 - 159 */
-	IDTVEC(apic_isr5),	/* 160 - 191 */
-	IDTVEC(apic_isr6),	/* 192 - 223 */
-	IDTVEC(apic_isr7),	/* 224 - 255 */
-};
-
-
-static u_int32_t lapic_timer_divisors[] = {
-	APIC_TDCR_1, APIC_TDCR_2, APIC_TDCR_4, APIC_TDCR_8, APIC_TDCR_16,
-	APIC_TDCR_32, APIC_TDCR_64, APIC_TDCR_128
-};
-
-extern inthand_t IDTVEC(rsvd);
-
-volatile lapic_t *lapic;
-vm_paddr_t lapic_paddr;
-static u_long lapic_timer_divisor, lapic_timer_period, lapic_timer_hz;
-static enum lapic_clock clockcoverage;
-
-static void	lapic_enable(void);
-static void	lapic_resume(struct pic *pic);
-static void	lapic_timer_enable_intr(void);
-static void	lapic_timer_oneshot(u_int count);
-static void	lapic_timer_periodic(u_int count);
-static void	lapic_timer_set_divisor(u_int divisor);
-static uint32_t	lvt_mode(struct lapic *la, u_int pin, uint32_t value);
-
-struct pic lapic_pic = { .pic_resume = lapic_resume };
-
-static uint32_t
-lvt_mode(struct lapic *la, u_int pin, uint32_t value)
-{
-	struct lvt *lvt;
-
-	KASSERT(pin <= LVT_MAX, ("%s: pin %u out of range", __func__, pin));
-	if (la->la_lvts[pin].lvt_active)
-		lvt = &la->la_lvts[pin];
-	else
-		lvt = &lvts[pin];
-
-	value &= ~(APIC_LVT_M | APIC_LVT_TM | APIC_LVT_IIPP | APIC_LVT_DM |
-	    APIC_LVT_VECTOR);
-	if (lvt->lvt_edgetrigger == 0)
-		value |= APIC_LVT_TM;
-	if (lvt->lvt_activehi == 0)
-		value |= APIC_LVT_IIPP_INTALO;
-	if (lvt->lvt_masked)
-		value |= APIC_LVT_M;
-	value |= lvt->lvt_mode;
-	switch (lvt->lvt_mode) {
-	case APIC_LVT_DM_NMI:
-	case APIC_LVT_DM_SMI:
-	case APIC_LVT_DM_INIT:
-	case APIC_LVT_DM_EXTINT:
-		if (!lvt->lvt_edgetrigger) {
-			printf("lapic%u: Forcing LINT%u to edge trigger\n",
-			    la->la_id, pin);
-			value |= APIC_LVT_TM;
-		}
-		/* Use a vector of 0. */
-		break;
-	case APIC_LVT_DM_FIXED:
-		value |= lvt->lvt_vector;
-		break;
-	default:
-		panic("bad APIC LVT delivery mode: %#x\n", value);
-	}
-	return (value);
-}
-
-/*
- * Map the local APIC and setup necessary interrupt vectors.
- */
-void
-lapic_init(vm_paddr_t addr)
-{
-
-	/* Map the local APIC and setup the spurious interrupt handler. */
-	KASSERT(trunc_page(addr) == addr,
-	    ("local APIC not aligned on a page boundary"));
-	lapic = pmap_mapdev(addr, sizeof(lapic_t));
-	lapic_paddr = addr;
-	setidt(APIC_SPURIOUS_INT, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL,
-	    GSEL(GCODE_SEL, SEL_KPL));
-
-	/* Perform basic initialization of the BSP's local APIC. */
-	lapic_enable();
-
-	/* Set BSP's per-CPU local APIC ID. */
-	PCPU_SET(apic_id, lapic_id());
-
-	/* Local APIC timer interrupt. */
-	setidt(APIC_TIMER_INT, IDTVEC(timerint), SDT_SYS386IGT, SEL_KPL,
-	    GSEL(GCODE_SEL, SEL_KPL));
-
-	/* Local APIC error interrupt. */
-	setidt(APIC_ERROR_INT, IDTVEC(errorint), SDT_SYS386IGT, SEL_KPL,
-	    GSEL(GCODE_SEL, SEL_KPL));
-
-	/* XXX: Thermal interrupt */
-}
-
-/*
- * Create a local APIC instance.
- */
-void
-lapic_create(u_int apic_id, int boot_cpu)
-{
-	int i;
-
-	if (apic_id > MAX_APIC_ID) {
-		printf("APIC: Ignoring local APIC with ID %d\n", apic_id);
-		if (boot_cpu)
-			panic("Can't ignore BSP");
-		return;
-	}
-	KASSERT(!lapics[apic_id].la_present, ("duplicate local APIC %u",
-	    apic_id));
-
-	/*
-	 * Assume no local LVT overrides and a cluster of 0 and
-	 * intra-cluster ID of 0.
-	 */
-	lapics[apic_id].la_present = 1;
-	lapics[apic_id].la_id = apic_id;
-	for (i = 0; i < LVT_MAX; i++) {
-		lapics[apic_id].la_lvts[i] = lvts[i];
-		lapics[apic_id].la_lvts[i].lvt_active = 0;
-	}
-	for (i = 0; i <= APIC_NUM_IOINTS; i++)
-	    lapics[apic_id].la_ioint_irqs[i] = -1;
-	lapics[apic_id].la_ioint_irqs[IDT_SYSCALL - APIC_IO_INTS] = IRQ_SYSCALL;
-	lapics[apic_id].la_ioint_irqs[APIC_TIMER_INT - APIC_IO_INTS] =
-	    IRQ_TIMER;
-
-#ifdef SMP
-	cpu_add(apic_id, boot_cpu);
-#endif
-}
-
-/*
- * Dump contents of local APIC registers
- */
-void
-lapic_dump(const char* str)
-{
-
-	printf("cpu%d %s:\n", PCPU_GET(cpuid), str);
-	printf("     ID: 0x%08x   VER: 0x%08x LDR: 0x%08x DFR: 0x%08x\n",
-	    lapic->id, lapic->version, lapic->ldr, lapic->dfr);
-	printf("  lint0: 0x%08x lint1: 0x%08x TPR: 0x%08x SVR: 0x%08x\n",
-	    lapic->lvt_lint0, lapic->lvt_lint1, lapic->tpr, lapic->svr);
-	printf("  timer: 0x%08x therm: 0x%08x err: 0x%08x pmc: 0x%08x\n",
-	    lapic->lvt_timer, lapic->lvt_thermal, lapic->lvt_error,
-	    lapic->lvt_pcint);
-}
-
-void
-lapic_setup(int boot)
-{
-	struct lapic *la;
-	u_int32_t maxlvt;
-	register_t eflags;
-	char buf[MAXCOMLEN + 1];
-
-	la = &lapics[lapic_id()];
-	KASSERT(la->la_present, ("missing APIC structure"));
-	eflags = intr_disable();
-	maxlvt = (lapic->version & APIC_VER_MAXLVT) >> MAXLVTSHIFT;
-
-	/* Initialize the TPR to allow all interrupts. */
-	lapic_set_tpr(0);
-
-	/* Setup spurious vector and enable the local APIC. */
-	lapic_enable();
-
-	/* Program LINT[01] LVT entries. */
-	lapic->lvt_lint0 = lvt_mode(la, LVT_LINT0, lapic->lvt_lint0);
-	lapic->lvt_lint1 = lvt_mode(la, LVT_LINT1, lapic->lvt_lint1);
-
-	/* Program the PMC LVT entry if present. */
-	if (maxlvt >= LVT_PMC)
-		lapic->lvt_pcint = lvt_mode(la, LVT_PMC, lapic->lvt_pcint);
-
-	/* Program timer LVT and setup handler. */
-	lapic->lvt_timer = lvt_mode(la, LVT_TIMER, lapic->lvt_timer);
-	if (boot) {
-		snprintf(buf, sizeof(buf), "cpu%d: timer", PCPU_GET(cpuid));
-		intrcnt_add(buf, &la->la_timer_count);
-	}
-
-	/* We don't setup the timer during boot on the BSP until later. */
-	if (!(boot && PCPU_GET(cpuid) == 0) && lapic_timer_hz != 0) {
-		KASSERT(lapic_timer_period != 0, ("lapic%u: zero divisor",
-		    lapic_id()));
-		lapic_timer_set_divisor(lapic_timer_divisor);
-		lapic_timer_periodic(lapic_timer_period);
-		lapic_timer_enable_intr();
-	}
-
-	/* Program error LVT and clear any existing errors. */
-	lapic->lvt_error = lvt_mode(la, LVT_ERROR, lapic->lvt_error);
-	lapic->esr = 0;
-
-	/* XXX: Thermal LVT */
-
-	intr_restore(eflags);
-}
-
-void
-lapic_reenable_pmc(void)
-{
-#ifdef HWPMC_HOOKS
-	uint32_t value;
-
-	value =  lapic->lvt_pcint;
-	value &= ~APIC_LVT_M;
-	lapic->lvt_pcint = value;
-#endif
-}
-
-#ifdef HWPMC_HOOKS
-static void
-lapic_update_pmc(void *dummy)
-{
-	struct lapic *la;
-
-	la = &lapics[lapic_id()];
-	lapic->lvt_pcint = lvt_mode(la, LVT_PMC, lapic->lvt_pcint);
-}
-#endif
-
-int
-lapic_enable_pmc(void)
-{
-#ifdef HWPMC_HOOKS
-	u_int32_t maxlvt;
-
-	/* Fail if the local APIC is not present. */
-	if (lapic == NULL)
-		return (0);
-
-	/* Fail if the PMC LVT is not present. */
-	maxlvt = (lapic->version & APIC_VER_MAXLVT) >> MAXLVTSHIFT;
-	if (maxlvt < LVT_PMC)
-		return (0);
-
-	lvts[LVT_PMC].lvt_masked = 0;
-
-#ifdef SMP
-	/*
-	 * If hwpmc was loaded at boot time then the APs may not be
-	 * started yet.  In that case, don't forward the request to
-	 * them as they will program the lvt when they start.
-	 */
-	if (smp_started)
-		smp_rendezvous(NULL, lapic_update_pmc, NULL, NULL);
-	else
-#endif
-		lapic_update_pmc(NULL);
-	return (1);
-#else
-	return (0);
-#endif
-}
-
-void
-lapic_disable_pmc(void)
-{
-#ifdef HWPMC_HOOKS
-	u_int32_t maxlvt;
-
-	/* Fail if the local APIC is not present. */
-	if (lapic == NULL)
-		return;
-
-	/* Fail if the PMC LVT is not present. */
-	maxlvt = (lapic->version & APIC_VER_MAXLVT) >> MAXLVTSHIFT;
-	if (maxlvt < LVT_PMC)
-		return;
-
-	lvts[LVT_PMC].lvt_masked = 1;
-
-#ifdef SMP
-	/* The APs should always be started when hwpmc is unloaded. */
-	KASSERT(mp_ncpus == 1 || smp_started, ("hwpmc unloaded too early"));
-#endif
-	smp_rendezvous(NULL, lapic_update_pmc, NULL, NULL);
-#endif
-}
-
-/*
- * Called by cpu_initclocks() on the BSP to setup the local APIC timer so
- * that it can drive hardclock, statclock, and profclock. 
- */
-enum lapic_clock
-lapic_setup_clock(enum lapic_clock srcsdes)
-{
-	u_long value;
-	int i;
-
-	/* lapic_setup_clock() should not be called with LAPIC_CLOCK_NONE. */
-	MPASS(srcsdes != LAPIC_CLOCK_NONE);
-
-	/* Can't drive the timer without a local APIC. */
-	if (lapic == NULL ||
-	    (resource_int_value("apic", 0, "clock", &i) == 0 && i == 0)) {
-		clockcoverage = LAPIC_CLOCK_NONE;
-		return (clockcoverage);
-	}
-
-	/* Start off with a divisor of 2 (power on reset default). */
-	lapic_timer_divisor = 2;
-
-	/* Try to calibrate the local APIC timer. */
-	do {
-		lapic_timer_set_divisor(lapic_timer_divisor);
-		lapic_timer_oneshot(APIC_TIMER_MAX_COUNT);
-		DELAY(2000000);
-		value = APIC_TIMER_MAX_COUNT - lapic->ccr_timer;
-		if (value != APIC_TIMER_MAX_COUNT)
-			break;
-		lapic_timer_divisor <<= 1;
-	} while (lapic_timer_divisor <= 128);
-	if (lapic_timer_divisor > 128)
-		panic("lapic: Divisor too big");
-	value /= 2;
-	if (bootverbose)
-		printf("lapic: Divisor %lu, Frequency %lu Hz\n",
-		    lapic_timer_divisor, value);
-
-	/*
-	 * We want to run stathz in the neighborhood of 128hz.  We would
-	 * like profhz to run as often as possible, so we let it run on
-	 * each clock tick.  We try to honor the requested 'hz' value as
-	 * much as possible.
-	 *
-	 * If 'hz' is above 1500, then we just let the lapic timer
-	 * (and profhz) run at hz.  If 'hz' is below 1500 but above
-	 * 750, then we let the lapic timer run at 2 * 'hz'.  If 'hz'
-	 * is below 750 then we let the lapic timer run at 4 * 'hz'.
-	 *
-	 * Please note that stathz and profhz are set only if all the
-	 * clocks are handled through the local APIC.
-	 */
-	if (srcsdes == LAPIC_CLOCK_ALL) {
-		if (hz >= 1500)
-			lapic_timer_hz = hz;
-		else if (hz >= 750)
-			lapic_timer_hz = hz * 2;
-		else
-			lapic_timer_hz = hz * 4;
-	} else
-		lapic_timer_hz = hz;
-	lapic_timer_period = value / lapic_timer_hz;
-	if (srcsdes == LAPIC_CLOCK_ALL) {
-		if (lapic_timer_hz < 128)
-			stathz = lapic_timer_hz;
-		else
-			stathz = lapic_timer_hz / (lapic_timer_hz / 128);
-		profhz = lapic_timer_hz;
-	}
-
-	/*
-	 * Start up the timer on the BSP.  The APs will kick off their
-	 * timer during lapic_setup().
-	 */
-	lapic_timer_periodic(lapic_timer_period);
-	lapic_timer_enable_intr();
-	clockcoverage = srcsdes;
-	return (srcsdes);
-}
-
-void
-lapic_disable(void)
-{
-	uint32_t value;
-
-	/* Software disable the local APIC. */
-	value = lapic->svr;
-	value &= ~APIC_SVR_SWEN;
-	lapic->svr = value;
-}
-
-static void
-lapic_enable(void)
-{
-	u_int32_t value;
-
-	/* Program the spurious vector to enable the local APIC. */
-	value = lapic->svr;
-	value &= ~(APIC_SVR_VECTOR | APIC_SVR_FOCUS);
-	value |= (APIC_SVR_FEN | APIC_SVR_SWEN | APIC_SPURIOUS_INT);
-	lapic->svr = value;
-}
-
-/* Reset the local APIC on the BSP during resume. */
-static void
-lapic_resume(struct pic *pic)
-{
-
-	lapic_setup(0);
-}
-
-int
-lapic_id(void)
-{
-
-	KASSERT(lapic != NULL, ("local APIC is not mapped"));
-	return (lapic->id >> APIC_ID_SHIFT);
-}
-
-int
-lapic_intr_pending(u_int vector)
-{
-	volatile u_int32_t *irr;
-
-	/*
-	 * The IRR registers are an array of 128-bit registers each of
-	 * which only describes 32 interrupts in the low 32 bits..  Thus,
-	 * we divide the vector by 32 to get the 128-bit index.  We then
-	 * multiply that index by 4 to get the equivalent index from
-	 * treating the IRR as an array of 32-bit registers.  Finally, we
-	 * modulus the vector by 32 to determine the individual bit to
-	 * test.
-	 */
-	irr = &lapic->irr0;
-	return (irr[(vector / 32) * 4] & 1 << (vector % 32));
-}
-
-void
-lapic_set_logical_id(u_int apic_id, u_int cluster, u_int cluster_id)
-{
-	struct lapic *la;
-
-	KASSERT(lapics[apic_id].la_present, ("%s: APIC %u doesn't exist",
-	    __func__, apic_id));
-	KASSERT(cluster <= APIC_MAX_CLUSTER, ("%s: cluster %u too big",
-	    __func__, cluster));
-	KASSERT(cluster_id <= APIC_MAX_INTRACLUSTER_ID,
-	    ("%s: intra cluster id %u too big", __func__, cluster_id));
-	la = &lapics[apic_id];
-	la->la_cluster = cluster;
-	la->la_cluster_id = cluster_id;
-}
-
-int
-lapic_set_lvt_mask(u_int apic_id, u_int pin, u_char masked)
-{
-
-	if (pin > LVT_MAX)
-		return (EINVAL);
-	if (apic_id == APIC_ID_ALL) {
-		lvts[pin].lvt_masked = masked;
-		if (bootverbose)
-			printf("lapic:");
-	} else {
-		KASSERT(lapics[apic_id].la_present,
-		    ("%s: missing APIC %u", __func__, apic_id));
-		lapics[apic_id].la_lvts[pin].lvt_masked = masked;
-		lapics[apic_id].la_lvts[pin].lvt_active = 1;
-		if (bootverbose)
-			printf("lapic%u:", apic_id);
-	}
-	if (bootverbose)
-		printf(" LINT%u %s\n", pin, masked ? "masked" : "unmasked");
-	return (0);
-}
-
-int
-lapic_set_lvt_mode(u_int apic_id, u_int pin, u_int32_t mode)
-{
-	struct lvt *lvt;
-
-	if (pin > LVT_MAX)
-		return (EINVAL);
-	if (apic_id == APIC_ID_ALL) {
-		lvt = &lvts[pin];
-		if (bootverbose)
-			printf("lapic:");
-	} else {
-		KASSERT(lapics[apic_id].la_present,
-		    ("%s: missing APIC %u", __func__, apic_id));
-		lvt = &lapics[apic_id].la_lvts[pin];
-		lvt->lvt_active = 1;
-		if (bootverbose)
-			printf("lapic%u:", apic_id);
-	}
-	lvt->lvt_mode = mode;
-	switch (mode) {
-	case APIC_LVT_DM_NMI:
-	case APIC_LVT_DM_SMI:
-	case APIC_LVT_DM_INIT:
-	case APIC_LVT_DM_EXTINT:
-		lvt->lvt_edgetrigger = 1;
-		lvt->lvt_activehi = 1;
-		if (mode == APIC_LVT_DM_EXTINT)
-			lvt->lvt_masked = 1;
-		else
-			lvt->lvt_masked = 0;
-		break;
-	default:
-		panic("Unsupported delivery mode: 0x%x\n", mode);
-	}
-	if (bootverbose) {
-		printf(" Routing ");
-		switch (mode) {
-		case APIC_LVT_DM_NMI:
-			printf("NMI");
-			break;
-		case APIC_LVT_DM_SMI:
-			printf("SMI");
-			break;
-		case APIC_LVT_DM_INIT:
-			printf("INIT");
-			break;
-		case APIC_LVT_DM_EXTINT:
-			printf("ExtINT");
-			break;
-		}
-		printf(" -> LINT%u\n", pin);
-	}
-	return (0);
-}
-
-int
-lapic_set_lvt_polarity(u_int apic_id, u_int pin, enum intr_polarity pol)
-{
-
-	if (pin > LVT_MAX || pol == INTR_POLARITY_CONFORM)
-		return (EINVAL);
-	if (apic_id == APIC_ID_ALL) {
-		lvts[pin].lvt_activehi = (pol == INTR_POLARITY_HIGH);
-		if (bootverbose)
-			printf("lapic:");
-	} else {
-		KASSERT(lapics[apic_id].la_present,
-		    ("%s: missing APIC %u", __func__, apic_id));
-		lapics[apic_id].la_lvts[pin].lvt_active = 1;
-		lapics[apic_id].la_lvts[pin].lvt_activehi =
-		    (pol == INTR_POLARITY_HIGH);
-		if (bootverbose)
-			printf("lapic%u:", apic_id);
-	}
-	if (bootverbose)
-		printf(" LINT%u polarity: %s\n", pin,
-		    pol == INTR_POLARITY_HIGH ? "high" : "low");
-	return (0);
-}
-
-int
-lapic_set_lvt_triggermode(u_int apic_id, u_int pin, enum intr_trigger trigger)
-{
-
-	if (pin > LVT_MAX || trigger == INTR_TRIGGER_CONFORM)
-		return (EINVAL);
-	if (apic_id == APIC_ID_ALL) {
-		lvts[pin].lvt_edgetrigger = (trigger == INTR_TRIGGER_EDGE);
-		if (bootverbose)
-			printf("lapic:");
-	} else {
-		KASSERT(lapics[apic_id].la_present,
-		    ("%s: missing APIC %u", __func__, apic_id));
-		lapics[apic_id].la_lvts[pin].lvt_edgetrigger =
-		    (trigger == INTR_TRIGGER_EDGE);
-		lapics[apic_id].la_lvts[pin].lvt_active = 1;
-		if (bootverbose)
-			printf("lapic%u:", apic_id);
-	}
-	if (bootverbose)
-		printf(" LINT%u trigger: %s\n", pin,
-		    trigger == INTR_TRIGGER_EDGE ? "edge" : "level");
-	return (0);
-}
-
-/*
- * Adjust the TPR of the current CPU so that it blocks all interrupts below
- * the passed in vector.
- */
-void
-lapic_set_tpr(u_int vector)
-{
-#ifdef CHEAP_TPR
-	lapic->tpr = vector;
-#else
-	u_int32_t tpr;
-
-	tpr = lapic->tpr & ~APIC_TPR_PRIO;
-	tpr |= vector;
-	lapic->tpr = tpr;
-#endif
-}
-
-void
-lapic_eoi(void)
-{
-
-	lapic->eoi = 0;
-}
-
-void
-lapic_handle_intr(int vector, struct trapframe *frame)
-{
-	struct intsrc *isrc;
-
-	if (vector == -1)
-		panic("Couldn't get vector from ISR!");
-	isrc = intr_lookup_source(apic_idt_to_irq(PCPU_GET(apic_id),
-	    vector));
-	intr_execute_handlers(isrc, frame);
-}
-
-void
-lapic_handle_timer(struct trapframe *frame)
-{
-	struct lapic *la;
-
-	/* Send EOI first thing. */
-	lapic_eoi();
-
-#if defined(SMP) && !defined(SCHED_ULE)
-	/*
-	 * Don't do any accounting for the disabled HTT cores, since it
-	 * will provide misleading numbers for the userland.
-	 *
-	 * No locking is necessary here, since even if we loose the race
-	 * when hlt_cpus_mask changes it is not a big deal, really.
-	 *
-	 * Don't do that for ULE, since ULE doesn't consider hlt_cpus_mask
-	 * and unlike other schedulers it actually schedules threads to
-	 * those CPUs.
-	 */
-	if ((hlt_cpus_mask & (1 << PCPU_GET(cpuid))) != 0)
-		return;
-#endif
-
-	/* Look up our local APIC structure for the tick counters. */
-	la = &lapics[PCPU_GET(apic_id)];
-	(*la->la_timer_count)++;
-	critical_enter();
-
-#ifdef KDTRACE_HOOKS
-	/*
-	 * If the DTrace hooks are configured and a callback function
-	 * has been registered, then call it to process the high speed
-	 * timers.
-	 */
-	int cpu = PCPU_GET(cpuid);
-	if (cyclic_clock_func[cpu] != NULL)
-		(*cyclic_clock_func[cpu])(frame);
-#endif
-
-	/* Fire hardclock at hz. */
-	la->la_hard_ticks += hz;
-	if (la->la_hard_ticks >= lapic_timer_hz) {
-		la->la_hard_ticks -= lapic_timer_hz;
-		if (PCPU_GET(cpuid) == 0)
-			hardclock(TRAPF_USERMODE(frame), TRAPF_PC(frame));
-		else
-			hardclock_cpu(TRAPF_USERMODE(frame));
-	}
-	if (clockcoverage == LAPIC_CLOCK_ALL) {
-
-		/* Fire statclock at stathz. */
-		la->la_stat_ticks += stathz;
-		if (la->la_stat_ticks >= lapic_timer_hz) {
-			la->la_stat_ticks -= lapic_timer_hz;
-			statclock(TRAPF_USERMODE(frame));
-		}
-
-		/* Fire profclock at profhz, but only when needed. */
-		la->la_prof_ticks += profhz;
-		if (la->la_prof_ticks >= lapic_timer_hz) {
-			la->la_prof_ticks -= lapic_timer_hz;
-			if (profprocs != 0)
-				profclock(TRAPF_USERMODE(frame),
-				    TRAPF_PC(frame));
-		}
-	}
-	critical_exit();
-}
-
-static void
-lapic_timer_set_divisor(u_int divisor)
-{
-
-	KASSERT(powerof2(divisor), ("lapic: invalid divisor %u", divisor));
-	KASSERT(ffs(divisor) <= sizeof(lapic_timer_divisors) /
-	    sizeof(u_int32_t), ("lapic: invalid divisor %u", divisor));
-	lapic->dcr_timer = lapic_timer_divisors[ffs(divisor) - 1];
-}
-
-static void
-lapic_timer_oneshot(u_int count)
-{
-	u_int32_t value;
-
-	value = lapic->lvt_timer;
-	value &= ~APIC_LVTT_TM;
-	value |= APIC_LVTT_TM_ONE_SHOT;
-	lapic->lvt_timer = value;
-	lapic->icr_timer = count;
-}
-
-static void
-lapic_timer_periodic(u_int count)
-{
-	u_int32_t value;
-
-	value = lapic->lvt_timer;
-	value &= ~APIC_LVTT_TM;
-	value |= APIC_LVTT_TM_PERIODIC;
-	lapic->lvt_timer = value;
-	lapic->icr_timer = count;
-}
-
-static void
-lapic_timer_enable_intr(void)
-{
-	u_int32_t value;
-
-	value = lapic->lvt_timer;
-	value &= ~APIC_LVT_M;
-	lapic->lvt_timer = value;
-}
-
-void
-lapic_handle_error(void)
-{
-	u_int32_t esr;
-
-	/*
-	 * Read the contents of the error status register.  Write to
-	 * the register first before reading from it to force the APIC
-	 * to update its value to indicate any errors that have
-	 * occurred since the previous write to the register.
-	 */
-	lapic->esr = 0;
-	esr = lapic->esr;
-
-	printf("CPU%d: local APIC error 0x%x\n", PCPU_GET(cpuid), esr);
-	lapic_eoi();
-}
-
-u_int
-apic_cpuid(u_int apic_id)
-{
-#ifdef SMP
-	return apic_cpuids[apic_id];
-#else
-	return 0;
-#endif
-}
-
-/* Request a free IDT vector to be used by the specified IRQ. */
-u_int
-apic_alloc_vector(u_int apic_id, u_int irq)
-{
-	u_int vector;
-
-	KASSERT(irq < NUM_IO_INTS, ("Invalid IRQ %u", irq));
-
-	/*
-	 * Search for a free vector.  Currently we just use a very simple
-	 * algorithm to find the first free vector.
-	 */
-	mtx_lock_spin(&icu_lock);
-	for (vector = 0; vector < APIC_NUM_IOINTS; vector++) {
-		if (lapics[apic_id].la_ioint_irqs[vector] != -1)
-			continue;
-		lapics[apic_id].la_ioint_irqs[vector] = irq;
-		mtx_unlock_spin(&icu_lock);
-		return (vector + APIC_IO_INTS);
-	}
-	mtx_unlock_spin(&icu_lock);
-	return (0);
-}
-
-/*
- * Request 'count' free contiguous IDT vectors to be used by 'count'
- * IRQs.  'count' must be a power of two and the vectors will be
- * aligned on a boundary of 'align'.  If the request cannot be
- * satisfied, 0 is returned.
- */
-u_int
-apic_alloc_vectors(u_int apic_id, u_int *irqs, u_int count, u_int align)
-{
-	u_int first, run, vector;
-
-	KASSERT(powerof2(count), ("bad count"));
-	KASSERT(powerof2(align), ("bad align"));
-	KASSERT(align >= count, ("align < count"));
-#ifdef INVARIANTS
-	for (run = 0; run < count; run++)
-		KASSERT(irqs[run] < NUM_IO_INTS, ("Invalid IRQ %u at index %u",
-		    irqs[run], run));
-#endif
-
-	/*
-	 * Search for 'count' free vectors.  As with apic_alloc_vector(),
-	 * this just uses a simple first fit algorithm.
-	 */
-	run = 0;
-	first = 0;
-	mtx_lock_spin(&icu_lock);
-	for (vector = 0; vector < APIC_NUM_IOINTS; vector++) {
-
-		/* Vector is in use, end run. */
-		if (lapics[apic_id].la_ioint_irqs[vector] != -1) {
-			run = 0;
-			first = 0;
-			continue;
-		}
-
-		/* Start a new run if run == 0 and vector is aligned. */
-		if (run == 0) {
-			if ((vector & (align - 1)) != 0)
-				continue;
-			first = vector;
-		}
-		run++;
-
-		/* Keep looping if the run isn't long enough yet. */
-		if (run < count)
-			continue;
-
-		/* Found a run, assign IRQs and return the first vector. */
-		for (vector = 0; vector < count; vector++)
-			lapics[apic_id].la_ioint_irqs[first + vector] =
-			    irqs[vector];
-		mtx_unlock_spin(&icu_lock);
-		return (first + APIC_IO_INTS);
-	}
-	mtx_unlock_spin(&icu_lock);
-	printf("APIC: Couldn't find APIC vectors for %u IRQs\n", count);
-	return (0);
-}
-
-/*
- * Enable a vector for a particular apic_id.  Since all lapics share idt
- * entries and ioint_handlers this enables the vector on all lapics.  lapics
- * which do not have the vector configured would report spurious interrupts
- * should it fire.
- */
-void
-apic_enable_vector(u_int apic_id, u_int vector)
-{
-
-	KASSERT(vector != IDT_SYSCALL, ("Attempt to overwrite syscall entry"));
-	KASSERT(ioint_handlers[vector / 32] != NULL,
-	    ("No ISR handler for vector %u", vector));
-	setidt(vector, ioint_handlers[vector / 32], SDT_SYS386IGT, SEL_KPL,
-	    GSEL(GCODE_SEL, SEL_KPL));
-}
-
-void
-apic_disable_vector(u_int apic_id, u_int vector)
-{
-
-	KASSERT(vector != IDT_SYSCALL, ("Attempt to overwrite syscall entry"));
-	KASSERT(ioint_handlers[vector / 32] != NULL,
-	    ("No ISR handler for vector %u", vector));
-#ifdef notyet
-	/*
-	 * We can not currently clear the idt entry because other cpus
-	 * may have a valid vector at this offset.
-	 */
-	setidt(vector, &IDTVEC(rsvd), SDT_SYS386TGT, SEL_KPL,
-	    GSEL(GCODE_SEL, SEL_KPL));
-#endif
-}
-
-/* Release an APIC vector when it's no longer in use. */
-void
-apic_free_vector(u_int apic_id, u_int vector, u_int irq)
-{
-	struct thread *td;
-
-	KASSERT(vector >= APIC_IO_INTS && vector != IDT_SYSCALL &&
-	    vector <= APIC_IO_INTS + APIC_NUM_IOINTS,
-	    ("Vector %u does not map to an IRQ line", vector));
-	KASSERT(irq < NUM_IO_INTS, ("Invalid IRQ %u", irq));
-	KASSERT(lapics[apic_id].la_ioint_irqs[vector - APIC_IO_INTS] ==
-	    irq, ("IRQ mismatch"));
-
-	/*
-	 * Bind us to the cpu that owned the vector before freeing it so
-	 * we don't lose an interrupt delivery race.
-	 */
-	td = curthread;
-	if (!rebooting) {
-		thread_lock(td);
-		if (sched_is_bound(td))
-			panic("apic_free_vector: Thread already bound.\n");
-		sched_bind(td, apic_cpuid(apic_id));
-		thread_unlock(td);
-	}
-	mtx_lock_spin(&icu_lock);
-	lapics[apic_id].la_ioint_irqs[vector - APIC_IO_INTS] = -1;
-	mtx_unlock_spin(&icu_lock);
-	if (!rebooting) {
-		thread_lock(td);
-		sched_unbind(td);
-		thread_unlock(td);
-	}
-}
-
-/* Map an IDT vector (APIC) to an IRQ (interrupt source). */
-u_int
-apic_idt_to_irq(u_int apic_id, u_int vector)
-{
-	int irq;
-
-	KASSERT(vector >= APIC_IO_INTS && vector != IDT_SYSCALL &&
-	    vector <= APIC_IO_INTS + APIC_NUM_IOINTS,
-	    ("Vector %u does not map to an IRQ line", vector));
-	irq = lapics[apic_id].la_ioint_irqs[vector - APIC_IO_INTS];
-	if (irq < 0)
-		irq = 0;
-	return (irq);
-}
-
-#ifdef DDB
-/*
- * Dump data about APIC IDT vector mappings.
- */
-DB_SHOW_COMMAND(apic, db_show_apic)
-{
-	struct intsrc *isrc;
-	int i, verbose;
-	u_int apic_id;
-	u_int irq;
-
-	if (strcmp(modif, "vv") == 0)
-		verbose = 2;
-	else if (strcmp(modif, "v") == 0)
-		verbose = 1;
-	else
-		verbose = 0;
-	for (apic_id = 0; apic_id <= MAX_APIC_ID; apic_id++) {
-		if (lapics[apic_id].la_present == 0)
-			continue;
-		db_printf("Interrupts bound to lapic %u\n", apic_id);
-		for (i = 0; i < APIC_NUM_IOINTS + 1 && !db_pager_quit; i++) {
-			irq = lapics[apic_id].la_ioint_irqs[i];
-			if (irq == -1 || irq == IRQ_SYSCALL)
-				continue;
-			db_printf("vec 0x%2x -> ", i + APIC_IO_INTS);
-			if (irq == IRQ_TIMER)
-				db_printf("lapic timer\n");
-			else if (irq < NUM_IO_INTS) {
-				isrc = intr_lookup_source(irq);
-				if (isrc == NULL || verbose == 0)
-					db_printf("IRQ %u\n", irq);
-				else
-					db_dump_intr_event(isrc->is_event,
-					    verbose == 2);
-			} else
-				db_printf("IRQ %u ???\n", irq);
-		}
-	}
-}
-
-static void
-dump_mask(const char *prefix, uint32_t v, int base)
-{
-	int i, first;
-
-	first = 1;
-	for (i = 0; i < 32; i++)
-		if (v & (1 << i)) {
-			if (first) {
-				db_printf("%s:", prefix);
-				first = 0;
-			}
-			db_printf(" %02x", base + i);
-		}
-	if (!first)
-		db_printf("\n");
-}
-
-/* Show info from the lapic regs for this CPU. */
-DB_SHOW_COMMAND(lapic, db_show_lapic)
-{
-	uint32_t v;
-
-	db_printf("lapic ID = %d\n", lapic_id());
-	v = lapic->version;
-	db_printf("version  = %d.%d\n", (v & APIC_VER_VERSION) >> 4,
-	    v & 0xf);
-	db_printf("max LVT  = %d\n", (v & APIC_VER_MAXLVT) >> MAXLVTSHIFT);
-	v = lapic->svr;
-	db_printf("SVR      = %02x (%s)\n", v & APIC_SVR_VECTOR,
-	    v & APIC_SVR_ENABLE ? "enabled" : "disabled");
-	db_printf("TPR      = %02x\n", lapic->tpr);
-
-#define dump_field(prefix, index)					\
-	dump_mask(__XSTRING(prefix ## index), lapic->prefix ## index,	\
-	    index * 32)
-
-	db_printf("In-service Interrupts:\n");
-	dump_field(isr, 0);
-	dump_field(isr, 1);
-	dump_field(isr, 2);
-	dump_field(isr, 3);
-	dump_field(isr, 4);
-	dump_field(isr, 5);
-	dump_field(isr, 6);
-	dump_field(isr, 7);
-
-	db_printf("TMR Interrupts:\n");
-	dump_field(tmr, 0);
-	dump_field(tmr, 1);
-	dump_field(tmr, 2);
-	dump_field(tmr, 3);
-	dump_field(tmr, 4);
-	dump_field(tmr, 5);
-	dump_field(tmr, 6);
-	dump_field(tmr, 7);
-
-	db_printf("IRR Interrupts:\n");
-	dump_field(irr, 0);
-	dump_field(irr, 1);
-	dump_field(irr, 2);
-	dump_field(irr, 3);
-	dump_field(irr, 4);
-	dump_field(irr, 5);
-	dump_field(irr, 6);
-	dump_field(irr, 7);
-
-#undef dump_field
-}
-#endif
-
-/*
- * APIC probing support code.  This includes code to manage enumerators.
- */
-
-static SLIST_HEAD(, apic_enumerator) enumerators =
-	SLIST_HEAD_INITIALIZER(enumerators);
-static struct apic_enumerator *best_enum;
-
-void
-apic_register_enumerator(struct apic_enumerator *enumerator)
-{
-#ifdef INVARIANTS
-	struct apic_enumerator *apic_enum;
-
-	SLIST_FOREACH(apic_enum, &enumerators, apic_next) {
-		if (apic_enum == enumerator)
-			panic("%s: Duplicate register of %s", __func__,
-			    enumerator->apic_name);
-	}
-#endif
-	SLIST_INSERT_HEAD(&enumerators, enumerator, apic_next);
-}
-
-/*
- * Probe the APIC enumerators, enumerate CPUs, and initialize the
- * local APIC.
- */
-static void
-apic_init(void *dummy __unused)
-{
-	struct apic_enumerator *enumerator;
-	uint64_t apic_base;
-	int retval, best;
-
-	/* We only support built in local APICs. */
-	if (!(cpu_feature & CPUID_APIC))
-		return;
-
-	/* Don't probe if APIC mode is disabled. */
-	if (resource_disabled("apic", 0))
-		return;
-
-	/* First, probe all the enumerators to find the best match. */
-	best_enum = NULL;
-	best = 0;
-	SLIST_FOREACH(enumerator, &enumerators, apic_next) {
-		retval = enumerator->apic_probe();
-		if (retval > 0)
-			continue;
-		if (best_enum == NULL || best < retval) {
-			best_enum = enumerator;
-			best = retval;
-		}
-	}
-	if (best_enum == NULL) {
-		if (bootverbose)
-			printf("APIC: Could not find any APICs.\n");
-		return;
-	}
-
-	if (bootverbose)
-		printf("APIC: Using the %s enumerator.\n",
-		    best_enum->apic_name);
-
-	/*
-	 * To work around an errata, we disable the local APIC on some
-	 * CPUs during early startup.  We need to turn the local APIC back
-	 * on on such CPUs now.
-	 */
-	if (cpu == CPU_686 && cpu_vendor_id == CPU_VENDOR_INTEL &&
-	    (cpu_id & 0xff0) == 0x610) {
-		apic_base = rdmsr(MSR_APICBASE);
-		apic_base |= APICBASE_ENABLED;
-		wrmsr(MSR_APICBASE, apic_base);
-	}
-
-	/* Second, probe the CPU's in the system. */
-	retval = best_enum->apic_probe_cpus();
-	if (retval != 0)
-		printf("%s: Failed to probe CPUs: returned %d\n",
-		    best_enum->apic_name, retval);
-
-	/* Third, initialize the local APIC. */
-	retval = best_enum->apic_setup_local();
-	if (retval != 0)
-		printf("%s: Failed to setup the local APIC: returned %d\n",
-		    best_enum->apic_name, retval);
-}
-SYSINIT(apic_init, SI_SUB_CPU, SI_ORDER_SECOND, apic_init, NULL);
-
-/*
- * Setup the I/O APICs.
- */
-static void
-apic_setup_io(void *dummy __unused)
-{
-	int retval;
-
-	if (best_enum == NULL)
-		return;
-	retval = best_enum->apic_setup_io();
-	if (retval != 0)
-		printf("%s: Failed to setup I/O APICs: returned %d\n",
-		    best_enum->apic_name, retval);
-
-#ifdef XEN
-	return;
-#endif
-	/*
-	 * Finish setting up the local APIC on the BSP once we know how to
-	 * properly program the LINT pins.
-	 */
-	lapic_setup(1);
-	intr_register_pic(&lapic_pic);
-	if (bootverbose)
-		lapic_dump("BSP");
-
-	/* Enable the MSI "pic". */
-	msi_init();
-}
-SYSINIT(apic_setup_io, SI_SUB_INTR, SI_ORDER_SECOND, apic_setup_io, NULL);
-
-#ifdef SMP
-/*
- * Inter Processor Interrupt functions.  The lapic_ipi_*() functions are
- * private to the sys/i386 code.  The public interface for the rest of the
- * kernel is defined in mp_machdep.c.
- */
-int
-lapic_ipi_wait(int delay)
-{
-	int x, incr;
-
-	/*
-	 * Wait delay loops for IPI to be sent.  This is highly bogus
-	 * since this is sensitive to CPU clock speed.  If delay is
-	 * -1, we wait forever.
-	 */
-	if (delay == -1) {
-		incr = 0;
-		delay = 1;
-	} else
-		incr = 1;
-	for (x = 0; x < delay; x += incr) {
-		if ((lapic->icr_lo & APIC_DELSTAT_MASK) == APIC_DELSTAT_IDLE)
-			return (1);
-		ia32_pause();
-	}
-	return (0);
-}
-
-void
-lapic_ipi_raw(register_t icrlo, u_int dest)
-{
-	register_t value, eflags;
-
-	/* XXX: Need more sanity checking of icrlo? */
-	KASSERT(lapic != NULL, ("%s called too early", __func__));
-	KASSERT((dest & ~(APIC_ID_MASK >> APIC_ID_SHIFT)) == 0,
-	    ("%s: invalid dest field", __func__));
-	KASSERT((icrlo & APIC_ICRLO_RESV_MASK) == 0,
-	    ("%s: reserved bits set in ICR LO register", __func__));
-
-	/* Set destination in ICR HI register if it is being used. */
-	eflags = intr_disable();
-	if ((icrlo & APIC_DEST_MASK) == APIC_DEST_DESTFLD) {
-		value = lapic->icr_hi;
-		value &= ~APIC_ID_MASK;
-		value |= dest << APIC_ID_SHIFT;
-		lapic->icr_hi = value;
-	}
-
-	/* Program the contents of the IPI and dispatch it. */
-	value = lapic->icr_lo;
-	value &= APIC_ICRLO_RESV_MASK;
-	value |= icrlo;
-	lapic->icr_lo = value;
-	intr_restore(eflags);
-}
-
-#define	BEFORE_SPIN	1000000
-#ifdef DETECT_DEADLOCK
-#define	AFTER_SPIN	1000
-#endif
-
-void
-lapic_ipi_vectored(u_int vector, int dest)
-{
-	register_t icrlo, destfield;
-
-	KASSERT((vector & ~APIC_VECTOR_MASK) == 0,
-	    ("%s: invalid vector %d", __func__, vector));
-
-	icrlo = APIC_DESTMODE_PHY | APIC_TRIGMOD_EDGE;
-
-	/*
-	 * IPI_STOP_HARD is just a "fake" vector used to send a NMI.
-	 * Use special rules regard NMI if passed, otherwise specify
-	 * the vector.
-	 */
-	if (vector == IPI_STOP_HARD)
-		icrlo |= APIC_DELMODE_NMI | APIC_LEVEL_ASSERT;
-	else
-		icrlo |= vector | APIC_DELMODE_FIXED | APIC_LEVEL_DEASSERT;
-	destfield = 0;
-	switch (dest) {
-	case APIC_IPI_DEST_SELF:
-		icrlo |= APIC_DEST_SELF;
-		break;
-	case APIC_IPI_DEST_ALL:
-		icrlo |= APIC_DEST_ALLISELF;
-		break;
-	case APIC_IPI_DEST_OTHERS:
-		icrlo |= APIC_DEST_ALLESELF;
-		break;
-	default:
-		KASSERT((dest & ~(APIC_ID_MASK >> APIC_ID_SHIFT)) == 0,
-		    ("%s: invalid destination 0x%x", __func__, dest));
-		destfield = dest;
-	}
-
-	/* Wait for an earlier IPI to finish. */
-	if (!lapic_ipi_wait(BEFORE_SPIN)) {
-		if (panicstr != NULL)
-			return;
-		else
-			panic("APIC: Previous IPI is stuck");
-	}
-
-	lapic_ipi_raw(icrlo, destfield);
-
-#ifdef DETECT_DEADLOCK
-	/* Wait for IPI to be delivered. */
-	if (!lapic_ipi_wait(AFTER_SPIN)) {
-#ifdef needsattention
-		/*
-		 * XXX FIXME:
-		 *
-		 * The above function waits for the message to actually be
-		 * delivered.  It breaks out after an arbitrary timeout
-		 * since the message should eventually be delivered (at
-		 * least in theory) and that if it wasn't we would catch
-		 * the failure with the check above when the next IPI is
-		 * sent.
-		 *
-		 * We could skip this wait entirely, EXCEPT it probably
-		 * protects us from other routines that assume that the
-		 * message was delivered and acted upon when this function
-		 * returns.
-		 */
-		printf("APIC: IPI might be stuck\n");
-#else /* !needsattention */
-		/* Wait until mesage is sent without a timeout. */
-		while (lapic->icr_lo & APIC_DELSTAT_PEND)
-			ia32_pause();
-#endif /* needsattention */
-	}
-#endif /* DETECT_DEADLOCK */
-}
-#endif /* SMP */