recording cvs-1.6 file death

1 files changed, 0 insertions, 778 deletions

diff --git a/sys/i386/pci/pci.c b/sys/i386/pci/pci.c
deleted file mode 100644
index 6ef7163..0000000
--- a/sys/i386/pci/pci.c
+++ /dev/null
@@ -1,778 +0,0 @@
-/**************************************************************************
-**
-**  $Id: pci.c,v 1.8 1994/10/25 23:09:08 se Exp $
-**
-**  General subroutines for the PCI bus on 80*86 systems.
-**  pci_configure ()
-**
-**  386bsd / FreeBSD
-**
-**-------------------------------------------------------------------------
-**
-** Copyright (c) 1994 Wolfgang Stanglmeier.  All rights reserved.
-**
-** Redistribution and use in source and binary forms, with or without
-** modification, are permitted provided that the following conditions
-** are met:
-** 1. Redistributions of source code must retain the above copyright
-**    notice, this list of conditions and the following disclaimer.
-** 2. Redistributions in binary form must reproduce the above copyright
-**    notice, this list of conditions and the following disclaimer in the
-**    documentation and/or other materials provided with the distribution.
-** 3. The name of the author may not be used to endorse or promote products
-**    derived from this software without specific prior written permission.
-**
-** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-**
-***************************************************************************
-*/
-
-#include <pci.h>
-#if NPCI > 0
-
-#ifndef __FreeBSD2__
-#if __FreeBSD__ >= 2
-#define	__FreeBSD2__
-#endif
-#endif
-
-/*========================================================
-**
-**	#includes  and  declarations
-**
-**========================================================
-*/
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/malloc.h>
-#include <sys/errno.h>
-
-#include <vm/vm.h>
-#include <vm/vm_param.h>
-
-#include <i386/isa/isa.h>
-#include <i386/isa/isa_device.h>
-#include <i386/isa/icu.h>
-#include <i386/pci/pcireg.h>
-
-#ifdef __FreeBSD2__
-#include <sys/devconf.h>
-	
-struct pci_devconf {
-	struct kern_devconf pdc_kdc;
-	struct pci_info     pdc_pi;
-};
-#endif
-
-/*
-**	Function prototypes missing in system headers
-*/
-
-#ifndef __FreeBSD2__
-extern	pmap_t pmap_kernel(void);
-static	vm_offset_t pmap_mapdev (vm_offset_t paddr, vm_size_t vsize);
-
-/*
- * Type of the first (asm) part of an interrupt handler.
- */
-typedef void inthand_t __P((u_int cs, u_int ef, u_int esp, u_int ss));
-
-/*
- * Usual type of the second (C) part of an interrupt handler.  Some bogus
- * ones need the arg to be the interrupt frame (and not a copy of it, which
- * is all that is possible in C).
- */
-typedef void inthand2_t __P((int unit));
-
-/*
-**	XXX	@FreeBSD2@
-**
-**	Unfortunately, the mptr argument is _no_ pointer in 2.0 FreeBSD.
-**	We would prefer a pointer because it enables us to install
-**	new interrupt handlers at any time.
-**	(This is just going to be changed ... <se> :)
-**	In 2.0 FreeBSD later installed interrupt handlers may change
-**	the xyz_imask, but this would not be recognized by handlers
-**	which are installed before.
-*/
-
-static int
-register_intr __P((int intr, int device_id, unsigned int flags,
-		       inthand2_t *handler, unsigned int * mptr, int unit));
-extern unsigned intr_mask[ICU_LEN];
-
-#endif /* !__FreeBSD2__ */
-
-/*========================================================
-**
-**	Autoconfiguration of pci devices.
-**
-**	This is reverse to the isa configuration.
-**	(1) find a pci device.
-**	(2) look for a driver.
-**
-**========================================================
-*/
-
-/*--------------------------------------------------------
-**
-**	The pci devices can be mapped to any address.
-**	As default we start at the last gigabyte.
-**
-**--------------------------------------------------------
-*/
-
-#ifndef PCI_PMEM_START
-#define PCI_PMEM_START 0xc0000000
-#endif
-
-static	vm_offset_t pci_paddr = PCI_PMEM_START;
-
-/*--------------------------------------------------------
-**
-**	The pci device interrupt lines should have been
-**	assigned by the bios. But if the bios failed to
-**	to it, we set it.
-**
-**--------------------------------------------------------
-*/
-
-#ifndef PCI_IRQ
-#define PCI_IRQ 0
-#endif
-
-static	u_long      pci_irq   = PCI_IRQ;
-
-/*---------------------------------------------------------
-**
-**	pci_configure ()
-**
-**	Probe all devices on pci bus and attach them.
-**
-**	May be called more than once.
-**	Any device is attached only once.
-**	(Attached devices are remembered in pci_seen.)
-**
-**---------------------------------------------------------
-*/
-
-static void not_supported (pcici_t tag, u_long type);
-
-static unsigned long pci_seen[NPCI];
-
-static int pci_conf_count;
-
-#ifdef __FreeBSD2__
-static int
-pci_externalize (struct proc *, struct kern_devconf *, void *, size_t);
- 
-static int
-pci_internalize (struct proc *, struct kern_devconf *, void *, size_t);
-
-#endif /* __FreeBSD2__ */
-
-void pci_configure()
-{
-	u_char	device,last_device;
-	u_short	bus;
-	pcici_t	tag;
-	pcidi_t type;
-	u_long	data;
-	int	unit;
-	int	pci_mechanism;
-	int	pciint;
-	int	irq;
-	char*	name=0;
-	vm_offset_t old_addr=pci_paddr;
-
-	struct pci_driver *drp=0;
-	struct pci_device *dvp;
-
-#ifdef __FreeBSD2__
-	struct pci_devconf *pdcp;
-#endif
-
-	/*
-	**	check pci bus present
-	*/
-
-	pci_mechanism = pci_conf_mode ();
-	if (!pci_mechanism) return;
-	last_device = pci_mechanism==1 ? 31 : 15;
-
-	/*
-	**	hello world ..
-	*/
-
-
-	for (bus=0;bus<NPCI;bus++) {
-#ifndef PCI_QUIET
-	    printf ("pci%d: scanning device 0..%d, mechanism=%d.\n",
-		bus, last_device, pci_mechanism);
-#endif
-	    for (device=0; device<=last_device; device ++) {
-
-		if (pci_seen[bus] & (1ul << device))
-			continue;
-
-		tag = pcitag (bus, device, 0);
-		type = pci_conf_read (tag, PCI_ID_REG);
-
-		if ((!type) || (type==0xfffffffful)) continue;
-
-		/*
-		**	lookup device in ioconfiguration:
-		*/
-
-		for (dvp = pci_devtab; dvp->pd_name; dvp++) {
-			drp = dvp->pd_driver;
-			if (!drp)
-				continue;
-			if ((name=(*drp->probe)(tag, type)))
-				break;
-		};
-
-		if (!dvp->pd_name) {
-#ifndef PCI_QUIET
-			if (pci_conf_count)
-				continue;
-			printf("pci%d:%d: ", bus, device);
-			not_supported (tag, type);
-#endif
-			continue;
-		};
-
-		pci_seen[bus] |= (1ul << device);
-		/*
-		**	Get and increment the unit.
-		*/
-
-		unit = (*drp->count)++;
-
-		/*
-		**	ignore device ?
-		*/
-
-		if (!*name) continue;
-
-		/*
-		**	Announce this device
-		*/
-
-		printf ("%s%d <%s>", dvp->pd_name, unit, name);
-
-		/*
-		**	Get the int pin number (pci interrupt number a-d)
-		**	from the pci configuration space.
-		*/
-
-		data = pci_conf_read (tag, PCI_INTERRUPT_REG);
-		pciint = PCI_INTERRUPT_PIN_EXTRACT(data);
-
-		if (pciint) {
-
-			printf (" int %c", 0x60+pciint);
-
-			/*
-			**	If the interrupt line register is not set,
-			**	set it now from PCI_IRQ.
-			*/
-
-			if (!(PCI_INTERRUPT_LINE_EXTRACT(data))) {
-
-				irq = pci_irq & 0x0f;
-				pci_irq >>= 4;
-
-				data = PCI_INTERRUPT_LINE_INSERT(data, irq);
-				printf (" (config)");
-				pci_conf_write (tag, PCI_INTERRUPT_REG, data);
-			};
-
-			irq = PCI_INTERRUPT_LINE_EXTRACT(data);
-
-			/*
-			**	If it's zero, the isa irq number is unknown,
-			**	and we cannot bind the pci interrupt to isa.
-			*/
-
-			if (irq)
-				printf (" irq %d", irq);
-			else
-				printf (" not bound");
-		};
-
-		/*
-		**	enable memory access
-		*/
-
-		data = (pci_conf_read (tag, PCI_COMMAND_STATUS_REG)
-			& 0xffff) | PCI_COMMAND_MEM_ENABLE;
-
-		pci_conf_write (tag, (u_char) PCI_COMMAND_STATUS_REG, data);
-
-		/*
-		**	show pci slot.
-		*/
-
-		printf (" on pci%d:%d\n", bus, device);
-
-#ifdef __FreeBSD2__
-
-		/*
-		**	Allocate a devconf structure
-		*/
-
-		pdcp = (struct pci_devconf *)
-                	malloc (sizeof (struct pci_devconf),M_DEVBUF,M_WAITOK);
-
-		/*
-		**	Fill in.
-		**
-		**	Sorry, this is not yet complete.
-		**	We should, and eventually will, set the
-		**	parent pointer to a pci bus devconf structure,
-		**	and arrange to set the state field dynamically.
-		**
-		**	But I'll go to vacation today, and after all,
-		**	wasn't there a new feature freeze on Oct 1.?
-		*/
-
-		pdcp -> pdc_pi.pi_bus	 = bus;
-		pdcp -> pdc_pi.pi_device = device;
-
-		pdcp -> pdc_kdc.kdc_name = dvp->pd_name;
-		pdcp -> pdc_kdc.kdc_unit = unit;
-
-		pdcp -> pdc_kdc.kdc_md.mddc_devtype = MDDT_PCI;
-
-		pdcp -> pdc_kdc.kdc_externalize = pci_externalize;
-		pdcp -> pdc_kdc.kdc_internalize = pci_internalize;
-
-		pdcp -> pdc_kdc.kdc_datalen     = PCI_EXTERNAL_LEN;
-		pdcp -> pdc_kdc.kdc_parentdata  = &pdcp->pdc_pi;
-		pdcp -> pdc_kdc.kdc_state       = DC_UNKNOWN;
-		pdcp -> pdc_kdc.kdc_description = name;
-
-		/*
-		**	And register this device
-		*/
-
-		dev_attach (&pdcp->pdc_kdc);
-
-#endif /* __FreeBSD2__ */
-
-
-		/*
-		**	attach device
-		**	may produce additional log messages,
-		**	i.e. when installing subdevices.
-		*/
-
-		(*drp->attach) (tag, unit);
-	    };
-	};
-
-#ifndef PCI_QUIET
-	if (pci_paddr != old_addr)
-		printf ("pci uses physical addresses from 0x%lx to 0x%lx\n",
-			(u_long)PCI_PMEM_START, (u_long)pci_paddr);
-#endif
-	pci_conf_count++;
-}
-
-/*-----------------------------------------------------------------------
-**
-**	Map device into port space.
-**
-**	PCI-Specification:  6.2.5.1: address maps
-**
-**-----------------------------------------------------------------------
-*/
-
-int pci_map_port (pcici_t tag, u_long reg, u_short* pa)
-{
-	/*
-	**	@MAPIO@ not yet implemented.
-	*/
-	printf ("pci_map_port failed: not yet implemented\n");
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
-**
-**	Map device into virtual and physical space
-**
-**	PCI-Specification:  6.2.5.1: address maps
-**
-**-----------------------------------------------------------------------
-*/
-
-int pci_map_mem (pcici_t tag, u_long reg, vm_offset_t* va, vm_offset_t* pa)
-{
-	u_long data;
-	vm_size_t vsize;
-	vm_offset_t vaddr;
-
-	/*
-	**	sanity check
-	*/
-
-        if (reg < PCI_MAP_REG_START || reg >= PCI_MAP_REG_END || (reg & 3)) {
-        	printf ("pci_map_mem failed: bad register=0x%x\n",
-               		(unsigned)reg);
-                return (0);
-	};
-
-	/*
-	**	get size and type of memory
-	**
-	**	type is in the lowest four bits.
-	**	If device requires 2^n bytes, the next
-	**	n-4 bits are read as 0.
-	*/
-
-	pci_conf_write (tag, reg, 0xfffffffful);
-	data = pci_conf_read (tag, reg);
-
-	switch (data & 0x0f) {
-
-	case PCI_MAP_MEMORY_TYPE_32BIT:	/* 32 bit non cachable */
-		break;
-
-	default:	/* unknown */
-                printf ("pci_map_mem failed: bad memory type=0x%x\n",
-               		(unsigned) data);
-                return (0);
-	};
-
-	/*
-	**	mask out the type,
-	**	and round up to a page size
-	*/
-
-	vsize = round_page (-(data &  PCI_MAP_MEMORY_ADDRESS_MASK));
-
-	if (!vsize) return (0);
-
-	/*
-	**	align physical address to virtual size
-	*/
-
-	if ((data = pci_paddr % vsize))
-		pci_paddr += vsize - data;
-
-	vaddr = (vm_offset_t) pmap_mapdev (pci_paddr, vsize);
-	
-
-	if (!vaddr) return (0);
-
-#ifndef PCI_QUIET
-	/*
-	**	display values.
-	*/
-
-	printf ("\treg%d: virtual=0x%lx physical=0x%lx\n",
-		(unsigned) reg, (u_long)vaddr, (u_long)pci_paddr);
-#endif
-
-	/*
-	**	return them to the driver
-	*/
-
-	*va = vaddr;
-	*pa = pci_paddr;
-
-	/*
-	**	set device address
-	*/
-
-	pci_conf_write (tag, reg, pci_paddr);
-
-	/*
-	**	and don't forget to increment pci_paddr
-	*/
-
-	pci_paddr += vsize;
-
-	return (1);
-}
-
-/*------------------------------------------------------------
-**
-**	Interface functions for the devconf module.
-**
-**------------------------------------------------------------
-*/
-
-static int
-pci_externalize (struct proc *p, struct kern_devconf *kdcp, void *u, size_t l)
-{
-	struct pci_externalize_buffer buffer;
-	struct pci_info * pip = kdcp->kdc_parentdata;
-        pcici_t tag;
-	int	i;
-
-	if (l < sizeof buffer) {
-                return ENOMEM;
-	};
-
-	tag = pcitag (pip->pi_bus, pip->pi_device, 0);
-
-	buffer.peb_pci_info	= *pip;
-
-	for (i=0; i<PCI_EXT_CONF_LEN; i++) {
-		buffer.peb_config[i] = pci_conf_read (tag, i*4);
-	};
-
-        return copyout(&buffer, u, sizeof buffer);
-}
- 
- 
-static int
-pci_internalize (struct proc *p, struct kern_devconf *kdcp, void *u, size_t s)
-{
-        return EOPNOTSUPP;
-}
-
-/*-----------------------------------------------------------------------
-**
-**	Map pci interrupts to isa interrupts.
-**
-**-----------------------------------------------------------------------
-*/
-
-static	unsigned int	pci_int_mask [16];
-
-int pci_map_int (pcici_t tag, int(*func)(), void* arg, unsigned* maskptr)
-{
-	int irq;
-	unsigned mask;
-
-	irq = PCI_INTERRUPT_LINE_EXTRACT(
-		pci_conf_read (tag, PCI_INTERRUPT_REG));
-
-	if (irq >= 16 || irq <= 0) {
-		printf ("pci_map_int failed: no int line set.\n");
-		return (0);
-	}
-
-	mask = 1ul << irq;
-
-	if (!maskptr)
-		maskptr = &pci_int_mask[irq];
-
-	INTRMASK (*maskptr, mask);
-
-	register_intr(
-		irq,		/* isa irq	*/
-		0,		/* deviced??	*/
-		0,		/* flags?	*/
-		(inthand2_t*) func, /* handler	*/
-		maskptr,	/* mask pointer	*/
-		(int) arg);	/* handler arg	*/
-
-#ifdef __FreeBSD2__
-	/*
-	**	XXX See comment at beginning of file.
-	**
-	**	Have to update all the interrupt masks ... Grrrrr!!!
-	*/
-	{
-		unsigned * mp = &intr_mask[0];
-		/*
-		**	update the isa interrupt masks.
-		*/
-		for (mp=&intr_mask[0]; mp<&intr_mask[ICU_LEN]; mp++)
-			if (*mp & *maskptr)
-				*mp |= mask;
-		/*
-		**	update the pci interrupt masks.
-		*/
-		for (mp=&pci_int_mask[0]; mp<&pci_int_mask[16]; mp++)
-			if (*mp & *maskptr)
-				*mp |= mask;
-	};
-#endif
-
-	INTREN (mask);
-
-	return (1);
-}
-
-/*-----------------------------------------------------------
-**
-**	Display of unknown devices.
-**
-**-----------------------------------------------------------
-*/
-struct vt {
-	u_short	ident;
-	char*	name;
-};
-
-static struct vt VendorTable[] = {
-	{0x1002, "ATI TECHNOLOGIES INC"},
-	{0x1011, "DIGITAL EQUIPMENT CORPORATION"},
-	{0x101A, "NCR"},
-	{0x102B, "MATROX"},
-	{0x1045, "OPTI"},
-	{0x5333, "S3 INC."},
-	{0x8086, "INTEL CORPORATION"},
-	{0,0}
-};
-
-static const char *const majclasses[] = {
-	"old", "storage", "network", "display",
-	"multimedia", "memory", "bridge" 
-};
-
-void not_supported (pcici_t tag, u_long type)
-{
-	u_char	reg;
-	u_long	data;
-	struct vt * vp;
-
-	/*
-	**	lookup the names.
-	*/
-
-	for (vp=VendorTable; vp->ident; vp++)
-		if (vp->ident == (type & 0xffff))
-			break;
-
-	/*
-	**	and display them.
-	*/
-
-	if (vp->ident) printf (vp->name);
-		else   printf ("vendor=0x%lx", type & 0xffff);
-
-	printf (", device=0x%lx", type >> 16);
-
-	data = (pci_conf_read(tag, PCI_CLASS_REG) >> 24) & 0xff;
-	if (data < sizeof(majclasses) / sizeof(majclasses[0]))
-		printf(", class=%s", majclasses[data]);
-
-	printf (" [not supported]\n");
-
-	for (reg=PCI_MAP_REG_START; reg<PCI_MAP_REG_END; reg+=4) {
-		data = pci_conf_read (tag, reg);
-		if (!data) continue;
-		switch (data&7) {
-
-		case 1:
-		case 5:
-			printf ("	map(%x): io(%lx)\n",
-				reg, data & ~3);
-			break;
-		case 0:
-			printf ("	map(%x): mem32(%lx)\n",
-				reg, data & ~7);
-			break;
-		case 2:
-			printf ("	map(%x): mem20(%lx)\n",
-				reg, data & ~7);
-			break;
-		case 4:
-			printf ("	map(%x): mem64(%lx)\n",
-				reg, data & ~7);
-			break;
-		}
-	}
-}
-
-#ifndef __FreeBSD2__
-/*-----------------------------------------------------------
-**
-**	Mapping of physical to virtual memory
-**
-**-----------------------------------------------------------
-*/
-
-extern vm_map_t kernel_map;
-
-static	vm_offset_t pmap_mapdev (vm_offset_t paddr, vm_size_t vsize)
-{
-	vm_offset_t	vaddr,value;
-	u_long		result;
-
-	vaddr  = vm_map_min (kernel_map);
-
-	result = vm_map_find (kernel_map, (void*)0, (vm_offset_t) 0,
-				&vaddr, vsize, TRUE);
-
-	if (result != KERN_SUCCESS) {
-		printf (" vm_map_find failed(%d)\n", result);
-		return (0);
-	};
-
-	/*
-	**	map physical
-	*/
-
-	value = vaddr;
-	while (vsize >= NBPG) {
-		pmap_enter (pmap_kernel(), vaddr, paddr,
-				VM_PROT_READ|VM_PROT_WRITE, TRUE);
-		vaddr += NBPG;
-		paddr += NBPG;
-		vsize -= NBPG;
-	};
-	return (value);
-}
-
-/*------------------------------------------------------------
-**
-**	Emulate the register_intr() function of FreeBSD 2.0
-**
-**	requires a patch:
-**	FreeBSD 2.0:	"/sys/i386/isa/vector.s"
-**	386bsd0.1:	"/sys/i386/isa/icu.s"
-**	386bsd1.0:	Please ask Jesus Monroy Jr.
-**
-**------------------------------------------------------------
-*/
-
-#include <machine/segments.h>
-
-int		pci_int_unit [16];
-inthand2_t*    (pci_int_hdlr [16]);
-unsigned int *	pci_int_mptr [16];
-unsigned int	pci_int_count[16];
-
-extern void
-	Vpci3(), Vpci4(), Vpci5(), Vpci6(), Vpci7(), Vpci8(), Vpci9(),
-	Vpci10(), Vpci11(), Vpci12(), Vpci13(), Vpci14(), Vpci15();
-
-static inthand_t* pci_int_glue[16] = {
-	0, 0, 0, Vpci3, Vpci4, Vpci5, Vpci6, Vpci7, Vpci8,
-	Vpci9, Vpci10, Vpci11, Vpci12, Vpci13, Vpci14, Vpci15 };
-
-static int
-register_intr __P((int intr, int device_id, unsigned int flags,
-		       inthand2_t *handler, unsigned int* mptr, int unit))
-{
-	if (intr >= 16 || intr <= 2)
-		return (EINVAL);
-	if (pci_int_hdlr [intr])
-		return (EBUSY);
-
-	pci_int_hdlr [intr] = handler;
-	pci_int_unit [intr] = unit;
-	pci_int_mptr [intr] = mptr;
-
-	setidt(NRSVIDT + intr, pci_int_glue[intr], SDT_SYS386IGT, SEL_KPL);
-	return (0);
-}
-#endif /* __FreeBSD2__ */
-#endif /* NPCI */