Remember to actually program the MAC address into the unicast filter

in vr_init(). The VIA Rhine chip happens to be able to automatically
read its station address from the EEPROM automatically when reset,
so you don't need to program the filter if you want to keep using the
factory default address, but if you want to change it with "ifconfig vr0
ether xx:xx:xx:xx:xx:xx" then we need to manually set it in the init
routine.

1 files changed, 7 insertions, 0 deletions

diff --git a/sys/dev/vr/if_vr.c b/sys/dev/vr/if_vr.c
index 9c6591b..2d14680 100644
--- a/sys/dev/vr/if_vr.c
+++ b/sys/dev/vr/if_vr.c
@@ -1388,6 +1388,7 @@ static void vr_init(xsc)
 	struct vr_softc		*sc = xsc;
 	struct ifnet		*ifp = &sc->arpcom.ac_if;
 	struct mii_data		*mii;
+	int			i;
 
 	VR_LOCK(sc);
 
@@ -1399,6 +1400,12 @@ static void vr_init(xsc)
 	vr_stop(sc);
 	vr_reset(sc);
 
+	/*
+	 * Set our station address.
+	 */
+	for (i = 0; i < ETHER_ADDR_LEN; i++)
+		CSR_WRITE_1(sc, VR_PAR0 + i, sc->arpcom.ac_enaddr[i]);
+
 	VR_CLRBIT(sc, VR_RXCFG, VR_RXCFG_RX_THRESH);
 	VR_SETBIT(sc, VR_RXCFG, VR_RXTHRESH_STORENFWD);