This commit adds support for the NetBSD MII abstraction layer and

MII-compliant PHY drivers. Many 10/100 ethernet NICs available today
either use an MII transceiver or have built-in transceivers that can
be programmed using an MII interface. It makes sense then to separate
this support out into common code instead of duplicating it in all
of the NIC drivers. The mii code also handles all of the media
detection, selection and reporting via the ifmedia interface.

This is basically the same code from NetBSD's /sys/dev/mii, except
it's been adapted to FreeBSD's bus architecture. The advantage to this
is that it automatically allows everything to be turned into a
loadable module. There are some common functions for use in drivers
once an miibus has been attached (mii_mediachg(), mii_pollstat(),
mii_tick()) as well as individual PHY drivers. There is also a
generic driver for all PHYs that aren't handled by a specific driver.
It's possible to do this because all 10/100 PHYs implement the same
general register set in addition to their vendor-specific register
sets, so for the most part you can use one driver for pretty much
any PHY. There are a couple of oddball exceptions though, hence
the need to have specific drivers.

There are two layers: the generic "miibus" layer and the PHY driver
layer. The drivers are child devices of "miibus" and the "miibus" is
a child of a given NIC driver. The "miibus" code and the PHY drivers
can actually be compiled and kldoaded as completely separate modules
or compiled together into one module. For the moment I'm using the
latter approach since the code is relatively small.

Currently there are only three PHY drivers here: the generic driver,
the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding
others later as I convert various NIC drivers to use this code.

I realize that I'm cvs adding this stuff instead of importing it
onto a separate vendor branch, but in my opinion the import approach
doesn't really offer any significant advantage: I'm going to be
maintaining this stuff and writing my own PHY drivers one way or
the other.

1 files changed, 120 insertions, 0 deletions

diff --git a/sys/dev/mii/ukphy_subr.c b/sys/dev/mii/ukphy_subr.c
new file mode 100644
index 0000000..11904a2
--- /dev/null
+++ b/sys/dev/mii/ukphy_subr.c
@@ -0,0 +1,120 @@
+/*	$NetBSD: ukphy_subr.c,v 1.2 1998/11/05 04:08:02 thorpej Exp $	*/
+
+/*-
+ * Copyright (c) 1998 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
+ * NASA Ames Research Center, and by Frank van der Linden.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by the NetBSD
+ *	Foundation, Inc. and its contributors.
+ * 4. Neither the name of The NetBSD Foundation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Subroutines shared by the ukphy driver and other PHY drivers.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/malloc.h>
+#include <sys/socket.h>
+#include <sys/module.h>
+#include <sys/bus.h>
+
+#include <net/if.h>
+#include <net/if_media.h>
+
+#include <dev/mii/mii.h>
+#include <dev/mii/miivar.h>
+
+#include "miibus_if.h"
+
+#if !defined(lint)
+static const char rcsid[] =
+	"$Id$";
+#endif
+
+/*
+ * Media status subroutine.  If a PHY driver does media detection simply
+ * by decoding the NWay autonegotiation, use this routine.
+ */
+void
+ukphy_status(phy)
+	struct mii_softc *phy;
+{
+	struct mii_data *mii = phy->mii_pdata;
+	int bmsr, bmcr, anlpar;
+
+	mii->mii_media_status = IFM_AVALID;
+	mii->mii_media_active = IFM_ETHER;
+
+	bmsr = PHY_READ(phy, MII_BMSR) | PHY_READ(phy, MII_BMSR);
+	if (bmsr & BMSR_LINK)
+		mii->mii_media_status |= IFM_ACTIVE;
+
+	bmcr = PHY_READ(phy, MII_BMCR);
+	if (bmcr & BMCR_ISO) {
+		mii->mii_media_active |= IFM_NONE;
+		mii->mii_media_status = 0;
+		return;
+	}
+
+	if (bmcr & BMCR_LOOP)
+		mii->mii_media_active |= IFM_LOOP;
+
+	if (bmcr & BMCR_AUTOEN) {
+		/*
+		 * NWay autonegotiation takes the highest-order common
+		 * bit of the ANAR and ANLPAR (i.e. best media advertised
+		 * both by us and our link partner).
+		 */
+		if ((bmsr & BMSR_ACOMP) == 0) {
+			/* Erg, still trying, I guess... */
+			mii->mii_media_active |= IFM_NONE;
+			return;
+		}
+
+		anlpar = PHY_READ(phy, MII_ANAR) & PHY_READ(phy, MII_ANLPAR);
+		if (anlpar & ANLPAR_T4)
+			mii->mii_media_active |= IFM_100_T4;
+		else if (anlpar & ANLPAR_TX_FD)
+			mii->mii_media_active |= IFM_100_TX|IFM_FDX;
+		else if (anlpar & ANLPAR_TX)
+			mii->mii_media_active |= IFM_100_TX;
+		else if (anlpar & ANLPAR_10_FD)
+			mii->mii_media_active |= IFM_10_T|IFM_FDX;
+		else if (anlpar & ANLPAR_10)
+			mii->mii_media_active |= IFM_10_T;
+		else
+			mii->mii_media_active |= IFM_NONE;
+	} else
+		mii->mii_media_active = mii_media_from_bmcr(bmcr);
+}