diff options
author | mdodd <mdodd@FreeBSD.org> | 2002-06-03 09:16:52 +0000 |
---|---|---|
committer | mdodd <mdodd@FreeBSD.org> | 2002-06-03 09:16:52 +0000 |
commit | 67912834859799368dba542bd95e8c42d02abe82 (patch) | |
tree | f602b11a3cb7ab78dbb421184db14467f248d166 /sys/dev/hea | |
parent | 50437cfa685a53287190566c1c3b89197e9d92a0 (diff) | |
download | FreeBSD-src-67912834859799368dba542bd95e8c42d02abe82.zip FreeBSD-src-67912834859799368dba542bd95e8c42d02abe82.tar.gz |
Quick and dirty convert to newbus. (Eventually 'eni.c' should go away.)
Module loads and unloads properly.
Thanks to Richard Hodges <rh@matriplex.com> for donating the hardware
to allow me to work on this driver.
Diffstat (limited to 'sys/dev/hea')
-rw-r--r-- | sys/dev/hea/eni.c | 39 | ||||
-rw-r--r-- | sys/dev/hea/eni.h | 4 | ||||
-rw-r--r-- | sys/dev/hea/eni_buffer.c | 5 | ||||
-rw-r--r-- | sys/dev/hea/hea_freebsd.c | 357 | ||||
-rw-r--r-- | sys/dev/hea/hea_freebsd.h | 59 | ||||
-rw-r--r-- | sys/dev/hea/hea_pci.c | 224 |
6 files changed, 670 insertions, 18 deletions
diff --git a/sys/dev/hea/eni.c b/sys/dev/hea/eni.c index 804eca3..d1b2ef3 100644 --- a/sys/dev/hea/eni.c +++ b/sys/dev/hea/eni.c @@ -47,6 +47,10 @@ #include <sys/syslog.h> #include <sys/eventhandler.h> #include <net/if.h> + +#include <sys/bus.h> +#include <sys/conf.h> + #include <netatm/port.h> #include <netatm/queue.h> #include <netatm/atm.h> @@ -58,6 +62,9 @@ #include <netatm/atm_pcb.h> #include <netatm/atm_var.h> +#include <dev/pci/pcireg.h> +#include <dev/pci/pcivar.h> + #include <dev/hea/eni_stats.h> #include <dev/hea/eni.h> #include <dev/hea/eni_var.h> @@ -66,25 +73,26 @@ __RCSID("@(#) $FreeBSD$"); #endif -#ifndef COMPAT_OLDPCI -#error "The eni device requires the old pci compatibility shims" -#endif - /* * Typedef local functions */ +#if 0 static const char *eni_pci_probe(pcici_t, pcidi_t); static void eni_pci_attach(pcici_t, int); +#endif static int eni_get_ack(Eni_unit *); static int eni_get_sebyte(Eni_unit *); -static void eni_read_seeprom(Eni_unit *); +void eni_read_seeprom(Eni_unit *); +#if 0 #if BSD < 199506 static int eni_pci_shutdown(struct kern_devconf *, int); #else static void eni_pci_shutdown(void *, int); #endif static void eni_pci_reset(Eni_unit *); +#endif +#if 0 /* * Used by kernel to return number of claimed devices */ @@ -134,6 +142,7 @@ eni_pci_probe ( pcici_t config_id, pcidi_t device_id ) return ( NULL ); } +#endif /* * The ENI-155p adapter uses an ATMEL AT24C01 serial EEPROM to store @@ -149,8 +158,8 @@ eni_pci_probe ( pcici_t config_id, pcidi_t device_id ) */ #define WRITE_SEEPROM() ( \ { \ - (void) pci_conf_write ( eup->eu_pcitag, SEEPROM, \ - eup->eu_sevar ); \ + (void) pci_write_config(eup->eu_pcitag, SEEPROM, \ + eup->eu_sevar, 4); \ DELAY(SEPROM_DELAY); \ } \ ) @@ -216,7 +225,7 @@ eni_pci_probe ( pcici_t config_id, pcidi_t device_id ) * */ static int -eni_get_ack ( eup ) +eni_get_ack (eup) Eni_unit *eup; { int ack; @@ -225,14 +234,14 @@ eni_get_ack ( eup ) /* * Read DATA line from SEPROM */ - eup->eu_sevar = pci_conf_read ( eup->eu_pcitag, SEEPROM ); + eup->eu_sevar = pci_read_config(eup->eu_pcitag, SEEPROM, 4); DELAY ( SEPROM_DELAY ); ack = eup->eu_sevar & SEPROM_DATA; eup->eu_sevar &= ~SEPROM_CLK; - WRITE_SEEPROM (); + WRITE_SEEPROM(); eup->eu_sevar |= SEPROM_DATA; - WRITE_SEEPROM (); + WRITE_SEEPROM(); return ( ack ); } @@ -255,7 +264,7 @@ eni_get_ack ( eup ) * */ static int -eni_get_sebyte( eup ) +eni_get_sebyte(eup) Eni_unit *eup; { int i; @@ -273,7 +282,7 @@ eni_get_sebyte( eup ) /* * Read DATA line from SEPROM */ - data = pci_conf_read ( eup->eu_pcitag, SEEPROM ); + data = pci_read_config(eup->eu_pcitag, SEEPROM, 4); DELAY ( SEPROM_DELAY ); /* (Possibly) mask bit into accumulating value */ if ( data & SEPROM_DATA ) @@ -298,7 +307,7 @@ eni_get_sebyte( eup ) * none * */ -static void +void eni_read_seeprom ( eup ) Eni_unit *eup; { @@ -352,6 +361,7 @@ eni_read_seeprom ( eup ) return; } +#if 0 /* * The kernel has found a device which we are willing to support. * We are now being called to do any necessary work to make the @@ -687,3 +697,4 @@ eni_pci_shutdown ( eup, howto ) } #endif /* BSD < 199506 */ #endif +#endif diff --git a/sys/dev/hea/eni.h b/sys/dev/hea/eni.h index 76b4c9c..54bb04f 100644 --- a/sys/dev/hea/eni.h +++ b/sys/dev/hea/eni.h @@ -442,9 +442,7 @@ struct mbd { */ struct eni_unit { Cmn_unit eu_cmn; /* Common unit stuff */ -#ifdef COMPAT_OLDPCI - pcici_t eu_pcitag; /* PCI tag */ -#endif + void * eu_pcitag; /* PCI tag */ Eni_mem eu_base; /* Adapter memory base */ Eni_mem eu_ram; /* Adapter RAM */ u_long eu_ramsize; diff --git a/sys/dev/hea/eni_buffer.c b/sys/dev/hea/eni_buffer.c index d1946f0..026ce5d 100644 --- a/sys/dev/hea/eni_buffer.c +++ b/sys/dev/hea/eni_buffer.c @@ -38,7 +38,10 @@ #include <sys/param.h> #include <sys/systm.h> #include <sys/socket.h> +#include <sys/malloc.h> + #include <net/if.h> + #include <netatm/port.h> #include <netatm/queue.h> #include <netatm/atm.h> @@ -316,7 +319,7 @@ eni_allocate_buffer ( eup, size ) Mbd *etmp; /* larger then we need - split it */ - etmp = (Mbd *)KM_ALLOC(sizeof(Mbd), M_DEVBUF, M_NOWAIT ); + etmp = (Mbd *)malloc(sizeof(Mbd), M_DEVBUF, M_NOWAIT); if ( etmp == (Mbd *)NULL ) { /* * Couldn't allocate new descriptor. Indicate diff --git a/sys/dev/hea/hea_freebsd.c b/sys/dev/hea/hea_freebsd.c new file mode 100644 index 0000000..c8b0f83 --- /dev/null +++ b/sys/dev/hea/hea_freebsd.c @@ -0,0 +1,357 @@ +/*- + * Copyright (c) 2002 Matthew N. Dodd <winter@jurai.net> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * + * =================================== + * HARP | Host ATM Research Platform + * =================================== + * + * + * This Host ATM Research Platform ("HARP") file (the "Software") is + * made available by Network Computing Services, Inc. ("NetworkCS") + * "AS IS". NetworkCS does not provide maintenance, improvements or + * support of any kind. + * + * NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, + * INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE + * SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE. + * In no event shall NetworkCS be responsible for any damages, including + * but not limited to consequential damages, arising from or relating to + * any use of the Software or related support. + * + * Copyright 1994-1998 Network Computing Services, Inc. + * + * Copies of this Software may be made, however, the above copyright + * notice must be reproduced on all copies. + * + */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/socket.h> +#include <sys/socketvar.h> +#include <sys/kernel.h> +#include <sys/lock.h> +#include <sys/malloc.h> +#include <sys/socket.h> +#include <sys/sysctl.h> + +#include <sys/bus.h> +#include <sys/conf.h> + +#include <sys/module.h> +#include <machine/bus_memio.h> +#include <machine/bus.h> +#include <machine/resource.h> +#include <sys/rman.h> + +#include <net/if.h> +#include <netatm/port.h> +#include <netatm/queue.h> +#include <netatm/atm.h> +#include <netatm/atm_sys.h> +#include <netatm/atm_sap.h> +#include <netatm/atm_cm.h> +#include <netatm/atm_if.h> +#include <netatm/atm_stack.h> +#include <netatm/atm_pcb.h> +#include <netatm/atm_var.h> + +#include <dev/hea/eni_stats.h> +#include <dev/hea/eni.h> +#include <dev/hea/eni_suni.h> +#include <dev/hea/eni_var.h> + +#include <dev/hea/hea_freebsd.h> + +devclass_t hea_devclass; + +int +hea_alloc (device_t dev) +{ + struct hea_softc *sc; + int error; + + sc = (struct hea_softc *)device_get_softc(dev); + error = 0; + + sc->mem = bus_alloc_resource(dev, sc->mem_type, &sc->mem_rid, + 0, ~0, 1, RF_ACTIVE); + if (sc->mem == NULL) { + device_printf(dev, "Unable to allocate memory resource.\n"); + error = ENXIO; + goto fail; + } + + sc->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->irq_rid, + 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); + if (sc->irq == NULL) { + device_printf(dev, "Unable to allocate interrupt resource.\n"); + error = ENXIO; + goto fail; + } + + mtx_init(&sc->mtx, device_get_nameunit(dev), "Interrupt lock", MTX_DEF|MTX_RECURSE); + +fail: + return (error); +} + +int +hea_free (device_t dev) +{ + struct hea_softc *sc; + + sc = (struct hea_softc *)device_get_softc(dev); + if (sc->mem) + bus_release_resource(dev, sc->mem_type, sc->mem_rid, sc->mem); + if (sc->irq_ih) + bus_teardown_intr(dev, sc->irq, sc->irq_ih); + if (sc->irq) + bus_release_resource(dev, SYS_RES_IRQ, sc->irq_rid, sc->irq); + + /* + * Destroy the mutex. + */ + if (mtx_initialized(&sc->mtx) != 0) + mtx_destroy(&sc->mtx); + + return (0); +} + +int +hea_attach (device_t dev) +{ + struct hea_softc *sc; + Eni_unit *eup; + int error; + long val; + + sc = (struct hea_softc *)device_get_softc(dev); + eup = &sc->eup; + error = 0; + + /* + * Start initializing it + */ + eup->eu_unit = device_get_unit(dev); + eup->eu_mtu = ENI_IFF_MTU; + eup->eu_pcitag = dev; + eup->eu_ioctl = eni_atm_ioctl; + eup->eu_instvcc = eni_instvcc; + eup->eu_openvcc = eni_openvcc; + eup->eu_closevcc = eni_closevcc; + eup->eu_output = eni_output; + eup->eu_vcc_pool = &eni_vcc_pool; + eup->eu_nif_pool = &eni_nif_pool; + + /* + * Map memory structures into adapter space + */ + eup->eu_suni = (Eni_mem)(eup->eu_base + SUNI_OFFSET); + eup->eu_midway = (Eni_mem)(eup->eu_base + MIDWAY_OFFSET); + eup->eu_vcitbl = (VCI_Table *)(eup->eu_base + VCITBL_OFFSET); + eup->eu_rxdma = (Eni_mem)(eup->eu_base + RXQUEUE_OFFSET); + eup->eu_txdma = (Eni_mem)(eup->eu_base + TXQUEUE_OFFSET); + eup->eu_svclist = (Eni_mem)(eup->eu_base + SVCLIST_OFFSET); + eup->eu_servread = 0; + + /* + * Reset the midway chip + */ + eup->eu_midway[MIDWAY_ID] = MIDWAY_RESET; + + /* + * Size and test adapter memory. Initialize our adapter memory + * allocater. + */ + if (eni_init_memory(eup) < 0) { + /* + * Adapter memory test failed. Clean up and + * return. + */ + device_printf(dev, "memory test failed.\n"); + error = ENXIO; + goto fail; + } + + /* + * Read the contents of the SEEPROM + */ + eni_read_seeprom(eup); + /* + * Copy MAC address to PIF and config structures + */ + bcopy((caddr_t)&eup->eu_seeprom[SEPROM_MAC_OFF], + (caddr_t)&eup->eu_pif.pif_macaddr, + sizeof(struct mac_addr)); + eup->eu_config.ac_macaddr = eup->eu_pif.pif_macaddr; + + /* + * Copy serial number into config space + */ + eup->eu_config.ac_serial = + ntohl(*(u_long *)&eup->eu_seeprom[SEPROM_SN_OFF]); + + /* + * Setup some of the adapter configuration + */ + /* + * Get MIDWAY ID + */ + val = eup->eu_midway[MIDWAY_ID]; + eup->eu_config.ac_vendor = VENDOR_ENI; + eup->eu_config.ac_vendapi = VENDAPI_ENI_1; + eup->eu_config.ac_device = DEV_ENI_155P; + eup->eu_config.ac_media = val & MEDIA_MASK ? MEDIA_UTP155 : MEDIA_OC3C; + eup->eu_pif.pif_pcr = ATM_PCR_OC3C; + + /* + * Make a hw version number from the ID register values. + * Format: {Midway ID}.{Mother board ID}.{Daughter board ID} + */ + snprintf(eup->eu_config.ac_hard_vers, + sizeof(eup->eu_config.ac_hard_vers), + "%ld/%ld/%ld", + (val >> ID_SHIFT) & ID_MASK, + (val >> MID_SHIFT) & MID_MASK, + (val >> DID_SHIFT) & DID_MASK ); + + /* + * There is no software version number + */ + eup->eu_config.ac_firm_vers[0] = '\0'; + + /* + * Save device ram info for user-level programs + * NOTE: This really points to start of EEPROM + * and includes all the device registers in the + * lower 2 Megabytes. + */ + eup->eu_config.ac_ram = (long)eup->eu_base; + eup->eu_config.ac_ramsize = eup->eu_ramsize + ENI_REG_SIZE; + + /* + * Setup max VPI/VCI values + */ + eup->eu_pif.pif_maxvpi = ENI_MAX_VPI; + eup->eu_pif.pif_maxvci = ENI_MAX_VCI; + + /* + * Register this interface with ATM core services + */ + error = atm_physif_register((Cmn_unit *)eup, ENI_DEV_NAME, eni_services); + if (error) + goto fail; + + eni_units[device_get_unit(dev)] = eup; + + /* + * Initialize driver processing + */ + error = eni_init(eup); + if (error) { + device_printf(dev, "adapter init failed.\n"); + goto fail; + } + +fail: + return (error); +} + +int +hea_detach (device_t dev) +{ + struct hea_softc *sc; + Eni_unit *eup; + int error; + + sc = (struct hea_softc *)device_get_softc(dev); + eup = &sc->eup; + error = 0; + + /* + * De-Register this interface with ATM core services + */ + error = atm_physif_deregister((Cmn_unit *)eup); + + /* + * Reset the board. + */ + hea_reset(dev); + + hea_free(dev); + + return (error); +} + +void +hea_intr (void * arg) +{ + struct hea_softc *sc; + + sc = (struct hea_softc *)arg; + + HEA_LOCK(sc); + eni_intr(&sc->eup); + HEA_UNLOCK(sc); + + return; +} + +void +hea_reset (device_t dev) +{ + struct hea_softc *sc; + Eni_unit *eup; + + sc = (struct hea_softc *)device_get_softc(dev); + eup = &sc->eup; + + /* + * We should really close down any open VCI's and + * release all memory (TX and RX) buffers. For now, + * we assume we're shutting the card down for good. + */ + + if (eup->eu_midway) { + /* + * Issue RESET command to Midway chip + */ + eup->eu_midway[MIDWAY_ID] = MIDWAY_RESET; + + /* + * Delay to allow everything to terminate + */ + DELAY(MIDWAY_DELAY); + } + + return; +} diff --git a/sys/dev/hea/hea_freebsd.h b/sys/dev/hea/hea_freebsd.h new file mode 100644 index 0000000..42e24ff --- /dev/null +++ b/sys/dev/hea/hea_freebsd.h @@ -0,0 +1,59 @@ +/*- + * Copyright (c) 2002 Matthew N. Dodd <winter@jurai.net> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +struct hea_softc { + device_t dev; + + struct resource * mem; + int mem_rid; + int mem_type; + + struct resource * irq; + int irq_rid; + void * irq_ih; + + struct mtx mtx; + + Eni_unit eup; +}; + +#define HEA_LOCK(_sc) mtx_lock(&(_sc)->mtx) +#define HEA_UNLOCK(_sc) mtx_unlock(&(_sc)->mtx) + +extern devclass_t hea_devclass; + +int hea_alloc (device_t); +int hea_free (device_t); + +int hea_attach (device_t); +int hea_detach (device_t); + +void hea_intr (void *); +void hea_reset (device_t); + +void eni_read_seeprom(Eni_unit *); diff --git a/sys/dev/hea/hea_pci.c b/sys/dev/hea/hea_pci.c new file mode 100644 index 0000000..391db8b --- /dev/null +++ b/sys/dev/hea/hea_pci.c @@ -0,0 +1,224 @@ +/*- + * Copyright (c) 2002 Matthew N. Dodd <winter@jurai.net> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * + * =================================== + * HARP | Host ATM Research Platform + * =================================== + * + * + * This Host ATM Research Platform ("HARP") file (the "Software") is + * made available by Network Computing Services, Inc. ("NetworkCS") + * "AS IS". NetworkCS does not provide maintenance, improvements or + * support of any kind. + * + * NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, + * INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE + * SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE. + * In no event shall NetworkCS be responsible for any damages, including + * but not limited to consequential damages, arising from or relating to + * any use of the Software or related support. + * + * Copyright 1994-1998 Network Computing Services, Inc. + * + * Copies of this Software may be made, however, the above copyright + * notice must be reproduced on all copies. + * + */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/socket.h> +#include <sys/socketvar.h> +#include <sys/kernel.h> +#include <sys/lock.h> +#include <sys/malloc.h> +#include <sys/socket.h> +#include <sys/sysctl.h> + +#include <sys/bus.h> +#include <sys/conf.h> + +#include <sys/module.h> +#include <machine/bus_memio.h> +#include <machine/bus.h> +#include <machine/resource.h> +#include <sys/rman.h> + +#include <net/if.h> +#include <netatm/port.h> +#include <netatm/queue.h> +#include <netatm/atm.h> +#include <netatm/atm_sys.h> +#include <netatm/atm_sap.h> +#include <netatm/atm_cm.h> +#include <netatm/atm_if.h> +#include <netatm/atm_stack.h> +#include <netatm/atm_pcb.h> +#include <netatm/atm_var.h> + +#include <dev/pci/pcireg.h> +#include <dev/pci/pcivar.h> + +#include <dev/hea/eni_stats.h> +#include <dev/hea/eni.h> +#include <dev/hea/eni_suni.h> +#include <dev/hea/eni_var.h> + +#include <dev/hea/hea_freebsd.h> + +static int hea_pci_probe(device_t); +static int hea_pci_attach(device_t); + +#define ENI_VENDORID 0x111A +#define ENI_DEVICEID 0x0002 + +struct hea_pci_type { + u_int16_t vid; + u_int16_t did; + char * name; +} hea_pci_devs[] = { + { ENI_VENDORID, ENI_DEVICEID, "Efficent Networks ENI ATM Adapter" }, + { 0, 0, NULL }, +}; + +static int +hea_pci_probe (dev) + device_t dev; +{ + struct hea_pci_type * t = hea_pci_devs; + + while (t->name != NULL) { + if ((pci_get_vendor(dev) == t->vid) && + (pci_get_device(dev) == t->did)) { + device_set_desc(dev, t->name); + return(0); + } + t++; + } + + return(ENXIO); +} + +static int +hea_pci_attach (dev) + device_t dev; +{ + struct hea_softc *sc; + Eni_unit *eup; + u_int32_t command; + vm_offset_t va; + int error; + + sc = device_get_softc(dev); + eup = &sc->eup; + error = 0; + + pci_enable_busmaster(dev); + pci_enable_io(dev, SYS_RES_MEMORY); + + command = pci_read_config(dev, PCIR_COMMAND, 2); + if ((command & PCIM_CMD_BUSMASTEREN) == 0) { + device_printf(dev, "Unable to enable PCI busmastering.\n"); + error = ENXIO; + goto fail; + } + if ((command & PCIM_CMD_MEMEN) == 0) { + device_printf(dev, "Unable to enable PCI memory resources.\n"); + error = ENXIO; + goto fail; + } + + sc->mem_rid = PCIR_MAPS; + sc->mem_type = SYS_RES_MEMORY; + sc->irq_rid = 0; + + error = hea_alloc(dev); + if (error) { + device_printf(dev, "hea_alloc() failed.\n"); + goto fail; + } + + va = (vm_offset_t) rman_get_virtual(sc->mem); + + eup->eu_base = (Eni_mem)va; + eup->eu_ram = (Eni_mem)(eup->eu_base + RAM_OFFSET); + + /* + * Convert Endianess on DMA + */ + command = pci_read_config(dev, PCI_CONTROL_REG, 4); + command |= ENDIAN_SWAP_DMA; + pci_write_config(dev, PCI_CONTROL_REG, command, 4); + + /* + * Map interrupt in + */ + error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET, + hea_intr, sc, &sc->irq_ih); + if (error) { + device_printf(dev, "Interrupt handler setup failed.\n"); + goto fail; + } + + eup->eu_config.ac_bustype = BUS_PCI; + eup->eu_config.ac_busslot = (pci_get_bus(dev) << 8)| pci_get_slot(dev); + + error = hea_attach(dev); + if (error) { + device_printf(dev, "hea_attach() failed.\n"); + goto fail; + } + + return (0); +fail: + + hea_detach(dev); + + return (error); +} + +static device_method_t hea_pci_methods[] = { + DEVMETHOD(device_probe, hea_pci_probe), + DEVMETHOD(device_attach, hea_pci_attach), + + DEVMETHOD(device_detach, hea_detach), + + { 0, 0 } +}; + +static driver_t hea_pci_driver = { + "hea", + hea_pci_methods, + sizeof(struct hea_softc) +}; + +DRIVER_MODULE(hea, pci, hea_pci_driver, hea_devclass, 0, 0); +MODULE_DEPEND(hea, pci, 1, 1, 1); |