Overhaul the ACPI PCI bridge driver a bit:

- Add an ACPI PCI-PCI bridge driver (the previous driver just handled
  Host-PCI bridges) that is a PCI driver that is a subclass of the generic
  PCI-PCI bridge driver.  It overrides probe, attach, read_ivar, and
  pci_route_interrupt.
  - The probe routine only succeeds if our parent is an ACPI PCI bus which
    we test for by seeing if we can read our ACPI_HANDLE as an ivar.
  - The attach routine saves a copy of our handle and calls the new
    acpi_pcib_attach_common() function described below.
  - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an
    ivar to return the ACPI_HANDLE of the bus this bridge represents.
  - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing
    Table) from the bridge device's softc and passes it off to
    acpi_pcib_route_interrupt() to route the interrupt.
- Split the old ACPI Host-PCI bridge driver into two pieces.  Part of
  the attach routine and most of the route_interrupt routine remain in
  acpi_pcib.c and are shared by both ACPI PCI bridge drivers.
  - The attach routine verifies the PCI bridge is present, reads in
    the _PRT for the bridge, and attaches the child PCI bus.
  - The route_interrupt routine uses the passed in _PRT to route a PCI
    interrupt.
  The rest of the driver is the ACPI Host-PCI bridge specific bits that
  live in acpi_pcib_acpi.c.
  - We no longer duplicate pcib_maxslots but use it directly.
  - The driver now uses the pcib devclass instead of its own devclass.
    This means that PCI busses are now only children of pcib devices.
  - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar
    of the child bus.
  - Fetch the _PRT for routing PCI interrupts directly from our softc
    instead of walking the devclass to find ourself and then fetch our
    own softc.

With this change and the new ACPI PCI bus driver, ACPI can now properly
route interrupts for devices behind PCI-PCI bridges.  That is, the
Itanium2 with like 10 PCI busses can now boot ok and route all the PCI
interrupts.  Hopefully this will also fix problems people are having with
CardBus bridges behind PCI-PCI bridges not properly routing interrupts
when ACPI is used.

Tested on:	i386, ia64

1 files changed, 37 insertions, 0 deletions

diff --git a/sys/dev/acpica/acpi_pcibvar.h b/sys/dev/acpica/acpi_pcibvar.h
new file mode 100644
index 0000000..40813bb
--- /dev/null
+++ b/sys/dev/acpica/acpi_pcibvar.h
@@ -0,0 +1,37 @@
+/*-
+ * Copyright (c) 2000 Michael Smith
+ * Copyright (c) 2000 BSDi
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+#ifndef	_ACPI_PCIBVAR_H_
+#define	_ACPI_PCIBVAR_H_
+
+int	acpi_pcib_attach(device_t bus, ACPI_BUFFER *prt, int busno);
+int	acpi_pcib_route_interrupt(device_t pcib, device_t dev, int pin,
+    ACPI_BUFFER *ptrbuf);
+
+#endif