Merge ACPICA 20111123.

1 files changed, 258 insertions, 35 deletions

diff --git a/sys/contrib/dev/acpica/utilities/utresrc.c b/sys/contrib/dev/acpica/utilities/utresrc.c
index 34920be..e0a9bf7 100644
--- a/sys/contrib/dev/acpica/utilities/utresrc.c
+++ b/sys/contrib/dev/acpica/utilities/utresrc.c
@@ -46,7 +46,7 @@
 
 #include <contrib/dev/acpica/include/acpi.h>
 #include <contrib/dev/acpica/include/accommon.h>
-#include <contrib/dev/acpica/include/amlresrc.h>
+#include <contrib/dev/acpica/include/acresrc.h>
 
 
 #define _COMPONENT          ACPI_UTILITIES
@@ -179,6 +179,154 @@ const char                      *AcpiGbl_TypDecode[] =
     "TypeF"
 };
 
+const char                      *AcpiGbl_PpcDecode[] =
+{
+    "PullDefault",
+    "PullUp",
+    "PullDown",
+    "PullNone"
+};
+
+const char                      *AcpiGbl_IorDecode[] =
+{
+    "IoRestrictionNone",
+    "IoRestrictionInputOnly",
+    "IoRestrictionOutputOnly",
+    "IoRestrictionNoneAndPreserve"
+};
+
+const char                      *AcpiGbl_DtsDecode[] =
+{
+    "Width8bit",
+    "Width16bit",
+    "Width32bit",
+    "Width64bit",
+    "Width128bit",
+    "Width256bit",
+};
+
+/* GPIO connection type */
+
+const char                      *AcpiGbl_CtDecode[] =
+{
+    "Interrupt",
+    "I/O"
+};
+
+/* Serial bus type */
+
+const char                      *AcpiGbl_SbtDecode[] =
+{
+    "/* UNKNOWN serial bus type */",
+    "I2C",
+    "SPI",
+    "UART"
+};
+
+/* I2C serial bus access mode */
+
+const char                      *AcpiGbl_AmDecode[] =
+{
+    "AddressingMode7Bit",
+    "AddressingMode10Bit"
+};
+
+/* I2C serial bus slave mode */
+
+const char                      *AcpiGbl_SmDecode[] =
+{
+    "ControllerInitiated",
+    "DeviceInitiated"
+};
+
+/* SPI serial bus wire mode */
+
+const char                      *AcpiGbl_WmDecode[] =
+{
+    "FourWireMode",
+    "ThreeWireMode"
+};
+
+/* SPI serial clock phase */
+
+const char                      *AcpiGbl_CphDecode[] =
+{
+    "ClockPhaseFirst",
+    "ClockPhaseSecond"
+};
+
+/* SPI serial bus clock polarity */
+
+const char                      *AcpiGbl_CpoDecode[] =
+{
+    "ClockPolarityLow",
+    "ClockPolarityHigh"
+};
+
+/* SPI serial bus device polarity */
+
+const char                      *AcpiGbl_DpDecode[] =
+{
+    "PolarityLow",
+    "PolarityHigh"
+};
+
+/* UART serial bus endian */
+
+const char                      *AcpiGbl_EdDecode[] =
+{
+    "LittleEndian",
+    "BigEndian"
+};
+
+/* UART serial bus bits per byte */
+
+const char                      *AcpiGbl_BpbDecode[] =
+{
+    "DataBitsFive",
+    "DataBitsSix",
+    "DataBitsSeven",
+    "DataBitsEight",
+    "DataBitsNine",
+    "/* UNKNOWN Bits per byte */",
+    "/* UNKNOWN Bits per byte */",
+    "/* UNKNOWN Bits per byte */"
+};
+
+/* UART serial bus stop bits */
+
+const char                      *AcpiGbl_SbDecode[] =
+{
+    "StopBitsNone",
+    "StopBitsOne",
+    "StopBitsOnePlusHalf",
+    "StopBitsTwo"
+};
+
+/* UART serial bus flow control */
+
+const char                      *AcpiGbl_FcDecode[] =
+{
+    "FlowControlNone",
+    "FlowControlHardware",
+    "FlowControlXON",
+    "/* UNKNOWN flow control keyword */"
+};
+
+/* UART serial bus parity type */
+
+const char                      *AcpiGbl_PtDecode[] =
+{
+    "ParityTypeNone",
+    "ParityTypeEven",
+    "ParityTypeOdd",
+    "ParityTypeMark",
+    "ParityTypeSpace",
+    "/* UNKNOWN parity keyword */",
+    "/* UNKNOWN parity keyword */",
+    "/* UNKNOWN parity keyword */"
+};
+
 #endif
 
 
@@ -200,7 +348,7 @@ const UINT8                 AcpiGbl_ResourceAmlSizes[] =
     ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_DEPENDENT),
     ACPI_AML_SIZE_SMALL (AML_RESOURCE_IO),
     ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_IO),
-    0,
+    ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_DMA),
     0,
     0,
     0,
@@ -220,7 +368,18 @@ const UINT8                 AcpiGbl_ResourceAmlSizes[] =
     ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS16),
     ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_IRQ),
     ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS64),
-    ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_ADDRESS64)
+    ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_ADDRESS64),
+    ACPI_AML_SIZE_LARGE (AML_RESOURCE_GPIO),
+    0,
+    ACPI_AML_SIZE_LARGE (AML_RESOURCE_COMMON_SERIALBUS),
+};
+
+const UINT8                 AcpiGbl_ResourceAmlSerialBusSizes[] =
+{
+    0,
+    ACPI_AML_SIZE_LARGE (AML_RESOURCE_I2C_SERIALBUS),
+    ACPI_AML_SIZE_LARGE (AML_RESOURCE_SPI_SERIALBUS),
+    ACPI_AML_SIZE_LARGE (AML_RESOURCE_UART_SERIALBUS),
 };
 
 
@@ -238,35 +397,49 @@ static const UINT8          AcpiGbl_ResourceTypes[] =
     0,
     0,
     0,
-    ACPI_SMALL_VARIABLE_LENGTH,
-    ACPI_FIXED_LENGTH,
-    ACPI_SMALL_VARIABLE_LENGTH,
-    ACPI_FIXED_LENGTH,
-    ACPI_FIXED_LENGTH,
-    ACPI_FIXED_LENGTH,
-    0,
+    ACPI_SMALL_VARIABLE_LENGTH,     /* 04 IRQ */
+    ACPI_FIXED_LENGTH,              /* 05 DMA */
+    ACPI_SMALL_VARIABLE_LENGTH,     /* 06 StartDependentFunctions */
+    ACPI_FIXED_LENGTH,              /* 07 EndDependentFunctions */
+    ACPI_FIXED_LENGTH,              /* 08 IO */
+    ACPI_FIXED_LENGTH,              /* 09 FixedIO */
+    ACPI_FIXED_LENGTH,              /* 0A FixedDMA */
     0,
     0,
     0,
-    ACPI_VARIABLE_LENGTH,
-    ACPI_FIXED_LENGTH,
+    ACPI_VARIABLE_LENGTH,           /* 0E VendorShort */
+    ACPI_FIXED_LENGTH,              /* 0F EndTag */
 
     /* Large descriptors */
 
     0,
-    ACPI_FIXED_LENGTH,
-    ACPI_FIXED_LENGTH,
+    ACPI_FIXED_LENGTH,              /* 01 Memory24 */
+    ACPI_FIXED_LENGTH,              /* 02 GenericRegister */
+    0,
+    ACPI_VARIABLE_LENGTH,           /* 04 VendorLong */
+    ACPI_FIXED_LENGTH,              /* 05 Memory32 */
+    ACPI_FIXED_LENGTH,              /* 06 Memory32Fixed */
+    ACPI_VARIABLE_LENGTH,           /* 07 Dword* address */
+    ACPI_VARIABLE_LENGTH,           /* 08 Word* address */
+    ACPI_VARIABLE_LENGTH,           /* 09 ExtendedIRQ */
+    ACPI_VARIABLE_LENGTH,           /* 0A Qword* address */
+    ACPI_FIXED_LENGTH,              /* 0B Extended* address */
+    ACPI_VARIABLE_LENGTH,           /* 0C Gpio* */
     0,
-    ACPI_VARIABLE_LENGTH,
-    ACPI_FIXED_LENGTH,
-    ACPI_FIXED_LENGTH,
-    ACPI_VARIABLE_LENGTH,
-    ACPI_VARIABLE_LENGTH,
-    ACPI_VARIABLE_LENGTH,
-    ACPI_VARIABLE_LENGTH,
-    ACPI_FIXED_LENGTH
+    ACPI_VARIABLE_LENGTH            /* 0E *SerialBus */
 };
 
+/*
+ * For the iASL compiler/disassembler, we don't want any error messages
+ * because the disassembler uses the resource validation code to determine
+ * if Buffer objects are actually Resource Templates.
+ */
+#ifdef ACPI_ASL_COMPILER
+#define ACPI_RESOURCE_ERROR(plist)
+#else
+#define ACPI_RESOURCE_ERROR(plist)  ACPI_ERROR(plist)
+#endif
+
 
 /*******************************************************************************
  *
@@ -297,6 +470,7 @@ AcpiUtWalkAmlResources (
     UINT8                   ResourceIndex;
     UINT32                  Length;
     UINT32                  Offset = 0;
+    UINT8                   EndTag[2] = {0x79, 0x00};
 
 
     ACPI_FUNCTION_TRACE (UtWalkAmlResources);
@@ -322,6 +496,10 @@ AcpiUtWalkAmlResources (
         Status = AcpiUtValidateResource (Aml, &ResourceIndex);
         if (ACPI_FAILURE (Status))
         {
+            /*
+             * Exit on failure. Cannot continue because the descriptor length
+             * may be bogus also.
+             */
             return_ACPI_STATUS (Status);
         }
 
@@ -336,7 +514,7 @@ AcpiUtWalkAmlResources (
             Status = UserFunction (Aml, Length, Offset, ResourceIndex, Context);
             if (ACPI_FAILURE (Status))
             {
-                return (Status);
+                return_ACPI_STATUS (Status);
             }
         }
 
@@ -371,7 +549,19 @@ AcpiUtWalkAmlResources (
 
     /* Did not find an EndTag descriptor */
 
-    return (AE_AML_NO_RESOURCE_END_TAG);
+    if (UserFunction)
+    {
+        /* Insert an EndTag anyway. AcpiRsGetListLength always leaves room */
+
+        (void) AcpiUtValidateResource (EndTag, &ResourceIndex);
+        Status = UserFunction (EndTag, 2, Offset, ResourceIndex, Context);
+        if (ACPI_FAILURE (Status))
+        {
+            return_ACPI_STATUS (Status);
+        }
+    }
+
+    return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
 }
 
 
@@ -396,6 +586,7 @@ AcpiUtValidateResource (
     void                    *Aml,
     UINT8                   *ReturnIndex)
 {
+    AML_RESOURCE            *AmlResource;
     UINT8                   ResourceType;
     UINT8                   ResourceIndex;
     ACPI_RS_LENGTH          ResourceLength;
@@ -420,7 +611,7 @@ AcpiUtValidateResource (
 
         if (ResourceType > ACPI_RESOURCE_NAME_LARGE_MAX)
         {
-            return (AE_AML_INVALID_RESOURCE_TYPE);
+            goto InvalidResource;
         }
 
         /*
@@ -439,17 +630,18 @@ AcpiUtValidateResource (
             ((ResourceType & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3);
     }
 
-    /* Check validity of the resource type, zero indicates name is invalid */
-
+    /*
+     * Check validity of the resource type, via AcpiGbl_ResourceTypes. Zero
+     * indicates an invalid resource.
+     */
     if (!AcpiGbl_ResourceTypes[ResourceIndex])
     {
-        return (AE_AML_INVALID_RESOURCE_TYPE);
+        goto InvalidResource;
     }
 
-
     /*
-     * 2) Validate the ResourceLength field. This ensures that the length
-     *    is at least reasonable, and guarantees that it is non-zero.
+     * Validate the ResourceLength field. This ensures that the length
+     * is at least reasonable, and guarantees that it is non-zero.
      */
     ResourceLength = AcpiUtGetResourceLength (Aml);
     MinimumResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex];
@@ -464,7 +656,7 @@ AcpiUtValidateResource (
 
         if (ResourceLength != MinimumResourceLength)
         {
-            return (AE_AML_BAD_RESOURCE_LENGTH);
+            goto BadResourceLength;
         }
         break;
 
@@ -474,7 +666,7 @@ AcpiUtValidateResource (
 
         if (ResourceLength < MinimumResourceLength)
         {
-            return (AE_AML_BAD_RESOURCE_LENGTH);
+            goto BadResourceLength;
         }
         break;
 
@@ -485,7 +677,7 @@ AcpiUtValidateResource (
         if ((ResourceLength > MinimumResourceLength) ||
             (ResourceLength < (MinimumResourceLength - 1)))
         {
-            return (AE_AML_BAD_RESOURCE_LENGTH);
+            goto BadResourceLength;
         }
         break;
 
@@ -493,7 +685,22 @@ AcpiUtValidateResource (
 
         /* Shouldn't happen (because of validation earlier), but be sure */
 
-        return (AE_AML_INVALID_RESOURCE_TYPE);
+        goto InvalidResource;
+    }
+
+    AmlResource = ACPI_CAST_PTR (AML_RESOURCE, Aml);
+    if (ResourceType == ACPI_RESOURCE_NAME_SERIAL_BUS)
+    {
+        /* Validate the BusType field */
+
+        if ((AmlResource->CommonSerialBus.Type == 0) ||
+            (AmlResource->CommonSerialBus.Type > AML_RESOURCE_MAX_SERIALBUSTYPE))
+        {
+            ACPI_RESOURCE_ERROR ((AE_INFO,
+                "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X",
+                AmlResource->CommonSerialBus.Type));
+            return (AE_AML_INVALID_RESOURCE_TYPE);
+        }
     }
 
     /* Optionally return the resource table index */
@@ -504,6 +711,22 @@ AcpiUtValidateResource (
     }
 
     return (AE_OK);
+
+
+InvalidResource:
+
+    ACPI_RESOURCE_ERROR ((AE_INFO,
+        "Invalid/unsupported resource descriptor: Type 0x%2.2X",
+        ResourceType));
+    return (AE_AML_INVALID_RESOURCE_TYPE);
+
+BadResourceLength:
+
+    ACPI_RESOURCE_ERROR ((AE_INFO,
+        "Invalid resource descriptor length: Type "
+        "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X",
+        ResourceType, ResourceLength, MinimumResourceLength));
+    return (AE_AML_BAD_RESOURCE_LENGTH);
 }