Reviewed by: Doug Rabson

Submitted by:	nsouch
Adding I2C and SMB entries to LINT, CONFIGVERS modified in Makefile.i386

3 files changed, 44 insertions, 5 deletions

diff --git a/sys/conf/Makefile.i386 b/sys/conf/Makefile.i386
index fc47d5a..942490c 100644
--- a/sys/conf/Makefile.i386
+++ b/sys/conf/Makefile.i386
@@ -1,7 +1,7 @@
 # Makefile.i386 -- with config changes.
 # Copyright 1990 W. Jolitz
 #	from: @(#)Makefile.i386	7.1 5/10/91
-#	$Id: Makefile.i386,v 1.119 1998/08/31 11:43:26 jb Exp $
+#	$Id: Makefile.i386,v 1.120 1998/09/01 00:11:02 jb Exp $
 #
 # Makefile for FreeBSD
 #
@@ -17,7 +17,7 @@
 #
 
 # Which version of config(8) is required.
-%VERSREQ=	300005
+%VERSREQ=	300006
 
 KERNFORMAT?=	aout
 
@@ -111,6 +111,8 @@ SYSTEM_LD_TAIL= @size -elf ${.TARGET} ; chmod 755 ${.TARGET}
 
 %SFILES
 
+%MFILES
+
 %LOAD
 
 %CLEAN
diff --git a/sys/conf/Makefile.powerpc b/sys/conf/Makefile.powerpc
index fc47d5a..942490c 100644
--- a/sys/conf/Makefile.powerpc
+++ b/sys/conf/Makefile.powerpc
@@ -1,7 +1,7 @@
 # Makefile.i386 -- with config changes.
 # Copyright 1990 W. Jolitz
 #	from: @(#)Makefile.i386	7.1 5/10/91
-#	$Id: Makefile.i386,v 1.119 1998/08/31 11:43:26 jb Exp $
+#	$Id: Makefile.i386,v 1.120 1998/09/01 00:11:02 jb Exp $
 #
 # Makefile for FreeBSD
 #
@@ -17,7 +17,7 @@
 #
 
 # Which version of config(8) is required.
-%VERSREQ=	300005
+%VERSREQ=	300006
 
 KERNFORMAT?=	aout
 
@@ -111,6 +111,8 @@ SYSTEM_LD_TAIL= @size -elf ${.TARGET} ; chmod 755 ${.TARGET}
 
 %SFILES
 
+%MFILES
+
 %LOAD
 
 %CLEAN
diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index cca83c9..158e9f8 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -2,7 +2,7 @@
 # LINT -- config file for checking all the sources, tries to pull in
 #	as much of the source tree as it can.
 #
-#	$Id: LINT,v 1.455 1998/08/27 01:30:53 obrien Exp $
+#	$Id: LINT,v 1.456 1998/08/27 02:37:11 jkh Exp $
 #
 # NB: You probably don't want to try running a kernel built from this
 # file.  Instead, you should start from GENERIC, and add options from
@@ -1446,6 +1446,41 @@ device		pcic1 at card?
 options		POWERFAIL_NMI	# make it beep instead of panicing
 
 #
+# SMB bus
+#
+# System Management Bus support provided by the 'smbus' device.
+#
+# Supported devices:
+# smb	standard io
+#
+# Supported interfaces:
+# iicsmb I2C to SMB bridge
+#
+controller smbus0
+
+device smb0	at smbus?
+
+#
+# I2C Bus
+#
+# Philips i2c bus support is provided by the `iicbus' device.
+#
+# Supported devices:
+# ic	i2c network interface
+# iic	i2c standard io
+#
+# Supported interfaces:
+# pcf	Philips PCF8584 ISA-bus controller
+#
+controller iicbus0
+
+device ic0	at iicbus?
+device iic0	at iicbus?
+device iicsmb0	at iicbus?
+
+controller pcf0	at isa? port 0x320 net irq 5 vector pcfintr
+
+#
 # Parallel-Port Bus
 #
 # Parallel port bus support is provided by the `ppbus' device.