Move most everything back to a MI NOTES, and use "nodevice" in MD NOTES

Where needed.  Use 'sed' for now in place of "nooptions".  Add a sparc64
MD NOTES.

Reviewed by:	arch@

1 files changed, 183 insertions, 0 deletions

diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index 06af805..f03279a 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -1049,6 +1049,62 @@ options 	MSGBUF_SIZE=40960
 # Mandatory devices:
 #
 
+# The keyboard controller; it controls the keyboard and the PS/2 mouse.
+device		atkbdc
+hint.atkbdc.0.at="isa"
+hint.atkbdc.0.port="0x060"
+
+# The AT keyboard
+device		atkbd
+hint.atkbd.0.at="atkbdc"
+hint.atkbd.0.irq="1"
+
+# Options for atkbd:
+options 	ATKBD_DFLT_KEYMAP	# specify the built-in keymap
+makeoptions	ATKBD_DFLT_KEYMAP=jp.106
+
+# These options are valid for other keyboard drivers as well.
+options 	KBD_DISABLE_KEYMAP_LOAD	# refuse to load a keymap
+options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
+
+# `flags' for atkbd:
+#       0x01    Force detection of keyboard, else we always assume a keyboard
+#       0x02    Don't reset keyboard, useful for some newer ThinkPads
+#	0x03	Force detection and avoid reset, might help with certain
+#		dockingstations
+#       0x04    Old-style (XT) keyboard support, useful for older ThinkPads
+
+# PS/2 mouse
+device		psm
+hint.psm.0.at="atkbdc"
+hint.psm.0.irq="12"
+
+# Options for psm:
+options 	PSM_HOOKRESUME		#hook the system resume event, useful
+					#for some laptops
+options 	PSM_RESETAFTERSUSPEND	#reset the device at the resume event
+
+# Video card driver for VGA adapters.
+device		vga
+hint.vga.0.at="isa"
+
+# Options for vga:
+# Try the following option if the mouse pointer is not drawn correctly
+# or font does not seem to be loaded properly.  May cause flicker on
+# some systems.
+options 	VGA_ALT_SEQACCESS
+
+# If you can dispense with some vga driver features, you may want to
+# use the following options to save some memory.
+#options 	VGA_NO_FONT_LOADING	# don't save/load font
+#options 	VGA_NO_MODE_CHANGE	# don't change video modes
+
+# Older video cards may require this option for proper operation.
+options 	VGA_SLOW_IOACCESS	# do byte-wide i/o's to TS and GDC regs
+
+# The following option probably won't work with the LCD displays.
+options 	VGA_WIDTH90		# support 90 column modes
+
 options 	FB_DEBUG		# Frame buffer debugging
 
 device		splash			# Splash screen and screen saver support
@@ -1113,6 +1169,7 @@ options 	SC_NO_SUSPEND_VTYSWITCH
 #
 # adv: All Narrow SCSI bus AdvanSys controllers.
 # adw: Second Generation AdvanSys controllers including the ADV940UW.
+# aha: Adaptec 154x/1535/1640
 # ahb: Adaptec 174x EISA controllers
 # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
 #      19160x/29160x, aic7770/aic78xx
@@ -1120,6 +1177,8 @@ options 	SC_NO_SUSPEND_VTYSWITCH
 # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
 # amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
 #      such as the Tekram DC-390(T).
+# bt:  Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
+#      BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
 # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
 #      ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
 #      ISP 12160 Ultra3 SCSI,
@@ -1134,10 +1193,20 @@ options 	SC_NO_SUSPEND_VTYSWITCH
 #      53C876, 53C885,  53C895, 53C895A, 53C896,  53C897, 53C1510D, 
 #      53C1010-33, 53C1010-66.
 # trm: Tekram DC395U/UW/F DC315U adapters.
+# wds: WD7000
 
+#
+# Note that the order is important in order for Buslogic ISA/EISA cards to be
+# probed correctly.
+#
+device		bt
+hint.bt.0.at="isa"
+hint.bt.0.port="0x330"
 device		adv
 hint.adv.0.at="isa"
 device		adw
+device		aha
+hint.aha.0.at="isa"
 device		aic
 hint.aic.0.at="isa"
 device		ahb
@@ -1165,6 +1234,11 @@ device		mpt
 device		ncr
 device		sym
 device		trm
+device		wds
+hint.wds.0.at="isa"
+hint.wds.0.port="0x350"
+hint.wds.0.irq="11"
+hint.wds.0.drq="6"
 
 # The aic7xxx driver will attempt to use memory mapped I/O for all PCI
 # controllers that have it configured only if this option is set. Unfortunately,
@@ -1211,6 +1285,84 @@ options 	ISP_TARGET_MODE=1
 #options 	SYM_SETUP_MAX_LUN	#-Number of LUNs supported
 					# default:8, range:[1..64]
 
+# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
+# controllers (SmartRAID V and VI and later).
+# These controllers require the CAM infrastructure.
+#
+device		asr
+
+# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
+# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
+# The DPT controllers are commonly re-licensed under other brand-names -
+# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
+# Compaq are actually DPT controllers.
+#
+# See src/sys/dev/dpt for debugging and other subtle options.
+#   DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
+#                           instruments are enabled.  The tools in
+#                           /usr/sbin/dpt_* assume these to be enabled.
+#   DPT_HANDLE_TIMEOUTS     Normally device timeouts are handled by the DPT.
+#                           If you ant the driver to handle timeouts, enable
+#                           this option.  If your system is very busy, this
+#                           option will create more trouble than solve.
+#   DPT_TIMEOUT_FACTOR      Used to compute the excessive amount of time to
+#                           wait when timing out with the above option.
+#  DPT_DEBUG_xxxx           These are controllable from sys/dev/dpt/dpt.h
+#  DPT_LOST_IRQ             When enabled, will try, once per second, to catch
+#                           any interrupt that got lost.  Seems to help in some
+#                           DPT-firmware/Motherboard combinations.  Minimal
+#                           cost, great benefit.
+#  DPT_RESET_HBA            Make "reset" actually reset the controller
+#                           instead of fudging it.  Only enable this if you
+#			    are 100% certain you need it.
+
+device		dpt
+
+# DPT options
+#!CAM# options 	DPT_MEASURE_PERFORMANCE
+#!CAM# options 	DPT_HANDLE_TIMEOUTS
+options 	DPT_TIMEOUT_FACTOR=4
+options 	DPT_LOST_IRQ
+options 	DPT_RESET_HBA
+options 	DPT_ALLOW_MEMIO
+
+#
+# Compaq "CISS" RAID controllers (SmartRAID 5* series)
+# These controllers have a SCSI-like interface, and require the
+# CAM infrastructure.
+#
+device		ciss
+
+#
+# Intel Integrated RAID controllers.
+# This driver was developed and is maintained by Intel.  Contacts
+# at Intel for this driver are
+# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
+# "Leubner, Achim" <achim.leubner@intel.com>.
+#
+device		iir
+
+#
+# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
+# firmware.  These controllers have a SCSI-like interface, and require
+# the CAM infrastructure.
+#
+device		mly
+
+#
+# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers.  Only
+# one entry is needed; the code will find and configure all supported
+# controllers.
+#
+device		ida		# Compaq Smart RAID
+device		mlx		# Mylex DAC960
+device		amr		# AMI MegaRAID
+
+#
+# 3ware ATA RAID
+#
+device		twe		# 3ware ATA RAID
+
 #
 # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
 # devices. You only need one "device ata" for it to find all
@@ -1756,6 +1908,34 @@ device		meteor	1
 device		bktr
 
 #
+# PC Card/PCMCIA
+# (OLDCARD)
+#
+# card: pccard slots
+# pcic: isa/pccard bridge
+#device		pcic
+#hint.pcic.0.at="isa"
+#hint.pcic.1.at="isa"
+#device		card	1
+
+#
+# PC Card/PCMCIA and Cardbus
+# (NEWCARD)
+#
+# Note that NEWCARD and OLDCARD are incompatible.  Do not use both at the same
+# time.
+#
+# pccbb: pci/cardbus bridge implementing YENTA interface
+# pccard: pccard slots
+# cardbus: cardbus slots
+device		cbb
+device		pccard
+device		cardbus
+#device		pcic		ISA attachment currently busted
+#hint.pcic.0.at="isa"
+#hint.pcic.1.at="isa"
+
+#
 # SMB bus
 #
 # System Management Bus support is provided by the 'smbus' device.
@@ -2118,3 +2298,6 @@ options 	MAXFILES=999
 options 	METEOR_TEST_VIDEO
 options 	NDEVFSINO=1025
 options 	NDEVFSOVERFLOW=32769
+
+# Yet more undocumented options for linting.
+options 	VGA_DEBUG