Arrange for arm fork_trampoline() to return to userland via the standard

swi_exit code in exception.S instead of having its own inline expansion
of the DO_AST and PULLFRAME macros.  That means that now all references
to the PUSH/PULLFRAME and DO_AST macros are localized to exception.S,
so move the macros themselves into there and remove them from asmacros.h

1 files changed, 0 insertions, 208 deletions

diff --git a/sys/arm/include/asmacros.h b/sys/arm/include/asmacros.h
index b849582..469de50 100644
--- a/sys/arm/include/asmacros.h
+++ b/sys/arm/include/asmacros.h
@@ -47,190 +47,6 @@
 #ifdef LOCORE
 #include "opt_global.h"
 
-/*
- * ASM macros for pushing and pulling trapframes from the stack
- *
- * These macros are used to handle the irqframe and trapframe structures
- * defined above.
- */
-
-/*
- * PUSHFRAME - macro to push a trap frame on the stack in the current mode
- * Since the current mode is used, the SVC lr field is not defined.
- *
- * NOTE: r13 and r14 are stored separately as a work around for the
- * SA110 rev 2 STM^ bug
- */
-#ifdef ARM_TP_ADDRESS
-#define PUSHFRAME							   \
-	sub	sp, sp, #4;		/* Align the stack */		   \
-	str	lr, [sp, #-4]!;		/* Push the return address */	   \
-	sub	sp, sp, #(4*17);	/* Adjust the stack pointer */	   \
-	stmia	sp, {r0-r12};		/* Push the user mode registers */ \
-	add	r0, sp, #(4*13);	/* Adjust the stack pointer */	   \
-	stmia	r0, {r13-r14}^;		/* Push the user mode registers */ \
-        mov     r0, r0;                 /* NOP for previous instruction */ \
-	mrs	r0, spsr;		/* Put the SPSR on the stack */	   \
-	str	r0, [sp, #-4]!;						   \
-	ldr	r0, =ARM_RAS_START;					   \
-	mov	r1, #0;							   \
-	str	r1, [r0];						   \
-	mov	r1, #0xffffffff;					   \
-	str	r1, [r0, #4];
-#else
-#define PUSHFRAME							   \
-	sub	sp, sp, #4;		/* Align the stack */		   \
-	str	lr, [sp, #-4]!;		/* Push the return address */	   \
-	sub	sp, sp, #(4*17);	/* Adjust the stack pointer */	   \
-	stmia	sp, {r0-r12};		/* Push the user mode registers */ \
-	add	r0, sp, #(4*13);	/* Adjust the stack pointer */	   \
-	stmia	r0, {r13-r14}^;		/* Push the user mode registers */ \
-        mov     r0, r0;                 /* NOP for previous instruction */ \
-	mrs	r0, spsr;		/* Put the SPSR on the stack */	   \
-	str	r0, [sp, #-4]!;
-#endif
-
-/*
- * PULLFRAME - macro to pull a trap frame from the stack in the current mode
- * Since the current mode is used, the SVC lr field is ignored.
- */
-
-#ifdef ARM_TP_ADDRESS
-#define PULLFRAME							   \
-        ldr     r0, [sp], #0x0004;      /* Get the SPSR from stack */	   \
-        msr     spsr_fsxc, r0;						   \
-        ldmia   sp, {r0-r14}^;		/* Restore registers (usr mode) */ \
-        mov     r0, r0;                 /* NOP for previous instruction */ \
-	add	sp, sp, #(4*17);	/* Adjust the stack pointer */	   \
- 	ldr	lr, [sp], #0x0004;	/* Pull the return address */	   \
-	add	sp, sp, #4		/* Align the stack */
-#else 
-#define PULLFRAME							   \
-        ldr     r0, [sp], #0x0004;      /* Get the SPSR from stack */	   \
-        msr     spsr_fsxc, r0;						   \
-	clrex;								   \
-        ldmia   sp, {r0-r14}^;		/* Restore registers (usr mode) */ \
-        mov     r0, r0;                 /* NOP for previous instruction */ \
-	add	sp, sp, #(4*17);	/* Adjust the stack pointer */	   \
- 	ldr	lr, [sp], #0x0004;	/* Pull the return address */	   \
-	add	sp, sp, #4		/* Align the stack */
-#endif
-
-/*
- * PUSHFRAMEINSVC - macro to push a trap frame on the stack in SVC32 mode
- * This should only be used if the processor is not currently in SVC32
- * mode. The processor mode is switched to SVC mode and the trap frame is
- * stored. The SVC lr field is used to store the previous value of
- * lr in SVC mode.
- *
- * NOTE: r13 and r14 are stored separately as a work around for the
- * SA110 rev 2 STM^ bug
- */
-#ifdef ARM_TP_ADDRESS
-#define PUSHFRAMEINSVC							   \
-	stmdb	sp, {r0-r3};		/* Save 4 registers */		   \
-	mov	r0, lr;			/* Save xxx32 r14 */		   \
-	mov	r1, sp;			/* Save xxx32 sp */		   \
-	mrs	r3, spsr;		/* Save xxx32 spsr */		   \
-	mrs     r2, cpsr; 		/* Get the CPSR */		   \
-	bic     r2, r2, #(PSR_MODE);	/* Fix for SVC mode */		   \
-	orr     r2, r2, #(PSR_SVC32_MODE);				   \
-	msr     cpsr_c, r2;		/* Punch into SVC mode */	   \
-	mov	r2, sp;			/* Save	SVC sp */		   \
-	bic	sp, sp, #7;		/* Align sp to an 8-byte addrress */  \
-	sub	sp, sp, #4;		/* Pad trapframe to keep alignment */ \
-	str	r0, [sp, #-4]!;		/* Push return address */	   \
-	str	lr, [sp, #-4]!;		/* Push SVC lr */		   \
-	str	r2, [sp, #-4]!;		/* Push SVC sp */		   \
-	msr     spsr_fsxc, r3;		/* Restore correct spsr */	   \
-	ldmdb	r1, {r0-r3};		/* Restore 4 regs from xxx mode */ \
-	sub	sp, sp, #(4*15);	/* Adjust the stack pointer */	   \
-	stmia	sp, {r0-r12};		/* Push the user mode registers */ \
-	add	r0, sp, #(4*13);	/* Adjust the stack pointer */	   \
-	stmia	r0, {r13-r14}^;		/* Push the user mode registers */ \
-        mov     r0, r0;                 /* NOP for previous instruction */ \
-	ldr	r5, =ARM_RAS_START;	/* Check if there's any RAS */	   \
-	ldr     r4, [r5, #4];           /* reset it to point at the     */ \
-	cmp     r4, #0xffffffff;        /* end of memory if necessary;  */ \
-	movne   r1, #0xffffffff;        /* leave value in r4 for later  */ \
-	strne   r1, [r5, #4];           /* comparision against PC.      */ \
-	ldr     r3, [r5];               /* Retrieve global RAS_START    */ \
-	cmp     r3, #0;                 /* and reset it if non-zero.    */ \
-	movne   r1, #0;                 /* If non-zero RAS_START and    */ \
-	strne   r1, [r5];               /* PC was lower than RAS_END,   */ \
-	ldrne   r1, [r0, #16];          /* adjust the saved PC so that  */ \
-	cmpne   r4, r1;                 /* execution later resumes at   */ \
-	strhi   r3, [r0, #16];          /* the RAS_START location.      */ \
-	mrs     r0, spsr;                                              \
-	str     r0, [sp, #-4]!
-#else
-#define PUSHFRAMEINSVC							   \
-	stmdb	sp, {r0-r3};		/* Save 4 registers */		   \
-	mov	r0, lr;			/* Save xxx32 r14 */		   \
-	mov	r1, sp;			/* Save xxx32 sp */		   \
-	mrs	r3, spsr;		/* Save xxx32 spsr */		   \
-	mrs     r2, cpsr;		/* Get the CPSR */		   \
-	bic     r2, r2, #(PSR_MODE);	/* Fix for SVC mode */		   \
-	orr     r2, r2, #(PSR_SVC32_MODE);				   \
-	msr     cpsr_c, r2;		/* Punch into SVC mode */	   \
-	mov	r2, sp;			/* Save	SVC sp */		   \
-	bic	sp, sp, #7;		/* Align sp to an 8-byte addrress */  \
-	sub	sp, sp, #4;		/* Pad trapframe to keep alignment */ \
-	str	r0, [sp, #-4]!;		/* Push return address */	   \
-	str	lr, [sp, #-4]!;		/* Push SVC lr */		   \
-	str	r2, [sp, #-4]!;		/* Push SVC sp */		   \
-	msr     spsr_fsxc, r3;		/* Restore correct spsr */	   \
-	ldmdb	r1, {r0-r3};		/* Restore 4 regs from xxx mode */ \
-	sub	sp, sp, #(4*15);	/* Adjust the stack pointer */	   \
-	stmia	sp, {r0-r12};		/* Push the user mode registers */ \
-	add	r0, sp, #(4*13);	/* Adjust the stack pointer */	   \
-	stmia	r0, {r13-r14}^;		/* Push the user mode registers */ \
-        mov     r0, r0;                 /* NOP for previous instruction */ \
-	mrs	r0, spsr;		/* Put the SPSR on the stack */	   \
-	str	r0, [sp, #-4]!
-#endif
-
-/*
- * PULLFRAMEFROMSVCANDEXIT - macro to pull a trap frame from the stack
- * in SVC32 mode and restore the saved processor mode and PC.
- * This should be used when the SVC lr register needs to be restored on
- * exit.
- */
-
-#ifdef ARM_TP_ADDRESS
-#define PULLFRAMEFROMSVCANDEXIT						   \
-        ldr     r0, [sp], #0x0004;	/* Get the SPSR from stack */	   \
-        msr     spsr_fsxc, r0;		/* restore SPSR */		   \
-        ldmia   sp, {r0-r14}^;		/* Restore registers (usr mode) */ \
-        mov     r0, r0;	  		/* NOP for previous instruction */ \
-	add	sp, sp, #(4*15);	/* Adjust the stack pointer */	   \
-	ldmia	sp, {sp, lr, pc}^	/* Restore lr and exit */
-#else 
-#define PULLFRAMEFROMSVCANDEXIT						   \
-        ldr     r0, [sp], #0x0004;	/* Get the SPSR from stack */	   \
-        msr     spsr_fsxc, r0;		/* restore SPSR */		   \
-	clrex;								   \
-        ldmia   sp, {r0-r14}^;		/* Restore registers (usr mode) */ \
-        mov     r0, r0;	  		/* NOP for previous instruction */ \
-	add	sp, sp, #(4*15);	/* Adjust the stack pointer */	   \
-	ldmia	sp, {sp, lr, pc}^	/* Restore lr and exit */
-#endif
-#if defined(__ARM_EABI__)
-/*
- * Unwind hints so we can unwind past functions that use
- * PULLFRAMEFROMSVCANDEXIT. They are run in reverse order.
- * As the last thing we do is restore the stack pointer
- * we can ignore the padding at the end of struct trapframe.
- */
-#define	UNWINDSVCFRAME							   \
-	.save {r13-r15};		/* Restore sp, lr, pc */	   \
-	.pad #(2*4);			/* Skip user sp and lr */	   \
-	.save {r0-r12};			/* Restore r0-r12 */		   \
-	.pad #(4)			/* Skip spsr */
-#else
-#define	UNWINDSVCFRAME
-#endif
-
 #define	DATA(name) \
 	.data ; \
 	_ALIGN_DATA ; \
@@ -239,38 +55,14 @@
 name:
 
 #ifdef _ARM_ARCH_6
-#define	AST_LOCALS
 #define GET_CURTHREAD_PTR(tmp) \
     	mrc	p15, 0, tmp, c13, c0, 4
 #else
-#define	AST_LOCALS
 #define GET_CURTHREAD_PTR(tmp)	\
 	ldr	tmp, =_C_LABEL(__pcpu);\
 	ldr	tmp, [tmp, #PC_CURTHREAD]
 #endif
 
-#define	DO_AST								\
-	ldr	r0, [sp]		/* Get the SPSR from stack */	;\
-	mrs	r4, cpsr		/* save CPSR */			;\
-	orr	r1, r4, #(I32_bit|F32_bit)				;\
-	msr	cpsr_c, r1		/* Disable interrupts */	;\
-	and	r0, r0, #(PSR_MODE)	/* Returning to USR mode? */	;\
-	teq	r0, #(PSR_USR32_MODE)					;\
-	bne	2f			/* Nope, get out now */		;\
-	bic	r4, r4, #(I32_bit|F32_bit)				;\
-1:	GET_CURTHREAD_PTR(r5)						;\
-	ldr	r1, [r5, #(TD_FLAGS)]					;\
-	and	r1, r1, #(TDF_ASTPENDING|TDF_NEEDRESCHED)		;\
-	teq	r1, #0x00000000						;\
-	beq	2f			/* Nope. Just bail */		;\
-	msr	cpsr_c, r4		/* Restore interrupts */	;\
-	mov	r0, sp							;\
-	bl	_C_LABEL(ast)		/* ast(frame) */		;\
-	orr	r0, r4, #(I32_bit|F32_bit)				;\
-	msr	cpsr_c, r0						;\
-	b	1b							;\
-2:
-
 #endif /* LOCORE */
 
 #endif /* _KERNEL */