Remove A10 kernel config file, this should have been done in rr308273

1 files changed, 0 insertions, 110 deletions

diff --git a/sys/arm/conf/A10 b/sys/arm/conf/A10
deleted file mode 100644
index 1f8b470..0000000
--- a/sys/arm/conf/A10
+++ /dev/null
@@ -1,110 +0,0 @@
-#
-# A10 -- Custom configuration for the AllWinner A10 SoC
-#
-# For more information on this file, please read the config(5) manual page,
-# and/or the handbook section on Kernel Configuration Files:
-#
-#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
-#
-# The handbook is also available locally in /usr/share/doc/handbook
-# if you've installed the doc distribution, otherwise always see the
-# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
-# latest information.
-#
-# An exhaustive list of options and more detailed explanations of the
-# device lines is also present in the ../../conf/NOTES and NOTES files.
-# If you are in doubt as to the purpose or necessity of a line, check first
-# in NOTES.
-#
-# $FreeBSD$
-
-ident		A10
-
-include 	"std.armv6"
-include 	"../allwinner/std.a10"
-
-options 	INTRNG
-
-options 	SOC_ALLWINNER_A10
-options 	SOC_ALLWINNER_A13
-
-options 	HZ=100
-options 	SCHED_4BSD		# 4BSD scheduler
-options 	PLATFORM
-options 	MULTIDELAY
-
-# NFS root from boopt/dhcp
-#options 	BOOTP
-#options 	BOOTP_NFSROOT
-#options 	BOOTP_COMPAT
-#options 	BOOTP_NFSV3
-#options 	BOOTP_WIRED_TO=emac0
-
-# EXT_RESOURCES pseudo devices
-options		EXT_RESOURCES
-device		clk
-device		phy
-device		hwreset
-device		regulator
-
-# MMC/SD/SDIO Card slot support
-device		mmc			# mmc/sd bus
-device		mmcsd			# mmc/sd flash cards
-
-# ATA controllers
-device		ahci			# AHCI-compatible SATA controllers
-#device		ata			# Legacy ATA/SATA controllers
-
-# Console and misc
-device		uart
-device		uart_snps
-device		pty
-device		snp
-device		md
-device		random			# Entropy device
-
-# I2C support
-device		iicbus
-device		iic
-device		twsi
-device		axp209			# AXP209 Power Management Unit
-
-device		pcf8563			# RTC
-
-# GPIO
-device		gpio
-device		gpioled
-
-device		scbus			# SCSI bus (required for ATA/SCSI)
-device		da			# Direct Access (disks)
-device		pass			# Passthrough device (direct ATA/SCSI access)
-
-# USB support
-options 	USB_HOST_ALIGN=64	# Align usb buffers to cache line size.
-device		usb
-#device		uhci
-device		ohci
-device		ehci
-
-device		umass
-
-# Ethernet
-device		loop
-device		ether
-device		mii
-device		bpf
-
-device		emac
-
-# USB ethernet support, requires miibus
-device		miibus
-
-# Sound support
-device		sound
-
-# Pinmux
-device		fdt_pinctrl
-
-# Flattened Device Tree
-options 	FDT			# Configure using FDT/DTB data
-makeoptions	MODULES_EXTRA=dtb/allwinner