MFH: r280643-r281852

Sponsored by:	The FreeBSD Foundation

1 files changed, 133 insertions, 0 deletions

diff --git a/sys/arm/conf/ODROIDC1 b/sys/arm/conf/ODROIDC1
new file mode 100644
index 0000000..7d70fa4
--- /dev/null
+++ b/sys/arm/conf/ODROIDC1
@@ -0,0 +1,133 @@
+# ODROIDC1 -- Custom configuration for the HardKernel ODROID-C1 SBC
+#
+# For more information on this file, please read the handbook section on
+# Kernel Configuration Files:
+#
+#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
+# in NOTES.
+#
+# $FreeBSD$
+
+ident		ODROIDC1
+
+include		"../amlogic/aml8726/std.odroidc1"
+
+options		HZ=100
+options		SCHED_ULE		# ULE scheduler
+options		PREEMPTION		# Enable kernel thread preemption
+options		INET			# InterNETworking
+options		INET6			# IPv6 communications protocols
+options		FFS			# Berkeley Fast Filesystem
+options		SOFTUPDATES		# Enable FFS soft updates support
+options		UFS_ACL			# Support for access control lists
+options		UFS_DIRHASH		# Improve performance on big directories
+options		PROCFS			# Process filesystem (requires PSEUDOFS)
+options		PSEUDOFS		# Pseudo-filesystem framework
+options		GEOM_PART_BSD		# BSD partition scheme
+options		GEOM_PART_MBR		# MBR partition scheme
+options		SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
+options		KTRACE			# ktrace(1) support
+options		SYSVSHM			# SYSV-style shared memory
+options		SYSVMSG			# SYSV-style message queues
+options		SYSVSEM			# SYSV-style semaphores
+options		_KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
+options		PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
+options		KBD_INSTALL_CDEV	# install a CDEV entry in /dev
+options		LINUX_BOOT_ABI
+options		VFP			# vfp/neon
+
+# Debugging
+makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
+options		ALT_BREAK_TO_DEBUGGER
+#options 	VERBOSE_SYSINIT		# Enable verbose sysinit messages
+options		BOOTVERBOSE=1
+options		KDB
+options		DDB			# Enable the kernel debugger
+options		INVARIANTS		# Enable calls of extra sanity checking
+options		INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
+options		WITNESS			# Enable checks to detect deadlocks and cycles
+options		WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed
+#options 	DIAGNOSTIC
+
+# NFS support
+#options 	NFSCL			# New Network Filesystem Client
+#options 	NFSLOCKD		# Network Lock Manager
+#options 	NFS_ROOT		# NFS usable as /, requires NFSCL
+
+# NFS root from boopt/dhcp
+#options 	BOOTP
+#options 	BOOTP_NFSROOT
+#options 	BOOTP_COMPAT
+#options 	BOOTP_NFSV3
+#options 	BOOTP_WIRED_TO=axe0
+
+# MMC/SD/SDIO card slot support
+device		mmc			# mmc/sd bus
+device		mmcsd			# mmc/sd flash cards
+
+# Boot device is 2nd slice on MMC/SD card
+options		ROOTDEVNAME=\"ufs:mmcsd0s2\"
+
+# GPIO
+device		gpio
+device		gpioled
+
+# I2C support
+device		iicbus
+device		iicbb
+device		iic
+
+# vt is the default console driver, resembling an SCO console
+device		vt
+#device		kbdmux
+
+# Serial (COM) ports
+device		uart			# Generic UART driver
+
+# Pseudo devices.
+device		loop			# Network loopback
+device		random			# Entropy device
+device		ether			# Ethernet support
+device		pty			# BSD-style compatibility pseudo ttys
+
+# The `bpf' device enables the Berkeley Packet Filter.
+# Be aware of the administrative consequences of enabling this!
+# Note that 'bpf' is required for DHCP.
+device		bpf			# Berkeley packet filter
+
+# USB support
+device		usb			# General USB code (mandatory for USB)
+device		dwcotg			# DWC OTG controller
+options		USB_HOST_ALIGN=64	# Cacheline size is 64
+options		USB_DEBUG
+#options 	USB_REQ_DEBUG
+#options 	USB_VERBOSE
+
+#device		ukbd			# USB keyboard
+#device		ums			# USB mouse
+
+device		scbus			# SCSI bus (required for ATA/SCSI)
+device		da			# Direct Access (disks)
+device		umass			# Disks/Mass storage - Requires scbus and da
+
+# Ethernet support
+device		miibus			# MII bus support
+
+# SoC Ethernet, requires miibus
+device		dwc
+
+# USB Ethernet, requires miibus
+device		axe			# ASIX Electronics USB Ethernet
+
+# Flattened Device Tree
+options		FDT
+options		FDT_DTB_STATIC