Complete the transition away from newbus to populate the children to

the linker set of CPU modules.  The newbus method, although clever,
had many flaws: it didn't really support multiple SoC, many of the
comments about order were just wrong, and it did a few things far too
late to be useful.  delay and cpu_reset now work much earlier in the
boot process.

1 files changed, 9 insertions, 58 deletions

diff --git a/sys/arm/at91/at91rm9200.c b/sys/arm/at91/at91rm9200.c
index 00b503b..a3201e3 100644
--- a/sys/arm/at91/at91rm9200.c
+++ b/sys/arm/at91/at91rm9200.c
@@ -46,14 +46,6 @@ __FBSDID("$FreeBSD$");
 #include <arm/at91/at91_pmcvar.h>
 #include <arm/at91/at91soc.h>
 
-
-struct at91rm92_softc {
-	device_t dev;
-	bus_space_tag_t sc_st;
-	bus_space_handle_t sc_sh;
-	bus_space_handle_t sc_sys_sh;
-	bus_space_handle_t sc_aic_sh;
-};
 /*
  * Standard priority levels for the system.  0 is lowest and 7 is highest.
  * These values are the ones Atmel uses for its Linux port, which differ
@@ -147,42 +139,19 @@ at91_pll_outb(int freq)
 		return (0x8000);
 }
 
-static void
-at91_identify(driver_t *drv, device_t parent)
-{
-
-	if (at91_cpu_is(AT91_T_RM9200))
-		at91_add_child(parent, 0, "at91rm920", 0, 0, 0, -1, 0, 0);
-}
-
-static int
-at91_probe(device_t dev)
-{
-
-	device_set_desc(dev, soc_info.name);
-	return (0);
-}
-
-static int
-at91_attach(device_t dev)
-{
-	struct at91_pmc_clock *clk;
-	struct at91rm92_softc *sc = device_get_softc(dev);
-	struct at91_softc *at91sc = device_get_softc(device_get_parent(dev));
-
-	sc->sc_st = at91sc->sc_st;
-	sc->sc_sh = at91sc->sc_sh;
-	sc->dev = dev;
-
-	if (bus_space_subregion(sc->sc_st, sc->sc_sh, AT91RM92_SYS_BASE,
-	    AT91RM92_SYS_SIZE, &sc->sc_sys_sh) != 0)
-		panic("Enable to map system registers");
-
+#if 0
+/* -- XXX are these needed? */
 	/* Disable all interrupts for RTC (0xe24 == RTC_IDR) */
 	bus_space_write_4(sc->sc_st, sc->sc_sys_sh, 0xe24, 0xffffffff);
 
 	/* Disable all interrupts for the SDRAM controller */
 	bus_space_write_4(sc->sc_st, sc->sc_sys_sh, 0xfa8, 0xffffffff);
+#endif
+
+static void
+at91_clock_init(void)
+{
+	struct at91_pmc_clock *clk;
 
 	/* Update USB device port clock info */
 	clk = at91_pmc_clock_ref("udpck");
@@ -218,30 +187,12 @@ at91_attach(device_t dev)
 	clk->pll_div_mask  = RM9200_PLL_B_DIV_MASK;
 	clk->set_outb      = at91_pll_outb;
 	at91_pmc_clock_deref(clk);
-
-	return (0);
 }
 
-static device_method_t at91_methods[] = {
-	DEVMETHOD(device_probe, at91_probe),
-	DEVMETHOD(device_attach, at91_attach),
-	DEVMETHOD(device_identify, at91_identify),
-	{0, 0},
-};
-
-static driver_t at91rm92_driver = {
-	"at91rm920",
-	at91_methods,
-	sizeof(struct at91rm92_softc),
-};
-
-static devclass_t at91rm92_devclass;
-
-DRIVER_MODULE(at91rm920, atmelarm, at91rm92_driver, at91rm92_devclass, 0, 0);
-
 static struct at91_soc_data soc_data = {
 	.soc_delay = at91_st_delay,
 	.soc_reset = at91_st_cpu_reset,
+	.soc_clock_init = at91_clock_init,
 	.soc_irq_prio = at91_irq_prio,
 	.soc_children = at91_devs,
 };