summaryrefslogtreecommitdiffstats
path: root/share
diff options
context:
space:
mode:
authorsam <sam@FreeBSD.org>2006-12-04 22:41:41 +0000
committersam <sam@FreeBSD.org>2006-12-04 22:41:41 +0000
commitb93a731abf8f76dfd3a9d905ead708924621430b (patch)
tree1e12277db2c73c0684e04f6966719791fb8e3854 /share
parent7d0068dacdbbbe473e388eba9e0c24a2ce548769 (diff)
downloadFreeBSD-src-b93a731abf8f76dfd3a9d905ead708924621430b.zip
FreeBSD-src-b93a731abf8f76dfd3a9d905ead708924621430b.tar.gz
start 'o man page for xscale npe ethernet driver
MFC after: 1 month
Diffstat (limited to 'share')
-rw-r--r--share/man/man4/npe.4160
1 files changed, 160 insertions, 0 deletions
diff --git a/share/man/man4/npe.4 b/share/man/man4/npe.4
new file mode 100644
index 0000000..0440a0d
--- /dev/null
+++ b/share/man/man4/npe.4
@@ -0,0 +1,160 @@
+.\"
+.\" Copyright (c) 2006 Sam Leffler, Errno Consulting
+.\"
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" $FreeBSD$
+.\"
+.Dd December 4, 2006
+.Dt NPE 4
+.Os
+.Sh NAME
+.Nm npe
+.Nd "Intel XScale Network Processing Engine (NPE) Ethernet device driver"
+.Sh SYNOPSIS
+To compile this driver into the kernel,
+place the following lines in your
+kernel configuration file:
+.Bd -ragged -offset indent
+.Cd "device npe"
+.Cd "device npe_fw"
+.Cd "device firmware"
+.Cd "device qmgr"
+.Cd "device miibus"
+.Ed
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for Ethernet adapters based on the Intel
+XScale Network Processing Engine (NPE).
+The NPE must be loaded with firmware that is typically distributed
+with boards that have this part.
+Otherwise the firmware may be obtained at no cost from the Intel web site.
+.Pp
+The
+.Nm
+driver supports the following media types:
+.Pp
+.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
+.It autoselect
+Enable autoselection of the media type and options
+.It 10baseT/UTP
+Set 10Mbps operation
+.It 100baseTX
+Set 100Mbps (Fast Ethernet) operation
+.El
+.Pp
+The
+.Nm
+driver supports the following media options:
+.Pp
+.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
+.It full-duplex
+Set full duplex operation
+.El
+.Pp
+The
+.Nm
+driver supports polled operation when the system is
+configured with device polling support,
+.Xr polling 4 .
+Note that for multi-port configurations polling and interrupt-style
+operation should not be combined as one of the hardware queues
+is shared by all ports.
+.Pp
+For further information on configuring this device, see
+.Xr ifconfig 8 .
+.\".Pp
+.\"The
+.\".Nm
+.\"driver supports reception and transmission of extended frames
+.\"for
+.\".Xr vlan 4 .
+.\"This capability of
+.\".Nm
+.\"can be controlled by means of the
+.\".Cm vlanmtu
+.\"parameter
+.\"to
+.\".Xr ifconfig 8 .
+.Sh HARDWARE
+.Nm
+adapters exist only on boards that have an XScale processor.
+.Sh DIAGNOSTICS
+.Bl -diag
+.It "npe%d: unit %d not supported"
+The unit is larger than the maximum number built into the driver.
+This should not happen as
+.Nm
+devices are not really probed for; they are statically enumerated.
+.It "npe%d: Cannot find my PHY."
+The associated PHY didn't appear while probing the MII bus.
+The relationship between PHY's and NPE's is statically defined
+in the driver and may require alteratoins to the driver for new boards.
+.It "npe%d: unable to allocate memory for %s ... buffers"
+There is not enough memory available for allocation.
+The driver pre-allocated memory during attach so this should not happen.
+.It "npe%d: remember to fix rx q setup"
+See BUGS below.
+.It "npe%d: free mbuf at entry %u"
+An mbuf was unexpectedly found on the device queue; the index of
+the queue entry is printed.
+.It "npe%d: too many fragments %u"
+A frame was dropped on transmit because it was too fragmented and
+the logic to de-fragment failed.
+This should not happen.
+.It "npe%d: device timeout"
+The device has stopped responding to the network, or there is a problem with
+the network connection (cable).
+.El
+.Pp
+Other diagnostics exist and are not listed here;
+they should be self-explanatory.
+.Sh SEE ALSO
+.Xr arp 4 ,
+.Xr miibus 4 ,
+.Xr netintro 4 ,
+.Xr polling 4 ,
+.Xr qmgr 4 ,
+.\".Xr vlan 4 ,
+.Xr ifconfig 8
+.Sh HISTORY
+The
+.Nm
+device driver first appeared in
+.Fx 6.3 .
+.SH CAVEATS
+This driver has been tested only with dual-port boards using the IXP425
+such as the Gateworks Avila 2348.
+Some changes to the driver may be required for other configurations.
+.SH BUGS
+The hardware queues are not properly flushed when the interface
+is marked down.
+.Pp
+The assignment of receive traffic classes to hardware queues
+is presently incomplete.
+Only the first 4 classes are assigned while there are 8 total.
+The driver will print "remember to fix rx q setup" on startup as a
+reminder.
+For the moment it is not a problem as all traffic arrives classified
+with class 0.
OpenPOWER on IntegriCloud