Added manual page for DEC DEFPA and DEFEA FDDI adapters.

Submitted by:	Matt Thomas

2 files changed, 58 insertions, 1 deletions

diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile
index b07c74c..b0affab 100644
--- a/share/man/man4/Makefile
+++ b/share/man/man4/Makefile
@@ -1,12 +1,13 @@
 #	@(#)Makefile	8.1 (Berkeley) 6/18/93
 
-MAN4=	bpf.4 cd.4 ch.4 clnp.4 cltp.4 ddb.4 drum.4 esis.4 fd.4 icmp.4 \
+MAN4=	bpf.4 cd.4 ch.4 clnp.4 cltp.4 ddb.4 drum.4 esis.4 fd.4 fpa.4 icmp.4 \
 	idp.4 inet.4 ip.4 ipfirewall.4 iso.4 lkm.4 lo.4 netintro.4 ns.4 \
 	nsip.4 null.4 pty.4 route.4 scsi.4 sd.4 snp.4 spp.4 st.4 su.4 tcp.4 \
 	ttcp.4 termios.4 tp.4 tty.4 udp.4 uk.4 unix.4 yp.4
 MLINKS+=fd.4 stderr.4 fd.4 stdin.4 fd.4 stdout.4
 MLINKS+=netintro.4 networking.4
 MLINKS+=ipfirewall.4 ipacct.4 ipfirewall.4 ipfw.4 ipfirewall.4 ipaccounting.4
+MLINKS+=fpa.4 fea.4
 # XXX NOT IMPORTED:	man4.hp300 man4.sparc man4.tahoe man4.vax
 SUBDIR=	man4.i386
 
diff --git a/share/man/man4/fpa.4 b/share/man/man4/fpa.4
new file mode 100644
index 0000000..cd9de0e
--- /dev/null
+++ b/share/man/man4/fpa.4
@@ -0,0 +1,56 @@
+.\"
+.\"
+.\" Copyright (c) 1995, Matt Thomas
+.\" All rights reserved.
+.\"
+.Dd March 13, 1995
+.Dt FPA 4 i386
+.Dt FEA 4 i386
+.Os
+.Sh NAME
+.Nm fpa , 
+.Nm fea
+.Nd
+Device Drivers for DEC FDDI Controllers
+.Sh SYNOPSIS
+.Cd "device fpa0"
+.Cd "device fea0 at isa? net irq ? vector feaintr"
+.Pp
+FreeBSD only:
+.Cd "pseudo-device fddi"
+.Sh DESCRIPTION
+The
+.Nm fpa
+and
+.Nm fea
+device driver provides support for the DEC DEFPA PCI FDDI Controller and
+the DEC DEFEA EISA FDDI Controller, respectively.  All variants of either
+controller are supported including the DAS and SAS configurations.
+.Pp
+.Sh DIAGNOSTICS
+.Bl -diag
+.It "fea%d: error: desired IRQ of %d does not match device's actual IRQ (%d)"
+The device probe detected that the DEFEA board is configured for a different 
+interrupt than the one specified in the kernel configuration file.
+.It "fea%d: error: memory not enabled! ECU reconfiguration required"
+The device probe found that no device memory had been configured on the
+DEFEA.  Also the DEFEA can be configured with no device memory, this driver
+requires a mininum of 1K device memory be setup.  The ECU (EISA Configuration
+Utility) will need to be run to change the settings.
+.El
+.Sh CAVEATS
+Normally, the device driver will not enable the reception of SMT frames.
+However if the IFF_LINK1 flag is set, the device driver will enable the
+reception of SMT frames and pass them up to the Berkeley Packet Filter for 
+processing.
+.Pp
+.Sh SEE ALSO
+.Xr arp 4 ,
+.Xr ifconfig 8 ,
+.Xr netintro 4
+.Sh AUTHOR
+The
+.Nm fpa
+and
+.Nm fea
+device driver and manual page was written by Matt Thomas.