The man page for the new IDT77252 driver.

2 files changed, 164 insertions, 0 deletions

diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile
index dd153a3..8099c6d 100644
--- a/share/man/man4/Makefile
+++ b/share/man/man4/Makefile
@@ -174,6 +174,7 @@ MAN=	aac.4 \
 	oldcard.4 \
 	orm.4 \
 	pass.4 \
+	patm.4 \
 	pci.4 \
 	pccard.4 \
 	pccbb.4 \
@@ -318,6 +319,7 @@ MLINKS+=mem.4 kmem.4
 MLINKS+=netintro.4 networking.4
 MLINKS+=nge.4 if_nge.4
 MLINKS+=oldcard.4 card.4
+MLINKS+=patm.4 if_patm.4
 MLINKS+=pccbb.4 cbb.4
 MLINKS+=pcm.4 snd.4
 MLINKS+=pcn.4 if_pcn.4
diff --git a/share/man/man4/patm.4 b/share/man/man4/patm.4
new file mode 100644
index 0000000..0094f59
--- /dev/null
+++ b/share/man/man4/patm.4
@@ -0,0 +1,162 @@
+.\"
+.\" Copyright (c) 2003
+.\"	Fraunhofer Institute for Open Communication Systems (FhG Fokus).
+.\" 	All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\" Author: Hartmut Brandt <harti@freebsd.org>
+.\"
+.\" $FreeBSD$
+.\"
+.\" patm(4) man page
+.\"
+.Dd July 15, 2003
+.Dt PATM 4
+.Os FreeBSD
+.Sh NAME
+.Nm patm
+.Nd Device driver for IDT77252 based ATM interfaces (ProSum and IDT)
+.Sh SYNOPSIS
+.Cd device patm
+.Cd device utopia
+.Cd device atm
+.Cd options NATM
+.Cd options LIBMBPOOL
+.Sh DESCRIPTION
+The
+.Nm
+device driver supports ATM cards based on the IDT77252 chip. It has been
+tested with ProSum's ProATM-155 cards and with IDT's evaluation boards.
+The driver interfaces with the
+.Xr natm 4
+framework,
+.Xr netgraph 4
+and HARP.
+It provides only PVC services. Signalling, ATMARP, ILMI and other
+higher layer protocols are implemented using
+.Xr netgraph 4
+or HARP.
+.Pp
+For configuring the card for IP see
+.Xr natmip 4 .
+.Pp
+The driver supports UBR, CBR, VBR and ABR traffic. Supported AALs are:
+AAL0 (cell payloads), AAL5 and raw AAL. The driver supports opening
+of VCI/VPI 0/0 in RX, raw AAL-mode. This VC will receive all incoming cells (even
+those with non-zero GFC fields and VPI/VCI values outside the allowed range)
+that are not claimed by other open connections. This may be used
+for monitoring purposes.
+.Pp
+The following sysctls are recognized by the driver additionally to those
+handled by
+.Xr utopia 4 :
+.Bl -tag -width XXX
+.It Cm hw.atm.patmN.istats
+Returns a list of
+.Dv uint32_t
+statistic counters with internal driver statistics.
+.It Cm hw.atm.patmN.eeprom
+This is a read-only variable containing the contents of the on-board EEPROM
+device.
+.It Cm hw.atm.patmN.lbuf_max
+This puts an upper limit on the number of large receive buffers the
+driver will allocate. This is a read-only variable that can be set
+via a loader tunable.
+.It Cm hw.atm.patmN.tx_maxmaps
+This is the upper limit of transmission DMA maps the driver will allocate.
+This is read-only but may be set via a loader tunable.
+.It Cm hw.atm.patmN.debug
+.Em (only if debugging enabled)
+These are debugging flags. See
+.Fn if_patmvar.h
+for the possible flags. This may be initialized via a loader tunable.
+.It Cm hw.atm.patmN.regs
+.Em (only if debugging enabled)
+Returns the current values of the card's registers.
+.It Cm hw.atm.patmN.tsq
+Returns the transmit status queue.
+.El
+.Pp
+When loaded the driver initializes several variables from loader tunables:
+.Bl -tag -width XXX
+.It Cm hw.patmN.lbuf_max
+This initializes the corresponding sysctl variable and defines an upper
+limit on the number of large receive buffers (mbuf clusters).
+.It Cm hw.patmN.tx_maxmaps
+This initializes the corresponding sysctl variable and is the maximum
+number of DMA maps for transmission that the driver will allocated.
+.It Cm hw.patmN.debug
+.Em (only if debugging enabled)
+Initializes the debugging flags.
+.El
+.Pp
+The driver supports the media options
+.Ar sdh ,
+.Ar noscramb
+and
+.Ar unassigned
+(see
+.Xr utopia 4 )
+when the card is a 155MBit card. Both PMC-Sierra S/UNI and IDT77155 PHY
+chips are supported for these cards. For 25MBit cards the IDT77105 is
+supported.
+.Sh DIAGNOSTICS
+.Bd -literal
+patm1: <NICStAR (77222/77252) ATM adapter> port 0xc000-0xc0ff mem 0xf8000000-0xf83fffff,0xf4000000-0xf4000fff irq 11 at device 8.0 on pci2
+patm1: IDT77252 155MBit interface; idt77252 Rev. G; IDT77155 PHY
+patm1: 128K x 32 SRAM; 4096 connections
+.Ed
+.Sh SEE ALSO
+.Xr natm 4 ,
+.Xr natmip 4 ,
+.Xr utopia 4
+.Sh CAVEATS
+The card fails to generate an interrupt if a cell is received in AAL0 mode
+that has the MSB of the PTI field cleared. Therefor cells will delivered
+on the next receive interrupt which can happen either when the receive
+status queue is full, or a cell with the last bit of the PTI set is received.
+.Pp
+Although the card supports AAL3/4 the driver does not.
+.Pp
+The rate tables used by this driver are not the tables recommended by IDT
+(they are wrong anyway). The driver's tables are slightly more aggressive
+than IDT's. That means, that the actual cell rate can be slightly higher
+than the specified. This is in contrast to the IDT tables where cell rates
+5% lesser than the allowed one have been observed. This can be changed
+by changing the program that generates these tables (/sys/dev/patm/genrtab)
+and regenerating the tables.
+.Pp
+The reported media for the 155MBit cards will always be OC3/MM, because
+there is no (known to me) way to figure out the actual medium. The medium
+should really be coded in the EEPROM by the manufacturer.
+.Pp
+The Tx cell counter in the utopia statistics is wrong, because the chip
+uses idle cells for spacing and the PHY counts these cells. While
+there is a configuration option for the chip to switch of these cells
+and, according to the documentation, this should not influence cell spacing,
+it does, so the driver let's the chip generate idle cells.
+.Sh ACKNOWLEDGEMENTS
+Thanks to Christian Bucari from ProSum for lending two of these cards to enable
+the development of this driver. Thanks also for answering my questions.
+.Sh AUTHORS
+.An Harti Brandt Aq harti@freebsd.org .