Fix typos, spelling, formatting and mdoc mistakes found by Nobuyuki while

translating these manual pages.  Minor corrections by me.

Submitted by:	Nobuyuki Koganemaru <n-kogane@syd.odn.ne.jp>

1 files changed, 5 insertions, 5 deletions

diff --git a/share/man/man4/net80211.4 b/share/man/man4/net80211.4
index 6227b88..693f6b9 100644
--- a/share/man/man4/net80211.4
+++ b/share/man/man4/net80211.4
@@ -230,7 +230,7 @@ Return the MAC address for the current BSS identifier via
 .Va i_data .
 When the interface is running, the bssid is either the value
 configured locally (e.g. for an IBSS network started by the local station)
-or the value adopted when joing an existing network.
+or the value adopted when joining an existing network.
 For WDS interfaces this value is the address of the remote station.
 When the interface is not running, the bssid returned is the desired
 bssid, if any, that has been configured.
@@ -485,12 +485,12 @@ and
 .It Dv IEEE80211_IOC_PUREG
 Return whether ``pure 11g'' mode is enabled in
 .Va i_val .
-This setting is meaningful only for acces point operation;
+This setting is meaningful only for access point operation;
 when non-zero, 802.11b stations will not be allowed to associate.
 .It Dv IEEE80211_IOC_PUREN
 Return whether ``pure 11n'' mode is enabled in
 .Va i_val .
-This setting is meaningful only for acces point operation;
+This setting is meaningful only for access point operation;
 when non-zero, legacy (non-11n capable) stations will not be
 allowed to associate.
 .It Dv IEEE80211_IOC_REGDOMAIN
@@ -595,7 +595,7 @@ Return whether Atheros Dynamic Turbo mode is enabled in
 Dynamic Turbo mode is a non-standard protocol extension available only
 on Atheros devices where channel width is dynamically
 changed between 20MHz and 40MHz.
-Note tht enabling Dynamic Turbo mode support does not guarantee use;
+Note that enabling Dynamic Turbo mode support does not guarantee use;
 both client and access point must use Atheros devices and support must
 be enabled on both sides.
 .It Dv IEEE80211_IOC_TXPARAMS
@@ -654,7 +654,7 @@ together with an optional IEEE80211_WMEPARAM_BSS flag to indicate if the
 parameter for the BSS or the channel is desired.
 If WME is not supported then
 .Er EINVAL
-wil be returned.
+will be returned.
 .It Dv IEEE80211_IOC_WME_CWMAX
 Return the WME CWmax setting (log2) for the specified Access Class (AC) in
 .Va i_val .