Deactivate manpages repo-copied to man4 directory (all these drivers

not i386 specific anymore -- move them to appropriate place)

1 files changed, 0 insertions, 127 deletions

diff --git a/share/man/man4/man4.i386/tl.4 b/share/man/man4/man4.i386/tl.4
deleted file mode 100644
index 3591a6d..0000000
--- a/share/man/man4/man4.i386/tl.4
+++ /dev/null
@@ -1,127 +0,0 @@
-.\" Copyright (c) 1997, 1998
-.\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by Bill Paul.
-.\" 4. Neither the name of the author nor the names of any co-contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"   without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
-.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-.\" THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $FreeBSD$
-.\"
-.Dd May 1, 1998
-.Dt TL 4 i386
-.Os FreeBSD
-.Sh NAME
-.Nm tl
-.Nd
-Texas Instruments ThunderLAN ethernet device driver
-.Sh SYNOPSIS
-.Cd "device tl0"
-.Sh DESCRIPTION
-The
-.Nm
-driver provides support for PCI ethernet adapters based on the Texas
-Instruments ThunderLAN ethernet controller chip. This includes a large
-number of Compaq PCI-bus ethernet adapters as well as the integrated
-ethernet controllers built in to several models of Compaq Prosignia
-servers and Compaq Deskpro desktop machines. This driver also supports
-the Olicom OC-2135/2138, OC-2325 and OC-2326 10/100 TX UTP adapters
-and the Racore 8165 10/100baseTX and 8148 10baseT/100baseTX/100baseFX
-multi-personality cards.
-.Pp
-The ThunderLAN controller has a standard MII interface that supports
-up to 32 physical interface devices (PHYs). It also has a built-in
-10baseT PHY hardwired at MII address 31, which may be used in some
-10Mbps-only hardware configurations. In 100Mbps configurations, a
-National Semiconductor DP83840A or other MII-compliant PHY may be
-attached to the ThunderLAN's MII bus. If a DP83840A or equivalent
-is available, the ThunderLAN chip can operate at either 100Mbps or
-10Mbps in either half-duplex or full-duplex modes. The ThunderLAN's
-built-in PHY and the DP83840A also support autonegotiation.
-.Pp
-The
-.Nm
-driver supports the following media types:
-.Pp
-.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
-.It autoselect
-Enable autoselection of the media type and options. Note that this
-option is only available on those PHYs that support autonegotiation.
-Also, the PHY will not advertise those modes that have been explcitly
-disabled using the following media options.
-.It 10baseT/UTP
-Set 10Mbps operation
-.It 100baseTX
-Set 100Mbps (fast ethernet) operation
-.It 10base5/AUI
-Enable AUI/BNC interface (useful only with the built-in PHY).
-.El
-.Pp
-The
-.Nm
-driver supports the following media options:
-.Pp
-.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
-.It full-duplex
-Force full duplex operation
-.It half-duplex
-Force half duplex operation.
-.It hw-loopback
-Enable hardware loopback mode.
-.El
-.Pp
-Note that the 100baseTX media type is only available if supported
-by the PHY.
-For more information on configuring this device, see
-.Xr ifconfig 8 .
-.Sh DIAGNOSTICS
-.Bl -diag
-.It "tl%d: couldn't map memory"
-A fatal initialization error has occurred.
-.It "tl%d: couldn't map interrupt"
-A fatal initialization error has occurred.
-.It "tl%d: device timeout"
-The device has stopped responding to the network, or there is a problem with
-the network connection (cable).
-.It "tl%d: no memory for rx list"
-The driver failed to allocate an mbuf for the receiver ring.
-.It "tl%d: no memory for tx list"
-The driver failed to allocate an mbuf for the transmitter ring when
-allocating a pad buffer or collapsing an mbuf chain into a cluster.
-.El
-.Sh SEE ALSO
-.Xr arp 4 ,
-.Xr netintro 4 , 
-.Xr ifconfig 8
-.Sh HISTORY
-The
-.Nm
-device driver first appeared in
-.Fx 2.2 .
-.Sh AUTHORS
-The
-.Nm
-driver was written by
-.An Bill Paul Aq wpaul@ctr.columbia.edu .