-mdoc sweep.

14 files changed, 100 insertions, 93 deletions

diff --git a/sbin/atacontrol/atacontrol.8 b/sbin/atacontrol/atacontrol.8
index 8cc5aa8..3333e17 100644
--- a/sbin/atacontrol/atacontrol.8
+++ b/sbin/atacontrol/atacontrol.8
@@ -197,10 +197,10 @@ Show info about the attached devices on the
 Show info about all attached devices on all active controllers.
 .El
 .Sh EXAMPLES
-To get information on devices attached to a channel,                                             
-use the command line:                                                                            
-.Pp                                                                                               
-.Dl "atacontrol info ata0"                                                                        
+To get information on devices attached to a channel,
+use the command line:
+.Pp
+.Dl "atacontrol info ata0"
 .Pp
 To see the devices' current access modes, use the command line:
 .Pp
diff --git a/sbin/bsdlabel/bsdlabel.8 b/sbin/bsdlabel/bsdlabel.8
index 28d482e..46b1bdc 100644
--- a/sbin/bsdlabel/bsdlabel.8
+++ b/sbin/bsdlabel/bsdlabel.8
@@ -31,7 +31,7 @@
 .\"	@(#)disklabel.8	8.2 (Berkeley) 4/19/94
 .\" $FreeBSD$
 .\"
-.Dd March 15, 2003
+.Dd September 17, 2005
 .Dt BSDLABEL 8
 .Os
 .Sh NAME
@@ -109,12 +109,9 @@ argument forces
 .Nm
 to use a layout suitable for a different architecture.
 Current valid values are
-.Ar i386 ,
-.Ar amd64 ,
-.Ar ia64 ,
-.Ar pc98 ,
+.Cm i386 , amd64 , ia64 , pc98 ,
 and
-.Ar alpha .
+.Cm alpha .
 If this option is omitted,
 .Nm
 will use a layout suitable for the current machine.
diff --git a/sbin/ggate/ggatec/ggatec.8 b/sbin/ggate/ggatec/ggatec.8
index 9f6bc00..a88e0cb 100644
--- a/sbin/ggate/ggatec/ggatec.8
+++ b/sbin/ggate/ggatec/ggatec.8
@@ -84,7 +84,9 @@ daemon and create a
 .Nm ggate
 provider related to the given remote file or device.
 .It Cm rescue
-If ggatec process died/has been killed, you can save situation with this
+If
+.Nm
+process died/has been killed, you can save situation with this
 command, which creates new connection to the
 .Xr ggated 8
 daemon and will handle pending and future requests.
diff --git a/sbin/gpt/gpt.8 b/sbin/gpt/gpt.8
index 419ec9a..ab2d87c 100644
--- a/sbin/gpt/gpt.8
+++ b/sbin/gpt/gpt.8
@@ -224,7 +224,9 @@ The
 option is used to read the label from the specified file.
 Only the first line is read from the file and the trailing newline
 character is stripped.
-If the file name is the dash or minus sign (-), the label is read from
+If the file name is the dash or minus sign
+.Pq Fl ,
+the label is read from
 the standard input.
 The
 .Fl l Ar label
@@ -286,7 +288,7 @@ type.
 The option has no effect on non-GPT partitions.
 With the
 .Fl u
-option the GPT partition type is displayed as an UUID instead of in an
+option the GPT partition type is displayed as an UUID instead of in a
 user friendly form.
 The
 .Fl l
diff --git a/sbin/ifconfig/ifconfig.8 b/sbin/ifconfig/ifconfig.8
index 54687a2..70413de 100644
--- a/sbin/ifconfig/ifconfig.8
+++ b/sbin/ifconfig/ifconfig.8
@@ -285,15 +285,15 @@ of the interface to
 .Ar type .
 Some interfaces support the mutually exclusive use of one of several
 different physical media connectors.
-For example, a 10Mb/s Ethernet
+For example, a 10Mbit/s Ethernet
 interface might support the use of either
 .Tn AUI
 or twisted pair connectors.
 Setting the media type to
-.Dq Li 10base5/AUI
+.Cm 10base5/AUI
 would change the currently active connector to the AUI port.
 Setting it to
-.Dq Li 10baseT/UTP
+.Cm 10baseT/UTP
 would activate twisted pair.
 Refer to the interfaces' driver
 specific documentation or man page for a complete list of the
@@ -316,11 +316,11 @@ operating mode on the interface to
 .Ar mode .
 For IEEE 802.11 wireless interfaces that support multiple operating modes
 this directive is used to select between 802.11a
-.Pq Dq Li 11a ,
+.Pq Cm 11a ,
 802.11b
-.Pq Dq Li 11b ,
+.Pq Cm 11b ,
 and 802.11g
-.Pq Dq Li 11g
+.Pq Cm 11g
 operating modes.
 .It Cm name Ar name
 Set the interface name to
@@ -534,19 +534,17 @@ Set the desired authentication mode in infrastructure mode.
 Not all adaptors support all modes.
 The set of
 valid modes is
-.Dq Li none ,
-.Dq Li open ,
-.Dq Li shared
+.Cm none , open , shared
 (shared key),
-.Dq Li 8021x
+.Cm 8021x
 (IEEE 802.1x),
 and
-.Dq Li wpa
+.Cm wpa
 (IEEE WPA/WPA2/802.11i).
 The
-.Dq Li 8021x
+.Cm 8021x
 and
-.Dq Li wpa
+.Cm wpa
 modes are only useful when using an authentication service
 (a supplicant for client operation or an authenticator when
 operating as an access point).
@@ -563,10 +561,9 @@ Specify the MAC address of the access point to use when operating
 as a station in a BSS network.
 This overrides any automatic selection done by the system.
 To disable a previously selected access point, supply
-.Dq Li any ,
-.Dq Li none ,
+.Cm any , none ,
 or
-.Dq Li -
+.Cm -
 for the address.
 This option is useful when more than one access points have the same SSID.
 Another name for the
@@ -589,10 +586,10 @@ Channels range from 1 to 255, but the exact selection available
 depends on the region your adaptor was manufactured for.
 Setting
 the channel to
-.Dq Li 0 ,
-.Dq Li any ,
+.Li 0 ,
+.Cm any ,
 or
-.Dq Li -
+.Cm -
 will give you the default for your adaptor.
 Some
 adaptors ignore this setting unless you are in ad-hoc mode.
@@ -607,7 +604,7 @@ The
 .Ar period
 specifies the number of beacon intervals between DTIM
 and must be in the range 1 to 15.
-By default DTIM is 1 (i.e. DTIM occurs at each beacon).
+By default DTIM is 1 (i.e., DTIM occurs at each beacon).
 .It Cm fragthreshold Ar length
 Set the threshold for which transmitted frames are broken into fragments.
 The
@@ -616,66 +613,66 @@ argument is the frame size in bytes and must be in the range 256 to 2346.
 Setting
 .Ar length
 to
-.Dq Li 2346 ,
-.Dq Li any ,
+.Li 2346 ,
+.Cm any ,
 or
-.Dq Li -
+.Cm -
 disables transmit fragmentation.
 Not all adaptors honor the fragmentation threshold.
 .It Cm hidessid
 When operating as an access point, do not broadcast the SSID
 in beacon frames or respond to probe request frames unless
-they are directed to the ap (i.e. they include the ap's SSID).
+they are directed to the ap (i.e., they include the ap's SSID).
 By default, the SSID is included in beacon frames and
 undirected probe request frames are answered.
 To re-enable the broadcast of the SSID etc., use
 .Fl hidessid .
-.It Cm list Cm active
+.It Cm list active
 Display the list of channels available for use taking into account
 any restrictions set with the
-.Dq Li chanlist
+.Cm chanlist
 and
-.Dq Li channel
+.Cm channel
 directives.
-.It Cm list Cm caps
+.It Cm list caps
 Display the adaptor's capabilities, including the operating
 modes supported.
-.It Cm list Cm chan
+.It Cm list chan
 Display the list of channels available for use.
-.Dq Li list freq
+.Cm list freq
 is another way of requesting this information.
-.It Cm list Cm mac
+.It Cm list mac
 Display the current MAC Access Control List state.
 Each address is prefixed with a character that indicates the
 current policy applied to it:
-.Dq Li +
+.Ql +
 indicates the address is allowed access,
-.Dq Li -
+.Ql -
 indicates the address is denied access,
-.Dq Li *
+.Ql *
 indicates the address is present but the current policy open
-(so the acl is not consulted).
-.It Cm list Cm scan
+(so the ACL is not consulted).
+.It Cm list scan
 Display the access points and/or ad-hoc neighbors
 located in the vicinity.
 This information may be updated automatically by the adaptor
 and/or with a
-.Dq Li scan
+.Cm scan
 request.
-.Dq Li list ap
+.Cm list ap
 is another way of requesting this information.
-.It Cm list Cm sta
+.It Cm list sta
 When operating as an access point display the stations that are
 currently associated.
 When operating in ad-hoc mode display stations identified as
 neighbors in the IBSS.
-.It Cm list Cm wme
+.It Cm list wme
 Display the current parameters to use when operating in WME mode.
 When WME mode is enabled for an adaptor this information will be
 displayed with the regular status; this command is mostly useful
 for examining parameters when WME mode is disabled.
 See the description of the
-.Dq Li wme
+.Cm wme
 directive for information on the various parameters.
 .It Cm powersave
 Enable powersave operation.
@@ -697,11 +694,10 @@ For interfaces operating in 802.11g, use the specified
 .Ar technique
 for protecting OFDM frames in a mixed 11b/11g network.
 The set of valid techniques is
-.Dq Li off ,
-.Dq Li cts
+.Cm off , cts
 (CTS to self),
 and
-.Dq Li rtscts
+.Cm rtscts
 (RTS/CTS).
 Technique names are case insensitive.
 .It Cm pureg
@@ -717,11 +713,11 @@ is broken.
 The
 .Ar mode
 argument may be one of
-.Dq Li device
+.Cm device
 (leave it to the hardware device to decide),
-.Dq Li auto
+.Cm auto
 (handle either in the device or the operating system\[em]as appropriate),
-.Dq Li manual
+.Cm manual
 (do nothing until explicitly instructed).
 By default, the device is left to handle this if it is
 capable; otherwise, the operating system will automatically
@@ -740,10 +736,10 @@ is the frame size in bytes and must be in the range 1 to 2346.
 Setting
 .Ar length
 to
-.Dq Li 2346 ,
-.Dq Li any ,
+.Li 2346 ,
+.Cm any ,
 or
-.Dq Li -
+.Cm -
 disables transmission of RTS frames.
 Not all adaptors support setting the RTS threshold.
 .It Cm ssid Ar ssid
@@ -788,7 +784,7 @@ Indicates that the network is using a short slot time.
 .El
 .Pp
 The
-.Dq Li list scan
+.Cm list scan
 request can be used to show recent scan results without
 initiating a new scan.
 .It Cm stationname Ar name
@@ -813,21 +809,20 @@ Not all adaptors support changing the transmit power.
 Set the desired WEP mode.
 Not all adaptors support all modes.
 The set of valid modes is
-.Dq Li off ,
-.Dq Li on ,
+.Cm off , on ,
 and
-.Dq Li mixed .
+.Cm mixed .
 The
-.Dq Li mixed
+.Cm mixed
 mode explicitly tells the adaptor to allow association with access
 points which allow both encrypted and unencrypted traffic.
 On these adaptors,
-.Dq Li on
+.Cm on
 means that the access point must only allow encrypted connections.
 On other adaptors,
-.Dq Li on
+.Cm on
 is generally another name for
-.Dq Li mixed .
+.Cm mixed .
 Modes are case insensitive.
 .It Cm weptxkey Ar index
 Set the WEP key to be used for transmission.
@@ -871,22 +866,30 @@ The latter are received from the access point and may not be changed
 (at the station).
 The following Access Categories are recognized:
 .Pp
-.Bl -tag -width AC_BK -compact
+.Bl -tag -width ".Cm AC_BK" -compact
 .It Cm AC_BE
-(or BE) best effort delivery,
+(or
+.Cm BE )
+best effort delivery,
 .It Cm AC_BK
-(or BK) background traffic,
+(or
+.Cm BK )
+background traffic,
 .It Cm AC_VI
-(or VI) video traffic,
+(or
+.Cm VI )
+video traffic,
 .It Cm AC_VO
-(or VO) voice traffic.
+(or
+.Cm VO )
+voice traffic.
 .El
 .Pp
 AC parameters are case-insensitive.
 Traffic classification is done in the operating system using the
 vlan priority associated with data frames or the
 ToS (Type of Service) indication in IP-encapsulated frames.
-If neither information is present traffic is assigned to the
+If neither information is present, traffic is assigned to the
 Best Effort (BE) category.
 .Bl -tag -width indent
 .It Cm ack Ar ac
diff --git a/sbin/init/init.8 b/sbin/init/init.8
index 833e2f6..cff2b34 100644
--- a/sbin/init/init.8
+++ b/sbin/init/init.8
@@ -272,7 +272,8 @@ as
 (the InterNetNews server).
 If this script does not terminate within 120 seconds,
 .Nm
-will terminate it. The timeout can be configured via the
+will terminate it.
+The timeout can be configured via the
 .Xr sysctl 8
 variable
 .Va kern.init_shutdown_timeout .
@@ -348,12 +349,12 @@ a persistent device error condition.
 .Xr login 1 ,
 .Xr sh 1 ,
 .Xr ttys 5 ,
+.Xr security 7 ,
 .Xr getty 8 ,
 .Xr halt 8 ,
 .Xr jail 8 ,
 .Xr rc 8 ,
 .Xr reboot 8 ,
-.Xr security 7 ,
 .Xr shutdown 8 ,
 .Xr sysctl 8
 .Sh HISTORY
diff --git a/sbin/ipfw/ipfw.8 b/sbin/ipfw/ipfw.8
index d536120..13dd4e9 100644
--- a/sbin/ipfw/ipfw.8
+++ b/sbin/ipfw/ipfw.8
@@ -412,14 +412,15 @@ The format of
 .Nm
 rules is the following:
 .Bd -ragged -offset indent
+.Bk -words
 .Op Ar rule_number
 .Op Cm set Ar set_number
 .Op Cm prob Ar match_probability
-.br
-.Ar "   " action
+.Ar action
 .Op Cm log Op Cm logamount Ar number
 .Op Cm altq Ar queue
 .Ar body
+.Ek
 .Ed
 .Pp
 where the body of the rule specifies which information is used
@@ -2438,9 +2439,9 @@ the sleep terminates thus restoring the previous situation.
 .Xr cpp 1 ,
 .Xr m4 1 ,
 .Xr altq 4 ,
-.Xr if_bridge 4 ,
 .Xr divert 4 ,
 .Xr dummynet 4 ,
+.Xr if_bridge 4 ,
 .Xr ip 4 ,
 .Xr ipfirewall 4 ,
 .Xr ng_ipfw 4 ,
diff --git a/sbin/kldload/kldload.8 b/sbin/kldload/kldload.8
index 7118781..aaba5f7 100644
--- a/sbin/kldload/kldload.8
+++ b/sbin/kldload/kldload.8
@@ -48,7 +48,7 @@ The
 extension name is not mandatory when loading a given module
 using
 .Nm .
-It doesn't hurt to specify it though.
+It does not hurt to specify it though.
 .Pp
 The following option is available:
 .Bl -tag -width indent
diff --git a/sbin/kldstat/kldstat.8 b/sbin/kldstat/kldstat.8
index 5a8565e..3500839 100644
--- a/sbin/kldstat/kldstat.8
+++ b/sbin/kldstat/kldstat.8
@@ -25,7 +25,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd April 25, 1997
+.Dd September 23, 2005
 .Dt KLDSTAT 8
 .Os
 .Sh NAME
diff --git a/sbin/ldconfig/ldconfig.8 b/sbin/ldconfig/ldconfig.8
index 40d891a..49e22dd 100644
--- a/sbin/ldconfig/ldconfig.8
+++ b/sbin/ldconfig/ldconfig.8
@@ -29,7 +29,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd October 3, 1993
+.Dd November 11, 2005
 .Dt LDCONFIG 8
 .Os
 .Sh NAME
diff --git a/sbin/mount_cd9660/mount_cd9660.8 b/sbin/mount_cd9660/mount_cd9660.8
index 2d293e2..909af40 100644
--- a/sbin/mount_cd9660/mount_cd9660.8
+++ b/sbin/mount_cd9660/mount_cd9660.8
@@ -32,7 +32,7 @@
 .\"     @(#)mount_cd9660.8	8.3 (Berkeley) 3/27/94
 .\" $FreeBSD$
 .\"
-.Dd October 03, 2005
+.Dd October 3, 2005
 .Dt MOUNT_CD9660 8
 .Os
 .Sh NAME
diff --git a/sbin/ping/ping.8 b/sbin/ping/ping.8
index ee723a0..0e80de1 100644
--- a/sbin/ping/ping.8
+++ b/sbin/ping/ping.8
@@ -149,17 +149,18 @@ This can be very hard on a network and should be used with caution.
 Specify the maximum size of
 .Tn ICMP
 payload when sending sweeping pings.
-This option is required for ping sweeps. 
+This option is required for ping sweeps.
 .It Fl g Ar sweepminsize
 Specify the size of
 .Tn ICMP
-payload to start with when sending sweeping pings. 
+payload to start with when sending sweeping pings.
 The default value is 0.
 .It Fl h Ar sweepincrsize
 Specify the number of bytes to increment the size of
 .Tn ICMP
 payload after
-each sweep when sending sweeping pings. The default value is 1.
+each sweep when sending sweeping pings.
+The default value is 1.
 .It Fl I Ar iface
 Source multicast packets with the given interface address.
 This flag only applies if the ping destination is a multicast address.
diff --git a/sbin/reboot/boot_i386.8 b/sbin/reboot/boot_i386.8
index fd0cfcd..bc1560d 100644
--- a/sbin/reboot/boot_i386.8
+++ b/sbin/reboot/boot_i386.8
@@ -260,7 +260,7 @@ is disabled.
 This option only affects second-stage bootstrap,
 to prevent next stages from writing to the console use in
 combination with the
-.Fl m 
+.Fl m
 option.
 .It Fl r
 use the statically configured default for the device containing the
@@ -282,7 +282,7 @@ The default is 9600 unless it has been overridden by setting
 .Va BOOT_COMCONSOLE_SPEED
 in
 .Xr make.conf 5
-and recompiling the boot blocks.
+and recompiling and reinstalling the boot blocks.
 .It Fl v
 be verbose during device probing (and later).
 .El
diff --git a/sbin/sysctl/sysctl.8 b/sbin/sysctl/sysctl.8
index e7db649..b87061c 100644
--- a/sbin/sysctl/sysctl.8
+++ b/sbin/sysctl/sysctl.8
@@ -28,7 +28,7 @@
 .\"	From: @(#)sysctl.8	8.1 (Berkeley) 6/6/93
 .\" $FreeBSD$
 .\"
-.Dd March 10, 2002
+.Dd September 15, 2005
 .Dt SYSCTL 8
 .Os
 .Sh NAME
@@ -36,7 +36,7 @@
 .Nd get or set kernel state
 .Sh SYNOPSIS
 .Nm
-.Op Fl bdehNnox
+.Op Fl bdehNnoqx
 .Ar name Ns Op = Ns Ar value
 .Ar ...
 .Nm