Sort sections.

8 files changed, 16 insertions, 16 deletions

diff --git a/sbin/geom/class/concat/gconcat.8 b/sbin/geom/class/concat/gconcat.8
index 4e729a2..f13a789 100644
--- a/sbin/geom/class/concat/gconcat.8
+++ b/sbin/geom/class/concat/gconcat.8
@@ -153,6 +153,8 @@ This can be set to a number between 0 and 3 inclusive.
 If set to 0 minimal debug information is printed, and if set to 3 the
 maximum amount of debug information is printed.
 .El
+.Sh EXIT STATUS
+Exit status is 0 on success, and 1 if the command fails.
 .Sh EXAMPLES
 The following example shows how to configure four disks for automatic
 concatenation, create a file system on it, and mount it:
@@ -165,8 +167,6 @@ umount /mnt
 gconcat stop data
 gconcat unload
 .Ed
-.Sh EXIT STATUS
-Exit status is 0 on success, and 1 if the command fails.
 .Sh SEE ALSO
 .Xr geom 4 ,
 .Xr loader.conf 5 ,
diff --git a/sbin/geom/class/label/glabel.8 b/sbin/geom/class/label/glabel.8
index 0fb4d95..5af9572 100644
--- a/sbin/geom/class/label/glabel.8
+++ b/sbin/geom/class/label/glabel.8
@@ -178,6 +178,8 @@ This can be set to a number between 0 and 2 inclusive.
 If set to 0 minimal debug information is printed, and if set to 2 the
 maximum amount of debug information is printed.
 .El
+.Sh EXIT STATUS
+Exit status is 0 on success, and 1 if the command fails.
 .Sh EXAMPLES
 The following example shows how to set up a label for disk
 .Dq Li da2 ,
@@ -197,8 +199,6 @@ The next example shows how to set up a label for a UFS file system:
 tunefs -L data /dev/da4s1a
 mount /dev/ufs/data /mnt/data
 .Ed
-.Sh EXIT STATUS
-Exit status is 0 on success, and 1 if the command fails.
 .Sh SEE ALSO
 .Xr geom 4 ,
 .Xr loader.conf 5 ,
diff --git a/sbin/geom/class/mirror/gmirror.8 b/sbin/geom/class/mirror/gmirror.8
index 350df8e..a90634c 100644
--- a/sbin/geom/class/mirror/gmirror.8
+++ b/sbin/geom/class/mirror/gmirror.8
@@ -220,6 +220,8 @@ Additional options include:
 .It Fl v
 Be more verbose.
 .El
+.Sh EXIT STATUS
+Exit status is 0 on success, and 1 if the command fails.
 .Sh EXAMPLES
 Use 3 disks to setup a mirror.
 Choose split balance algorithm, split only
@@ -268,8 +270,6 @@ gmirror deactivate data da1
 dd if=/dev/da1 of=/backup/data.img bs=1m
 gmirror activate data da1
 .Ed
-.Sh EXIT STATUS
-Exit status is 0 on success, and 1 if the command fails.
 .Sh SEE ALSO
 .Xr geom 4 ,
 .Xr geom 8 ,
diff --git a/sbin/geom/class/nop/gnop.8 b/sbin/geom/class/nop/gnop.8
index dfa209c..90f72bf 100644
--- a/sbin/geom/class/nop/gnop.8
+++ b/sbin/geom/class/nop/gnop.8
@@ -128,6 +128,8 @@ This can be set to a number between 0 and 2 inclusive.
 If set to 0 minimal debug information is printed, and if set to 2 the
 maximum amount of debug information is printed.
 .El
+.Sh EXIT STATUS
+Exit status is 0 on success, and 1 if the command fails.
 .Sh EXAMPLES
 The following example shows how to create a transparent provider for disk
 .Pa /dev/da0
@@ -136,8 +138,6 @@ with 50% failure probability, and how to destroy it.
 gnop create -v -f 50 da0
 gnop destroy -v da0.nop
 .Ed
-.Sh EXIT STATUS
-Exit status is 0 on success, and 1 if the command fails.
 .Sh SEE ALSO
 .Xr geom 4 ,
 .Xr geom 8
diff --git a/sbin/geom/class/raid3/graid3.8 b/sbin/geom/class/raid3/graid3.8
index 16669fe..69da6e7 100644
--- a/sbin/geom/class/raid3/graid3.8
+++ b/sbin/geom/class/raid3/graid3.8
@@ -191,6 +191,8 @@ Additional options include:
 .It Fl v
 Be more verbose.
 .El
+.Sh EXIT STATUS
+Exit status is 0 on success, and 1 if the command fails.
 .Sh EXAMPLES
 Use 3 disks to setup a RAID3 array (with the round-robin reading feature).
 Create a file system, mount it, then unmount it and stop device:
@@ -217,8 +219,6 @@ Replace one data disk with a brand new one:
 graid3 remove -n 0 data
 graid3 insert -n 0 data da5
 .Ed
-.Sh EXIT STATUS
-Exit status is 0 on success, and 1 if the command fails.
 .Sh SEE ALSO
 .Xr geom 4 ,
 .Xr geom 8 ,
diff --git a/sbin/geom/class/shsec/gshsec.8 b/sbin/geom/class/shsec/gshsec.8
index 14e8a46..2751cdc 100644
--- a/sbin/geom/class/shsec/gshsec.8
+++ b/sbin/geom/class/shsec/gshsec.8
@@ -101,6 +101,8 @@ Hardcode providers' names in metadata.
 .It Fl v
 Be more verbose.
 .El
+.Sh EXIT STATUS
+Exit status is 0 on success, and 1 if the command fails.
 .Sh EXAMPLES
 The following example shows how to created a shared secret device.
 Secret will be split between a slice on the local disk and a USB Pen drive.
@@ -113,8 +115,6 @@ From now on, when USB Pen drive will be inserted, it will be automatically
 detected and connected making secret available via
 .Pa /dev/shsec/secret
 device.
-.Sh EXIT STATUS
-Exit status is 0 on success, and 1 if the command fails.
 .Sh SEE ALSO
 .Xr geom 4 ,
 .Xr gbde 8 ,
diff --git a/sbin/geom/class/stripe/gstripe.8 b/sbin/geom/class/stripe/gstripe.8
index 9e6b720..b9f10e3 100644
--- a/sbin/geom/class/stripe/gstripe.8
+++ b/sbin/geom/class/stripe/gstripe.8
@@ -190,6 +190,8 @@ If this value is large, you should consider increasing the
 .Va kern.geom.stripe.maxmem
 value.
 .El
+.Sh EXIT STATUS
+Exit status is 0 on success, and 1 if the command fails.
 .Sh EXAMPLES
 The following example shows how to set up a striped device from four disks with a
 4 KB stripe size for automatic configuration,
@@ -204,8 +206,6 @@ umount /mnt
 gstripe stop data
 gstripe unload
 .Ed
-.Sh EXIT STATUS
-Exit status is 0 on success, and 1 if the command fails.
 .Sh COMPATIBILITY
 The
 .Nm
diff --git a/sbin/geom/core/geom.8 b/sbin/geom/core/geom.8
index 2ac8d413..6e214fb 100644
--- a/sbin/geom/core/geom.8
+++ b/sbin/geom/core/geom.8
@@ -94,6 +94,8 @@ RAID3
 .It
 STRIPE
 .El
+.Sh EXIT STATUS
+Exit status is 0 on success, and 1 if the command fails.
 .Sh EXAMPLES
 The following example shows how to set up a stripe on three disks for automatic
 configuration:
@@ -112,8 +114,6 @@ Unload a kernel module which implements the MD class:
 .Bd -literal -offset indent
 geom md unload
 .Ed
-.Sh EXIT STATUS
-Exit status is 0 on success, and 1 if the command fails.
 .Sh SEE ALSO
 .Xr geom 4 ,
 .Xr gconcat 8 ,