Allow fdisk to be driven from a configuration file, making a 3rd-party

utility for front-ending its operation more of a possibility.

2.2-RELEASE candiate.  Closes PR#1960
Submitted-By: Darryl Okahata <darrylo@hpnmhjw.sr.hp.com>

2 files changed, 771 insertions, 51 deletions

diff --git a/sbin/fdisk/fdisk.8 b/sbin/fdisk/fdisk.8
index 36780e7..a43a85a 100644
--- a/sbin/fdisk/fdisk.8
+++ b/sbin/fdisk/fdisk.8
@@ -1,4 +1,4 @@
-.Dd April 4, 1993
+.Dd October 4, 1996
 .Dt FDISK 8
 .\".Os BSD 4
 .Sh NAME
@@ -10,32 +10,14 @@
 .Op Fl u
 .Op Fl a
 .Op Fl 0123
-.Op disk
+.Op Ar disk
 .Bl -tag -width time
-.It Fl u
-Is used for updating (editing) sector 0 of the disk.
-.It Fl i
-Initializes sector 0 of the disk.  This implies
-.Fl u .
-.It Fl a
-Change the active partition only.
-.It Fl 0123
-Operate on a single fdisk entry only.
-.El
-.Pp
-The final disk name can be provided as a
-.Sq bare
-disk name only, e.g.
-.Ql sd0 ,
-or as a fully qualified device node under
-.Pa /dev .
-If omitted, the disks
-.Ql wd0 ,
-.Ql sd0 ,
-and
-.Ql od0
-are being searched in that order, until one is
-being found responding.
+.Nm fdisk
+.Op Fl f Ar configfile
+.Op Fl i
+.Op Fl v
+.Op Fl t
+.Op Ar disk
 .Sh PROLOGUE
 In order for the BIOS to boot the kernel,
 certain conventions must be adhered to.
@@ -60,9 +42,84 @@ The DOS
 program can be used to divide space on the disk into partitions and set one
 .Em active.
 .Sh DESCRIPTION
+.Pp
 The FreeBSD program
 .Nm
-serves a similar purpose to the DOS program.
+serves a similar purpose to the DOS program.  The first form is used to
+display partition information or to interactively edit the partition
+table.  The second is used to write a partition table using a
+.Ar configfile
+and is designed to be used by other scripts/programs.
+.Pp
+Options are:
+.It Fl u
+Is used for updating (editing) sector 0 of the disk.  Ignored if
+.Fl f
+is given.
+.It Fl i
+Initializes sector 0 of the disk.  This implies
+.Fl u ,
+unless
+.Fl f
+is given.
+.It Fl a
+Change the active partition only.  Ignored if
+.Fl f
+is given.
+.It Fl 0123
+Operate on a single fdisk entry only.  Ignored if
+.Fl f
+is given.
+.It Fl f Ar configfile
+Set partition values using the file
+.Ar configfile .
+The
+.Ar configfile
+always modifies existing partitions, unless
+.Fl i
+is also given, in which case all existing partitions are deleted (marked
+as "unused") before the
+.Ar configfile
+is read.  The
+.Ar configfile
+can be "-", in which case
+.Ar stdin
+is read.  See
+.Em CONFIGURATION FILE ,
+below, for file syntax.
+.Pp
+.Em WARNING:
+when
+.Fl f
+is used, you are not asked if you really want to write the partition
+table (as you are in the interactive mode).  Use with caution!
+.It Fl t
+Test mode; do not write partition values.  Generally used with the
+.Fl f
+option to see what would be written to the partition table.  Implies
+.Fl v .
+.It Fl v
+Be verbose.  When
+.Fl f
+is used,
+.Nm
+prints out the partition table that is written to the disk.
+.El
+.Pp
+The final disk name can be provided as a
+.Sq bare
+disk name only, e.g.
+.Ql sd0 ,
+or as a fully qualified device node under
+.Pa /dev .
+If omitted, the disks
+.Ql wd0 ,
+.Ql sd0 ,
+and
+.Ql od0
+are being searched in that order, until one is
+being found responding.
+.Pp
 When called with no arguments, it prints the sector 0 partition table.
 An example follows:
 
@@ -119,8 +176,11 @@ The flags
 .Fl i
 or
 .Fl u
-are used to indicate that the partition data is to be updated.
-The
+are used to indicate that the partition data is to be updated, unless the
+.Fl f
+option is used.  If the
+.Fl f
+option is not used, the
 .Nm
 program will enter a conversational mode.
 This mode is designed not to change any data unless you explicitly tell it to.
@@ -188,11 +248,151 @@ A number of decisions made later may assume this.
 Editing an existing partition will most likely cause you to
 lose all the data in that partition.
 .Pp
-You should run this program interactively once or twice to see how it works.
-This is completely safe as long as you answer the last question in the negative.
-There are subtleties
-that the program detects
-that are not fully explained in this manual page.
+You should run this program interactively once or twice to see how it
+works.  This is completely safe as long as you answer the last question
+in the negative.  There are subtleties that the program detects that are
+not fully explained in this manual page.
+.Sh CONFIGURATION FILE
+.Pp
+When the
+.Fl f
+option is given, a disk's partition table can be written using values
+from a
+.Ar configfile .
+The syntax of this file is very simple.  Each line is either a comment or
+a specification, and whitespace (except for newlines) are ignored:
+.Bl -tag -width Ds
+.It Xo
+.Ic #
+.No Ar comment ...
+.Xc
+Lines beginning with a "#" are comments and are ignored.
+.It Xo
+.Ic g
+.No Ar spec1
+.No Ar spec2
+.No Ar spec3
+.Xc
+Set the BIOS geometry used in partition calculations.  There must be
+three values specfied, with a letter preceding each number:
+.Bl -tag -width Ds
+.Sm off
+.It Cm c No Ar num
+.Sm on
+Set the number of cylinders to
+.Ar num .
+.Sm off
+.It Cm h No Ar num
+.Sm on
+Set the number of heads to
+.Ar num .
+.Sm off
+.It Cm s No Ar num
+.Sm on
+Set the number of sectors/track to
+.Ar num .
+.El
+.Pp
+These specs can occur in any order, as the leading letter determines
+which value is which; however, all three must be specified.
+.Pp
+This line must occur before any lines that specify partition
+information.
+.Pp
+It is an error if the following is not true:
+.Pp
+.nf
+        1 <= number of cylinders
+        1 <= number of heads <= 256
+        1 <= number of sectors/track < 64
+.fi
+.Pp
+The number of cylinders should be less than or equal to 1024, but this
+is not enforced, although a warning will be output.  Note that bootable
+FreeBSD partitions (the "/" filesystem) must lie completely within the
+first 1024 cylinders; if this is not true, booting may fail.
+Non-bootable partitions do not have this restriction.
+.Pp
+Example (all of these are equivalent), for a disk with 1019 cylinders,
+39 heads, and 63 sectors:
+.Pp
+.nf
+        g       c1019   h39     s63
+        g       h39     c1019   s63
+        g       s63     h39     c1019
+.fi
+.It Xo
+.Ic p
+.No Ar partition
+.No Ar type
+.No Ar start
+.No Ar length
+.Xc
+Set the partition given by
+.Ar partition
+(0-3) to type
+.Ar type ,
+starting at sector
+.Ar start
+for
+.Ar length
+sectors.
+.Pp
+Only those partitions explicitly mentioned by these lines are modified;
+any partition not referenced by a "p" line will not be modified.
+However, if an invalid partition table is present, or the
+.Fl i
+option is specified, all existing partition entries will be cleared
+(marked as unused), and these "p" lines will have to be used to
+explicitly set partition information.  If multiple partitions need to be
+set, multiple "p" lines must be specified; one for each partition.
+.Pp
+These partition lines must occur after any geometry specification lines,
+if one is present.
+.Pp
+The
+.Ar type
+is 165 for FreeBSD partitions.  Specifying a partition type of zero is
+the same as clearing the partition and marking it as unused; however,
+dummy values (such as "0") must still be specified for
+.Ar start
+and
+.Ar length .
+.Pp
+Note: the start offset will be rounded upwards to a head boundary if
+necessary, and the end offset will be rounded downwards to a cylinder
+boundary if necessary.
+.Pp
+Example: to clear partition 3 and mark it as unused:
+.Pp
+.nf
+        p       3       0       0       0
+.fi
+.Pp
+Example: to set partition 0 to a FreeBSD partition, starting at sector 1
+for 2503871 sectors (note: these numbers will be rounded upwards and
+downwards to correspond to head and cylinder boundaries):
+.Pp
+.nf
+        p       0       165     1       2503871
+.fi
+.It Xo
+.Ic a
+.No Ar partition
+.Xc
+Make
+.Ar partition
+the active partition.  Can occur anywhere in the config file, but only
+one must be present.
+.Pp
+Example: to make partition 0 the active partition:
+.Pp
+.nf
+        a       0
+.fi
+
+.El
+.Pp
 .Sh SEE ALSO
 .Xr disklabel 8
 .Sh BUGS
@@ -203,3 +403,7 @@ Throughout this man page, the term
 is used where it should actually be
 .Sq slice ,
 in order to conform with the terms used elsewhere.
+.Pp
+You cannot use this command to completely dedicate a disk to FreeBSD.  The
+.Xr disklabel 8
+command must be used for this.
diff --git a/sbin/fdisk/fdisk.c b/sbin/fdisk/fdisk.c
index 13418c8..b89d865 100644
--- a/sbin/fdisk/fdisk.c
+++ b/sbin/fdisk/fdisk.c
@@ -90,9 +90,31 @@ int dos_cylsecs;
 static int partition = -1;
 
 
+#define MAX_ARGS	10
+
+static int	current_line_number;
+
+static int	geom_processed = 0;
+static int	part_processed = 0;
+static int	active_processed = 0;
+
+
+typedef struct cmd {
+    char		cmd;
+    int			n_args;
+    struct arg {
+	char	argtype;
+	int	arg_val;
+    }			args[MAX_ARGS];
+} CMD;
+
+
 static int a_flag  = 0;		/* set active partition */
 static int i_flag  = 0;		/* replace partition data */
 static int u_flag  = 0;		/* update partition data */
+static int t_flag  = 0;		/* test only, if f_flag is given */
+static char *f_flag = NULL;	/* Read config info from file */
+static int v_flag  = 0;		/* Be verbose */
 
 static unsigned char bootcode[] = {
 0x33, 0xc0, 0xfa, 0x8e, 0xd0, 0xbc, 0x00, 0x7c, 0x8e, 0xc0, 0x8e, 0xd8, 0xfb, 0x8b, 0xf4, 0xbf,
@@ -179,6 +201,7 @@ struct part_type
 static void print_s0(int which);
 static void print_part(int i);
 static void init_sector0(unsigned long start);
+static void init_boot(void);
 static void change_part(int i);
 static void print_params();
 static void change_active(int which);
@@ -194,6 +217,8 @@ static int write_s0();
 static int ok(char *str);
 static int decimal(char *str, int *num, int deflt);
 static char *get_type(int type);
+static int read_config(char *config_file);
+static void reset_boot(void);
 #if 0
 static int hex(char *str, int *num, int deflt);
 static int string(char *str, char **ans);
@@ -231,11 +256,37 @@ main(int argc, char *argv[])
 				case 'a':
 					a_flag = 1;
 					break;
+				case 'f':
+					if (*token)
+					{
+					    f_flag = token;
+					    token = "";
+					}
+					else
+					{
+					    if (argc == 1)
+					    {
+						goto usage;
+					    }
+					    --argc;
+					    f_flag = *++argv;
+					}
+					/*
+					 * u_flag is needed, because we're
+					 * writing to the disk.
+					 */
+					u_flag = 1;
+					break;
 				case 'i':
 					i_flag = 1;
 				case 'u':
 					u_flag = 1;
 					break;
+				case 't':
+					t_flag = 1;
+				case 'v':
+					v_flag = 1;
+					break;
 				default:
 					goto usage;
 				}
@@ -281,41 +332,75 @@ main(int argc, char *argv[])
 	}
 
 	printf("******* Working on device %s *******\n",disk);
-	if(u_flag)
+
+	if (f_flag)
 	{
-		get_params_to_use();
+	    if (read_s0() || i_flag)
+	    {
+		reset_boot();
+	    }
+
+	    if (!read_config(f_flag))
+	    {
+		exit(1);
+	    }
+	    if (v_flag)
+	    {
+		print_s0(-1);
+	    }
+	    if (!t_flag)
+	    {
+		write_s0();
+	    }
 	}
 	else
 	{
+	    if(u_flag)
+	    {
+		get_params_to_use();
+	    }
+	    else
+	    {
 		print_params();
-	}
+	    }
 
-	if (read_s0())
+	    if (read_s0())
 		init_sector0(1);
 
-	printf("Warning: BIOS sector numbering starts with sector 1\n");
-	printf("Information from DOS bootblock is:\n");
-	if (partition == -1)
+	    printf("Warning: BIOS sector numbering starts with sector 1\n");
+	    printf("Information from DOS bootblock is:\n");
+	    if (partition == -1)
 		for (i = 0; i < NDOSPART; i++)
-			change_part(i);
-	else
+		    change_part(i);
+	    else
 		change_part(partition);
 
-	if (u_flag || a_flag)
+	    if (u_flag || a_flag)
 		change_active(partition);
 
-	if (u_flag || a_flag) {
-		printf("\nWe haven't changed the partition table yet.  ");
-		printf("This is your last chance.\n");
+	    if (u_flag || a_flag) {
+		if (!t_flag)
+		{
+		    printf("\nWe haven't changed the partition table yet.  ");
+		    printf("This is your last chance.\n");
+		}
 		print_s0(-1);
-		if (ok("Should we write new partition table?"))
+		if (!t_flag)
+		{
+		    if (ok("Should we write new partition table?"))
 			write_s0();
+		}
+		else
+		{
+		    printf("\n-t flag specified -- partition table not written.\n");
+		}
+	    }
 	}
 
 	exit(0);
 
 usage:
-	printf("fdisk {-a|-i|-u} [-{0,1,2,3}] [disk]\n");
+	printf("fdisk {-a|-i|-u} [-f <config file> [-t] [-v]] [-{0,1,2,3}] [disk]\n");
 	return(1);
 }
 
@@ -359,14 +444,22 @@ struct dos_partition *partp = ((struct dos_partition *) &mboot.parts) + i;
 		,partp->dp_ehd);
 }
 
+
+static void
+init_boot(void)
+{
+	memcpy(mboot.bootinst, bootcode, sizeof(bootcode));
+	mboot.signature = BOOT_MAGIC;
+}
+
+
 static void
 init_sector0(unsigned long start)
 {
 struct dos_partition *partp = (struct dos_partition *) (&mboot.parts[3]);
 unsigned long size = disksecs - start;
 
-	memcpy(mboot.bootinst, bootcode, sizeof(bootcode));
-	mboot.signature = BOOT_MAGIC;
+	init_boot();
 
 	partp->dp_typ = DOSPTYP_386BSD;
 	partp->dp_flag = ACTIVE;
@@ -490,6 +583,7 @@ get_params_to_use()
 	}
 }
 
+
 /***********************************************\
 * Change real numbers into strange dos numbers	*
 \***********************************************/
@@ -779,3 +873,425 @@ get_type(int type)
 	}
 	return("unknown");
 }
+
+
+static void
+parse_config_line(line, command)
+    char	*line;
+    CMD		*command;
+{
+    char	*cp, *end;
+
+    cp = line;
+    while (1)	/* dirty trick used to insure one exit point for this
+		   function */
+    {
+	memset(command, 0, sizeof(*command));
+
+	while (isspace(*cp)) ++cp;
+	if (*cp == '\0' || *cp == '#')
+	{
+	    break;
+	}
+	command->cmd = *cp++;
+
+	/*
+	 * Parse args
+	 */
+	while (1)
+	{
+	    while (isspace(*cp)) ++cp;
+	    if (*cp == '#')
+	    {
+		break;		/* found comment */
+	    }
+	    if (isalpha(*cp))
+	    {
+		command->args[command->n_args].argtype = *cp++;
+	    }
+	    if (!isdigit(*cp))
+	    {
+		break;		/* assume end of line */
+	    }
+	    end = NULL;
+	    command->args[command->n_args].arg_val = strtol(cp, &end, 0);
+	    if (cp == end)
+	    {
+		break;		/* couldn't parse number */
+	    }
+	    cp = end;
+	    command->n_args++;
+	}
+	break;
+    }
+}
+
+
+static int
+process_geometry(command)
+    CMD		*command;
+{
+    int		status = 1, i;
+
+    while (1)
+    {
+	geom_processed = 1;
+	if (part_processed)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: the geometry specification line must occur before\n\
+    all partition specifications.\n",
+		    name, current_line_number);
+	    status = 0;
+	    break;
+	}
+	if (command->n_args != 3)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: incorrect number of geometry args\n",
+		    name, current_line_number);
+	    status = 0;
+	    break;
+	}
+	dos_cyls = -1;
+	dos_heads = -1;
+	dos_sectors = -1;
+	for (i = 0; i < 3; ++i)
+	{
+	    switch (command->args[i].argtype)
+	    {
+	    case 'c':
+		dos_cyls = command->args[i].arg_val;
+		break;
+	    case 'h':
+		dos_heads = command->args[i].arg_val;
+		break;
+	    case 's':
+		dos_sectors = command->args[i].arg_val;
+		break;
+	    default:
+		fprintf(stderr,
+			"%s: ERROR line %d: unknown geometry arg type: '%c' (0x%02x)\n",
+			name, current_line_number, command->args[i].argtype,
+			command->args[i].argtype);
+		status = 0;
+		break;
+	    }
+	}
+	if (status == 0)
+	{
+	    break;
+	}
+
+	dos_cylsecs = dos_heads * dos_sectors;
+
+	/*
+	 * Do sanity checks on parameter values
+	 */
+	if (dos_cyls < 0)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: number of cylinders not specified\n",
+		    name, current_line_number);
+	    status = 0;
+	}
+	if (dos_cyls == 0 || dos_cyls > 1024)
+	{
+	    fprintf(stderr,
+		    "%s: WARNING line %d: number of cylinders (%d) may be out-of-range\n\
+    (must be within 1-1024 for normal BIOS operation, unless the entire disk\n\
+    is dedicated to FreeBSD).\n",
+		    name, current_line_number, dos_cyls);
+	}
+
+	if (dos_heads < 0)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: number of heads not specified\n",
+		    name, current_line_number);
+	    status = 0;
+	}
+	else if (dos_heads < 1 || dos_heads > 256)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: number of heads must be within (1-256)\n",
+		    name, current_line_number);
+	    status = 0;
+	}
+
+	if (dos_sectors < 0)
+	{
+	    fprintf(stderr, "%s: ERROR line %d: number of sectors not specified\n",
+		    name, current_line_number);
+	    status = 0;
+	}
+	else if (dos_sectors < 1 || dos_sectors > 63)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: number of sectors must be within (1-63)\n",
+		    name, current_line_number);
+	    status = 0;
+	}
+
+	break;
+    }
+    return (status);
+}
+
+
+static int
+process_partition(command)
+    CMD		*command;
+{
+    int				status = 0, partition;
+    unsigned long		chunks, adj_size, max_end;
+    struct dos_partition	*partp;
+
+    while (1)
+    {
+	part_processed = 1;
+	if (command->n_args != 4)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: incorrect number of partition args\n",
+		    name, current_line_number);
+	    break;
+	}
+	partition = command->args[0].arg_val;
+	if (partition < 0 || partition > 3)
+	{
+	    fprintf(stderr, "%s: ERROR line %d: invalid partition number %d\n",
+		    name, current_line_number, partition);
+	    break;
+	}
+	partp = ((struct dos_partition *) &mboot.parts) + partition;
+	bzero((char *)partp, sizeof (struct dos_partition));
+	partp->dp_typ = command->args[1].arg_val;
+	partp->dp_start = command->args[2].arg_val;
+	partp->dp_size = command->args[3].arg_val;
+	max_end = partp->dp_start + partp->dp_size;
+
+	if (partp->dp_typ == 0)
+	{
+	    /*
+	     * Get out, the partition is marked as unused.
+	     */
+	    /*
+	     * Insure that it's unused.
+	     */
+	    bzero((char *)partp, sizeof (struct dos_partition));
+	    status = 1;
+	    break;
+	}
+
+	/*
+	 * Adjust start upwards, if necessary, to fall on an head boundary.
+	 */
+	if (partp->dp_start % dos_sectors != 0)
+	{
+	    adj_size =
+		(partp->dp_start / dos_sectors + 1) * dos_sectors;
+	    if (adj_size > max_end)
+	    {
+		/*
+		 * Can't go past end of partition
+		 */
+		fprintf(stderr,
+			"%s: ERROR line %d: unable to adjust start of partition %d to fall on\n\
+    a cylinder boundary.\n",
+			name, current_line_number, partition);
+		break;
+	    }
+	    fprintf(stderr,
+		    "%s: WARNING: adjusting start offset of partition '%d' from %d\n\
+    to %d, to round to an head boundary.\n",
+		    name, partition, partp->dp_start, adj_size);
+	    partp->dp_start = adj_size;
+	}
+
+	/*
+	 * Adjust size downwards, if necessary, to fall on a cylinder
+	 * boundary.
+	 */
+	chunks =
+	    ((partp->dp_start + partp->dp_size) / dos_cylsecs) * dos_cylsecs;
+	adj_size = chunks - partp->dp_start;
+	if (adj_size != partp->dp_size)
+	{
+	    fprintf(stderr,
+		    "%s: WARNING: adjusting size of partition '%d' from %d to %d,\n\
+    to round to a cylinder boundary.\n",
+		    name, partition, partp->dp_size, adj_size);
+	    if (chunks > 0)
+	    {
+		partp->dp_size = adj_size;
+	    }
+	    else
+	    {
+		partp->dp_size = 0;
+	    }
+	}
+	if (partp->dp_size < 1)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: size for partition '%d' is zero.\n",
+		    name, current_line_number, partition);
+	    break;
+	}
+
+	dos(partp->dp_start, partp->dp_size,
+	    &partp->dp_scyl, &partp->dp_ssect, &partp->dp_shd);
+	dos(partp->dp_start+partp->dp_size - 1, partp->dp_size,
+	    &partp->dp_ecyl, &partp->dp_esect, &partp->dp_ehd);
+	status = 1;
+	break;
+    }
+    return (status);
+}
+
+
+static int
+process_active(command)
+    CMD		*command;
+{
+    int				status = 0, partition, i;
+    struct dos_partition	*partp;
+
+    while (1)
+    {
+	active_processed = 1;
+	if (command->n_args != 1)
+	{
+	    fprintf(stderr,
+		    "%s: ERROR line %d: incorrect number of active args\n",
+		    name, current_line_number);
+	    status = 0;
+	    break;
+	}
+	partition = command->args[0].arg_val;
+	if (partition < 0 || partition > 3)
+	{
+	    fprintf(stderr, "%s: ERROR line %d: invalid partition number %d\n",
+		    name, current_line_number, partition);
+	    break;
+	}
+	/*
+	 * Reset active partition
+	 */
+	partp = ((struct dos_partition *) &mboot.parts);
+	for (i = 0; i < NDOSPART; i++)
+	    partp[i].dp_flag = 0;
+	partp[partition].dp_flag = ACTIVE;
+
+	status = 1;
+	break;
+    }
+    return (status);
+}
+
+
+static int
+process_line(line)
+    char	*line;
+{
+    CMD		command;
+    int		status = 1;
+
+    while (1)
+    {
+	parse_config_line(line, &command);
+	switch (command.cmd)
+	{
+	case 0:
+	    /*
+	     * Comment or blank line
+	     */
+	    break;
+	case 'g':
+	    /*
+	     * Set geometry
+	     */
+	    status = process_geometry(&command);
+	    break;
+	case 'p':
+	    status = process_partition(&command);
+	    break;
+	case 'a':
+	    status = process_active(&command);
+	    break;
+	default:
+	    status = 0;
+	    break;
+	}
+	break;
+    }
+    return (status);
+}
+
+
+static int
+read_config(config_file)
+    char *config_file;
+{
+    FILE	*fp = NULL;
+    int		status = 1;
+    char	buf[1010];
+
+    while (1)	/* dirty trick used to insure one exit point for this
+		   function */
+    {
+	if (strcmp(config_file, "-") != 0)
+	{
+	    /*
+	     * We're not reading from stdin
+	     */
+	    if ((fp = fopen(config_file, "r")) == NULL)
+	    {
+		status = 0;
+		break;
+	    }
+	}
+	else
+	{
+	    fp = stdin;
+	}
+	current_line_number = 0;
+	while (!feof(fp))
+	{
+	    if (fgets(buf, sizeof(buf), fp) == NULL)
+	    {
+		break;
+	    }
+	    ++current_line_number;
+	    status = process_line(buf);
+	    if (status == 0)
+	    {
+		break;
+	    }
+	}
+	break;
+    }
+    if (fp)
+    {
+	/*
+	 * It doesn't matter if we're reading from stdin, as we've reached EOF
+	 */
+	fclose(fp);
+    }
+    return (status);
+}
+
+
+static void
+reset_boot(void)
+{
+    int				i;
+    struct dos_partition	*partp;
+
+    init_boot();
+    for (i = 0; i < 4; ++i)
+    {
+	partp = ((struct dos_partition *) &mboot.parts) + i;
+	bzero((char *)partp, sizeof (struct dos_partition));
+    }
+}