Significant modifications to the SCSI controller support sections in both

files.  They are now both basically the same.  I also modified the driver
list in HARDWARE.TXT:  add the adw and isp drivers, and indicate that the
uha driver isn't yet supported under CAM.

This includes specific mention of all supported NCR and BusLogic models,
additional qualification of the supported DPT and QLogic models, and some
additions to the list of supported onboard Adaptec chips.

The hope is, of course, that this will lead to fewer questions like "is the
froboz SCSI controller supported?"

I think the formatting of the new entries looks okay, but someone with a
better eye for things like that might want to look at this.

4 files changed, 192 insertions, 162 deletions

diff --git a/release/texts/HARDWARE.TXT b/release/texts/HARDWARE.TXT
index 85221f4..3ab5f98 100644
--- a/release/texts/HARDWARE.TXT
+++ b/release/texts/HARDWARE.TXT
@@ -59,15 +59,17 @@ fdc0    3f0     6       2       n/a     Floppy disk controller
 wdc0    1f0     14      n/a     n/a     IDE/MFM/RLL disk controller
 wdc1    170     15      n/a     n/a     IDE/MFM/RLL disk controller
 
-adv0    n/a     n/a     n/a     n/a     AdvanSys ADP-9xx SCSI controller
+adv0    n/a     n/a     n/a     n/a     AdvanSys Narrow SCSI controllers
+adw0    n/a     n/a     n/a     n/a     AdvanSys Wide SCSI controllers
 ncr0    n/a     n/a     n/a     n/a     NCR PCI SCSI controller
 bt0     330     dyn     dyn     dyn     Buslogic SCSI controller
-uha0    330     dyn     6       dyn     Ultrastore 14f
+uha0*   330     dyn     6       dyn     Ultrastore 14f
 aha0    330     dyn     5       dyn     Adaptec 154x/1535 SCSI controller
 ahb0    dyn     dyn     dyn     dyn     Adaptec 174x SCSI controller
 ahc0    dyn     dyn     dyn     dyn     Adaptec 274x/284x/294x SCSI controller
 aic0*   340     11      dyn     dyn     Adaptec 152x/AIC-6360 SCSI
                                         controller
+isp0    dyn     dyn     dyn     dyn     QLogic 10X0, 2100 SCSI/FC controllers
 dpt     n/a     n/a     n/a     n/a     DPT RAID SCSI controllers.
 
 wt0     300     5       1       dyn     Wangtek and Archive QIC-02/QIC-36
@@ -326,44 +328,36 @@ ATA
 Adaptec 1535 ISA SCSI controllers
 Adaptec 154x series ISA SCSI controllers
 Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
-Adaptec 274X/284X/2940/3940 (Narrow/Wide/Twin) series ISA/EISA/PCI SCSI
-controllers.
-Adaptec AIC7850/AIC7895 on-board SCSI controllers.
-
-Support for the following controllers is rather weak:
-Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
-Adaptec 152x series ISA SCSI controllers
-Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
-and SoundBlaster SCSI cards.
-
-** Note: You cannot boot from the SoundBlaster cards as they have no
-   on-board BIOS, such being necessary for mapping the boot device into the
-   system BIOS I/O vectors.  They're perfectly usable for external tapes,
-   CDROMs, etc, however.  The same goes for any other AIC-6x60 based card
-   without a boot ROM.  Some systems DO have a boot ROM, which is generally
-   indicated by some sort of message when the system is first powered up
-   or reset, and in such cases you *will* also be able to boot from them.
-   Check your system/board documentation for more details.
-
-
-AdvanSys (Advanced Systems) ABP510/542/5150 ISA and ABP5140/5142 ISA PnP
-cards, ABP842/852 VLB cards, and ABP920/930/930U/930UA/950/960/960U/970/970U
-PCI cards.
-
-** Note:  The ADP510/5140/5150 boards were shipped by HP with the 4020i
-   CD-R drive but with NO BIOS, so these models cannot control boot devices
-   though they can be used for any secondary SCSI device.  Also note that the
-   ABP5140/5142 boards were rebadged by SIIG as the "SpeedMaster i540/i542"
-
-
-Buslogic 545S & 545c
-Buslogic 445S/445c VLB SCSI controller
-Buslogic 742A, 747S, 747c EISA SCSI controller.
-Buslogic 946c PCI SCSI controller
-Buslogic 956c PCI SCSI controller
-
-SymBios (formerly NCR) 53C810, 53C825, 53c860 and 53c875 PCI SCSI
-controllers:
+Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
+EISA/VLB/PCI SCSI controllers.
+Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
+
+AdvanSys SCSI controllers (all models).
+
+BusLogic MultiMaster controllers:
+
+[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
+
+BusLogic MultiMaster "W" Series Host Adapters:
+    BT-948, BT-958, BT-958D
+BusLogic MultiMaster "C" Series Host Adapters:
+    BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
+    BT-540CF
+BusLogic MultiMaster "S" Series Host Adapters:
+    BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
+    BT-542B
+BusLogic MultiMaster "A" Series Host Adapters:
+    BT-742A, BT-542B
+
+AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
+supported.
+
+DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
+SmartRAID IV SCSI/RAID controllers are supported.  The DPT SmartRAID/CACHE V
+is not yet supported.
+
+SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
+53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
         ASUS SC-200
         Data Technology DTC3130 (all variants)
         NCR cards (all)
@@ -371,34 +365,56 @@ controllers:
         Tekram DC390W, 390U and 390F
         Tyan S1365
 
-Tekram DC390 and DC390T controllers (maybe other cards based on the
-AMD 53c974 as well).
 
-NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. 
+QLogic 1020, 1040, 1040B and 2100 SCSI and Fibre Channel Adapters
 
 DTC 3290 EISA SCSI controller in 1542 emulation mode.
 
-UltraStor 14F, 24F and 34F SCSI controllers.
-
-Seagate ST01/02 SCSI controllers.
-
-Future Domain 8xx/950 series SCSI controllers.
-
-WD7000 SCSI controller.
-
 With all supported SCSI controllers, full support is provided for
-SCSI-I & SCSI-II peripherals, including Disks, tape drives (including
-DAT and 8mm Exabyte) and CD ROM drives.
+SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
+tape drives (including DAT and 8mm Exabyte), medium changers, processor
+target devices and CDROM drives.  WORM devices that support CDROM commands
+are supported for read-only access by the CDROM driver.  WORM/CD-R/CD-RW
+writing support is provided by cdrecord, which is in the ports tree.
 
 The following CD-ROM type systems are supported at this time:
 (cd)    SCSI interface (also includes ProAudio Spectrum and
         SoundBlaster SCSI)
-(mcd)   Mitsumi proprietary interface (all models, driver is rather stale)
 (matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
         interface (562/563 models)
 (scd)   Sony proprietary interface (all models)
-(wcd)   ATAPI IDE interface.
+(wcd)   ATAPI IDE interface
+
+The following drivers were supported under the old SCSI subsystem, but are
+NOT YET supported under the new CAM SCSI subsystem:
+
+  Tekram DC390 and DC390T controllers (maybe other cards based on the
+  AMD 53c974 as well).
+
+  NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. 
+
+  UltraStor 14F, 24F and 34F SCSI controllers.
+
+  Seagate ST01/02 SCSI controllers.
+
+  Future Domain 8xx/950 series SCSI controllers.
+
+  WD7000 SCSI controller.
+
+  Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
+  Adaptec 152x series ISA SCSI controllers
+  Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
+  and SoundBlaster SCSI cards.
+
+  [ Note:  There is work-in-progress to port the AIC-6260/6360 and
+    UltraStor drivers to the new CAM SCSI framework, but no estimates on
+    when or if they will be completed. ]
+
+Unmaintained drivers, they might or might not work for your hardware:
+
+  Floppy tape interface (Colorado/Mountain/Insight)
 
+  (mcd)   Mitsumi proprietary CD-ROM interface (all models)
 
 4.2.    Network cards
 ----    -------------
diff --git a/release/texts/RELNOTES.TXT b/release/texts/RELNOTES.TXT
index cdbeb1c..68b1997 100644
--- a/release/texts/RELNOTES.TXT
+++ b/release/texts/RELNOTES.TXT
@@ -113,22 +113,36 @@ ATA
 Adaptec 1535 ISA SCSI controllers
 Adaptec 154x series ISA SCSI controllers
 Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
-Adaptec 274X/284X/2920C/2940/2950/3940/3950 (Narrow/Wide/Twin) series
+Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
 EISA/VLB/PCI SCSI controllers.
-Adaptec AIC7850, AIC7880, AIC789x, on-board SCSI controllers.
+Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
 
 AdvanSys SCSI controllers (all models).
 
-Buslogic 545S & 545c
-Buslogic 445S/445c VLB SCSI controller
-Buslogic 742A, 747S, 747c EISA SCSI controller.
-Buslogic 946c PCI SCSI controller
-Buslogic 956c PCI SCSI controller
+BusLogic MultiMaster controllers:
 
-DPT SmartRAID III and IV SCSI/RAID controllers
+[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
 
-SymBios (formerly NCR) 53C810, 53C825, 53c860 and 53c875 PCI SCSI
-controllers:
+BusLogic MultiMaster "W" Series Host Adapters:
+    BT-948, BT-958, BT-958D
+BusLogic MultiMaster "C" Series Host Adapters:
+    BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
+    BT-540CF
+BusLogic MultiMaster "S" Series Host Adapters:
+    BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
+    BT-542B
+BusLogic MultiMaster "A" Series Host Adapters:
+    BT-742A, BT-542B
+
+AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
+supported.
+
+DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
+SmartRAID IV SCSI/RAID controllers are supported.  The DPT SmartRAID/CACHE V
+is not yet supported.
+
+SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
+53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
         ASUS SC-200
         Data Technology DTC3130 (all variants)
         NCR cards (all)
@@ -137,7 +151,7 @@ controllers:
         Tyan S1365
 
 
-QLogic SCSI and Fibre Channel controllers.
+QLogic 1020, 1040, 1040B and 2100 SCSI and Fibre Channel Adapters
 
 DTC 3290 EISA SCSI controller in 1542 emulation mode.
 
@@ -156,21 +170,6 @@ The following CD-ROM type systems are supported at this time:
 (scd)   Sony proprietary interface (all models)
 (wcd)   ATAPI IDE interface
 
-SCSI TAPE SUPPORT:
-
-  The CAM SCSI tape driver doesn't yet handle older (and many times broken)
-  tape drives very well.  If you've got an older SCSI-1 tape drive, like an
-  Exabyte 8200 or older QIC-type tape drive, it may not work properly with
-  the CAM tape driver.  This is obviously a known problem, and we're
-  working on it.
-
-  Newer tape drives that are mostly SCSI-2 compliant should work fine.
-  e.g., DAT (DDS-1, 2 and 3), DLT, and newer Exabyte 8mm drives should
-  work fine.
-
-  If you want to find out if your particular tape drive is supported, the
-  best way to find out is to try it!
-
 The following drivers were supported under the old SCSI subsystem, but are
 NOT YET supported under the new CAM SCSI subsystem:
 
diff --git a/release/texts/i386/HARDWARE.TXT b/release/texts/i386/HARDWARE.TXT
index 85221f4..3ab5f98 100644
--- a/release/texts/i386/HARDWARE.TXT
+++ b/release/texts/i386/HARDWARE.TXT
@@ -59,15 +59,17 @@ fdc0    3f0     6       2       n/a     Floppy disk controller
 wdc0    1f0     14      n/a     n/a     IDE/MFM/RLL disk controller
 wdc1    170     15      n/a     n/a     IDE/MFM/RLL disk controller
 
-adv0    n/a     n/a     n/a     n/a     AdvanSys ADP-9xx SCSI controller
+adv0    n/a     n/a     n/a     n/a     AdvanSys Narrow SCSI controllers
+adw0    n/a     n/a     n/a     n/a     AdvanSys Wide SCSI controllers
 ncr0    n/a     n/a     n/a     n/a     NCR PCI SCSI controller
 bt0     330     dyn     dyn     dyn     Buslogic SCSI controller
-uha0    330     dyn     6       dyn     Ultrastore 14f
+uha0*   330     dyn     6       dyn     Ultrastore 14f
 aha0    330     dyn     5       dyn     Adaptec 154x/1535 SCSI controller
 ahb0    dyn     dyn     dyn     dyn     Adaptec 174x SCSI controller
 ahc0    dyn     dyn     dyn     dyn     Adaptec 274x/284x/294x SCSI controller
 aic0*   340     11      dyn     dyn     Adaptec 152x/AIC-6360 SCSI
                                         controller
+isp0    dyn     dyn     dyn     dyn     QLogic 10X0, 2100 SCSI/FC controllers
 dpt     n/a     n/a     n/a     n/a     DPT RAID SCSI controllers.
 
 wt0     300     5       1       dyn     Wangtek and Archive QIC-02/QIC-36
@@ -326,44 +328,36 @@ ATA
 Adaptec 1535 ISA SCSI controllers
 Adaptec 154x series ISA SCSI controllers
 Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
-Adaptec 274X/284X/2940/3940 (Narrow/Wide/Twin) series ISA/EISA/PCI SCSI
-controllers.
-Adaptec AIC7850/AIC7895 on-board SCSI controllers.
-
-Support for the following controllers is rather weak:
-Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
-Adaptec 152x series ISA SCSI controllers
-Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
-and SoundBlaster SCSI cards.
-
-** Note: You cannot boot from the SoundBlaster cards as they have no
-   on-board BIOS, such being necessary for mapping the boot device into the
-   system BIOS I/O vectors.  They're perfectly usable for external tapes,
-   CDROMs, etc, however.  The same goes for any other AIC-6x60 based card
-   without a boot ROM.  Some systems DO have a boot ROM, which is generally
-   indicated by some sort of message when the system is first powered up
-   or reset, and in such cases you *will* also be able to boot from them.
-   Check your system/board documentation for more details.
-
-
-AdvanSys (Advanced Systems) ABP510/542/5150 ISA and ABP5140/5142 ISA PnP
-cards, ABP842/852 VLB cards, and ABP920/930/930U/930UA/950/960/960U/970/970U
-PCI cards.
-
-** Note:  The ADP510/5140/5150 boards were shipped by HP with the 4020i
-   CD-R drive but with NO BIOS, so these models cannot control boot devices
-   though they can be used for any secondary SCSI device.  Also note that the
-   ABP5140/5142 boards were rebadged by SIIG as the "SpeedMaster i540/i542"
-
-
-Buslogic 545S & 545c
-Buslogic 445S/445c VLB SCSI controller
-Buslogic 742A, 747S, 747c EISA SCSI controller.
-Buslogic 946c PCI SCSI controller
-Buslogic 956c PCI SCSI controller
-
-SymBios (formerly NCR) 53C810, 53C825, 53c860 and 53c875 PCI SCSI
-controllers:
+Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
+EISA/VLB/PCI SCSI controllers.
+Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
+
+AdvanSys SCSI controllers (all models).
+
+BusLogic MultiMaster controllers:
+
+[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
+
+BusLogic MultiMaster "W" Series Host Adapters:
+    BT-948, BT-958, BT-958D
+BusLogic MultiMaster "C" Series Host Adapters:
+    BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
+    BT-540CF
+BusLogic MultiMaster "S" Series Host Adapters:
+    BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
+    BT-542B
+BusLogic MultiMaster "A" Series Host Adapters:
+    BT-742A, BT-542B
+
+AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
+supported.
+
+DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
+SmartRAID IV SCSI/RAID controllers are supported.  The DPT SmartRAID/CACHE V
+is not yet supported.
+
+SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
+53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
         ASUS SC-200
         Data Technology DTC3130 (all variants)
         NCR cards (all)
@@ -371,34 +365,56 @@ controllers:
         Tekram DC390W, 390U and 390F
         Tyan S1365
 
-Tekram DC390 and DC390T controllers (maybe other cards based on the
-AMD 53c974 as well).
 
-NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. 
+QLogic 1020, 1040, 1040B and 2100 SCSI and Fibre Channel Adapters
 
 DTC 3290 EISA SCSI controller in 1542 emulation mode.
 
-UltraStor 14F, 24F and 34F SCSI controllers.
-
-Seagate ST01/02 SCSI controllers.
-
-Future Domain 8xx/950 series SCSI controllers.
-
-WD7000 SCSI controller.
-
 With all supported SCSI controllers, full support is provided for
-SCSI-I & SCSI-II peripherals, including Disks, tape drives (including
-DAT and 8mm Exabyte) and CD ROM drives.
+SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
+tape drives (including DAT and 8mm Exabyte), medium changers, processor
+target devices and CDROM drives.  WORM devices that support CDROM commands
+are supported for read-only access by the CDROM driver.  WORM/CD-R/CD-RW
+writing support is provided by cdrecord, which is in the ports tree.
 
 The following CD-ROM type systems are supported at this time:
 (cd)    SCSI interface (also includes ProAudio Spectrum and
         SoundBlaster SCSI)
-(mcd)   Mitsumi proprietary interface (all models, driver is rather stale)
 (matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
         interface (562/563 models)
 (scd)   Sony proprietary interface (all models)
-(wcd)   ATAPI IDE interface.
+(wcd)   ATAPI IDE interface
+
+The following drivers were supported under the old SCSI subsystem, but are
+NOT YET supported under the new CAM SCSI subsystem:
+
+  Tekram DC390 and DC390T controllers (maybe other cards based on the
+  AMD 53c974 as well).
+
+  NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. 
+
+  UltraStor 14F, 24F and 34F SCSI controllers.
+
+  Seagate ST01/02 SCSI controllers.
+
+  Future Domain 8xx/950 series SCSI controllers.
+
+  WD7000 SCSI controller.
+
+  Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
+  Adaptec 152x series ISA SCSI controllers
+  Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
+  and SoundBlaster SCSI cards.
+
+  [ Note:  There is work-in-progress to port the AIC-6260/6360 and
+    UltraStor drivers to the new CAM SCSI framework, but no estimates on
+    when or if they will be completed. ]
+
+Unmaintained drivers, they might or might not work for your hardware:
+
+  Floppy tape interface (Colorado/Mountain/Insight)
 
+  (mcd)   Mitsumi proprietary CD-ROM interface (all models)
 
 4.2.    Network cards
 ----    -------------
diff --git a/release/texts/i386/RELNOTES.TXT b/release/texts/i386/RELNOTES.TXT
index cdbeb1c..68b1997 100644
--- a/release/texts/i386/RELNOTES.TXT
+++ b/release/texts/i386/RELNOTES.TXT
@@ -113,22 +113,36 @@ ATA
 Adaptec 1535 ISA SCSI controllers
 Adaptec 154x series ISA SCSI controllers
 Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
-Adaptec 274X/284X/2920C/2940/2950/3940/3950 (Narrow/Wide/Twin) series
+Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
 EISA/VLB/PCI SCSI controllers.
-Adaptec AIC7850, AIC7880, AIC789x, on-board SCSI controllers.
+Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
 
 AdvanSys SCSI controllers (all models).
 
-Buslogic 545S & 545c
-Buslogic 445S/445c VLB SCSI controller
-Buslogic 742A, 747S, 747c EISA SCSI controller.
-Buslogic 946c PCI SCSI controller
-Buslogic 956c PCI SCSI controller
+BusLogic MultiMaster controllers:
 
-DPT SmartRAID III and IV SCSI/RAID controllers
+[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
 
-SymBios (formerly NCR) 53C810, 53C825, 53c860 and 53c875 PCI SCSI
-controllers:
+BusLogic MultiMaster "W" Series Host Adapters:
+    BT-948, BT-958, BT-958D
+BusLogic MultiMaster "C" Series Host Adapters:
+    BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
+    BT-540CF
+BusLogic MultiMaster "S" Series Host Adapters:
+    BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
+    BT-542B
+BusLogic MultiMaster "A" Series Host Adapters:
+    BT-742A, BT-542B
+
+AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
+supported.
+
+DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
+SmartRAID IV SCSI/RAID controllers are supported.  The DPT SmartRAID/CACHE V
+is not yet supported.
+
+SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
+53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
         ASUS SC-200
         Data Technology DTC3130 (all variants)
         NCR cards (all)
@@ -137,7 +151,7 @@ controllers:
         Tyan S1365
 
 
-QLogic SCSI and Fibre Channel controllers.
+QLogic 1020, 1040, 1040B and 2100 SCSI and Fibre Channel Adapters
 
 DTC 3290 EISA SCSI controller in 1542 emulation mode.
 
@@ -156,21 +170,6 @@ The following CD-ROM type systems are supported at this time:
 (scd)   Sony proprietary interface (all models)
 (wcd)   ATAPI IDE interface
 
-SCSI TAPE SUPPORT:
-
-  The CAM SCSI tape driver doesn't yet handle older (and many times broken)
-  tape drives very well.  If you've got an older SCSI-1 tape drive, like an
-  Exabyte 8200 or older QIC-type tape drive, it may not work properly with
-  the CAM tape driver.  This is obviously a known problem, and we're
-  working on it.
-
-  Newer tape drives that are mostly SCSI-2 compliant should work fine.
-  e.g., DAT (DDS-1, 2 and 3), DLT, and newer Exabyte 8mm drives should
-  work fine.
-
-  If you want to find out if your particular tape drive is supported, the
-  best way to find out is to try it!
-
 The following drivers were supported under the old SCSI subsystem, but are
 NOT YET supported under the new CAM SCSI subsystem: