Added zp0 and eg0 to interface menu. Dropped all the "at 0xfoo" comments.

1 files changed, 10 insertions, 8 deletions

diff --git a/release/scripts/netinst.sh b/release/scripts/netinst.sh
index 3fe2912..3587d8b 100644
--- a/release/scripts/netinst.sh
+++ b/release/scripts/netinst.sh
@@ -10,7 +10,7 @@
 # putting your name on top after doing something trivial like reindenting
 # it, just to make it look like you wrote it!).
 #
-# $Id: netinst.sh,v 1.6 1995/03/24 00:23:18 jkh Exp $
+# $Id: netinst.sh,v 1.7 1995/03/25 04:53:39 jkh Exp $
 
 if [ "${_NETINST_SH_LOADED_}" = "yes" ]; then
 	return 0
@@ -66,16 +66,18 @@ network_basic_setup()
 network_setup_ether()
 {
 	dialog  --title "Ethernet Interface Name" --menu \
-	"Please select the type of ethernet interface you have:\n" -1 -1 9 \
-	"ed0" "WD80x3, SMC, Novell NE[21]000 or 3C503 generic NIC at 0x280" \
-	"ed1" "Same as above, but at address 0x300 and IRQ 5" \
-	"ep0" "3COM 3C509 at address 0x300 and IRQ 10" \
+	"Please select the type of ethernet interface you have:\n" -1 -1 11 \
+	"ed0" "WD80x3, SMC, Novell NE[21]000 or 3C503 generic NIC" \
+	"ed1" "Same as above, but at a different address" \
+	"eg0" "3Com 3c505 (Etherlink/+)" \
+	"ep0" "3COM 3C509" \
 	"de0" "DEC PCI ethernet adapter (or compatible)" \
-	"ie0" "AT&T StarLan and EN100 family at 0x360 and IRQ 7" \
-	"is0" "Isolan 4141-0 or Isolink 4110 at 0x280 and IRQ 7" \
+	"ie0" "AT&T StarLan and EN100 family" \
+	"is0" "Isolan 4141-0 or Isolink 4110" \
 	"ix0" "Intel EtherExpress" \
 	"le0" "DEC Etherworks ethernet adapter" \
-	"ze0" "PCMCIA IBM or National card at 0x300 and IRQ 5" \
+	"ze0" "PCMCIA IBM or National card" \
+	"zp0" "3Com 3c589 PCMCIA card" \
 	  2> ${TMP}/menu.tmp.$$
 
 	RETVAL=$?