Whitespace police.

Submitted by:	cjc, ru

1 files changed, 41 insertions, 41 deletions

diff --git a/etc/defaults/rc.conf b/etc/defaults/rc.conf
index f0b6148..abfb5b2 100644
--- a/etc/defaults/rc.conf
+++ b/etc/defaults/rc.conf
@@ -1,7 +1,7 @@
 #!/bin/sh
 #
 
-# This is rc.conf - a file full of useful variables that you can set 
+# This is rc.conf - a file full of useful variables that you can set
 # to change the default startup behavior of your system.  You should
 # not edit this file!  Put any overrides into one of the ${rc_conf_files}
 # instead and you will be able to update these defaults later without
@@ -34,7 +34,7 @@ removable_interfaces=""	# Removable network interfaces for /etc/pccard_ether.
 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"	# startup script dirs.
 script_name_sep=" "	# Change if your startup scripts' names contain spaces
 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
-fsck_y_enable="NO" 	# Set to YES to do fsck -y if the initial preen fails.
+fsck_y_enable="NO"	# Set to YES to do fsck -y if the initial preen fails.
 background_fsck="YES"	# Attempt to run fsck in the background where possible.
 
 ##############################################################
@@ -50,16 +50,16 @@ firewall_enable="NO"		# Set to YES to enable firewall functionality
 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
 firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
 firewall_quiet="NO"		# Set to YES to suppress rule display
-firewall_logging="NO"           # Set to YES to enable events logging
+firewall_logging="NO"		# Set to YES to enable events logging
 firewall_flags=""		# Flags passed to ipfw when type is a file
 ip_portrange_first="NO"		# Set first dynamically allocated port
 ip_portrange_last="NO"		# Set last dynamically allocated port
 ipsec_enable="NO"		# Set to YES to run setkey on ipsec_file
 ipsec_file="/etc/ipsec.conf"	# Name of config file for setkey
 natd_program="/sbin/natd"	# path to natd, if you want a different one.
-natd_enable="NO"                # Enable natd (if firewall_enable == YES).
-natd_interface="fxp0"           # Public interface or IPaddress to use.
-natd_flags=""                   # Additional flags for natd.
+natd_enable="NO"		# Enable natd (if firewall_enable == YES).
+natd_interface="fxp0"		# Public interface or IPaddress to use.
+natd_flags=""			# Additional flags for natd.
 ipfilter_enable="NO"		# Set to YES to enable ipfilter functionality
 ipfilter_program="/sbin/ipf"	# where the ipfilter program lives
 ipfilter_rules="/etc/ipf.rules"	# rules definition file for ipfilter, see
@@ -72,7 +72,7 @@ ipnat_flags=""			# additional flags for ipnat
 ipmon_enable="NO"		# Set to YES for ipmon; needs ipfilter or ipnat
 ipmon_program="/sbin/ipmon"	# where the ipfilter monitor program lives
 ipmon_flags="-Ds"		# typically "-Ds" or "-D /var/log/ipflog"
-ipfs_enable="NO"		# Set to YES to enable saving and restoring 
+ipfs_enable="NO"		# Set to YES to enable saving and restoring
 				# of state tables at shutdown and boot
 ipfs_program="/sbin/ipfs"	# where the ipfs program lives
 ipfs_flags=""			# additional flags for ipfs
@@ -150,9 +150,9 @@ pppoed_enable="NO"		# Run the PPP over Ethernet daemon.
 pppoed_provider="*"		# Provider and ppp(8) config file entry.
 pppoed_flags="-P /var/run/pppoed.pid"	# Flags to pppoed (if enabled).
 pppoed_interface="fxp0"		# The interface that pppoed runs on.
-sshd_enable="NO"                # Enable sshd
+sshd_enable="NO"		# Enable sshd
 sshd_program="/usr/sbin/sshd"	# path to sshd, if you want a different one.
-sshd_flags=""                   # Additional flags for sshd.
+sshd_flags=""			# Additional flags for sshd.
 
 ### Network daemon (NFS) Need all portmap_enable="YES" ###
 amd_enable="NO"			# Run amd service with $amd_flags (or NO).
@@ -162,7 +162,7 @@ nfs_client_enable="NO"		# This host is an NFS client (or NO).
 nfs_access_cache="2"		# Client cache timeout in seconds
 nfs_server_enable="NO"		# This host is an NFS server (or NO).
 nfs_server_flags="-u -t -n 4"	# Flags to nfsd (if enabled).
-single_mountd_enable="NO"       # Run mountd only (or NO).
+single_mountd_enable="NO"	# Run mountd only (or NO).
 mountd_flags="-r"		# Flags to mountd (if NFS server enabled).
 weak_mountd_authentication="NO"	# Allow non-root mount requests to be served.
 nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
@@ -210,7 +210,7 @@ mrouted_flags=""		# Flags for multicast routing daemon.
 ipxgateway_enable="NO"		# Set to YES to enable IPX routing.
 ipxrouted_enable="NO"		# Set to YES to run the IPX routing daemon.
 ipxrouted_flags=""		# Flags for IPX routing daemon.
-arpproxy_all="NO"	       	# replaces obsolete kernel option ARP_PROXYALL.
+arpproxy_all="NO"		# replaces obsolete kernel option ARP_PROXYALL.
 forward_sourceroute="NO"	# do source routing (only if gateway_enable is set to "YES")
 accept_sourceroute="NO"		# accept source routed packets to us
 
@@ -311,9 +311,9 @@ blanktime="300"		# blank time (in seconds) or "NO" to turn it off.
 saver="NO"		# screen saver: Uses /modules/${saver}_saver.ko
 moused_enable="NO"	# Run the mouse daemon.
 moused_type="auto"	# See man page for rc.conf(5) for available settings.
-moused_port="/dev/psm0" # Set to your mouse port.
+moused_port="/dev/psm0"	# Set to your mouse port.
 moused_flags=""		# Any additional flags to moused.
-mousechar_start="NO"    # if 0xd0-0xd3 default range is occuped in your
+mousechar_start="NO"	# if 0xd0-0xd3 default range is occuped in your
 			# language code table, specify alternative range
 			# start like mousechar_start=3, see vidcontrol(1)
 allscreens_flags=""	# Set this vidcontrol mode for all virtual screens
@@ -325,8 +325,8 @@ allscreens_kbdflags=""	# Set this kbdcontrol mode for all virtual screens
 ##############################################################
 
 cron_enable="YES"	# Run the periodic job daemon.
-cron_program="/usr/sbin/cron" 	# Which cron executable to run (if enabled).
-cron_flags="" 		# Which options to pass to the cron daemon.
+cron_program="/usr/sbin/cron"	# Which cron executable to run (if enabled).
+cron_flags=""		# Which options to pass to the cron daemon.
 lpd_enable="NO"		# Run the line printer daemon.
 lpd_program="/usr/sbin/lpd"	# path to lpd, if you want a different one.
 lpd_flags=""		# Flags to lpd (if enabled).
@@ -338,8 +338,8 @@ sendmail_outbound_enable="YES"	# Dequeue stuck mail (YES/NO).
 sendmail_outbound_flags="-q30m" # Flags to sendmail (outbound only)
 dumpdev="NO"		# Device name to crashdump to (or NO).
 dumpdir="/var/crash"	# Directory where crash dumps are to be stored
-savecore_flags="" 	# Used if dumpdev is enabled above, and present.
-enable_quotas="NO"      # turn on quotas on startup (or NO).
+savecore_flags=""	# Used if dumpdev is enabled above, and present.
+enable_quotas="NO"	# turn on quotas on startup (or NO).
 check_quotas="YES"	# Check quotas on startup (or NO).
 accounting_enable="NO"	# Turn on process accounting (or NO).
 ibcs2_enable="NO"	# Ibcs2 (SCO) emulation loaded at startup (or NO).
@@ -354,19 +354,19 @@ ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
 			# shared library search paths
 ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
 			# a.out shared library search paths
-kern_securelevel_enable="NO"	# kernel security level (see init(8)), 
+kern_securelevel_enable="NO"	# kernel security level (see init(8)),
 kern_securelevel="-1"	# range: -1..3 ; `-1' is the most insecure
 update_motd="YES"	# update version info in /etc/motd (or NO)
-start_vinum="NO"       	# set to YES to start vinum
+start_vinum="NO"	# set to YES to start vinum
 unaligned_print="YES"	# print unaligned access warnings on the alpha (or NO).
-entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
+entropy_file="/entropy"	# Set to NO to disable caching entropy through reboots.
 			# /var/db/entropy is preferred if / is not available.
 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
-entropy_save_sz="2048" 	# Size of the entropy cache files.
-entropy_save_num="8" 	# Number of entropy cache files to save.
-harvest_interrupt="YES" # Entropy device harvests interrupt randomness
-harvest_ethernet="YES" 	# Entropy device harvests ethernet randomness
-harvest_p_to_p="YES" 	# Entropy device harvests point-to-point randomness
+entropy_save_sz="2048"	# Size of the entropy cache files.
+entropy_save_num="8"	# Number of entropy cache files to save.
+harvest_interrupt="YES"	# Entropy device harvests interrupt randomness
+harvest_ethernet="YES"	# Entropy device harvests ethernet randomness
+harvest_p_to_p="YES"	# Entropy device harvests point-to-point randomness
 
 ##############################################################
 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
@@ -374,20 +374,20 @@ harvest_p_to_p="YES" 	# Entropy device harvests point-to-point randomness
 ##############################################################
 
 if [ -z "${source_rc_confs_defined}" ]; then
-        source_rc_confs_defined=yes
-        source_rc_confs () {
-                local i sourced_files
-                for i in ${rc_conf_files}; do
-                        case ${sourced_files} in
-                        *:$i:*)
-                                ;;
-                        *)
-                                sourced_files="${sourced_files}:$i:"
-                                if [ -r $i ]; then
-                                        . $i
-                                fi
-                                ;;
-                        esac
-                done
-        }
+	source_rc_confs_defined=yes
+	source_rc_confs () {
+		local i sourced_files
+		for i in ${rc_conf_files}; do
+			case ${sourced_files} in
+			*:$i:*)
+				;;
+			*)
+				sourced_files="${sourced_files}:$i:"
+				if [ -r $i ]; then
+					. $i
+				fi
+				;;
+			esac
+		done
+	}
 fi