Merge clang, llvm, lld, lldb, compiler-rt and libc++ 5.0.0 release.

MFC r309126 (by emaste):

  Correct lld llvm-tblgen dependency file name

MFC r309169:

  Get rid of separate Subversion mergeinfo properties for llvm-dwarfdump
  and llvm-lto.  The mergeinfo confuses Subversion enormously, and these
  directories will just use the mergeinfo for llvm itself.

MFC r312765:

  Pull in r276136 from upstream llvm trunk (by Wei Mi):

    Use ValueOffsetPair to enhance value reuse during SCEV expansion.

    In D12090, the ExprValueMap was added to reuse existing value during
    SCEV expansion. However, const folding and sext/zext distribution can
    make the reuse still difficult.

    A simplified case is: suppose we know S1 expands to V1 in
    ExprValueMap, and
      S1 = S2 + C_a
      S3 = S2 + C_b
    where C_a and C_b are different SCEVConstants. Then we'd like to
    expand S3 as V1 - C_a + C_b instead of expanding S2 literally. It is
    helpful when S2 is a complex SCEV expr and S2 has no entry in
    ExprValueMap, which is usually caused by the fact that S3 is
    generated from S1 after const folding.

    In order to do that, we represent ExprValueMap as a mapping from SCEV
    to ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a}
    into the ExprValueMap when we create SCEV for V1. When S3 is
    expanded, it will first expand S2 to V1 - C_a because of S2->{V1,
    C_a} in the map, then expand S3 to V1 - C_a + C_b.

    Differential Revision: https://reviews.llvm.org/D21313

  This should fix assertion failures when building OpenCV >= 3.1.

  PR:		215649

MFC r312831:

  Revert r312765 for now, since it causes assertions when building
  lang/spidermonkey24.

  Reported by:	antoine
  PR:		215649

MFC r316511 (by jhb):

  Add an implementation of __ffssi2() derived from __ffsdi2().

  Newer versions of GCC include an __ffssi2() symbol in libgcc and the
  compiler can emit calls to it in generated code.  This is true for at
  least GCC 6.2 when compiling world for mips and mips64.

  Reviewed by:	jmallett, dim
  Sponsored by:	DARPA / AFRL
  Differential Revision:	https://reviews.freebsd.org/D10086

MFC r318601 (by adrian):

  [libcompiler-rt] add bswapdi2/bswapsi2

  This is required for mips gcc 6.3 userland to build/run.

  Reviewed by:	emaste, dim
  Approved by:	emaste
  Differential Revision:	https://reviews.freebsd.org/D10838

MFC r318884 (by emaste):

  lldb: map TRAP_CAP to a trace trap

  In the absense of a more specific handler for TRAP_CAP (generated by
  ENOTCAPABLE or ECAPMODE while in capability mode) treat it as a trace
  trap.

  Example usage (testing the bug in PR219173):

  % proccontrol -m trapcap lldb usr.bin/hexdump/obj/hexdump -- -Cv -s 1 /bin/ls
  ...
  (lldb) run
  Process 12980 launching
  Process 12980 launched: '.../usr.bin/hexdump/obj/hexdump' (x86_64)
  Process 12980 stopped
  * thread #1, stop reason = trace
      frame #0: 0x0000004b80c65f1a libc.so.7`__sys_lseek + 10
  ...

  In the future we should have LLDB control the trapcap procctl itself
  (as it does with ASLR), as well as report a specific stop reason.
  This change eliminates an assertion failure from LLDB for now.

MFC r319796:

  Remove a few unneeded files from libllvm, libclang and liblldb.

MFC r319885 (by emaste):

  lld: ELF: Fix ICF crash on absolute symbol relocations.

  If two sections contained relocations to absolute symbols with the same
  value we would crash when trying to access their sections. Add a check that
  both symbols point to sections before accessing their sections, and treat
  absolute symbols as equal if their values are equal.

  Obtained from:	LLD commit r292578

MFC r319918:

  Revert r319796 for now, it can cause undefined references when linking
  in some circumstances.

  Reported by:	Shawn Webb <shawn.webb@hardenedbsd.org>

MFC r319957 (by emaste):

  lld: Add armelf emulation mode

  Obtained from:	LLD r305375

MFC r321369:

  Upgrade our copies of clang, llvm, lld, lldb, compiler-rt and libc++ to
  5.0.0 (trunk r308421).  Upstream has branched for the 5.0.0 release,
  which should be in about a month.  Please report bugs and regressions,
  so we can get them into the release.

  Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
  support to build; see UPDATING for more information.

MFC r321420:

  Add a few more object files to liblldb, which should solve errors when
  linking the lldb executable in some cases.  In particular, when the
  -ffunction-sections -fdata-sections options are turned off, or
  ineffective.

  Reported by:	Shawn Webb, Mark Millard

MFC r321433:

  Cleanup stale Options.inc files from the previous libllvm build for
  clang 4.0.0.  Otherwise, these can get included before the two newly
  generated ones (which are different) for clang 5.0.0.

  Reported by:	Mark Millard

MFC r321439 (by bdrewery):

  Move llvm Options.inc hack from r321433 for NO_CLEAN to lib/clang/libllvm.

  The files are only ever generated to .OBJDIR, not to WORLDTMP (as a
  sysroot) and are only ever included from a compilation.  So using
  a beforebuild target here removes the file before the compilation
  tries to include it.

MFC r321664:

  Pull in r308891 from upstream llvm trunk (by Benjamin Kramer):

    [CodeGenPrepare] Cut off FindAllMemoryUses if there are too many uses.

    This avoids excessive compile time. The case I'm looking at is
    Function.cpp from an old version of LLVM that still had the giant
    memcmp string matcher in it. Before r308322 this compiled in about 2
    minutes, after it, clang takes infinite* time to compile it. With
    this patch we're at 5 min, which is still bad but this is a
    pathological case.

    The cut off at 20 uses was chosen by looking at other cut-offs in LLVM
    for user scanning. It's probably too high, but does the job and is
    very unlikely to regress anything.

    Fixes PR33900.

    * I'm impatient and aborted after 15 minutes, on the bug report it was
      killed after 2h.

  Pull in r308986 from upstream llvm trunk (by Simon Pilgrim):

    [X86][CGP] Reduce memcmp() expansion to 2 load pairs (PR33914)

    D35067/rL308322 attempted to support up to 4 load pairs for memcmp
    inlining which resulted in regressions for some optimized libc memcmp
    implementations (PR33914).

    Until we can match these more optimal cases, this patch reduces the
    memcmp expansion to a maximum of 2 load pairs (which matches what we
    do for -Os).

    This patch should be considered for the 5.0.0 release branch as well

    Differential Revision: https://reviews.llvm.org/D35830

  These fix a hang (or extremely long compile time) when building older
  LLVM ports.

  Reported by:    antoine
  PR:             219139

MFC r321719:

  Pull in r309503 from upstream clang trunk (by Richard Smith):

    PR33902: Invalidate line number cache when adding more text to
    existing buffer.

    This led to crashes as the line number cache would report a bogus
    line number for a line of code, and we'd try to find a nonexistent
    column within the line when printing diagnostics.

  This fixes an assertion when building the graphics/champlain port.

  Reported by:	antoine, kwm
  PR:		219139

MFC r321723:

  Upgrade our copies of clang, llvm, lld and lldb to r309439 from the
  upstream release_50 branch.  This is just after upstream's 5.0.0-rc1.

MFC r322320:

  Upgrade our copies of clang, llvm and libc++ to r310316 from the
  upstream release_50 branch.

MFC r322326 (by emaste):

  lldb: Make i386-*-freebsd expression work on JIT path

  * Enable i386 ABI creation for freebsd
  * Added an extra argument in ABISysV_i386::PrepareTrivialCall for mmap
    syscall
  * Unlike linux, the last argument of mmap is actually 64-bit(off_t).
    This requires us to push an additional word for the higher order bits.
  * Prior to this change, ktrace dump will show mmap failures due to
    invalid argument coming from the 6th mmap argument.

  Submitted by:	Karnajit Wangkhem
  Differential Revision:	https://reviews.llvm.org/D34776

MFC r322360 (by emaste):

  lldb: Report inferior signals as signals, not exceptions, on FreeBSD

  This is the FreeBSD equivalent of LLVM r238549.

  This serves 2 purposes:

  * LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
    SIGFPE the way it is suppose to be handled. Prior to this fix these
    signals will neither create a coredump, nor exit from the debugger
    or work for signal handling scenario.
  * eInvalidCrashReason need not report "unknown crash reason" if we have
    a valid si_signo

  llvm.org/pr23699

  Patch by Karnajit Wangkhem

  Differential Revision:  https://reviews.llvm.org/D35223

  Submitted by:	Karnajit Wangkhem
  Obtained from:	LLVM r310591

MFC r322474 (by emaste):

  lld: Add `-z muldefs` option.

  Obtained from:	LLVM r310757

MFC r322740:

  Upgrade our copies of clang, llvm, lld and libc++ to r311219 from the
  upstream release_50 branch.

MFC r322855:

  Upgrade our copies of clang, llvm, lldb and compiler-rt to r311606 from
  the upstream release_50 branch.

  As of this version, lib/msun's trig test should also work correctly
  again (see bug 220989 for more information).

  PR:		220989

MFC r323112:

  Upgrade our copies of clang, llvm, lldb and compiler-rt to r312293 from
  the upstream release_50 branch.  This corresponds to 5.0.0 rc4.

  As of this version, the cad/stepcode port should now compile in a more
  reasonable time on i386 (see bug 221836 for more information).

  PR:		221836

MFC r323245:

  Upgrade our copies of clang, llvm, lld, lldb, compiler-rt and libc++ to
  5.0.0 release (upstream r312559).

  Release notes for llvm, clang and lld will be available here soon:
  <http://releases.llvm.org/5.0.0/docs/ReleaseNotes.html>
  <http://releases.llvm.org/5.0.0/tools/clang/docs/ReleaseNotes.html>
  <http://releases.llvm.org/5.0.0/tools/lld/docs/ReleaseNotes.html>

  Relnotes:	yes

(cherry picked from commit 12cd91cf4c6b96a24427c0de5374916f2808d263)

1 files changed, 105 insertions, 118 deletions

diff --git a/contrib/llvm/tools/clang/lib/Basic/SourceManager.cpp b/contrib/llvm/tools/clang/lib/Basic/SourceManager.cpp
index 380ca37..f0b53b4 100644
--- a/contrib/llvm/tools/clang/lib/Basic/SourceManager.cpp
+++ b/contrib/llvm/tools/clang/lib/Basic/SourceManager.cpp
@@ -73,11 +73,11 @@ void ContentCache::replaceBuffer(llvm::MemoryBuffer *B, bool DoNotFree) {
     Buffer.setInt(DoNotFree? DoNotFreeFlag : 0);
     return;
   }
-  
+
   if (shouldFreeBuffer())
     delete Buffer.getPointer();
   Buffer.setPointer(B);
-  Buffer.setInt(DoNotFree? DoNotFreeFlag : 0);
+  Buffer.setInt((B && DoNotFree) ? DoNotFreeFlag : 0);
 }
 
 llvm::MemoryBuffer *ContentCache::getBuffer(DiagnosticsEngine &Diag,
@@ -183,48 +183,22 @@ unsigned LineTableInfo::getLineTableFilenameID(StringRef Name) {
   return IterBool.first->second;
 }
 
-/// AddLineNote - Add a line note to the line table that indicates that there
-/// is a \#line at the specified FID/Offset location which changes the presumed
-/// location to LineNo/FilenameID.
-void LineTableInfo::AddLineNote(FileID FID, unsigned Offset,
-                                unsigned LineNo, int FilenameID) {
-  std::vector<LineEntry> &Entries = LineEntries[FID];
-
-  assert((Entries.empty() || Entries.back().FileOffset < Offset) &&
-         "Adding line entries out of order!");
-
-  SrcMgr::CharacteristicKind Kind = SrcMgr::C_User;
-  unsigned IncludeOffset = 0;
-
-  if (!Entries.empty()) {
-    // If this is a '#line 4' after '#line 42 "foo.h"', make sure to remember
-    // that we are still in "foo.h".
-    if (FilenameID == -1)
-      FilenameID = Entries.back().FilenameID;
-
-    // If we are after a line marker that switched us to system header mode, or
-    // that set #include information, preserve it.
-    Kind = Entries.back().FileKind;
-    IncludeOffset = Entries.back().IncludeOffset;
-  }
-
-  Entries.push_back(LineEntry::get(Offset, LineNo, FilenameID, Kind,
-                                   IncludeOffset));
-}
-
-/// AddLineNote This is the same as the previous version of AddLineNote, but is
-/// used for GNU line markers.  If EntryExit is 0, then this doesn't change the
-/// presumed \#include stack.  If it is 1, this is a file entry, if it is 2 then
-/// this is a file exit.  FileKind specifies whether this is a system header or
-/// extern C system header.
-void LineTableInfo::AddLineNote(FileID FID, unsigned Offset,
-                                unsigned LineNo, int FilenameID,
-                                unsigned EntryExit,
+/// Add a line note to the line table that indicates that there is a \#line or
+/// GNU line marker at the specified FID/Offset location which changes the
+/// presumed location to LineNo/FilenameID. If EntryExit is 0, then this doesn't
+/// change the presumed \#include stack.  If it is 1, this is a file entry, if
+/// it is 2 then this is a file exit. FileKind specifies whether this is a
+/// system header or extern C system header.
+void LineTableInfo::AddLineNote(FileID FID, unsigned Offset, unsigned LineNo,
+                                int FilenameID, unsigned EntryExit,
                                 SrcMgr::CharacteristicKind FileKind) {
-  assert(FilenameID != -1 && "Unspecified filename should use other accessor");
-
   std::vector<LineEntry> &Entries = LineEntries[FID];
 
+  // An unspecified FilenameID means use the last filename if available, or the
+  // main source file otherwise.
+  if (FilenameID == -1 && !Entries.empty())
+    FilenameID = Entries.back().FilenameID;
+
   assert((Entries.empty() || Entries.back().FileOffset < Offset) &&
          "Adding line entries out of order!");
 
@@ -281,47 +255,20 @@ unsigned SourceManager::getLineTableFilenameID(StringRef Name) {
   return getLineTable().getLineTableFilenameID(Name);
 }
 
-
 /// AddLineNote - Add a line note to the line table for the FileID and offset
 /// specified by Loc.  If FilenameID is -1, it is considered to be
 /// unspecified.
 void SourceManager::AddLineNote(SourceLocation Loc, unsigned LineNo,
-                                int FilenameID) {
-  std::pair<FileID, unsigned> LocInfo = getDecomposedExpansionLoc(Loc);
-
-  bool Invalid = false;
-  const SLocEntry &Entry = getSLocEntry(LocInfo.first, &Invalid);
-  if (!Entry.isFile() || Invalid)
-    return;
-  
-  const SrcMgr::FileInfo &FileInfo = Entry.getFile();
-
-  // Remember that this file has #line directives now if it doesn't already.
-  const_cast<SrcMgr::FileInfo&>(FileInfo).setHasLineDirectives();
-
-  getLineTable().AddLineNote(LocInfo.first, LocInfo.second, LineNo, FilenameID);
-}
-
-/// AddLineNote - Add a GNU line marker to the line table.
-void SourceManager::AddLineNote(SourceLocation Loc, unsigned LineNo,
                                 int FilenameID, bool IsFileEntry,
-                                bool IsFileExit, bool IsSystemHeader,
-                                bool IsExternCHeader) {
-  // If there is no filename and no flags, this is treated just like a #line,
-  // which does not change the flags of the previous line marker.
-  if (FilenameID == -1) {
-    assert(!IsFileEntry && !IsFileExit && !IsSystemHeader && !IsExternCHeader &&
-           "Can't set flags without setting the filename!");
-    return AddLineNote(Loc, LineNo, FilenameID);
-  }
-
+                                bool IsFileExit,
+                                SrcMgr::CharacteristicKind FileKind) {
   std::pair<FileID, unsigned> LocInfo = getDecomposedExpansionLoc(Loc);
 
   bool Invalid = false;
   const SLocEntry &Entry = getSLocEntry(LocInfo.first, &Invalid);
   if (!Entry.isFile() || Invalid)
     return;
-  
+
   const SrcMgr::FileInfo &FileInfo = Entry.getFile();
 
   // Remember that this file has #line directives now if it doesn't already.
@@ -329,14 +276,6 @@ void SourceManager::AddLineNote(SourceLocation Loc, unsigned LineNo,
 
   (void) getLineTable();
 
-  SrcMgr::CharacteristicKind FileKind;
-  if (IsExternCHeader)
-    FileKind = SrcMgr::C_ExternCSystem;
-  else if (IsSystemHeader)
-    FileKind = SrcMgr::C_System;
-  else
-    FileKind = SrcMgr::C_User;
-
   unsigned EntryExit = 0;
   if (IsFileEntry)
     EntryExit = 1;
@@ -406,6 +345,34 @@ void SourceManager::clearIDTables() {
   createExpansionLoc(SourceLocation(),SourceLocation(),SourceLocation(), 1);
 }
 
+void SourceManager::initializeForReplay(const SourceManager &Old) {
+  assert(MainFileID.isInvalid() && "expected uninitialized SourceManager");
+
+  auto CloneContentCache = [&](const ContentCache *Cache) -> ContentCache * {
+    auto *Clone = new (ContentCacheAlloc.Allocate<ContentCache>()) ContentCache;
+    Clone->OrigEntry = Cache->OrigEntry;
+    Clone->ContentsEntry = Cache->ContentsEntry;
+    Clone->BufferOverridden = Cache->BufferOverridden;
+    Clone->IsSystemFile = Cache->IsSystemFile;
+    Clone->IsTransient = Cache->IsTransient;
+    Clone->replaceBuffer(Cache->getRawBuffer(), /*DoNotFree*/true);
+    return Clone;
+  };
+
+  // Ensure all SLocEntries are loaded from the external source.
+  for (unsigned I = 0, N = Old.LoadedSLocEntryTable.size(); I != N; ++I)
+    if (!Old.SLocEntryLoaded[I])
+      Old.loadSLocEntry(I, nullptr);
+
+  // Inherit any content cache data from the old source manager.
+  for (auto &FileInfo : Old.FileInfos) {
+    SrcMgr::ContentCache *&Slot = FileInfos[FileInfo.first];
+    if (Slot)
+      continue;
+    Slot = CloneContentCache(FileInfo.second);
+  }
+}
+
 /// getOrCreateContentCache - Create or return a cached ContentCache for the
 /// specified file.
 const ContentCache *
@@ -1136,6 +1103,7 @@ unsigned SourceManager::getColumnNumber(FileID FID, unsigned FilePos,
     return 1;
   }
 
+  const char *Buf = MemBuf->getBufferStart();
   // See if we just calculated the line number for this FilePos and can use
   // that to lookup the start of the line instead of searching for it.
   if (LastLineNoFileIDQuery == FID &&
@@ -1144,11 +1112,19 @@ unsigned SourceManager::getColumnNumber(FileID FID, unsigned FilePos,
     unsigned *SourceLineCache = LastLineNoContentCache->SourceLineCache;
     unsigned LineStart = SourceLineCache[LastLineNoResult - 1];
     unsigned LineEnd = SourceLineCache[LastLineNoResult];
-    if (FilePos >= LineStart && FilePos < LineEnd)
+    if (FilePos >= LineStart && FilePos < LineEnd) {
+      // LineEnd is the LineStart of the next line.
+      // A line ends with separator LF or CR+LF on Windows.
+      // FilePos might point to the last separator,
+      // but we need a column number at most 1 + the last column.
+      if (FilePos + 1 == LineEnd && FilePos > LineStart) {
+        if (Buf[FilePos - 1] == '\r' || Buf[FilePos - 1] == '\n')
+          --FilePos;
+      }
       return FilePos - LineStart + 1;
+    }
   }
 
-  const char *Buf = MemBuf->getBufferStart();
   unsigned LineStart = FilePos;
   while (LineStart && Buf[LineStart-1] != '\n' && Buf[LineStart-1] != '\r')
     --LineStart;
@@ -2042,9 +2018,51 @@ bool SourceManager::isBeforeInTranslationUnit(SourceLocation LHS,
   if (LOffs.first.isInvalid() || ROffs.first.isInvalid())
     return LOffs.first.isInvalid() && !ROffs.first.isInvalid();
 
+  std::pair<bool, bool> InSameTU = isInTheSameTranslationUnit(LOffs, ROffs);
+  if (InSameTU.first)
+    return InSameTU.second;
+
+  // If we arrived here, the location is either in a built-ins buffer or
+  // associated with global inline asm. PR5662 and PR22576 are examples.
+
+  StringRef LB = getBuffer(LOffs.first)->getBufferIdentifier();
+  StringRef RB = getBuffer(ROffs.first)->getBufferIdentifier();
+  bool LIsBuiltins = LB == "<built-in>";
+  bool RIsBuiltins = RB == "<built-in>";
+  // Sort built-in before non-built-in.
+  if (LIsBuiltins || RIsBuiltins) {
+    if (LIsBuiltins != RIsBuiltins)
+      return LIsBuiltins;
+    // Both are in built-in buffers, but from different files. We just claim that
+    // lower IDs come first.
+    return LOffs.first < ROffs.first;
+  }
+  bool LIsAsm = LB == "<inline asm>";
+  bool RIsAsm = RB == "<inline asm>";
+  // Sort assembler after built-ins, but before the rest.
+  if (LIsAsm || RIsAsm) {
+    if (LIsAsm != RIsAsm)
+      return RIsAsm;
+    assert(LOffs.first == ROffs.first);
+    return false;
+  }
+  bool LIsScratch = LB == "<scratch space>";
+  bool RIsScratch = RB == "<scratch space>";
+  // Sort scratch after inline asm, but before the rest.
+  if (LIsScratch || RIsScratch) {
+    if (LIsScratch != RIsScratch)
+      return LIsScratch;
+    return LOffs.second < ROffs.second;
+  }
+  llvm_unreachable("Unsortable locations found");
+}
+
+std::pair<bool, bool> SourceManager::isInTheSameTranslationUnit(
+    std::pair<FileID, unsigned> &LOffs,
+    std::pair<FileID, unsigned> &ROffs) const {
   // If the source locations are in the same file, just compare offsets.
   if (LOffs.first == ROffs.first)
-    return LOffs.second < ROffs.second;
+    return std::make_pair(true, LOffs.second < ROffs.second);
 
   // If we are comparing a source location with multiple locations in the same
   // file, we get a big win by caching the result.
@@ -2054,7 +2072,8 @@ bool SourceManager::isBeforeInTranslationUnit(SourceLocation LHS,
   // If we are comparing a source location with multiple locations in the same
   // file, we get a big win by caching the result.
   if (IsBeforeInTUCache.isCacheValid(LOffs.first, ROffs.first))
-    return IsBeforeInTUCache.getCachedResult(LOffs.second, ROffs.second);
+    return std::make_pair(
+        true, IsBeforeInTUCache.getCachedResult(LOffs.second, ROffs.second));
 
   // Okay, we missed in the cache, start updating the cache for this query.
   IsBeforeInTUCache.setQueryFIDs(LOffs.first, ROffs.first,
@@ -2084,44 +2103,12 @@ bool SourceManager::isBeforeInTranslationUnit(SourceLocation LHS,
   // locations within the common file and cache them.
   if (LOffs.first == ROffs.first) {
     IsBeforeInTUCache.setCommonLoc(LOffs.first, LOffs.second, ROffs.second);
-    return IsBeforeInTUCache.getCachedResult(LOffs.second, ROffs.second);
+    return std::make_pair(
+        true, IsBeforeInTUCache.getCachedResult(LOffs.second, ROffs.second));
   }
-
-  // If we arrived here, the location is either in a built-ins buffer or
-  // associated with global inline asm. PR5662 and PR22576 are examples.
-
   // Clear the lookup cache, it depends on a common location.
   IsBeforeInTUCache.clear();
-  StringRef LB = getBuffer(LOffs.first)->getBufferIdentifier();
-  StringRef RB = getBuffer(ROffs.first)->getBufferIdentifier();
-  bool LIsBuiltins = LB == "<built-in>";
-  bool RIsBuiltins = RB == "<built-in>";
-  // Sort built-in before non-built-in.
-  if (LIsBuiltins || RIsBuiltins) {
-    if (LIsBuiltins != RIsBuiltins)
-      return LIsBuiltins;
-    // Both are in built-in buffers, but from different files. We just claim that
-    // lower IDs come first.
-    return LOffs.first < ROffs.first;
-  }
-  bool LIsAsm = LB == "<inline asm>";
-  bool RIsAsm = RB == "<inline asm>";
-  // Sort assembler after built-ins, but before the rest.
-  if (LIsAsm || RIsAsm) {
-    if (LIsAsm != RIsAsm)
-      return RIsAsm;
-    assert(LOffs.first == ROffs.first);
-    return false;
-  }
-  bool LIsScratch = LB == "<scratch space>";
-  bool RIsScratch = RB == "<scratch space>";
-  // Sort scratch after inline asm, but before the rest.
-  if (LIsScratch || RIsScratch) {
-    if (LIsScratch != RIsScratch)
-      return LIsScratch;
-    return LOffs.second < ROffs.second;
-  }
-  llvm_unreachable("Unsortable locations found");
+  return std::make_pair(false, false);
 }
 
 void SourceManager::PrintStats() const {