Import of Binutils 2.10 snapshot.

1 files changed, 770 insertions, 0 deletions

diff --git a/contrib/binutils/gas/dwarf2dbg.c b/contrib/binutils/gas/dwarf2dbg.c
new file mode 100644
index 0000000..b83175a
--- /dev/null
+++ b/contrib/binutils/gas/dwarf2dbg.c
@@ -0,0 +1,770 @@
+/* dwarf2dbg.c - DWARF2 debug support
+   Copyright (C) 1999, 2000 Free Software Foundation, Inc.
+   Contributed by David Mosberger-Tang <davidm@hpl.hp.com>
+
+   This file is part of GAS, the GNU Assembler.
+
+   GAS is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   GAS is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with GAS; see the file COPYING.  If not, write to the Free
+   Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+   02111-1307, USA.  */
+
+/* Logical line numbers can be controlled by the compiler via the
+   following two directives:
+
+	.file FILENO "file.c"
+	.loc  FILENO LINENO [COLUMN]
+
+   FILENO is the filenumber.  */
+
+#include "ansidecl.h"
+
+#include "as.h"
+#include "dwarf2dbg.h"
+#include "subsegs.h"
+
+#include "elf/dwarf2.h"
+
+/* Since we can't generate the prolog until the body is complete, we
+   use three different subsegments for .debug_line: one holding the
+   prolog, one for the directory and filename info, and one for the
+   body ("statement program").  */
+#define DL_PROLOG	0
+#define DL_FILES	1
+#define DL_BODY		2
+
+/* First special line opcde - leave room for the standard opcodes.
+   Note: If you want to change this, you'll have to update the
+   "standard_opcode_lengths" table that is emitted below in
+   dwarf2_finish().  */
+#define DWARF2_LINE_OPCODE_BASE		10
+
+#ifndef DWARF2_LINE_BASE
+  /* Minimum line offset in a special line info. opcode.  This value
+     was chosen to give a reasonable range of values.  */
+# define DWARF2_LINE_BASE		-5
+#endif
+
+/* Range of line offsets in a special line info. opcode.  */
+#ifndef DWARF2_LINE_RANGE
+# define DWARF2_LINE_RANGE		14
+#endif
+
+#ifndef DWARF2_LINE_MIN_INSN_LENGTH
+  /* Define the architecture-dependent minimum instruction length (in
+     bytes).  This value should be rather too small than too big.  */
+# define DWARF2_LINE_MIN_INSN_LENGTH	4
+#endif
+
+/* Flag that indicates the initial value of the is_stmt_start flag.
+   In the present implementation, we do not mark any lines as
+   the beginning of a source statement, because that information
+   is not made available by the GCC front-end.  */
+#define	DWARF2_LINE_DEFAULT_IS_STMT	1
+
+/* Flag that indicates the initial value of the is_stmt_start flag.
+   In the present implementation, we do not mark any lines as
+   the beginning of a source statement, because that information
+   is not made available by the GCC front-end.  */
+#define	DWARF2_LINE_DEFAULT_IS_STMT	1
+
+/* Given a special op, return the line skip amount.  */
+#define SPECIAL_LINE(op) \
+	(((op) - DWARF2_LINE_OPCODE_BASE)%DWARF2_LINE_RANGE + DWARF2_LINE_BASE)
+
+/* Given a special op, return the address skip amount (in units of
+   DWARF2_LINE_MIN_INSN_LENGTH.  */
+#define SPECIAL_ADDR(op) (((op) - DWARF2_LINE_OPCODE_BASE)/DWARF2_LINE_RANGE)
+
+/* The maximum address skip amount that can be encoded with a special op.  */
+#define MAX_SPECIAL_ADDR_DELTA		SPECIAL_ADDR(255)
+
+#define INITIAL_STATE						\
+  /* Initialize as per DWARF2.0 standard.  */			\
+  0,					/* address */		\
+  1,					/* file */		\
+  1,					/* line */		\
+  0,					/* column */		\
+  DWARF2_LINE_DEFAULT_IS_STMT,		/* is_stmt */		\
+  0,					/* basic_block */	\
+  1					/* empty_sequence */
+
+static struct
+  {
+    /* state machine state as per DWARF2 manual: */
+    struct dwarf2_sm
+      {
+	addressT addr;
+	unsigned int filenum;
+	unsigned int line;
+	unsigned int column;
+	unsigned int
+	  is_stmt : 1,
+	  basic_block : 1,
+	  empty_sequence : 1;		/* current code sequence has no DWARF2 directives? */
+      }
+    sm;
+
+    unsigned int
+      any_dwarf2_directives : 1;	/* did we emit any DWARF2 line debug directives? */
+
+    fragS * frag;	/* frag that "addr" is relative to */
+    segT text_seg;	/* text segment "addr" is relative to */
+    subsegT text_subseg;
+    segT line_seg;	/* ".debug_line" segment */
+    int last_filename;	/* index of last filename that was used */
+    int num_filenames;	/* index of last filename in use */
+    int filename_len;	/* length of the filename array */
+    struct
+      {
+	int dir;	/* valid after gen_dir_list() only */
+	char *name; /* full path before gen_dir_list(), filename afterwards */
+      }
+    *file;
+
+    struct dwarf2_line_info current;	/* current source info: */
+
+    /* counters for statistical purposes: */
+    unsigned int num_line_entries;
+    unsigned int opcode_hist[256];	/* histogram of opcode frequencies */
+  }
+ls =
+  {
+    {
+      INITIAL_STATE
+    },
+    0,
+    0,
+    0,
+    0,
+    0,
+    0,
+    0,
+    0,
+    NULL,
+    { NULL, 0, 0, 0, 0 },
+    0,
+    {
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+    }
+  };
+
+
+/* Function prototypes: */
+static void out_uleb128 PARAMS ((addressT));
+static void out_sleb128 PARAMS ((offsetT));
+static void gen_addr_line PARAMS ((int, addressT));
+static void reset_state_machine PARAMS ((void));
+static void out_set_addr PARAMS ((addressT));
+static void out_end_sequence PARAMS ((void));
+static int get_filenum PARAMS ((int, char *));
+static void gen_dir_list PARAMS ((void));
+static void gen_file_list PARAMS ((void));
+static void print_stats PARAMS ((unsigned long));
+
+
+#define out_byte(byte)	FRAG_APPEND_1_CHAR(byte)
+#define out_opcode(opc)	(out_byte ((opc)), ++ls.opcode_hist[(opc) & 0xff])
+
+/* Output an unsigned "little-endian base 128" number.  */
+static void
+out_uleb128 (value)
+     addressT value;
+{
+  unsigned char byte, more = 0x80;
+
+  do
+    {
+      byte = value & 0x7f;
+      value >>= 7;
+      if (value == 0)
+	more = 0;
+      out_byte (more | byte);
+    }
+  while (more);
+}
+
+/* Output a signed "little-endian base 128" number.  */
+static void
+out_sleb128 (value)
+     offsetT value;
+{
+  unsigned char byte, more = 0x80;
+
+  do
+    {
+      byte = value & 0x7f;
+      value >>= 7;
+      if (((value == 0) && ((byte & 0x40) == 0))
+	  || ((value == -1) && ((byte & 0x40) != 0)))
+	more = 0;
+      out_byte (more | byte);
+    }
+  while (more);
+}
+
+/* Encode a pair of line and address skips as efficiently as possible.
+   Note that the line skip is signed, whereas the address skip is
+   unsigned.  */
+static void
+gen_addr_line (line_delta, addr_delta)
+     int line_delta;
+     addressT addr_delta;
+{
+  unsigned int tmp, opcode;
+
+  tmp = line_delta - DWARF2_LINE_BASE;
+
+  if (tmp >= DWARF2_LINE_RANGE)
+    {
+      out_opcode (DW_LNS_advance_line);
+      out_sleb128 (line_delta);
+      tmp = 0 - DWARF2_LINE_BASE;
+      line_delta = 0;
+    }
+
+  tmp += DWARF2_LINE_OPCODE_BASE;
+
+  /* try using a special opcode: */
+  opcode = tmp + addr_delta*DWARF2_LINE_RANGE;
+  if (opcode <= 255)
+    {
+      out_opcode (opcode);
+      return;
+    }
+
+  /* try using DW_LNS_const_add_pc followed by special op: */
+  opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA)*DWARF2_LINE_RANGE;
+  if (opcode <= 255)
+    {
+      out_opcode (DW_LNS_const_add_pc);
+      out_opcode (opcode);
+      return;
+    }
+
+  out_opcode (DW_LNS_advance_pc);
+  out_uleb128 (addr_delta);
+
+  if (line_delta)
+    out_opcode (tmp);		/* output line-delta */
+  else
+    out_opcode (DW_LNS_copy);	/* append new row with current info */
+}
+
+static void
+reset_state_machine ()
+{
+  static const struct dwarf2_sm initial_state = { INITIAL_STATE };
+
+  ls.sm = initial_state;
+}
+
+/* Set an absolute address (may results in a relocation entry): */
+static void
+out_set_addr (addr)
+     addressT addr;
+{
+  subsegT saved_subseg;
+  segT saved_seg;
+  expressionS expr;
+  symbolS *sym;
+  int bytes_per_address;
+
+  saved_seg = now_seg;
+  saved_subseg = now_subseg;
+
+  subseg_set (ls.text_seg, ls.text_subseg);
+  sym = symbol_new (".L0\001", now_seg, addr, frag_now);
+
+  subseg_set (saved_seg, saved_subseg);
+
+#ifdef BFD_ASSEMBLER
+  bytes_per_address = bfd_arch_bits_per_address (stdoutput) / 8;
+#else
+  /* FIXME.  */
+  bytes_per_address = 4;
+#endif
+
+  out_opcode (DW_LNS_extended_op);
+  out_uleb128 (bytes_per_address + 1);
+
+  out_opcode (DW_LNE_set_address);
+  expr.X_op = O_symbol;
+  expr.X_add_symbol = sym;
+  expr.X_add_number = 0;
+  emit_expr (&expr, bytes_per_address);
+}
+
+/* Emit DW_LNS_end_sequence and reset state machine.  Does not
+   preserve the current segment/sub-segment!  */
+static void
+out_end_sequence ()
+{
+  addressT addr, delta;
+  fragS *text_frag;
+
+  if (ls.text_seg)
+    {
+      subseg_set (ls.text_seg, ls.text_subseg);
+#ifdef md_current_text_addr
+      addr = md_current_text_addr ();
+#else
+      addr = frag_now_fix ();
+#endif
+      text_frag = frag_now;
+      subseg_set (ls.line_seg, DL_BODY);
+      if (text_frag != ls.frag)
+	{
+	  out_set_addr (addr);
+	  ls.sm.addr = addr;
+	  ls.frag = text_frag;
+	}
+      else
+	{
+	  delta = (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH;
+	  if (delta > 0)
+	    {
+	      /* Advance address without updating the line-debug
+		 matrix---the end_sequence entry is used only to tell
+		 the debugger the end of the sequence.*/
+	      out_opcode (DW_LNS_advance_pc);
+	      out_uleb128 (delta);
+	    }
+	}
+    }
+  else
+    subseg_set (ls.line_seg, DL_BODY);
+
+  out_opcode (DW_LNS_extended_op);
+  out_uleb128 (1);
+  out_byte (DW_LNE_end_sequence);
+
+  reset_state_machine ();
+}
+
+/* Look up a filenumber either by filename or by filenumber.  If both
+   a filenumber and a filename are specified, lookup by filename takes
+   precedence.  If the filename cannot be found, it is added to the
+   filetable and the filenumber for the new entry is returned.  */
+static int
+get_filenum (filenum, file)
+     int filenum;
+     char *file;
+{
+  int i, last = filenum - 1;
+  char char0 = file[0];
+
+  /* If filenum is out of range of the filename table, then try using the
+     table entry returned from the previous call.  */
+  if (last >= ls.num_filenames || last < 0)
+    last = ls.last_filename;
+
+  /* Do a quick check against the specified or previously used filenum.  */
+  if (ls.num_filenames > 0 && ls.file[last].name[0] == char0
+      && strcmp (ls.file[last].name + 1, file + 1) == 0)
+    return last + 1;
+
+  /* no match, fall back to simple linear scan: */
+  for (i = 0; i < ls.num_filenames; ++i)
+    {
+      if (ls.file[i].name[0] == char0
+	  && strcmp (ls.file[i].name + 1, file + 1) == 0)
+	{
+	  ls.last_filename = i;
+	  return i + 1;
+	}
+    }
+
+  /* no match: enter new filename */
+  if (ls.num_filenames >= ls.filename_len)
+    {
+      ls.filename_len += 13;
+      ls.file = xrealloc (ls.file, ls.filename_len * sizeof (ls.file[0]));
+    }
+  ls.file[ls.num_filenames].dir = 0;
+  ls.file[ls.num_filenames].name = file;
+  ls.last_filename = ls.num_filenames;
+  return ++ls.num_filenames;
+}
+
+/* Emit an entry in the line number table if the address or line has changed.
+   ADDR is relative to the current frag in the text section.  */
+
+void
+dwarf2_gen_line_info (addr, l)
+     addressT addr;
+     struct dwarf2_line_info *l;
+{
+  unsigned int filenum = l->filenum;
+  unsigned int any_output = 0;
+  subsegT saved_subseg;
+  segT saved_seg;
+  fragS *saved_frag;
+
+  if (flag_debug)
+    fprintf (stderr, "line: addr %lx file `%s' line %u col %u flags %x\n",
+	     (unsigned long) addr, l->filename, l->line, l->column, l->flags);
+
+  if (filenum > 0 && !l->filename)
+    {
+      if (filenum >= (unsigned int) ls.num_filenames)
+	{
+	  as_warn ("Encountered bad file number in line number debug info!");
+	  return;
+	}
+    }
+  else if (l->filename)
+    filenum = get_filenum (filenum, l->filename);
+  else
+    return;	/* no filename, no filnum => no play */
+
+  /* Must save these before the subseg_new call, as that call will change
+     them.  */
+  saved_seg = now_seg;
+  saved_subseg = now_subseg;
+  saved_frag = frag_now;
+
+  if (!ls.line_seg)
+    {
+#ifdef BFD_ASSEMBLER
+      symbolS *secsym;
+#endif
+
+      ls.line_seg = subseg_new (".debug_line", 0);
+
+#ifdef BFD_ASSEMBLER
+      bfd_set_section_flags (stdoutput, ls.line_seg, SEC_READONLY);
+
+      /* We're going to need this symbol.  */
+      secsym = symbol_find (".debug_line");
+      if (secsym != NULL)
+        symbol_set_bfdsym (secsym, ls.line_seg->symbol);
+      else
+        symbol_table_insert (section_symbol (ls.line_seg));
+#endif
+    }
+
+  subseg_set (ls.line_seg, DL_BODY);
+
+  if (ls.text_seg != saved_seg || ls.text_subseg != saved_subseg)
+    {
+      if (!ls.sm.empty_sequence)
+	{
+	  out_end_sequence ();		/* terminate previous sequence */
+	  ls.sm.empty_sequence = 1;
+	}
+      any_output = 1;
+      ls.text_seg = saved_seg;
+      ls.text_subseg = saved_subseg;
+      out_set_addr (addr);
+      ls.sm.addr = addr;
+      ls.frag = saved_frag;
+    }
+
+  if (ls.sm.filenum != filenum)
+    {
+      any_output = 1;
+      out_opcode (DW_LNS_set_file);
+      out_uleb128 (filenum);
+      ls.sm.filenum = filenum;
+    }
+
+  if (ls.sm.column != l->column)
+    {
+      any_output = 1;
+      out_opcode (DW_LNS_set_column);
+      out_uleb128 (l->column);
+      ls.sm.column = l->column;
+    }
+
+  if (((l->flags & DWARF2_FLAG_BEGIN_STMT) != 0) != ls.sm.is_stmt)
+    {
+      any_output = 1;
+      out_opcode (DW_LNS_negate_stmt);
+    }
+
+  if (l->flags & DWARF2_FLAG_BEGIN_BLOCK)
+    {
+      any_output = 1;
+      out_opcode (DW_LNS_set_basic_block);
+    }
+
+  if (ls.sm.line != l->line)
+    {
+      any_output = 1;
+      if (saved_frag != ls.frag)
+	{
+	  /* If a new frag got allocated (for whatever reason), then
+	     deal with it by generating a reference symbol.  Note: no
+	     end_sequence needs to be generated because the address did
+	     not really decrease (only the reference point changed).  */
+	  out_set_addr (addr);
+	  ls.sm.addr = addr;
+	  ls.frag = saved_frag;
+	}
+      gen_addr_line (l->line - ls.sm.line,
+		     (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH);
+      ls.sm.basic_block = 0;
+      ls.sm.line = l->line;
+      ls.sm.addr = addr;
+    }
+
+  subseg_set (saved_seg, saved_subseg);
+
+  ls.num_line_entries += any_output;
+  if (any_output)
+    ls.sm.empty_sequence = 0;
+}
+
+static void
+gen_dir_list ()
+{
+  char *str, *slash, *dir_list, *dp, *cp;
+  int i, j, num_dirs;
+
+  dir_list = frag_more (0);
+  num_dirs = 0;
+
+  for (i = 0; i < ls.num_filenames; ++i)
+    {
+      str = ls.file[i].name;
+      slash = strrchr (str, '/');
+      if (slash)
+	{
+	  *slash = '\0';
+	  for (j = 0, dp = dir_list; j < num_dirs; ++j)
+	    {
+	      if (strcmp (str, dp) == 0)
+		{
+		  ls.file[i].dir = j + 1;
+		  break;
+		}
+	      dp += strlen (dp);
+	    }
+	  if (j >= num_dirs)
+	    {
+	      /* didn't find this directory: append it to the list */
+	      size_t size = strlen (str) + 1;
+	      cp = frag_more (size);
+	      memcpy (cp, str, size);
+	      ls.file[i].dir = ++num_dirs;
+	    }
+	  *slash = '/';
+	  ls.file[i].name = slash + 1;
+	}
+    }
+  out_byte ('\0');	/* terminate directory list */
+}
+
+static void
+gen_file_list ()
+{
+  size_t size;
+  char *cp;
+  int i;
+
+  for (i = 0; i < ls.num_filenames; ++i)
+    {
+      size = strlen (ls.file[i].name) + 1;
+      cp = frag_more (size);
+      memcpy (cp, ls.file[i].name, size);
+
+      out_uleb128 (ls.file[i].dir);	/* directory number */
+      out_uleb128 (0);			/* last modification timestamp */
+      out_uleb128 (0);			/* filesize */
+    }
+  out_byte (0);		/* terminate filename list */
+}
+
+static void
+print_stats (total_size)
+     unsigned long total_size;
+{
+  static const char *opc_name[] =
+    {
+      "extended", "copy", "advance_pc", "advance_line", "set_file",
+      "set_column", "negate_stmt", "set_basic_block", "const_add_pc",
+      "fixed_advance_pc"
+    };
+  size_t i;
+  int j;
+
+  fprintf (stderr, "Average size: %g bytes/line\n",
+	   total_size / (double) ls.num_line_entries);
+
+  fprintf (stderr, "\nStandard opcode histogram:\n");
+
+  for (i = 0; i < sizeof (opc_name)/sizeof (opc_name[0]); ++i)
+    {
+      fprintf (stderr, "%s", opc_name[i]);
+      for (j = strlen (opc_name[i]); j < 16; ++j)
+	fprintf (stderr, " ");
+      fprintf (stderr, ": %u\n", ls.opcode_hist[i]);
+    }
+
+  fprintf (stderr, "\nSpecial opcodes:\naddr\t\t\t\tline skip\n");
+
+  fprintf (stderr, "skip: ");
+  for (j = DWARF2_LINE_BASE; j < DWARF2_LINE_BASE + DWARF2_LINE_RANGE; ++j)
+    fprintf (stderr, "%3d", j);
+  fprintf (stderr, "\n-----");
+
+  for (; i < 256; ++i)
+    {
+      j = SPECIAL_LINE (i);
+      if (j == DWARF2_LINE_BASE)
+	fprintf (stderr, "\n%4u: ",
+		 ((unsigned int)
+		  DWARF2_LINE_MIN_INSN_LENGTH * SPECIAL_ADDR (i)));
+      fprintf (stderr, " %2u", ls.opcode_hist[i]);
+    }
+  fprintf (stderr, "\n");
+}
+
+void
+dwarf2_finish ()
+{
+  addressT body_size, total_size, prolog_size;
+  subsegT saved_subseg;
+  segT saved_seg;
+  char *cp;
+
+  if (!ls.line_seg)
+    /* no .debug_line segment, no work to do... */
+    return;
+
+  saved_seg = now_seg;
+  saved_subseg = now_subseg;
+
+  if (!ls.sm.empty_sequence)
+    out_end_sequence ();
+  total_size = body_size = frag_now_fix ();
+
+  /* now generate the directory and file lists: */
+  subseg_set (ls.line_seg, DL_FILES);
+  gen_dir_list ();
+  gen_file_list ();
+  total_size += frag_now_fix ();
+
+  /* and now the header ("statement program prolog", in DWARF2 lingo...) */
+  subseg_set (ls.line_seg, DL_PROLOG);
+
+  cp = frag_more (15 + DWARF2_LINE_OPCODE_BASE - 1);
+
+  total_size += frag_now_fix ();
+  prolog_size = total_size - body_size - 10;
+
+# define STUFF(val,size)	md_number_to_chars (cp, val, size); cp += size;
+  STUFF (total_size - 4, 4);	/* length */
+  STUFF (2, 2);			/* version */
+  STUFF (prolog_size, 4);	/* prologue_length */
+  STUFF (DWARF2_LINE_MIN_INSN_LENGTH, 1);
+  STUFF (DWARF2_LINE_DEFAULT_IS_STMT, 1);
+  STUFF (DWARF2_LINE_BASE, 1);
+  STUFF (DWARF2_LINE_RANGE, 1);
+  STUFF (DWARF2_LINE_OPCODE_BASE, 1);
+
+  /* standard_opcode_lengths: */
+  STUFF (0, 1);			/* DW_LNS_copy */
+  STUFF (1, 1);			/* DW_LNS_advance_pc */
+  STUFF (1, 1);			/* DW_LNS_advance_line */
+  STUFF (1, 1);			/* DW_LNS_set_file */
+  STUFF (1, 1);			/* DW_LNS_set_column */
+  STUFF (0, 1);			/* DW_LNS_negate_stmt */
+  STUFF (0, 1);			/* DW_LNS_set_basic_block */
+  STUFF (0, 1);			/* DW_LNS_const_add_pc */
+  STUFF (1, 1);			/* DW_LNS_fixed_advance_pc */
+
+  subseg_set (saved_seg, saved_subseg);
+
+  if (flag_debug)
+    print_stats (total_size);
+}
+
+void
+dwarf2_directive_file (dummy)
+     int dummy ATTRIBUTE_UNUSED;
+{
+  int len;
+
+  /* Continue to accept a bare string and pass it off.  */
+  SKIP_WHITESPACE ();
+  if (*input_line_pointer == '"')
+    {
+      s_app_file (0);
+      return;
+    }
+
+  ls.any_dwarf2_directives = 1;
+
+  if (debug_type == DEBUG_NONE)
+    /* Automatically turn on DWARF2 debug info unless something else
+       has been selected.  */
+    debug_type = DEBUG_DWARF2;
+
+  ls.current.filenum = get_absolute_expression ();
+  ls.current.filename = demand_copy_C_string (&len);
+
+  demand_empty_rest_of_line ();
+}
+
+void
+dwarf2_directive_loc (dummy)
+     int dummy ATTRIBUTE_UNUSED;
+{
+  ls.any_dwarf2_directives = 1;
+
+  ls.current.filenum = get_absolute_expression ();
+  SKIP_WHITESPACE ();
+  ls.current.line = get_absolute_expression ();
+  SKIP_WHITESPACE ();
+  ls.current.column = get_absolute_expression ();
+  demand_empty_rest_of_line ();
+
+  ls.current.flags = DWARF2_FLAG_BEGIN_STMT;
+
+#ifndef NO_LISTING
+  if (listing)
+    listing_source_line (ls.current.line);
+#endif
+}
+
+void
+dwarf2_where (line)
+     struct dwarf2_line_info *line;
+{
+  if (ls.any_dwarf2_directives)
+    *line = ls.current;
+  else
+    {
+      as_where (&line->filename, &line->line);
+      line->filenum = 0;
+      line->column = 0;
+      line->flags = DWARF2_FLAG_BEGIN_STMT;
+    }
+}