summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorasami <asami@FreeBSD.org>1999-01-26 03:40:12 +0000
committerasami <asami@FreeBSD.org>1999-01-26 03:40:12 +0000
commitaf2672e9d7f1c097860b179e1f97a09eb2fdd992 (patch)
tree9073ac3823fb62217df01ef2e4c240506aff32e2
parentfe596a9ef89bac8b56cc2f63ad3c6c7df6ab1be5 (diff)
downloadFreeBSD-src-af2672e9d7f1c097860b179e1f97a09eb2fdd992.zip
FreeBSD-src-af2672e9d7f1c097860b179e1f97a09eb2fdd992.tar.gz
Move bsd.port.*mk to under ${PORTSDIR}/Mk (already repository copied).
There are only skeletons left here; they merely serve as a backup to include the real versions under ${PORTSDIR}/Mk while we update the ports tree to include them directly.
-rw-r--r--share/mk/bsd.port.mk2260
-rw-r--r--share/mk/bsd.port.post.mk4
-rw-r--r--share/mk/bsd.port.pre.mk4
-rw-r--r--share/mk/bsd.port.subdir.mk186
4 files changed, 8 insertions, 2446 deletions
diff --git a/share/mk/bsd.port.mk b/share/mk/bsd.port.mk
index 1b64286..f9c26d3 100644
--- a/share/mk/bsd.port.mk
+++ b/share/mk/bsd.port.mk
@@ -1,2258 +1,2 @@
-#-*- mode: Fundamental; tab-width: 4; -*-
-# ex:ts=4
-#
-# $Id: bsd.port.mk,v 1.301 1999/01/11 13:04:18 asami Exp $
-# $NetBSD: $
-#
-# bsd.port.mk - 940820 Jordan K. Hubbard.
-# This file is in the public domain.
-#
-# Please view me with 4 column tabs!
-
-# There are two different types of "maintainers" in the whole ports
-# framework concept. Maintainers of the bsd.port*.mk files
-# are listed below in the ${OPSYS}_MAINTAINER entries (this file
-# is used by multiple *BSD flavors). You should consult them directly
-# if you have any questions/suggestions regarding this file since only
-# they are allowed to modify the master copies in the CVS repository!
-
-FreeBSD_MAINTAINER= asami@FreeBSD.ORG
-OpenBSD_MAINTAINER= imp@OpenBSD.ORG
-
-# For each port, the MAINTAINER variable is what you should consult for
-# contact information on the person(s) to contact if you have questions/
-# suggestions about that specific port. By default (if no MAINTAINER
-# is listed), a port is maintained by the subscribers of the ports@freebsd.org
-# mailing list, and any correspondece should be directed there.
-#
-# MAINTAINER - The e-mail address of the contact person for this port
-# (default: ports@FreeBSD.ORG).
-#
-# These are meta-variables that are automatically set to the system
-# you are running on.
-#
-# ARCH - The architecture, as returned by "uname -m".
-# OPSYS - Portability clause. This is the operating system the
-# makefile is being used on. Automatically set to
-# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
-# OSREL - The release version (numeric) of the operating system.
-# OSVERSION - The value of __FreeBSD_version.
-# PORTOBJFORMAT - The object format ("aout" or "elf").
-#
-# These variables are used to identify your port.
-#
-# DISTNAME - Name of port or distribution.
-# PKGNAME - Name of the package file to create if the DISTNAME
-# isn't really relevant for the port/package
-# (default: ${DISTNAME}).
-# CATEGORIES - A list of descriptive categories into which this port falls.
-#
-# These variable describe how to fetch files required for building the port.
-#
-# DISTFILES - Name(s) of archive file(s) containing distribution
-# (default: ${DISTNAME}${EXTRACT_SUFX}). Set this to
-# an empty string if the port doesn't require it.
-# EXTRACT_SUFX - Suffix for archive names (default: .tar.gz). You
-# never have to set both DISTFILES and EXTRACT_SUFX.
-# MASTER_SITES - Primary location(s) for distribution files if not found
-# locally.
-# PATCHFILES - Name(s) of additional files that contain distribution
-# patches (default: none). make will look for them at
-# PATCH_SITES (see below). They will automatically be
-# uncompressed before patching if the names end with
-# ".gz" or ".Z".
-# PATCH_SITES - Primary location(s) for distribution patch files
-# if not found locally.
-# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
-# and ${PATCHFILES} will be put in this subdirectory of
-# ${DISTDIR} (see below). Also they will be fetched in
-# this subdirectory from FreeBSD mirror sites.
-# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
-# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
-# this variable to their names.
-# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
-# actually extract.
-#
-# These three variables are typically set in /etc/make.conf to indicate
-# the user's preferred location to fetch files from.
-#
-# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
-# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
-# (default:
-# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/)
-# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
-# value.
-# MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
-# MASTER_SITES.
-#
-# Set these if your port should not be built under certain circumstances.
-# These are string variables; you should set them to the reason why
-# they are necessary.
-#
-# RESTRICTED - Port is restricted (e.g., contains cryptography, etc.).
-# NO_CDROM - Port may not go on CDROM.
-# NO_PACKAGE - Port should not be packaged but distfiles can be put on
-# ftp sites and CDROMs.
-# BROKEN_ELF - Port doesn't build on ELF machines.
-# BROKEN - Port is broken.
-#
-# This variable is a boolean, so you don't need to set it to the reason.
-#
-# IS_INTERACTIVE - Set this if your port needs to interact with the user
-# during a build. User can then decide to skip this port by
-# setting ${BATCH}, or compiling only the interactive ports
-# by setting ${INTERACTIVE}.
-#
-# Set these if your port only makes sense to certain archetictures.
-# They are lists containing names for them (e.g., "alpha i386").
-#
-# ONLY_FOR_ARCHS - Only build ports if ${ARCH} matches one of these.
-# NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these.
-#
-# Use these if your port uses some of the common software packages.
-#
-# USE_GMAKE - Says that the port uses gmake.
-# GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
-# USE_AUTOCONF - Says that the port uses autoconf. Implies GNU_CONFIGURE.
-# AUTOCONF - Set to path of GNU autoconf if not in $PATH (default:
-# autoconf).
-# USE_PERL5 - Says that the port uses perl5 for building and running.
-# PERL5 - Set to full path of perl5, either in the system or
-# installed from a port.
-# PERL - Set to full path of perl5, either in the system or
-# installed from a port, but without the version number.
-# Use this if you need to replace "#!" lines in scripts.
-# PERL_VERSION - Full version of perl5 (see below for current value).
-# PERL_VER - Short version of perl5 (see below for current value).
-# PERL_ARCH - Directory name of architecture dependent libraries
-# (value: ${ARCH}-freebsd).
-# USE_IMAKE - Says that the port uses imake. Implies USE_X_PREFIX.
-# XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
-# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
-# target.
-# USE_X_PREFIX - Says that the port installs in ${X11BASE}. Implies USE_XLIB.
-# USE_XLIB - Says that the port uses X libraries.
-# USE_QT - Says that the port uses the latest version of qt toolkit.
-#
-# Dependency checking. Use these if your port requires another port
-# not in the list above.
-#
-# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
-# package depends in the "fetch" stage. "path" is the
-# name of a file if it starts with a slash (/), an
-# executable otherwise. make will test for the
-# existence (if it is a full pathname) or search for
-# it in your $PATH (if it is an executable) and go
-# into "dir" to do a "make all install" if it's not
-# found. If the third field ("target") exists, it will
-# be used instead of ${DEPENDS_TARGET}.
-# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
-# package depends to build (between the "extract" and
-# "build" stages, inclusive). The test done to
-# determine the existence of the dependency is the
-# same as FETCH_DEPENDS. If the third field ("target")
-# exists, it will be used instead of ${DEPENDS_TARGET}.
-# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
-# package depends to run. The test done to determine
-# the existence of the dependency is the same as
-# FETCH_DEPENDS. This will be checked during the
-# "install" stage and the name of the dependency will
-# be put into the package as well. If the third field
-# ("target") exists, it will be used instead of
-# ${DEPENDS_TARGET}.
-# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this
-# package depends on. "lib" is the name of a shared library.
-# make will use "ldconfig -r" to search for the
-# library. Note that lib can not contain regular expressions.
-# DEPENDS - A list of "dir[:target]" tuples of other ports this
-# package depends on being made first. Use this only for
-# things that don't fall into the above four categories.
-# If the second field ("target") exists, it will be used
-# instead of ${DEPENDS_TARGET}.
-# DEPENDS_TARGET - The default target to execute when a port is calling a
-# dependency (default: "install").
-#
-# Various directory definitions and variables to control them.
-# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
-#
-# X11BASE - Where X11 ports install things (default: /usr/X11R6).
-# LOCALBASE - Where non-X11 ports install things (default: /usr/local).
-# PREFIX - Where *this* port installs its files (default: ${X11BASE}
-# if USE_X_PREFIX is set, otherwise ${LOCALBASE}).
-# MASTERDIR - Where the port finds patches, package files, etc. Define
-# this is you have two or more ports that share most of the
-# files (default: ${.CURDIR}).
-# PORTSDIR - The root of the ports tree. Defaults:
-# FreeBSD/OpenBSD: /usr/ports
-# NetBSD: /usr/opt
-# DISTDIR - Where to get gzip'd, tarballed copies of original sources
-# (default: ${PORTSDIR}/distfiles).
-# PACKAGES - A top level directory where all packages go (rather than
-# going locally to each port). (default: ${PORTSDIR}/packages).
-# WRKDIRPREFIX - The place to root the temporary working directory
-# hierarchy (default: none).
-# WRKDIR - A temporary working directory that gets *clobbered* on clean
-# (default: ${WRKDIRPREFIX}${.CURDIR}/work).
-# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
-# unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
-# NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
-# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
-# PATCHDIR - A directory containing any additional patches you made
-# to port this software to FreeBSD (default:
-# ${MASTERDIR}/patches)
-# SCRIPTDIR - A directory containing any auxiliary scripts
-# (default: ${MASTERDIR}/scripts)
-# FILESDIR - A directory containing any miscellaneous additional files.
-# (default: ${MASTERDIR}/files)
-# PKGDIR - A direction containing any package creation files.
-# (default: ${MASTERDIR}/pkg)
-#
-# Motif support:
-#
-# REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be
-# built only if HAVE_MOTIF is set.
-# HAVE_MOTIF - If set, means system has Motif. Typically set in
-# /etc/make.conf.
-# MOTIF_STATIC - If set, link libXm statically; otherwise, link it
-# dynamically. Typically set in /etc/make.conf.
-# MOTIFLIB - Set automatically to appropriate value depending on
-# ${MOTIF_STATIC}. Substitute references to -lXm with
-# patches to make your port conform to our standards.
-# MOTIF_ONLY - If set, build Motif ports only. (Not much use except for
-# building packages.)
-#
-# Variables that serve as convenient "aliases" for your *-install targets.
-# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
-#
-# INSTALL_PROGRAM - A command to install binary executables.
-# INSTALL_SCRIPT - A command to install executable scripts.
-# INSTALL_DATA - A command to install sharable data.
-# INSTALL_MAN - A command to install manpages (doesn't compress).
-#
-# Set the following to specify all manpages that your port installs.
-# These manpages will be automatically listed in ${PLIST}. Depending
-# on the setting of NOMANCOMPRESS, the make rules will compress the
-# manpages for you.
-#
-# MAN<sect> - A list of manpages, categorized by section. For
-# example, if your port has "man/man1/foo.1" and
-# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
-# The available sections chars are "123456789LN".
-# MLINKS - A list of <target, source> tuples for creating links
-# for manpages. For example, "MLINKS= a.1 b.1 c.3 d.3"
-# will do an "ln -sf a.1 b.1" and "ln -sf c.3 and d.3" in
-# appropriate directories. (Use this even if the port
-# installs its own manpage links so they will show up
-# correctly in ${PLIST}.)
-# MANPREFIX - The directory prefix for ${MAN<sect>} and ${MLINKS}
-# (default: ${PREFIX}).
-# MAN<sect>PREFIX - If manual pages of some sections install in different
-# locations than others, use these (default: ${MANPREFIX}).
-# MANCOMPRESSED - This variable can take values "yes", "no" or
-# "maybe". "yes" means manpages are installed
-# compressed; "no" means they are not; "maybe" means
-# it changes depending on the value of
-# NOMANCOMPRESS. The default is "yes" if USE_IMAKE
-# is set and NO_INSTALL_MANPAGES is not set, and
-# "no" otherwise.
-#
-# Default targets and their behaviors:
-#
-# fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
-# into ${DISTDIR} as necessary.
-# fetch-list - Show list of files that would be retrieved by fetch
-# extract - Unpacks ${DISTFILES} into ${WRKDIR}.
-# patch - Apply any provided patches to the source.
-# configure - Runs either GNU configure, one or more local configure
-# scripts or nothing, depending on what's available.
-# build - Actually compile the sources.
-# install - Install the results of a build.
-# reinstall - Install the results of a build, ignoring "already installed"
-# flag.
-# deinstall - Remove the installation.
-# package - Create a package from an _installed_ port.
-# describe - Try to generate a one-line description for each port for
-# use in INDEX files and the like.
-# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
-# give incorrect results if multiple patches deal with
-# the same file.
-# checksum - Use files/md5 to ensure that your distfiles are valid.
-# makesum - Generate files/md5 (only do this for your own ports!).
-#
-# Default sequence for "all" is: fetch checksum extract patch configure build
-#
-# Please read the comments in the targets section below, you
-# should be able to use the pre-* or post-* targets/scripts
-# (which are available for every stage except checksum) or
-# override the do-* targets to do pretty much anything you want.
-#
-# NEVER override the "regular" targets unless you want to open
-# a major can of worms.
-#
-# Set these variables if your port doesn't need some of the steps.
-# Note that there are no NO_PATCH or NO_CONFIGURE variables becuase
-# those steps are empty by default. NO_EXTRACT is not allowed anymore
-# since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user
-# variable and is not to be set in a port's Makefile. See above for NO_PACKAGE.
-#
-# NO_BUILD - Use a dummy (do-nothing) build target.
-# NO_INSTALL - Use a dummy (do-nothing) install target.
-#
-# Here are some variables used in various stages.
-#
-# For fetch:
-#
-# FETCH_CMD - Full path to ftp/http fetch command if not in $PATH
-# (default: /usr/bin/fetch).
-# FETCH_BEFORE_ARGS -
-# Arguments to ${FETCH_CMD} before filename (default: none).
-# FETCH_AFTER_ARGS -
-# Arguments to ${FETCH_CMD} following filename (default: none).
-#
-# For extract:
-#
-# EXTRACT_CMD - Command for extracting archive (default: tar).
-# EXTRACT_BEFORE_ARGS -
-# Arguments to ${EXTRACT_CMD} before filename
-# (default: -xzf).
-# EXTRACT_AFTER_ARGS -
-# Arguments to ${EXTRACT_CMD} following filename
-# (default: none).
-#
-# For configure:
-#
-# HAS_CONFIGURE - Says that the port has its own configure script. The
-# configure stage will not do anything if this is not set.
-# GNU_CONFIGURE - Set if you are using GNU configure (optional). Implies
-# HAS_CONFIGURE.
-# CONFIGURE_SCRIPT - Name of configure script (defaults: configure).
-# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
-# CONFIGURE_ENV - Pass these env (shell-like) to configure if
-# ${HAS_CONFIGURE} is set.
-#
-# For build and install:
-#
-# MAKE_ENV - Additional environment vars passed to sub-make in build
-# and install stages (default: see below).
-# MAKE_ARGS - Any extra arguments to sub-make in build and install
-# stages (default: none).
-#
-# For install:
-#
-# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
-# the "install" target.
-# MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
-# if USE_X_PREFIX is set, /etc/mtree/BSD.local.dist
-# otherwise.)
-# PLIST - Name of the `packing list' file (default: ${PKGDIR}/PLIST).
-# Change this to ${WRKDIR}/PLIST or something if you
-# need to write to it. (It is not a good idea for a port
-# to write to any file outside ${WRKDIR} during a normal
-# build.)
-# TMPPLIST - Name of the `packing list' file after processing
-# (default: ${WRKDIR}/.PLIST.mktmp).
-# PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST}
-# (default: see below).
-#
-# Note that the install target will automatically add manpages (see
-# above) and also substitute special sequences of characters (delimited
-# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For
-# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
-# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
-# ${TMPPLIST} is generated between the do-install and post-install
-# stages. If you are generating the packing list on-the-fly, make
-# sure it's generated by the end of do-install!
-#
-# For package:
-#
-# NO_LATEST_LINK - Do not install the "Latest" link for package. Define this
-# if this port is a beta version of another stable port
-# which is also in the tree.
-#
-# This is used in all stages:
-#
-# SCRIPTS_ENV - Additional environment vars passed to scripts in
-# ${SCRIPTDIR} executed by bsd.port.mk (default: see below).
-#
-# Finally, variables to change if you want a special behavior. These
-# are for debugging purposes. Don't set them in your Makefile.
-#
-# ECHO_MSG - Used to print all the '===>' style prompts - override this
-# to turn them off (default: /bin/echo).
-# PATCH_DEBUG - If set, print out more information about the patches as
-# it attempts to apply them.
-# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
-# NO_PKG_REGISTER - Don't register a port install as a package.
-# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
-# registration information in ${PKG_DBDIR}/${PKGNAME}.
-# NO_DEPENDS - Don't verify build of dependencies.
-# NO_CHECKSUM - Don't verify the checksum. Typically used when
-# when you noticed the distfile you just fetched has
-# a different checksum and you intend to verify if
-# the port still works with it.
-
-# Start of pre-makefile section.
-.if !defined(AFTERPORTMK)
-
-# Get the architecture
-.if !defined(ARCH)
-ARCH!= /usr/bin/uname -m
-.endif
-
-# Get the operating system type
-.if !defined(OPSYS)
-OPSYS!= /usr/bin/uname -s
-.endif
-
-# Get the operating system revision
-.if !defined(OSREL)
-OSREL!= /usr/bin/uname -r | sed -e 's/[-(].*//'
-.endif
-
-# Get __FreeBSD_version
-.if !defined(OSVERSION)
-.if exists(/sbin/sysctl)
-OSVERSION!= /sbin/sysctl -n kern.osreldate
-.else
-OSVERSION!= /usr/sbin/sysctl -n kern.osreldate
-.endif
-.endif
-
-# Get the object format.
-.if !defined(PORTOBJFORMAT)
-PORTOBJFORMAT!= test -x /usr/bin/objformat && /usr/bin/objformat || echo aout
-.endif
-
-MASTERDIR?= ${.CURDIR}
-
-# If they exist, include Makefile.inc, then architecture/operating
-# system specific Makefiles, then local Makefile.local.
-
-.if exists(${MASTERDIR}/../Makefile.inc)
-.include "${MASTERDIR}/../Makefile.inc"
-.endif
-
-.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS})
-.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}"
-.elif exists(${MASTERDIR}/Makefile.${OPSYS})
-.include "${MASTERDIR}/Makefile.${OPSYS}"
-.elif exists(${MASTERDIR}/Makefile.${ARCH})
-.include "${MASTERDIR}/Makefile.${ARCH}"
-.endif
-
-.if exists(${MASTERDIR}/Makefile.local)
-.include "${MASTERDIR}/Makefile.local"
-.endif
-
-# These need to be absolute since we don't know how deep in the ports
-# tree we are and thus can't go relative. They can, of course, be overridden
-# by individual Makefiles or local system make configuration.
-.if (${OPSYS} == "NetBSD")
-PORTSDIR?= /usr/opt
-.else
-PORTSDIR?= /usr/ports
-.endif
-LOCALBASE?= ${DESTDIR}/usr/local
-X11BASE?= ${DESTDIR}/usr/X11R6
-DISTDIR?= ${PORTSDIR}/distfiles
-_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
-EXTRACT_SUFX?= .tar.gz
-PACKAGES?= ${PORTSDIR}/packages
-TEMPLATES?= ${PORTSDIR}/templates
-
-.if exists(${MASTERDIR}/patches.${ARCH}-${OPSYS})
-PATCHDIR?= ${MASTERDIR}/patches.${ARCH}-${OPSYS}
-.elif exists(${MASTERDIR}/patches.${OPSYS})
-PATCHDIR?= ${MASTERDIR}/patches.${OPSYS}
-.elif exists(${MASTERDIR}/patches.${ARCH})
-PATCHDIR?= ${MASTERDIR}/patches.${ARCH}
-.else
-PATCHDIR?= ${MASTERDIR}/patches
-.endif
-
-.if exists(${MASTERDIR}/scripts.${ARCH}-${OPSYS})
-SCRIPTDIR?= ${MASTERDIR}/scripts.${ARCH}-${OPSYS}
-.elif exists(${MASTERDIR}/scripts.${OPSYS})
-SCRIPTDIR?= ${MASTERDIR}/scripts.${OPSYS}
-.elif exists(${MASTERDIR}/scripts.${ARCH})
-SCRIPTDIR?= ${MASTERDIR}/scripts.${ARCH}
-.else
-SCRIPTDIR?= ${MASTERDIR}/scripts
-.endif
-
-.if exists(${MASTERDIR}/files.${ARCH}-${OPSYS})
-FILESDIR?= ${MASTERDIR}/files.${ARCH}-${OPSYS}
-.elif exists(${MASTERDIR}/files.${OPSYS})
-FILESDIR?= ${MASTERDIR}/files.${OPSYS}
-.elif exists(${MASTERDIR}/files.${ARCH})
-FILESDIR?= ${MASTERDIR}/files.${ARCH}
-.else
-FILESDIR?= ${MASTERDIR}/files
-.endif
-
-.if exists(${MASTERDIR}/pkg.${ARCH}-${OPSYS})
-PKGDIR?= ${MASTERDIR}/pkg.${ARCH}-${OPSYS}
-.elif exists(${MASTERDIR}/pkg.${OPSYS})
-PKGDIR?= ${MASTERDIR}/pkg.${OPSYS}
-.elif exists(${MASTERDIR}/pkg.${ARCH})
-PKGDIR?= ${MASTERDIR}/pkg.${ARCH}
-.else
-PKGDIR?= ${MASTERDIR}/pkg
-.endif
-
-.if defined(USE_IMAKE)
-USE_X_PREFIX= yes
-.endif
-.if defined(USE_X_PREFIX)
-USE_XLIB= yes
-.endif
-.if defined(USE_X_PREFIX)
-PREFIX?= ${X11BASE}
-.else
-PREFIX?= ${LOCALBASE}
-.endif
-
-.endif
-# End of pre-makefile section.
-
-# Start of post-makefile section.
-.if !defined(BEFOREPORTMK)
-
-WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work
-.if defined(NO_WRKSUBDIR)
-WRKSRC?= ${WRKDIR}
-.else
-WRKSRC?= ${WRKDIR}/${DISTNAME}
-.endif
-
-PLIST_SUB+= OSREL=${OSREL}
-
-CONFIGURE_ENV+= PORTOBJFORMAT=${PORTOBJFORMAT}
-SCRIPTS_ENV+= PORTOBJFORMAT=${PORTOBJFORMAT}
-MAKE_ENV+= PORTOBJFORMAT=${PORTOBJFORMAT}
-PLIST_SUB+= PORTOBJFORMAT=${PORTOBJFORMAT}
-
-.if defined(MANCOMPRESSED)
-.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \
- ${MANCOMPRESSED} != maybe
-.BEGIN:
- @${ECHO_MSG} "Error: Value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"".
- @${FALSE}
-.endif
-.endif
-
-.if defined(USE_IMAKE) && ${OPSYS} != OpenBSD && !defined(NO_INSTALL_MANPAGES)
-MANCOMPRESSED?= yes
-.else
-MANCOMPRESSED?= no
-.endif
-
-.if defined(USE_GMAKE)
-BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
-.endif
-.if defined(USE_AUTOCONF)
-GNU_CONFIGURE= yes
-BUILD_DEPENDS+= autoconf:${PORTSDIR}/devel/autoconf
-.endif
-
-.if defined(REQUIRES_MOTIF) && defined(PARALLEL_PACKAGE_BUILD)
-BUILD_DEPENDS+= ${X11BASE}/lib/libXm.a:${PORTSDIR}/x11-toolkits/Motif-dummy
-.endif
-
-PERL_VERSION= 5.00502
-PERL_VER= 5.005
-PERL_ARCH= ${ARCH}-freebsd
-PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
- PERL_VER=${PERL_VER} \
- PERL_ARCH=${PERL_ARCH}
-
-.if exists(/usr/bin/perl5) && ${OSVERSION} >= 300000
-# 3.0-current after perl5 import
-.if !exists(/usr/bin/perl${PERL_VERSION}) && defined(USE_PERL5)
-.BEGIN:
- @${ECHO_MSG} "Error: you don't have the right version of perl in /usr/bin."
- @${FALSE}
-.endif
-PERL5= /usr/bin/perl${PERL_VERSION}
-PERL= /usr/bin/perl
-.else
-PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION}
-PERL= ${LOCALBASE}/bin/perl
-.if defined(USE_PERL5)
-BUILD_DEPENDS+= perl${PERL_VERSION}:${PORTSDIR}/lang/perl5
-RUN_DEPENDS+= perl${PERL_VERSION}:${PORTSDIR}/lang/perl5
-.endif
-.endif
-
-.if defined(USE_XLIB)
-LIB_DEPENDS+= X11.6:${PORTSDIR}/x11/XFree86
-.endif
-
-.if defined(USE_QT)
-LIB_DEPENDS+= qt.2:${PORTSDIR}/x11-toolkits/qt142
-.endif
-
-.if exists(${PORTSDIR}/../Makefile.inc)
-.include "${PORTSDIR}/../Makefile.inc"
-.endif
-
-# Don't change these!!! These names are built into the _TARGET_USE macro,
-# there is no way to refer to them cleanly from within the macro AFAIK.
-EXTRACT_COOKIE?= ${WRKDIR}/.extract_done
-CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done
-INSTALL_COOKIE?= ${WRKDIR}/.install_done
-BUILD_COOKIE?= ${WRKDIR}/.build_done
-PATCH_COOKIE?= ${WRKDIR}/.patch_done
-PACKAGE_COOKIE?= ${WRKDIR}/.package_done
-
-# How to do nothing. Override if you, for some strange reason, would rather
-# do something.
-DO_NADA?= /usr/bin/true
-
-# Miscellaneous overridable commands:
-GMAKE?= gmake
-AUTOCONF?= autoconf
-XMKMF?= xmkmf -a
-.if exists(/sbin/md5)
-MD5?= /sbin/md5
-.elif exists(/bin/md5)
-MD5?= /bin/md5
-.elif exists(/usr/bin/md5)
-MD5?= /usr/bin/md5
-.else
-MD5?= md5
-.endif
-MD5_FILE= ${FILESDIR}/md5
-
-MAKE_FLAGS?= -f
-MAKEFILE?= Makefile
-MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}" LIBDIR="${LIBDIR}"
-
-.if exists(/usr/bin/fetch)
-FETCH_CMD?= /usr/bin/fetch
-#FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE}
-.else
-FETCH_CMD?= /usr/bin/ftp
-.endif
-
-TOUCH?= /usr/bin/touch
-TOUCH_FLAGS?= -f
-
-PATCH?= /usr/bin/patch
-PATCH_STRIP?= -p0
-PATCH_DIST_STRIP?= -p0
-.if defined(PATCH_DEBUG)
-PATCH_DEBUG_TMP= yes
-PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
-PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
-.else
-PATCH_DEBUG_TMP= no
-PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
-PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
-.endif
-.if defined(BATCH)
-PATCH_ARGS+= --batch
-PATCH_DIST_ARGS+= --batch
-.endif
-
-.if defined(PATCH_CHECK_ONLY)
-PATCH_ARGS+= -C
-PATCH_DIST_ARGS+= -C
-.endif
-
-.if exists(/bin/tar)
-EXTRACT_CMD?= /bin/tar
-.else
-EXTRACT_CMD?= /usr/bin/tar
-.endif
-# Backwards compatability.
-.if defined(EXTRACT_ARGS)
-EXTRACT_BEFORE_ARGS?= ${EXTRACT_ARGS}
-.else
-EXTRACT_BEFORE_ARGS?= -xzf
-.endif
-
-# Figure out where the local mtree file is
-.if !defined(MTREE_FILE)
-.if defined(USE_X_PREFIX)
-MTREE_FILE= /etc/mtree/BSD.x11.dist
-.else
-MTREE_FILE= /etc/mtree/BSD.local.dist
-.endif
-.endif
-MTREE_CMD?= /usr/sbin/mtree
-MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p
-
-# A few aliases for *-install targets
-INSTALL_PROGRAM= \
- ${INSTALL} ${COPY} ${STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
-INSTALL_SCRIPT= \
- ${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
-INSTALL_DATA= \
- ${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
-INSTALL_MAN= \
- ${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
-
-INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
- BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
- BSD_INSTALL_DATA="${INSTALL_DATA}" \
- BSD_INSTALL_MAN="${INSTALL_MAN}"
-MAKE_ENV+= ${INSTALL_MACROS}
-SCRIPTS_ENV+= ${INSTALL_MACROS}
-
-# The user can override the NO_PACKAGE by specifying this from
-# the make command line
-.if defined(FORCE_PACKAGE)
-.undef NO_PACKAGE
-.endif
-
-COMMENT?= ${PKGDIR}/COMMENT
-DESCR?= ${PKGDIR}/DESCR
-PLIST?= ${PKGDIR}/PLIST
-TMPPLIST?= ${WRKDIR}/.PLIST.mktmp
-PKGINSTALL?= ${PKGDIR}/INSTALL
-PKGDEINSTALL?= ${PKGDIR}/DEINSTALL
-PKGREQ?= ${PKGDIR}/REQ
-PKGMESSAGE?= ${PKGDIR}/MESSAGE
-
-PKG_CMD?= /usr/sbin/pkg_create
-PKG_DELETE?= /usr/sbin/pkg_delete
-.if !defined(PKG_ARGS)
-PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`" ${EXTRA_PKG_ARGS}
-.if exists(${PKGINSTALL})
-PKG_ARGS+= -i ${PKGINSTALL}
-.endif
-.if exists(${PKGDEINSTALL})
-PKG_ARGS+= -k ${PKGDEINSTALL}
-.endif
-.if exists(${PKGREQ})
-PKG_ARGS+= -r ${PKGREQ}
-.endif
-.if exists(${PKGMESSAGE})
-PKG_ARGS+= -D ${PKGMESSAGE}
-.endif
-.if !defined(NO_MTREE)
-PKG_ARGS+= -m ${MTREE_FILE}
-.endif
-.endif
-.if defined(PKG_NOCOMPRESS)
-PKG_SUFX?= .tar
-.else
-PKG_SUFX?= .tgz
-.endif
-# where pkg_add records its dirty deeds.
-PKG_DBDIR?= /var/db/pkg
-
-# shared/dynamic motif libs
-.if defined(HAVE_MOTIF)
-.if defined(MOTIF_STATIC)
-MOTIFLIB?= ${X11BASE}/lib/libXm.a
-.else
-MOTIFLIB?= -L${X11BASE}/lib -lXm
-.endif
-.endif
-
-AWK?= /usr/bin/awk
-BASENAME?= /usr/bin/basename
-CAT?= /bin/cat
-CP?= /bin/cp
-ECHO?= /bin/echo
-EXPR?= /bin/expr
-FALSE?= /usr/bin/false
-GREP?= /usr/bin/grep
-GUNZIP_CMD?= /usr/bin/gunzip -f
-GZCAT?= /usr/bin/gzcat
-GZIP?= -9
-GZIP_CMD?= /usr/bin/gzip -nf ${GZIP}
-LDCONFIG?= /sbin/ldconfig
-LN?= /bin/ln
-MKDIR?= /bin/mkdir -p
-MV?= /bin/mv
-RM?= /bin/rm
-RMDIR?= /bin/rmdir
-SED?= /usr/bin/sed
-SETENV?= /usr/bin/env
-SH?= /bin/sh
-TR?= /usr/bin/tr
-TRUE?= /usr/bin/true
-
-# Used to print all the '===>' style prompts - override this to turn them off.
-ECHO_MSG?= ${ECHO}
-
-.for sub in ${PLIST_SUB}
-_sedsubplist!= sym=`${ECHO} "${sub}" | ${SED} -e 's/=.*//'`; \
- val=`${ECHO} "${sub}" | ${SED} -e 's/^[^=][^=]*=//'`; \
- echo "${_sedsubplist} -e s!%%$${sym}%%!$${val}!g"
-.endfor
-
-ALL_TARGET?= all
-INSTALL_TARGET?= install
-
-# Popular master sites
-MASTER_SITE_XCONTRIB+= \
- ftp://crl.dec.com/pub/X11/contrib/%SUBDIR%/ \
- ftp://ftp.eu.net/X11/contrib/%SUBDIR%/
-
-MASTER_SITE_GNU+= \
- ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \
- ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/ \
- ftp://ftp.kddlabs.co.jp/pub/gnu/%SUBDIR%/ \
- ftp://ftp.digex.net/pub/gnu/%SUBDIR%/ \
- ftp://ftp.univ-evry.fr/pub/gnu/%SUBDIR%/ \
- ftp://ftp.cdrom.com/pub/gnu/%SUBDIR%/ \
- ftp://ftp.duke.edu/pub/gnu/%SUBDIR%/ \
- ftp://ftp.gamma.ru/pub/gnu/%SUBDIR%/ \
- ftp://ftp.nihon-u.ac.jp/pub/gnu/%SUBDIR%/
-
-MASTER_SITE_PERL_CPAN+= \
- ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \
- ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/%SUBDIR%/
-
-MASTER_SITE_TEX_CTAN+= \
- ftp://ftp.cdrom.com/pub/tex/ctan/%SUBDIR%/ \
- ftp://wuarchive.wustl.edu/packages/TeX/%SUBDIR%/ \
- ftp://ftp.funet.fi/pub/TeX/CTAN/%SUBDIR%/ \
- ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ \
- ftp://ftp.dante.de/tex-archive/%SUBDIR%/
-
-MASTER_SITE_SUNSITE+= \
- ftp://sunsite.unc.edu/pub/Linux/%SUBDIR%/ \
- ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/%SUBDIR%/ \
- ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/%SUBDIR%/
-
-MASTER_SITE_KDE+= \
- ftp://ftp.us.kde.org/pub/kde/%SUBDIR%/ \
- ftp://ftp.kde.org/pub/kde/%SUBDIR%/ \
- ftp://ftp.tuniv.szczecin.pl/pub/kde/%SUBDIR%/ \
- ftp://ftp.fu-berlin.de/pub/unix/X11/gui/kde/%SUBDIR%/ \
- ftp://ftp.dataplus.se/pub/linux/kde/%SUBDIR%/
-
-MASTER_SITE_COMP_SOURCES+= \
- ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ \
- ftp://ftp.uu.net/usenet/comp.sources.%SUBDIR%/ \
- ftp://rtfm.mit.edu/pub/usenet/comp.sources.%SUBDIR%/
-
-MASTER_SITE_GNOME+= \
- ftp://ftp.jimpick.com/pub/mirrors/gnome/sources/%SUBDIR%/ \
- ftp://ftp.geo.net/pub/gnome/sources/%SUBDIR%/ \
- ftp://gnomeftp.wgn.net/pub/gnome/sources/%SUBDIR%/ \
- ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/
-
-# Empty declaration to avoid "variable MASTER_SITES recursive" error
-MASTER_SITES?=
-PATCH_SITES?=
-
-# To avoid double-slashes
-MASTER_SITE_SUBDIR?= .
-PATCH_SITE_SUBDIR?= .
-
-# Substitute subdirectory names
-MASTER_SITES:= ${MASTER_SITES:S/%SUBDIR%/${MASTER_SITE_SUBDIR}/}
-PATCH_SITES:= ${PATCH_SITES:S/%SUBDIR%/${PATCH_SITE_SUBDIR}/}
-
-# The primary backup site.
-MASTER_SITE_BACKUP?= \
- ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
-
-# If the user has this set, go to the FreeBSD repository for everything.
-.if defined(MASTER_SITE_FREEBSD)
-MASTER_SITE_OVERRIDE= ${MASTER_SITE_BACKUP}
-.endif
-
-# Where to put distfiles that don't have any other master site
-MASTER_SITE_LOCAL?= \
- ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/LOCAL_PORTS/
-
-# I guess we're in the master distribution business! :) As we gain mirror
-# sites for distfiles, add them to this list.
-.if !defined(MASTER_SITE_OVERRIDE)
-MASTER_SITES+= ${MASTER_SITE_BACKUP}
-PATCH_SITES+= ${MASTER_SITE_BACKUP}
-.else
-MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES}
-PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES}
-.endif
-
-# Search CDROM first if mounted, symlink instead of copy if
-# FETCH_SYMLINK_DISTFILES is set
-CD_MOUNTPT?= /cdrom
-.if exists(${CD_MOUNTPT}/ports/distfiles)
-MASTER_SITES:= file:${CD_MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${MASTER_SITES}
-PATCH_SITES:= file:${CD_MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${PATCH_SITES}
-.if defined(FETCH_SYMLINK_DISTFILES)
-FETCH_BEFORE_ARGS+= -l
-.endif
-.endif
-
-# Derived names so that they're easily overridable.
-DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
-PKGNAME?= ${DISTNAME}
-
-ALLFILES?= ${DISTFILES} ${PATCHFILES}
-
-.if defined(IGNOREFILES)
-CKSUMFILES!= \
- for file in ${ALLFILES}; do \
- ignore=0; \
- for tmp in ${IGNOREFILES}; do \
- if [ "$$file" = "$$tmp" ]; then \
- ignore=1; \
- fi; \
- done; \
- if [ "$$ignore" = 0 ]; then \
- echo "$$file"; \
- fi; \
- done
-.else
-CKSUMFILES= ${ALLFILES}
-.endif
-
-# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
-.if defined(DIST_SUBDIR)
-_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
-_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
-.else
-_CKSUMFILES?= ${CKSUMFILES}
-_IGNOREFILES?= ${IGNOREFILES}
-.endif
-
-# This is what is actually going to be extracted, and is overridable
-# by user.
-EXTRACT_ONLY?= ${DISTFILES}
-
-# Documentation
-MAINTAINER?= ports@FreeBSD.ORG
-
-.if !target(maintainer)
-maintainer:
- @${ECHO} ${MAINTAINER}
-.endif
-
-.if !defined(CATEGORIES)
-.BEGIN:
- @${ECHO_MSG} "CATEGORIES is mandatory."
- @${FALSE}
-.endif
-
-# Note this has to start with a capital letter (or more accurately, it
-# shouldn't match "[a-z]*"), see the target "delete-package-links" below.
-PKGREPOSITORYSUBDIR?= All
-PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
-.if exists(${PACKAGES})
-PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
-.else
-PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX}
-.endif
-
-# The "latest version" link -- ${PKGNAME} minus everthing after the last '-'
-PKGLATESTREPOSITORY?= ${PACKAGES}/Latest
-PKGBASE!= ${ECHO} ${PKGNAME} | ${SED} -e 's/-[^-]*$$//'
-PKGLATESTFILE?= ${PKGLATESTREPOSITORY}/${PKGBASE}${PKG_SUFX}
-
-CONFIGURE_SCRIPT?= configure
-
-.if defined(GNU_CONFIGURE)
-CONFIGURE_ARGS+= --prefix=${PREFIX}
-HAS_CONFIGURE= yes
-.endif
-
-# Passed to most of script invocations
-SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \
- WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
- SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
- PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \
- PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
-
-.if defined(BATCH)
-SCRIPTS_ENV+= BATCH=yes
-.endif
-
-MANPREFIX?= ${PREFIX}
-
-.for sect in 1 2 3 4 5 6 7 8 9
-MAN${sect}PREFIX?= ${MANPREFIX}
-.endfor
-MANLPREFIX?= ${MANPREFIX}
-MANNPREFIX?= ${MANPREFIX}
-
-MANLANG?= "" # english only by default
-
-.if !defined(NOMANCOMPRESS)
-MANEXT= .gz
-.endif
-
-.if defined(MLINKS)
-__pmlinks!= ${ECHO} '${MLINKS:S/ / /}' | ${AWK} \
- '{ if (NF % 2 != 0) { print "broken"; exit; } \
- for (i=1; i<=NF; i++) { \
- if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \
- { $$i = $$(i-2); printf " " $$i " "; } \
- else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \
- printf " " $$i " "; \
- else \
- { print "broken"; exit; } \
- } \
- }' | ${SED} -e 's/ \/[^ ]*/ &x/g' -e 's/ [^/ ][^ ]*\.\(.\)[^. ]*/ &\1/g'
-.if ${__pmlinks:Mbroken} == "broken"
-.BEGIN:
- @${ECHO_MSG} "Error: Unable to parse MLINKS."
- @${FALSE}
-.endif
-.endif
-
-.for lang in ${MANLANG}
-
-.for sect in 1 2 3 4 5 6 7 8 9
-.if defined(MAN${sect})
-_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%}
-.endif
-.endfor
-
-.if defined(MANL)
-_MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%}
-.endif
-
-.if defined(MANN)
-_MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%}
-.endif
-
-.if defined(MLINKS)
-.for __page in ${__pmlinks}
-__name= ${__page:S// /:N[1-9lnx]}
-__sect= ${__page:S// /:M[1-9lnx]}
-.if ${__name:M/*}x == x
-_MLINKS+= ${MAN${__sect:S/l/L/:S/n/N/}PREFIX}/man/${lang}/man${__sect}/${__name}${MANEXT}
-.else
-_MLINKS+= ${__name}${MANEXT}
-.endif
-_MLINKS:= ${_MLINKS}
-.endfor
-.endif
-
-.endfor lang in ${MANLANG}
-
-_TMLINKS!= ${ECHO} ${_MLINKS} | ${AWK} '{for (i=2; i<=NF; i+=2) print $$i}'
-
-.if defined(_MANPAGES) && defined(NOMANCOMPRESS)
-__MANPAGES:= ${_MANPAGES:S^${PREFIX}/^^:S/""//:S^//^/^g}
-.elif defined(_MANPAGES)
-__MANPAGES:= ${_MANPAGES:S^${PREFIX}/^^:S/""//:S^//^/^g:S/$/.gz/}
-.endif
-
-.if defined(_MANPAGES) && ${MANCOMPRESSED} == "yes"
-_MANPAGES:= ${_MANPAGES:S/$/.gz/}
-.endif
-
-.MAIN: all
-
-################################################################
-# Many ways to disable a port.
-#
-# If we're in BATCH mode and the port is interactive, or we're
-# in interactive mode and the port is non-interactive, skip all
-# the important targets. The reason we have two modes is that
-# one might want to leave a build in BATCH mode running
-# overnight, then come back in the morning and do _only_ the
-# interactive ones that required your intervention.
-#
-# Don't attempt to build ports that require Motif if you don't
-# have Motif.
-#
-# Ignore ports that can't be resold if building for a CDROM.
-#
-# Don't build a port if it's restricted and we don't want to get
-# into that.
-#
-# Don't build a port on an ELF machine if it's broken for ELF.
-#
-# Don't build a port if it's broken.
-################################################################
-
-OLDSYSTCL!= ${ECHO} /usr/include/tcl.h /usr/lib/libtcl??.so.*.*
-OLDTCL= ${LOCALBASE}/include/tcl.h ${LOCALBASE}/lib/tclConfig.sh
-OLDTK= ${LOCALBASE}/include/tk.h ${LOCALBASE}/lib/tkConfig.sh
-
-.if !defined(NO_IGNORE)
-.for file in ${OLDSYSTCL} ${OLDTCL}
-.if exists(${file})
-IGNORE= ": You have an old file \(${file}\) that could cause problems for some ports to compile. Please remove it and try again. You may have to reinstall tcl from the ports tree afterwards"
-.endif
-.endfor
-.for file in ${OLDTK}
-.if exists(${file})
-IGNORE= ": You have an old file \(${file}\) that could cause problems for some ports to compile. Please remove it and try again. You may have to reinstall tk from the ports tree afterwards"
-.endif
-.endfor
-.endif
-
-.if defined(ONLY_FOR_ARCHS)
-.for __ARCH in ${ONLY_FOR_ARCHS}
-.if ${MACHINE_ARCH:M${__ARCH}} != ""
-__ARCH_OK?= 1
-.endif
-.endfor
-.else
-__ARCH_OK?= 1
-.endif
-
-.if defined(NOT_FOR_ARCHS)
-.for __NARCH in ${NOT_FOR_ARCHS}
-.if ${MACHINE_ARCH:M${__NARCH}} != ""
-.undef __ARCH_OK
-.endif
-.endfor
-.endif
-
-.if !defined(__ARCH_OK)
-.if defined(ONLY_FOR_ARCHS)
-IGNORE= "is only for ${ONLY_FOR_ARCHS},"
-.else # defined(NOT_FOR_ARCHS)
-IGNORE= "does not run on ${NOT_FOR_ARCHS},"
-.endif
-IGNORE+= "and you are running ${ARCH}"
-.endif
-
-.if !defined(NO_IGNORE)
-.if (defined(IS_INTERACTIVE) && defined(BATCH))
-IGNORE= "is an interactive port"
-.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
-IGNORE= "is not an interactive port"
-.elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF))
-IGNORE= "requires Motif"
-.elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF))
-IGNORE= "does not require Motif"
-.elif (defined(NO_CDROM) && defined(FOR_CDROM))
-IGNORE= "may not be placed on a CDROM: ${NO_CDROM}"
-.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
-IGNORE= "is restricted: ${RESTRICTED}"
-.elif defined(NO_WRKDIR)
-IGNORE= "defines NO_WRKDIR, which is obsoleted. If you are defining NO_WRKDIR and NO_EXTRACT, try changing it to NO_WRKSUBDIR=yes and EXTRACT_ONLY= \(the right side intentionally left empty\)"
-.elif defined(NO_EXTRACT)
-IGNORE= "defines NO_EXTRACT, which is obsoleted. Try changing it to EXTRACT_ONLY= \(the right side intentionally left empty\)"
-.elif defined(NO_CONFIGURE)
-IGNORE= "defines NO_CONFIGURE, which is obsoleted"
-.elif defined(NO_PATCH)
-IGNORE= "defines NO_PATCH, which is obsoleted"
-.elif (defined(BROKEN_ELF) && (${PORTOBJFORMAT} == "elf"))
-IGNORE= "is broken for ELF: ${BROKEN_ELF}"
-.elif defined(BROKEN)
-IGNORE= "is marked as broken: ${BROKEN}"
-.endif
-
-.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING) && !defined(PARALLEL_PACKAGE_BUILD))
-IGNORE= "has to be built manually: ${MANUAL_PACKAGE_BUILD}"
-clean:
- @${IGNORECMD}
-.endif
-
-.if defined(IGNORE)
-.if defined(IGNORE_SILENT)
-IGNORECMD= ${DO_NADA}
-.else
-IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}."
-.endif
-fetch:
- @${IGNORECMD}
-checksum:
- @${IGNORECMD}
-extract:
- @${IGNORECMD}
-patch:
- @${IGNORECMD}
-configure:
- @${IGNORECMD}
-all:
- @${IGNORECMD}
-build:
- @${IGNORECMD}
-install:
- @${IGNORECMD}
-reinstall:
- @${IGNORECMD}
-package:
- @${IGNORECMD}
-.endif
-
-.endif
-
-.if defined(IGNORE) || defined(NO_PACKAGE)
-ignorelist: package-name
-.else
-ignorelist:
- @${DO_NADA}
-.endif
-
-################################################################
-# Clean directories for ftp or CDROM.
-################################################################
-
-.if defined(RESTRICTED)
-clean-restricted: delete-distfiles delete-package
-.else
-clean-restricted:
-.endif
-
-.if defined(NO_CDROM)
-clean-for-cdrom: delete-distfiles delete-package
-.else
-clean-for-cdrom:
-.endif
-
-.if defined(ALL_HOOK)
-all:
- @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
- DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
- PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
- FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
- DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \
- RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
- ${ALL_HOOK}
-.endif
-
-.if !target(all)
-all: build
-.endif
-
-.if !defined(DEPENDS_TARGET)
-.if make(reinstall)
-DEPENDS_TARGET= reinstall
-.else
-DEPENDS_TARGET= install
-.endif
-.endif
-
-################################################################
-# The following are used to create easy dummy targets for
-# disabling some bit of default target behavior you don't want.
-# They still check to see if the target exists, and if so don't
-# do anything, since you might want to set this globally for a
-# group of ports in a Makefile.inc, but still be able to
-# override from an individual Makefile.
-################################################################
-
-# Disable checksum
-.if defined(NO_CHECKSUM) && !target(checksum)
-checksum: fetch
- @${DO_NADA}
-.endif
-
-# Disable build
-.if defined(NO_BUILD) && !target(build)
-build: configure
- @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
-.endif
-
-# Disable install
-.if defined(NO_INSTALL) && !target(install)
-install: build
- @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
-.endif
-
-# Disable package
-.if defined(NO_PACKAGE) && !target(package)
-package:
-.if defined(IGNORE_SILENT)
- @${DO_NADA}
-.else
- @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
-.endif
-.endif
-
-# Disable describe
-.if defined(NO_DESCRIBE) && !target(describe)
-describe:
- @${DO_NADA}
-.endif
-
-################################################################
-# More standard targets start here.
-#
-# These are the body of the build/install framework. If you are
-# not happy with the default actions, and you can't solve it by
-# adding pre-* or post-* targets/scripts, override these.
-################################################################
-
-# Fetch
-
-.if !target(do-fetch)
-do-fetch:
- @${MKDIR} ${_DISTDIR}
- @(cd ${_DISTDIR}; \
- for file in ${DISTFILES}; do \
- if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
- if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
- ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
- ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
- ${ECHO_MSG} ">> Please correct this problem and try again."; \
- exit 1; \
- fi ; \
- ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
- for site in ${MASTER_SITES}; do \
- ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
- DIR=${DIST_SUBDIR}; \
- CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
- if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
- continue 2; \
- fi \
- done; \
- ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
- ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
- exit 1; \
- fi \
- done)
-.if defined(PATCHFILES)
- @(cd ${_DISTDIR}; \
- for file in ${PATCHFILES}; do \
- if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
- if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
- ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
- ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
- ${ECHO_MSG} ">> Please correct this problem and try again."; \
- exit 1; \
- fi ; \
- ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
- for site in ${PATCH_SITES}; do \
- ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
- DIR=${DIST_SUBDIR}; \
- CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
- if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
- continue 2; \
- fi \
- done; \
- ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
- ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
- exit 1; \
- fi \
- done)
-.endif
-.endif
-
-# Extract
-
-.if !target(do-extract)
-do-extract:
- @${RM} -rf ${WRKDIR}
- @${MKDIR} ${WRKDIR}
- @for file in ${EXTRACT_ONLY}; do \
- if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
- then \
- exit 1; \
- fi \
- done
-.endif
-
-# Patch
-
-.if !target(do-patch)
-do-patch:
-.if defined(PATCHFILES)
- @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
- @(cd ${_DISTDIR}; \
- for i in ${PATCHFILES}; do \
- if [ ${PATCH_DEBUG_TMP} = yes ]; then \
- ${ECHO_MSG} "===> Applying distribution patch $$i" ; \
- fi; \
- case $$i in \
- *.Z|*.gz) \
- ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
- ;; \
- *) \
- ${PATCH} ${PATCH_DIST_ARGS} < $$i; \
- ;; \
- esac; \
- done)
-.endif
- @if [ -d ${PATCHDIR} ]; then \
- if [ "`echo ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \
- ${ECHO_MSG} "===> Ignoring empty patch directory"; \
- if [ -d ${PATCHDIR}/CVS ]; then \
- ${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \
- fi; \
- else \
- ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \
- for i in ${PATCHDIR}/patch-*; do \
- case $$i in \
- *.orig|*.rej|*~) \
- ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
- ;; \
- *) \
- if [ ${PATCH_DEBUG_TMP} = yes ]; then \
- ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
- fi; \
- ${PATCH} ${PATCH_ARGS} < $$i; \
- ;; \
- esac; \
- done; \
- fi; \
- fi
-.endif
-
-# Configure
-
-.if !target(do-configure)
-do-configure:
-.if defined(USE_AUTOCONF)
- @(cd ${WRKSRC} && ${AUTOCONF})
-.endif
- @if [ -f ${SCRIPTDIR}/configure ]; then \
- cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
- ${SCRIPTDIR}/configure; \
- fi
-.if defined(HAS_CONFIGURE)
- @(cd ${WRKSRC} && CC="${CC}" CXX="${CXX}" ac_cv_path_CC="${CC}" \
- CFLAGS="${CFLAGS}" \
- INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
- INSTALL_DATA="${INSTALL_DATA}" \
- INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
- INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
- ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS})
-.endif
-.if defined(USE_IMAKE)
- @(cd ${WRKSRC} && ${XMKMF})
-.endif
-.endif
-
-# Build
-
-.if !target(do-build)
-do-build:
-.if defined(USE_GMAKE)
- @(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET})
-.else defined(USE_GMAKE)
- @(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET})
-.endif
-.endif
-
-# Install
-
-.if !target(do-install)
-do-install:
-.if defined(USE_GMAKE)
- @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
-.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
- @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
-.endif
-.else defined(USE_GMAKE)
- @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
-.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
- @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
-.endif
-.endif
-.endif
-
-# Package
-
-.if !target(do-package)
-do-package: ${TMPPLIST}
- @${ECHO_MSG} "===> Building package for ${PKGNAME}"
- @if [ -d ${PACKAGES} ]; then \
- if [ ! -d ${PKGREPOSITORY} ]; then \
- if ! ${MKDIR} ${PKGREPOSITORY}; then \
- ${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
- exit 1; \
- fi; \
- fi; \
- fi
- @if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
- if [ -d ${PACKAGES} ]; then \
- ${MAKE} ${.MAKEFLAGS} package-links; \
- fi; \
- else \
- ${MAKE} ${.MAKEFLAGS} delete-package; \
- exit 1; \
- fi
-.endif
-
-# Some support rules for do-package
-
-.if !target(package-links)
-package-links:
- @${MAKE} ${.MAKEFLAGS} delete-package-links
- @for cat in ${CATEGORIES}; do \
- if [ ! -d ${PACKAGES}/$$cat ]; then \
- if ! ${MKDIR} ${PACKAGES}/$$cat; then \
- ${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
- exit 1; \
- fi; \
- fi; \
- ${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
- done
-.if !defined(NO_LATEST_LINK)
- @if [ ! -d ${PKGLATESTREPOSITORY} ]; then \
- if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \
- ${ECHO_MSG} ">> Can't create directory ${PKGLATESTREPOSITORY}."; \
- exit 1; \
- fi; \
- fi
- @${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE}
-.endif
-.endif
-
-.if !target(delete-package-links)
-delete-package-links:
- @${RM} -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX}
-.if !defined(NO_LATEST_LINK)
- @${RM} -f ${PKGLATESTFILE}
-.endif
-.endif
-
-.if !target(delete-package)
-delete-package:
- @${MAKE} ${.MAKEFLAGS} delete-package-links
- @${RM} -f ${PKGFILE}
-.endif
-
-################################################################
-# This is the "generic" port target, actually a macro used from the
-# six main targets. See below for more.
-################################################################
-
-_PORT_USE: .USE
-.if make(real-fetch)
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
-.endif
-.if make(real-extract)
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} checksum REAL_EXTRACT=yes
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends
-.endif
-.if make(real-install)
-.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
- @if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \
- ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
- ${ECHO_MSG} " If so, you may wish to \`\`make deinstall'' and install"; \
- ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \
- ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGNAME}"; \
- ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
- ${ECHO_MSG} " in your environment or the \"make install\" command line."; \
- exit 1; \
- fi
-.endif
- @if [ `${SH} -c umask` != 0022 ]; then \
- ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \
- ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
- ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
- fi
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends
-.endif
-.if make(real-install)
-.if !defined(NO_MTREE)
- @if [ `id -u` = 0 ]; then \
- ${MKDIR} ${PREFIX}; \
- if [ ! -f ${MTREE_FILE} ]; then \
- ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
- ${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
- exit 1; \
- else \
- ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \
- fi; \
- else \
- ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
- ${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
- fi
-.endif
-.endif
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
- @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
- cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
- ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
- fi
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
-# put here so ports can change the contents of ${TMPPLIST} if necessary
-.if make(real-install)
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} generate-plist
-.endif
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
- @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
- cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
- ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
- fi
-.if make(real-install) && (defined(_MANPAGES) || defined(_MLINKS))
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} compress-man
-.endif
-.if make(real-install) && !defined(NO_PKG_REGISTER)
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg
-.endif
-.if !make(real-fetch) \
- && (!make(real-patch) || !defined(PATCH_CHECK_ONLY)) \
- && (!make(real-package) || !defined(PACKAGE_NOINSTALL))
- @${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.${.TARGET:S/^real-//}_done
-.endif
-
-################################################################
-# Skeleton targets start here
-#
-# You shouldn't have to change these. Either add the pre-* or
-# post-* targets/scripts or redefine the do-* targets. These
-# targets don't do anything other than checking for cookies and
-# call the necessary targets/scripts.
-################################################################
-
-.if !target(fetch)
-fetch:
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch
-.endif
-
-.if !target(extract)
-extract: ${EXTRACT_COOKIE}
-.endif
-
-.if !target(patch)
-patch: ${PATCH_COOKIE}
-.endif
-
-.if !target(configure)
-configure: ${CONFIGURE_COOKIE}
-.endif
-
-.if !target(build)
-build: ${BUILD_COOKIE}
-.endif
-
-.if !target(install)
-install: ${INSTALL_COOKIE}
-.endif
-
-.if !target(package)
-package: ${PACKAGE_COOKIE}
-.endif
-
-${EXTRACT_COOKIE}:
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-extract
-${PATCH_COOKIE}:
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} extract
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch
-${CONFIGURE_COOKIE}:
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} patch
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure
-${BUILD_COOKIE}:
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} configure
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
-${INSTALL_COOKIE}:
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install
-${PACKAGE_COOKIE}:
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} install
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package
-
-# And call the macros
-
-real-fetch: _PORT_USE
-real-extract: _PORT_USE
- @${ECHO_MSG} "===> Extracting for ${PKGNAME}"
-real-patch: _PORT_USE
- @${ECHO_MSG} "===> Patching for ${PKGNAME}"
-real-configure: _PORT_USE
- @${ECHO_MSG} "===> Configuring for ${PKGNAME}"
-real-build: _PORT_USE
- @${ECHO_MSG} "===> Building for ${PKGNAME}"
-real-install: _PORT_USE
- @${ECHO_MSG} "===> Installing for ${PKGNAME}"
-real-package: _PORT_USE
-
-# Empty pre-* and post-* targets, note we can't use .if !target()
-# in the _PORT_USE macro
-
-.for name in fetch extract patch configure build install package
-
-.if !target(pre-${name})
-pre-${name}:
- @${DO_NADA}
-.endif
-
-.if !target(post-${name})
-post-${name}:
- @${DO_NADA}
-.endif
-
-.endfor
-
-# Checkpatch
-#
-# Special target to verify patches
-
-.if !target(checkpatch)
-checkpatch:
- @cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch
-.endif
-
-# Reinstall
-#
-# Special target to re-run install
-
-.if !target(reinstall)
-reinstall:
- @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
- @DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} install
-.endif
-
-# Deinstall
-#
-# Special target to remove installation
-
-.if !target(deinstall)
-deinstall:
- @${ECHO_MSG} "===> Deinstalling for ${PKGNAME}"
- @${PKG_DELETE} -f ${PKGNAME}
- @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
-.endif
-
-################################################################
-# Some more targets supplied for users' convenience
-################################################################
-
-# Cleaning up
-
-.if !target(pre-clean)
-pre-clean:
- @${DO_NADA}
-.endif
-
-.if !target(clean)
-clean: pre-clean
-.if !defined(NOCLEANDEPENDS)
- @${MAKE} clean-depends
-.endif
- @${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
- @if [ -d ${WRKDIR} ]; then \
- if [ -w ${WRKDIR} ]; then \
- ${RM} -rf ${WRKDIR}; \
- else \
- ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
- fi; \
- fi
-.endif
-
-.if !target(pre-distclean)
-pre-distclean:
- @${DO_NADA}
-.endif
-
-.if !target(distclean)
-distclean: pre-distclean clean delete-distfiles
-.endif
-
-.if !target(delete-distfiles)
-delete-distfiles:
- @${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}"
- @(if [ "X${DISTFILES}${PATCHFILES}" != "X" -a -d ${_DISTDIR} ]; then \
- cd ${_DISTDIR}; \
- ${RM} -f ${DISTFILES} ${PATCHFILES}; \
- fi)
-.if defined(DIST_SUBDIR)
- -@${RMDIR} ${_DISTDIR}
-.endif
-.endif
-
-# Prints out a list of files to fetch (useful to do a batch fetch)
-
-.if !target(fetch-list)
-fetch-list:
- @${MKDIR} ${_DISTDIR}
- @(cd ${_DISTDIR}; \
- for file in ${DISTFILES}; do \
- if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
- for site in ${MASTER_SITES}; do \
- DIR=${DIST_SUBDIR}; \
- CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
- ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \
- break; \
- done; \
- ${ECHO} "echo $${file} not fetched" ; \
- fi \
- done)
-.if defined(PATCHFILES)
- @(cd ${_DISTDIR}; \
- for file in ${PATCHFILES}; do \
- if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
- for site in ${PATCH_SITES}; do \
- DIR=${DIST_SUBDIR}; \
- CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
- ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \
- break; \
- done; \
- ${ECHO} "echo $${file} not fetched" ; \
- fi \
- done)
-.endif
-.endif
-
-# Checksumming utilities
-
-.if !target(makesum)
-makesum: fetch
- @${MKDIR} ${FILESDIR}
- @if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi
- @(cd ${DISTDIR}; \
- for file in ${_CKSUMFILES}; do \
- ${MD5} $$file >> ${MD5_FILE}; \
- done)
- @for file in ${_IGNOREFILES}; do \
- ${ECHO} "MD5 ($$file) = IGNORE" >> ${MD5_FILE}; \
- done
-.endif
-# this line goes after the ${MD5} above
-# echo "SIZE ($$file) = "`wc -c < $$file` >> ${MD5_FILE}; \
-
-
-.if !target(checksum)
-checksum:
-.if !defined(REAL_EXTRACT)
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch
-.endif
- @if [ ! -f ${MD5_FILE} ]; then \
- ${ECHO_MSG} ">> No MD5 checksum file."; \
- else \
- (cd ${DISTDIR}; OK="true"; \
- for file in ${_CKSUMFILES}; do \
- CKSUM=`${MD5} < $$file`; \
- CKSUM2=`${GREP} "^MD5 ($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
- if [ "$$CKSUM2" = "" ]; then \
- ${ECHO_MSG} ">> No checksum recorded for $$file."; \
- OK="false"; \
- elif [ "$$CKSUM2" = "IGNORE" ]; then \
- ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \
- ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
- OK="false"; \
- elif ${EXPR} "$$CKSUM2" : ".*$$CKSUM" > /dev/null; then \
- ${ECHO_MSG} ">> Checksum OK for $$file."; \
- else \
- ${ECHO_MSG} ">> Checksum mismatch for $$file."; \
- OK="false"; \
- fi; \
- done; \
- for file in ${_IGNOREFILES}; do \
- CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
- if [ "$$CKSUM2" = "" ]; then \
- ${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
- OK="false"; \
- elif [ "$$CKSUM2" != "IGNORE" ]; then \
- ${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \
- ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
- OK="false"; \
- fi; \
- done; \
- if [ "$$OK" != "true" ]; then \
- ${ECHO_MSG} "Make sure the Makefile and md5 file (${MD5_FILE})"; \
- ${ECHO_MSG} "are up to date. If you want to override this check, type"; \
- ${ECHO_MSG} "\"make NO_CHECKSUM=yes [other args]\"."; \
- exit 1; \
- fi) ; \
- fi
-.endif
-
-################################################################
-# The special package-building targets
-# You probably won't need to touch these
-################################################################
-
-# Nobody should want to override this unless PKGNAME is simply bogus.
-
-.if !target(package-name)
-package-name:
- @${ECHO} ${PKGNAME}
-.endif
-
-# Build a package but don't check the package cookie
-
-.if !target(repackage)
-repackage: pre-repackage package
-
-pre-repackage:
- @${RM} -f ${PACKAGE_COOKIE}
-.endif
-
-# Build a package but don't check the cookie for installation, also don't
-# install package cookie
-
-.if !target(package-noinstall)
-package-noinstall:
- @${MKDIR} ${WRKDIR}
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
- @${RM} ${TMPPLIST}
- -@${RMDIR} ${WRKDIR}
-.endif
-
-################################################################
-# Dependency checking
-################################################################
-
-.if !target(depends)
-depends: lib-depends misc-depends
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends
-
-.if make(fetch-depends)
-DEPENDS_TMP+= ${FETCH_DEPENDS}
-.endif
-
-.if make(build-depends)
-DEPENDS_TMP+= ${BUILD_DEPENDS}
-.endif
-
-.if make(run-depends)
-DEPENDS_TMP+= ${RUN_DEPENDS}
-.endif
-
-_DEPENDS_USE: .USE
-.if defined(DEPENDS_TMP)
-.if !defined(NO_DEPENDS)
- @for i in ${DEPENDS_TMP}; do \
- prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
- dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
- if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
- target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
- dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
- else \
- target=${DEPENDS_TARGET}; \
- fi; \
- if ${EXPR} "$$prog" : \\/ >/dev/null; then \
- if [ -e "$$prog" ]; then \
- ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
- notfound=0; \
- else \
- ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
- notfound=1; \
- fi; \
- else \
- if which "$$prog" > /dev/null 2>&1 ; then \
- ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
- notfound=0; \
- else \
- ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \
- notfound=1; \
- fi; \
- fi; \
- if [ $$notfound != 0 ]; then \
- ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \
- if [ ! -d "$$dir" ]; then \
- ${ECHO_MSG} " >> No directory for $$prog. Skipping.."; \
- else \
- (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
- ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
- fi; \
- fi; \
- done
-.endif
-.else
- @${DO_NADA}
-.endif
-
-fetch-depends: _DEPENDS_USE
-build-depends: _DEPENDS_USE
-run-depends: _DEPENDS_USE
-
-lib-depends:
-.if defined(LIB_DEPENDS)
-.if !defined(NO_DEPENDS)
- @for i in ${LIB_DEPENDS}; do \
- lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
- dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
- if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
- target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
- dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
- else \
- target=${DEPENDS_TARGET}; \
- fi; \
- if ${LDCONFIG} -r | ${GREP} -qwF -e "-l$$lib"; then \
- ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - found"; \
- else \
- ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - not found"; \
- ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
- if [ ! -d "$$dir" ]; then \
- ${ECHO_MSG} " >> No directory for $$lib. Skipping.."; \
- else \
- (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
- ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
- if ${LDCONFIG} -r | ${GREP} -qwF -e "-l$$lib"; then \
- ${TRUE}; \
- else \
- ${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \
- ${FALSE}; \
- fi; \
- fi; \
- fi; \
- done
-.endif
-.else
- @${DO_NADA}
-.endif
-
-misc-depends:
-.if defined(DEPENDS)
-.if !defined(NO_DEPENDS)
- @for dir in ${DEPENDS}; do \
- if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
- target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
- dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
- else \
- target=${DEPENDS_TARGET}; \
- fi; \
- ${ECHO_MSG} "===> ${PKGNAME} depends on: $$dir"; \
- ${ECHO_MSG} "===> Verifying $$target for $$dir"; \
- if [ ! -d $$dir ]; then \
- ${ECHO_MSG} " >> No directory for $$dir. Skipping.."; \
- else \
- (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
- fi \
- done
- @${ECHO_MSG} "===> Returning to build of ${PKGNAME}"
-.endif
-.else
- @${DO_NADA}
-.endif
-
-.endif
-
-.if !target(clean-depends)
-clean-depends:
-.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \
- || defined(RUN_DEPENDS)
- @for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \
- if [ -d $$dir ] ; then \
- (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
- fi \
- done
-.endif
-.if defined(DEPENDS)
- @for dir in `${ECHO} "${DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
- if [ -d $$dir ] ; then \
- (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
- fi \
- done
-.endif
-.endif
-
-# Dependency lists: build and runtime. Print out directory names.
-
-build-depends-list:
- @for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
- if [ -d $$dir ]; then \
- ${ECHO} $$dir; \
- else \
- ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
- fi; \
- done | sort -u
-
-run-depends-list:
- @for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
- if [ -d $$dir ]; then \
- ${ECHO} $$dir; \
- else \
- ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
- fi; \
- done | sort -u
-
-# This one does not print out directory names -- it could take a long time.
-package-depends:
- @for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
- if [ -d $$dir ]; then \
- (cd $$dir ; ${MAKE} package-name package-depends); \
- else \
- ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
- fi; \
- done
-
-################################################################
-# Everything after here are internal targets and really
-# shouldn't be touched by anybody but the release engineers.
-################################################################
-
-# This target generates an index entry suitable for aggregation into
-# a large index. Format is:
-#
-# distribution-name|port-path|installation-prefix|comment| \
-# description-file|maintainer|categories|build deps|run deps
-
-.if !target(describe)
-describe:
- @${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \
- ${ECHO} -n "${PREFIX}|"; \
- if [ -f ${COMMENT} ]; then \
- ${ECHO} -n "`${CAT} ${COMMENT}`"; \
- else \
- ${ECHO} -n "** No Description"; \
- fi; \
- if [ -f ${DESCR} ]; then \
- ${ECHO} -n "|${DESCR}"; \
- else \
- ${ECHO} -n "|/dev/null"; \
- fi; \
- ${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \
- case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \
- ABCDE) ;; \
- *) cd ${.CURDIR} && ${ECHO} -n `${MAKE} build-depends-list|sort -u`;; \
- esac; \
- ${ECHO} -n "|"; \
- case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \
- ABCD) ;; \
- *) cd ${.CURDIR} && ${ECHO} -n `${MAKE} run-depends-list|sort -u`;; \
- esac; \
- ${ECHO} ""
-.endif
-
-.if !target(readmes)
-readmes: readme
-.endif
-
-.if !target(readme)
-readme:
- @rm -f README.html
- @cd ${.CURDIR} && make README.html
-.endif
-
-README.html:
- @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
- @${CAT} ${TEMPLATES}/README.port | \
- ${SED} -e 's%%PORT%%'`${ECHO} ${.CURDIR} | ${SED} -e 's.*/\([^/]*/[^/]*\)$$\1'`'g' \
- -e 's%%PKG%%${PKGNAME}g' \
- -e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \
- -e '/%%COMMENT%%/d' \
- -e 's%%BUILD_DEPENDS%%'"`${MAKE} pretty-print-build-depends-list`"'' \
- -e 's%%RUN_DEPENDS%%'"`${MAKE} pretty-print-run-depends-list`"'' \
- >> $@
-
-# The following two targets require an up-to-date INDEX in ${PORTSDIR}
-
-.if !target(pretty-print-build-depends-list)
-pretty-print-build-depends-list:
-.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
- defined(LIB_DEPENDS) || defined(DEPENDS)
- @${ECHO} -n 'This port requires package(s) "'
- @${ECHO} -n `grep '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$8;}'`
- @${ECHO} '" to build.'
-.endif
-.endif
-
-.if !target(pretty-print-run-depends-list)
-pretty-print-run-depends-list:
-.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
- @${ECHO} -n 'This port requires package(s) "'
- @${ECHO} -n `grep '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$9;}'`
- @${ECHO} '" to run.'
-.endif
-.endif
-
-# Generate packing list. Also tests to make sure all required package
-# files exist.
-
-.if !target(generate-plist)
-generate-plist:
- @${ECHO_MSG} "===> Generating temporary packing list"
- @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME}."; exit 1; fi
- @>${TMPPLIST}
-.for man in ${__MANPAGES}
- @${ECHO} ${man} >> ${TMPPLIST}
-.endfor
-.for _PREFIX in ${PREFIX}
-.if ${_TMLINKS:M${_PREFIX}*}x != x
- @for i in ${_TMLINKS:M${_PREFIX}*:S,^${_PREFIX}/,,}; do \
- ${ECHO} "$$i" >> ${TMPPLIST}; \
- done
-.endif
-.if ${_TMLINKS:N${_PREFIX}*}x != x
- @${ECHO} @cwd / >> ${TMPPLIST}
- @for i in ${_TMLINKS:N${_PREFIX}*:S,^/,,}; do \
- ${ECHO} "$$i" >> ${TMPPLIST}; \
- done
- @${ECHO} '@cwd ${PREFIX}' >> ${TMPPLIST}
-.endif
-.endfor
- @${SED} ${_sedsubplist} ${PLIST} >> ${TMPPLIST}
-.if !defined(NO_FILTER_SHLIBS)
-.if (${PORTOBJFORMAT} == "aout")
- @${SED} -e 's,\(/lib.*\.so\.[0-9]*\)$$,\1.0,' ${TMPPLIST} > ${TMPPLIST}.tmp
-.else
- @${SED} -e 's,\(/lib.*\.so\.[0-9]*\)\.[0-9]*$$,\1,' ${TMPPLIST} > ${TMPPLIST}.tmp
-.endif
- @${MV} -f ${TMPPLIST}.tmp ${TMPPLIST}
-.endif
-.endif
-
-${TMPPLIST}:
- @cd ${.CURDIR} && ${MAKE} generate-plist
-
-# Compress (or uncompress) and symlink manpages.
-.if !target(compress-man)
-compress-man:
-.if ${MANCOMPRESSED} == yes && defined(NOMANCOMPRESS)
- @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
-.for manpage in ${_MANPAGES}
- @${GUNZIP_CMD} ${manpage}
-.endfor
-.elif ${MANCOMPRESSED} == no && !defined(NOMANCOMPRESS)
- @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
-.for manpage in ${_MANPAGES}
- @${GZIP_CMD} ${manpage}
-.endfor
-.endif
-.if defined(_MLINKS)
- @set ${_MLINKS:S,"",,g:S,//,/,g}; \
- while :; do \
- [ $$# -eq 0 ] && break || ${TRUE}; \
- ${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \
- ${LN} -fs `${ECHO} $$1 $$2 | ${AWK} '{ \
- z=split($$1, a, /\//); x=split($$2, b, /\//); \
- while (a[i] == b[i]) i++; \
- for (q=i; q<x; q++) printf "../"; \
- for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \
- shift; shift; \
- done
-.endif
-.endif
-
-# Fake installation of package so that user can pkg_delete it later.
-# Also, make sure that an installed port is recognized correctly in
-# accordance to the @pkgdep directive in the packing lists
-
-.if !target(fake-pkg)
-fake-pkg:
- @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
-.if defined(FORCE_PKG_REGISTER)
- @${RM} -rf ${PKG_DBDIR}/${PKGNAME}
-.endif
- @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
- ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
- ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
- ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
- ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
- ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
- if [ -f ${PKGINSTALL} ]; then \
- ${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
- fi; \
- if [ -f ${PKGDEINSTALL} ]; then \
- ${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
- fi; \
- if [ -f ${PKGREQ} ]; then \
- ${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
- fi; \
- if [ -f ${PKGMESSAGE} ]; then \
- ${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
- fi; \
- for dep in `${MAKE} package-depends ECHO_MSG=/usr/bin/true | sort -u`; do \
- if [ -d ${PKG_DBDIR}/$$dep ]; then \
- if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
- >/dev/null 2>&1; then \
- ${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
- fi; \
- fi; \
- done; \
- fi
-.endif
-
-# Depend is generally meaningless for arbitrary ports, but if someone wants
-# one they can override this. This is just to catch people who've gotten into
-# the habit of typing `make depend all install' as a matter of course.
-#
-.if !target(depend)
-depend:
-.endif
-
-# Same goes for tags
-.if !target(tags)
-tags:
-.endif
-
-.endif
-# End of post-makefile section.
+PORTSDIR?= /usr/ports
+.include "${PORTSDIR}/Mk/bsd.port.mk"
diff --git a/share/mk/bsd.port.post.mk b/share/mk/bsd.port.post.mk
index be53028..d34d246 100644
--- a/share/mk/bsd.port.post.mk
+++ b/share/mk/bsd.port.post.mk
@@ -1,7 +1,7 @@
-# $Id$
+# $Id: bsd.port.post.mk,v 1.1 1998/11/11 05:21:28 asami Exp $
AFTERPORTMK= yes
-.include <bsd.port.mk>
+.include "bsd.port.mk"
.undef AFTERPORTMK
diff --git a/share/mk/bsd.port.pre.mk b/share/mk/bsd.port.pre.mk
index b4fc122..739ebd5 100644
--- a/share/mk/bsd.port.pre.mk
+++ b/share/mk/bsd.port.pre.mk
@@ -1,7 +1,7 @@
-# $Id$
+# $Id: bsd.port.pre.mk,v 1.1 1998/11/11 05:21:29 asami Exp $
BEFOREPORTMK= yes
-.include <bsd.port.mk>
+.include "bsd.port.mk"
.undef BEFOREPORTMK
diff --git a/share/mk/bsd.port.subdir.mk b/share/mk/bsd.port.subdir.mk
index 45928f8..0647e6a 100644
--- a/share/mk/bsd.port.subdir.mk
+++ b/share/mk/bsd.port.subdir.mk
@@ -1,184 +1,2 @@
-# from: @(#)bsd.subdir.mk 5.9 (Berkeley) 2/1/91
-# $Id: bsd.port.subdir.mk,v 1.26 1998/11/08 10:29:53 asami Exp $
-#
-# The include file <bsd.port.subdir.mk> contains the default targets
-# for building ports subdirectories.
-#
-#
-# +++ variables +++
-#
-# STRIP The flag passed to the install program to cause the binary
-# to be stripped. This is to be used when building your
-# own install script so that the entire system can be made
-# stripped/not-stripped using a single knob. [-s]
-#
-# ECHO_MSG Used to print all the '===>' style prompts - override this
-# to turn them off [echo].
-#
-# OPSYS Get the operating system type [`uname -s`]
-#
-# SUBDIR A list of subdirectories that should be built as well.
-# Each of the targets will execute the same target in the
-# subdirectories.
-#
-#
-# +++ targets +++
-#
-# README.html:
-# Creating README.html for package.
-#
-# afterinstall, all, beforeinstall, build, checksum, clean,
-# clean-for-cdrom, clean-restricted, configure, deinstall,
-# depend, depends, describe, extract, fetch, fetch-list, ignorelist,
-# install, package, package-loop, readmes, realinstall, reinstall, tags
-#
-
-
-.MAIN: all
-
-.if !defined(DEBUG_FLAGS)
-STRIP?= -s
-.endif
-
-.if !defined(OPSYS) # XXX !!
-OPSYS!= uname -s
-.endif
-
-ECHO_MSG?= echo
-
-_SUBDIRUSE: .USE
- @for entry in ${SUBDIR}; do \
- OK=""; \
- for dud in $$DUDS; do \
- if [ $${dud} = $${entry} ]; then \
- OK="false"; \
- ${ECHO_MSG} "===> ${DIRPRFX}$${entry} skipped"; \
- fi; \
- done; \
- if test -d ${.CURDIR}/$${entry}.${MACHINE}; then \
- edir=$${entry}.${MACHINE}; \
- elif test -d ${.CURDIR}/$${entry}; then \
- edir=$${entry}; \
- else \
- OK="false"; \
- ${ECHO_MSG} "===> ${DIRPRFX}$${entry} non-existent"; \
- fi; \
- if [ "$$OK" = "" ]; then \
- ${ECHO_MSG} "===> ${DIRPRFX}$${edir}"; \
- cd ${.CURDIR}/$${edir}; \
- ${MAKE} ${.TARGET:realinstall=install} \
- DIRPRFX=${DIRPRFX}$$edir/; \
- fi; \
- done
-
-${SUBDIR}::
- @if test -d ${.TARGET}.${MACHINE}; then \
- cd ${.CURDIR}/${.TARGET}.${MACHINE}; \
- else \
- cd ${.CURDIR}/${.TARGET}; \
- fi; \
- ${MAKE} all
-
-.for __target in all fetch fetch-list package package-loop extract configure \
- build clean clean-for-cdrom clean-restricted \
- deinstall depend depends describe distclean \
- reinstall tags checksum \
- ignorelist
-.if !target(${__target})
-${__target}: _SUBDIRUSE
-.endif
-.endfor
-
-.if !target(install)
-.if !target(beforeinstall)
-beforeinstall:
-.endif
-.if !target(afterinstall)
-afterinstall:
-.endif
-install: afterinstall
-afterinstall: realinstall
-realinstall: beforeinstall _SUBDIRUSE
-.endif
-
-IGNOREDIR= CVS distfiles packages pkg templates
-
-.if !target(checksubdirs)
-.if defined(PORTSTOP)
-checksubdirs: checksubdir _SUBDIRUSE
-.else
-checksubdirs: checksubdir
-.endif
-.endif
-
-.if !target(checksubdir)
-checksubdir:
- @for d in *; do \
- if [ -d "$$d" ]; then \
- found=0; \
- for s in ${SUBDIR} ${IGNOREDIR}; do \
- if [ "x$$s" = "x$$d" ]; then \
- found=1; \
- break; \
- fi; \
- done; \
- if [ $$found = 0 ]; then \
- ${ECHO} "Warning: directory $$d not in SUBDIR"; \
- fi; \
- fi; \
- done
-.endif
-
-.if !target(readmes)
-readmes: readme _SUBDIRUSE
-.endif
-
-.if !target(readme)
-readme:
- @rm -f README.html
- @make README.html
-.endif
-
-.if (${OPSYS} == "NetBSD")
-PORTSDIR ?= /usr/opt
-.else
-PORTSDIR ?= /usr/ports
-.endif
-TEMPLATES ?= ${PORTSDIR}/templates
-.if defined(PORTSTOP)
-README= ${TEMPLATES}/README.top
-.else
-README= ${TEMPLATES}/README.category
-.endif
-
-HTMLIFY= sed -e 's/&/\&amp;/g' -e 's/>/\&gt;/g' -e 's/</\&lt;/g'
-
-README.html:
- @echo "===> Creating README.html"
- @> $@.tmp
-.for entry in ${SUBDIR}
-.if defined(PORTSTOP)
- @echo -n '<a href="'${entry}/README.html'">'"`echo ${entry} | ${HTMLIFY}`"'</a>: ' >> $@.tmp
-.else
- @echo -n '<a href="'${entry}/README.html'">'"`cd ${entry}; make package-name | ${HTMLIFY}`</a>: " >> $@.tmp
-.endif
-.if exists(${entry}/pkg/COMMENT)
- @${HTMLIFY} ${entry}/pkg/COMMENT >> $@.tmp
-.else
- @echo "(no description)" >> $@.tmp
-.endif
-.endfor
- @sort -t '>' +1 -2 $@.tmp > $@.tmp2
-.if exists(${.CURDIR}/pkg/DESCR)
- @${HTMLIFY} ${.CURDIR}/pkg/DESCR > $@.tmp3
-.else
- @> $@.tmp3
-.endif
- @cat ${README} | \
- sed -e 's/%%CATEGORY%%/'"`basename ${.CURDIR}`"'/g' \
- -e '/%%DESCR%%/r$@.tmp3' \
- -e '/%%DESCR%%/d' \
- -e '/%%SUBDIR%%/r$@.tmp2' \
- -e '/%%SUBDIR%%/d' \
- > $@
- @rm -f $@.tmp $@.tmp2 $@.tmp3
+PORTSDIR?= /usr/ports
+.include "${PORTSDIR}/Mk/bsd.port.subdir.mk"
OpenPOWER on IntegriCloud