remove this floppy image too.

12 files changed, 0 insertions, 453 deletions

diff --git a/release/picobsd/isp/PICOBSD b/release/picobsd/isp/PICOBSD
deleted file mode 100644
index f2465d5..0000000
--- a/release/picobsd/isp/PICOBSD
+++ /dev/null
@@ -1,111 +0,0 @@
-#
-# $FreeBSD$
-#
-# Line starting with #PicoBSD contains PicoBSD build parameters
-#marker                def_sz  init    MFS_inodes      floppy_inodes
-#PicoBSD       2200    init    4096            32768
-options MD_ROOT_SIZE=2200      # same as def_sz
-
-hints  "PICOBSD.hints"
-machine		i386
-#cpu		I386_CPU
-cpu		I486_CPU
-cpu		I586_CPU
-cpu		I686_CPU
-ident		PICOBSD
-maxusers	20
-
-options		MATH_EMULATE		#Support for x87 emulation
-options		INET			#InterNETworking
-options		FFS			#Berkeley Fast Filesystem
-options		NFSCLIENT		#Network Filesystem
-#options		BOOTP
-options		MD_ROOT			#MFS as root
-options		MSDOSFS			#MSDOS Filesystem
-options		CD9660			#ISO 9660 Filesystem
-options		PROCFS			#Process filesystem
-options		COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
-options		IPFIREWALL
-options		IPFIREWALL_DEFAULT_TO_ACCEPT
-options		IPDIVERT
-#options		DEVFS
-# Support for bridging and bandwidth limiting
-options		DUMMYNET
-options		HZ=1000
-#options	NMBCLUSTERS=4096
-#options	BRIDGE
-
-device	isa
-device	pci
-
-device	fdc
-
-device	ata
-device	atadisk
-device	atapicd
-
-# atkbdc0 controls both the keyboard and the PS/2 mouse
-device	atkbdc	1
-device	atkbd
-device	vga
-
-# syscons is the default console driver, resembling an SCO console
-device		sc	1
-
-device		npx
-
-device		sio
-
-# Support for multiport serial cards
-
-options	COM_MULTIPORT
-
-# Hayes ESP boards
-
-options	COM_ESP
-
-# Comtrol Rocketport
-# The PCI versions
-#device	rp
-#device	rp
-# The ISA versions
-device	rp
-
-# Cyclades Cyclom-Y serial driver
-device cy	1
-
-device		ppc
-device		ppbus
-device		lpt
-device		plip
-device		ppi
-
-#
-# The following Ethernet NICs are all PCI devices.
-#
-device miibus
-device dc
-device fxp
-
-# Order is important here due to intrusive probes, do *not* alphabetize
-# this list of network interfaces until the probes have been fixed.
-# Right now it appears that the ie0 must be probed before ep0. See
-# revision 1.20 of this file.
-
-device ed
-device ep
-device ie
-device lnc
-
-device	loop
-device	ether
-# iijppp uses tun instead of ppp device
-device	ppp	8
-device	tun	2
-#device	vn
-device	pty	16
-device	md
-#device	gzip		# Exec gzipped a.out's
-
-options         COMPAT_OLDISA   #Use ISA shims and glue for old drivers
-
diff --git a/release/picobsd/isp/PICOBSD.hints b/release/picobsd/isp/PICOBSD.hints
deleted file mode 100644
index d69345e..0000000
--- a/release/picobsd/isp/PICOBSD.hints
+++ /dev/null
@@ -1,101 +0,0 @@
-# $FreeBSD$
-hint.fdc.0.at="isa"
-hint.fdc.0.port="0x3F0"
-hint.fdc.0.irq="6"
-hint.fdc.0.drq="2"
-hint.fd.0.at="fdc0"
-hint.fd.0.drive="0"
-hint.ata.0.at="isa"
-hint.ata.0.port="0x1F0"
-hint.ata.0.irq="14"
-hint.ata.1.at="isa"
-hint.ata.1.port="0x170"
-hint.ata.1.irq="15"
-hint.atkbdc.0.at="isa"
-hint.atkbdc.0.port="0x060"
-hint.atkbd.0.at="atkbdc"
-hint.atkbd.0.irq="1"
-hint.vga.0.at="isa"
-hint.sc.0.at="isa"
-hint.npx.0.at="nexus"
-hint.npx.0.port="0x0F0"
-hint.npx.0.irq="13"
-hint.sio.0.at="isa"
-hint.sio.0.port="0x3F8"
-hint.sio.0.flags="0x10"
-hint.sio.0.irq="4"
-hint.sio.1.at="isa"
-hint.sio.1.port="0x2F8"
-hint.sio.1.irq="3"
-hint.sio.2.at="isa"
-hint.sio.2.port="0x3E8"
-hint.sio.2.irq="5"
-hint.sio.3.at="isa"
-hint.sio.3.port="0x2E8"
-hint.sio.3.irq="9"
-hint.sio.4.at="isa"
-hint.sio.4.port="0x2a0"
-hint.sio.4.flags="0x701"
-hint.sio.5.at="isa"
-hint.sio.5.port="0x2a8"
-hint.sio.5.flags="0x701"
-hint.sio.6.at="isa"
-hint.sio.6.port="0x2b0"
-hint.sio.6.flags="0x701"
-hint.sio.7.at="isa"
-hint.sio.7.port="0x2b8"
-hint.sio.7.flags="0x701"
-hint.sio.7.irq="12"
-hint.sio.8.at="isa"
-hint.sio.8.port="0x120"
-hint.sio.8.flags="0xb05"
-hint.sio.9.at="isa"
-hint.sio.9.port="0x128"
-hint.sio.9.flags="0xb05"
-hint.sio.10.at="isa"
-hint.sio.10.port="0x130"
-hint.sio.10.flags="0xb05"
-hint.sio.11.at="isa"
-hint.sio.11.port="0x138"
-hint.sio.11.flags="0xb05"
-hint.sio.11.irq="12"
-hint.rp.0.at="isa"
-hint.rp.0.port="0x100"
-hint.rp.1.at="isa"
-hint.rp.1.port="0x180"
-hint.cy.0.at="isa"
-hint.cy.0.irq="10"
-hint.cy.0.maddr="0xd4000"
-hint.cy.0.msize="0x2000"
-hint.cy.1.at="isa"
-hint.cy.1.irq="11"
-hint.cy.1.maddr="0xd6000"
-hint.cy.1.msize="0x2000"
-hint.ppc.0.at="isa"
-hint.ppc.0.flags="0x40"
-hint.ppc.0.irq="7"
-hint.lpt.0.at="ppbus"
-hint.plip.0.at="ppbus"
-hint.ppi.0.at="ppbus"
-hint.ed.0.at="isa"
-hint.ed.0.port="0x280"
-hint.ed.0.irq="5"
-hint.ed.0.maddr="0xd8000"
-hint.ed.1.at="isa"
-hint.ed.1.port="0x300"
-hint.ed.1.irq="5"
-hint.ed.1.maddr="0xd0000"
-hint.ep.0.at="isa"
-hint.ep.0.port="0x300"
-hint.ep.0.irq="10"
-hint.ep.1.at="isa"
-hint.ep.1.port="0x280"
-hint.ep.1.irq="5"
-hint.ie.0.at="isa"
-hint.ie.0.port="0x300"
-hint.ie.0.irq="5"
-hint.ie.0.maddr="0xd0000"
-hint.lnc.0.at="isa"
-hint.lnc.0.port="0x300"
-hint.lnc.0.irq="10"
-hint.lnc.0.drq="0"
diff --git a/release/picobsd/isp/config b/release/picobsd/isp/config
deleted file mode 100644
index 811460c..0000000
--- a/release/picobsd/isp/config
+++ /dev/null
@@ -1,2 +0,0 @@
-o_no_devfs="" # we have devfs
-
diff --git a/release/picobsd/isp/crunch.conf b/release/picobsd/isp/crunch.conf
deleted file mode 100644
index 49c58bd..0000000
--- a/release/picobsd/isp/crunch.conf
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# $FreeBSD$
-#
-# NOTE: the string "/usr/src" will be automatically replaced with the
-# correct value set in 'build' script - you should change it there
-
-# Default build options
-buildopts -DNOPAM -DRELEASE_CRUNCH -DNOSECURE -DNOCRYPT -DNONETGRAPH -DNOIPSEC
-
-# other sources
-# sources for ns & vm & login & maybe other picobsd-specific programs
-srcdirs /usr/src/release/picobsd/tinyware
-# default paths
-srcdirs /usr/src/bin
-srcdirs /usr/src/sbin/i386
-srcdirs /usr/src/sbin
-srcdirs /usr/src/usr.bin
-srcdirs /usr/src/gnu/usr.bin
-srcdirs /usr/src/usr.sbin
-srcdirs /usr/src/libexec
-
-progs sh test echo hostname ln login getty
-progs inetd telnetd stty w msg kget natd reboot
-progs init fsck ifconfig df ps ns vm cat
-progs cp rm mkdir ls chmod chown
-progs sysctl route swapon pwd_mkdb dev_mkdb
-progs mount mount_msdosfs umount comcontrol
-progs kill mount_std natd
-
-progs minigzip
-ln minigzip gzip
-progs pwd pppd telnet less
-ln less more
-progs passwd date
-progs mount_cd9660 mount_nfs ping traceroute routed ipfw
-
-ln mount_cd9660 cd9660
-ln mount_nfs nfs
-ln test [
-ln sh -sh
-#ln newfs mount_mfs
-ln chown chgrp
-ln mount_msdosfs msdos
-ln mount_std procfs
-ln mount_std mount_procfs
-ln msg dmesg
-ln ns netstat
-
-libs -ledit -lutil -lmd -lcrypt -lmp -lgmp -lm -lkvm
-libs -lmytinfo -lipx -lz -lpcap -lalias -lwrap
-libs -ltermcap -lgnuregex -lcurses
diff --git a/release/picobsd/isp/floppy.tree.exclude b/release/picobsd/isp/floppy.tree.exclude
deleted file mode 100644
index e69de29..0000000
--- a/release/picobsd/isp/floppy.tree.exclude
+++ /dev/null
diff --git a/release/picobsd/isp/lang/README.en b/release/picobsd/isp/lang/README.en
deleted file mode 100644
index 3f4128d..0000000
--- a/release/picobsd/isp/lang/README.en
+++ /dev/null
@@ -1,37 +0,0 @@
-1999.04.20, Warsaw, Poland
-
-				PicoBSD @VER@
-				-----------
-
-
-What is PicoBSD?
-----------------
-
-It's a one floppy version of FreeBSD (please see http://www.freebsd.org),
-configured mainly for networking applications. It can be used as a router or
-firewall, or kind of a fixit floppy (or all of them).
-
-What are minimal requirements?
-------------------------------
-
-* 386SX CPU or better (there is an FPU emulator in kernel)
-* 10MB RAM - the more the better. If you have an HDD, you can make a
-  swap partition or swap file (using vnode driver and vnconfig). Then you
-  probably will be able to run with ca. 6MB only. But RAM is cheap...
-* Modem sitting on COM1-COM4 (default is to use COM2), if you want to have
-  a PPP connection.
-* Network card: compatible with NE2000, or PCI cards with DEC chipsets
-  (ed and de drivers). The kernel supports two of them (i.e. four total) plus
-  two PPP connections (tun interfaces). So you can easily build something like
-  router with as many as 6 outlets :-)
-
-If you want to build a NAT (a.k.a. masquerading) router for your local
-network, it's often enough if you run 'ppp -alias' on your serial line.
-However, if you use ethernet cards, you should use combination of natd(8)
-and ipfw(8). See the documentation on your full FreeBSD system.
-
-I'll be glad hearing from you about your experiences with PicoBSD. Thanks.
-
-Have fun!
-  
-Andrzej Bialecki <abial@freebsd.org>
diff --git a/release/picobsd/isp/lang/README.pl b/release/picobsd/isp/lang/README.pl
deleted file mode 100644
index a680e20..0000000
--- a/release/picobsd/isp/lang/README.pl
+++ /dev/null
@@ -1,33 +0,0 @@
-1998.07.29, Warszawa
-
-				PicoBSD @VER@
-				-----------
-
-Co to jest PicoBSD?
--------------------
-
-Jest to jednodyskietkowa wersja FreeBSD skonfigurowana glownie pod katem
-zastosowania jako klient/serwer uslug sieciowych (takich jak routing,
-firewall, NFS). W celu zapoznania sie z pelnym systemem zajrzyj na
-http://www.freebsd.org
-
-Jakie sa minimalne wymagania?
------------------------------
-
-* Procesor 386SX lub lepszy (jadro posiada emulator FPU)
-* 10MB pamieci - jest to absolutnie nieprzekraczalne minimum. Oczywiscie im
-  wiecej, tym lepiej - ograniczenie jest glownie spowodowane brakiem swapu. Po
-  zapoznaniu sie z systemem mozesz sobie skonfigurowac tzw. swap-file na dysku
-  twardym, np. na partycji DOS-owej. Wowczas prawdopodobnie wystarczy 6MB
-  pamieci.
-* Modem, skonfigurowany na COM1-COM4 (standardowo system wykorzystuje COM2),
-  jesli bedzie wykorzystywany dostep przez PPP.
-* Karta sieciowa: kompatybilna z NE2000, niektore typy 3Com, lub wersje PCI z
-  chipsetem DEC21040 (drivery ed i de). Jadro jest skonfigurowane tak, zeby
-  moc obsluzyc po dwie karty ed i de (czyli w sumie cztery) oraz dwa
-  polaczenia PPP rownoczesnie. Mozna wiec zbudowac router z 6 interfejsami.
-
-
-Milej zabawy!
-  
-Andrzej Bialecki <abial@freebsd.org>
diff --git a/release/picobsd/isp/lang/boot.help.en b/release/picobsd/isp/lang/boot.help.en
deleted file mode 100644
index 7cbce13..0000000
--- a/release/picobsd/isp/lang/boot.help.en
+++ /dev/null
@@ -1,18 +0,0 @@
-Usage: bios_drive:interface(unit,partition)kernel_name options
-    bios_drive   0, 1, ...
-    interface    fd, wd or sd
-    unit         0, 1, ...
-    partition    a, c, ...
-    kernel_name  name of kernel, or ? for list of files in root directory
-    options      -a (ask name) -C (cdrom) -c (userconfig) -D (dual consoles)
-                 -d (debug early) -g (gdb) -h (serial console) -P (probe kbd)
-                 -r (default root) -s (single user) -v (verbose)
-Examples:
-    1:sd(0,a)mykernel  boot `mykernel' on the first SCSI drive when one IDE
-                       drive is present
-    1:wd(2,a)          boot from the second (secondary master) IDE drive
-    1:sd(0,a)?         list the files in the root directory on the specified
-                       drive/unit/partition, and set the default bios_drive,
-                       interface, unit and partition
-    -cv                boot with the defaults, then run UserConfig to modify
-                       hardware parameters (c), and print verbose messages (v)
diff --git a/release/picobsd/isp/lang/boot.help.pl b/release/picobsd/isp/lang/boot.help.pl
deleted file mode 100644
index d60601f..0000000
--- a/release/picobsd/isp/lang/boot.help.pl
+++ /dev/null
@@ -1,16 +0,0 @@
-Opcje: dysk_bios:kontroler(dysk,partycja)nazwa_kernela opcje
-    dysk_bios    0, 1, ...
-    kontroler    fd (dyskietka), wd (dysk IDE) lub sd (dysk SCSI)
-    dysk         0, 1, ... (numer dysku w kontrolerze)
-    partycja     a, c, e, f ... (wedlug nazewnictwa BSD)
-    nazwa_kernela  nazwa pliku kernela, lub ? zeby dostac liste plikow
-    opcje  -a (pytaj o rootdev) -C (cdrom) -c (userconf.) -D (podwojna konsola)
-           -d (uruchom debugger) -g (gdb) -h (konsola szeregowa)
-           -P (probkuj klawiature) -r (domyslny rootdev) -s (tryb single user)
-           -v (verbose - szczegolowe komunikaty)
-Np: 1:sd(0,a)mykernel  startuj `mykernel' z 1 dysku SCSI gdy jest tez 1 dysk
-                       IDE, i jednoczesnie ustaw go jako domyslny dysk_bios,
-                       kontroler, dysk i partycja
-    -cv                startuj z parametrami domyslnymi, potem uruchom
-                       konfiguracje param. sprzetowych (-c), i podawaj
-                       szczegolowe komunikaty w trakcie bootowania (-v).
diff --git a/release/picobsd/isp/lang/motd.en b/release/picobsd/isp/lang/motd.en
deleted file mode 100644
index 86b4f8a..0000000
--- a/release/picobsd/isp/lang/motd.en
+++ /dev/null
@@ -1,12 +0,0 @@
-==================================================
-                                           )\_)\
-PicoBSD @VER@ (ISP-alpha)                   (o,o)
-                                        __  \~/
-Welcome to PicoBSD!                     -->====\
-                                        ~~  d d
-You can find a short description of the   picoBSD
-system in file /README. You can view it using
-"more /README".
-
-For more info contact the author (abial@freebsd.org).
-
diff --git a/release/picobsd/isp/lang/motd.pl b/release/picobsd/isp/lang/motd.pl
deleted file mode 100644
index 749792d..0000000
--- a/release/picobsd/isp/lang/motd.pl
+++ /dev/null
@@ -1,12 +0,0 @@
-=======================================================
-                                                )\_)\
-PicoBSD @VER@ (ISP-alpha)                        (o,o)
-                                             __  \~/
-Witamy w PicoBSD!                            -->====\
-                                             ~~  d d
-W glownym katalogu w pliku README znajdziesz   picoBSD
-krotki opis systemu. Mozesz go obejrzec przy pomocy
-"more /README".
-
-Wiecej informacji znajdziesz u autora (abial@freebsd.org).
-
diff --git a/release/picobsd/isp/mfs.mtree b/release/picobsd/isp/mfs.mtree
deleted file mode 100644
index 3bf77d7..0000000
--- a/release/picobsd/isp/mfs.mtree
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# $FreeBSD$
-#
-/set type=dir uname=root gname=wheel mode=0755
-.              
-    dev            
-    ..
-    dos            
-    ..
-    etc            
-    ..
-    fd
-    ..
-    home           
-        user           
-        ..
-    ..
-    mnt            
-    ..
-    mnt1           
-    ..
-    mnt2           
-    ..
-    proc           
-    ..
-    root           
-    ..
-    stand          
-    ..
-    start_floppy   
-    ..
-    tftpboot       
-    ..
-    tmp            mode=01777
-    ..
-    usr            
-        local          
-            lib            
-                snmp           
-                ..
-            ..
-        ..
-        share          
-            misc           
-            ..
-        ..
-    ..
-    var            
-        db             
-        ..
-        run            
-        ..
-        spool          
-            lock           
-            ..
-        ..
-    ..
-    wd
-    ..
-..