mdoc(7) police: do not split author names in the AUTHORS section.

97 files changed, 160 insertions, 196 deletions

diff --git a/sbin/ip6fw/ip6fw.8 b/sbin/ip6fw/ip6fw.8
index 2b21208..7aaf2ca 100644
--- a/sbin/ip6fw/ip6fw.8
+++ b/sbin/ip6fw/ip6fw.8
@@ -482,6 +482,8 @@ not accepted.
 .An Poul-Henning Kamp ,
 .An Alex Nash ,
 .An Archie Cobbs .
+.Pp
+.An -nosplit
 API based upon code written by
 .An Daniel Boulet
 for BSDI.
diff --git a/sbin/ipfw/ipfw.8 b/sbin/ipfw/ipfw.8
index 514e9cb..c03dd09 100644
--- a/sbin/ipfw/ipfw.8
+++ b/sbin/ipfw/ipfw.8
@@ -1362,8 +1362,9 @@ This may be fixed in a later version.
 .An Archie Cobbs ,
 .An Luigi Rizzo .
 .Pp
+.An -nosplit
 API based upon code written by
-Daniel Boulet
+.An Daniel Boulet
 for BSDI.
 .Pp
 Work on
diff --git a/sbin/nos-tun/nos-tun.8 b/sbin/nos-tun/nos-tun.8
index df1d500..e8eb653 100644
--- a/sbin/nos-tun/nos-tun.8
+++ b/sbin/nos-tun/nos-tun.8
@@ -80,6 +80,7 @@ tunnel source 192.168.56.45
 .Sh BUGS
 We don't allow for setting our source address for multihomed machines.
 .Sh AUTHORS
+.An -nosplit
 .An Nickolay N. Dudorov Aq nnd@itfs.nsk.su
 wrote the program,
 .An Poul-Henning Kamp Aq phk@FreeBSD.org
diff --git a/share/man/man4/adv.4 b/share/man/man4/adv.4
index b8fe8fc..bda3aef 100644
--- a/share/man/man4/adv.4
+++ b/share/man/man4/adv.4
@@ -160,6 +160,7 @@ resource allocation among devices.
 .Xr sa 4 ,
 .Xr scsi 4
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was ported by
diff --git a/share/man/man4/adw.4 b/share/man/man4/adw.4
index b32ab6d..d633aea 100644
--- a/share/man/man4/adw.4
+++ b/share/man/man4/adw.4
@@ -73,6 +73,7 @@ resource allocation among devices.
 .Xr sa 4 ,
 .Xr scsi 4
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was ported by
diff --git a/share/man/man4/aha.4 b/share/man/man4/aha.4
index 262958c..7dadc6a 100644
--- a/share/man/man4/aha.4
+++ b/share/man/man4/aha.4
@@ -66,6 +66,7 @@ port addresses for this card are 0x330, 0x334, 0x230, 0x234, 0x130, and
 .\" .Sh DIAGNOSTICS
 .\"
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was ported by
@@ -73,4 +74,4 @@ driver was ported by
 from the
 .Nm bt
 driver written by
-.An Justin T. Gibbs
+.An Justin T. Gibbs .
diff --git a/share/man/man4/amr.4 b/share/man/man4/amr.4
index 5b73374..39034e0 100644
--- a/share/man/man4/amr.4
+++ b/share/man/man4/amr.4
@@ -145,6 +145,7 @@ and suggests a hardware or firmware problem with the system or controller.
 An I/O error has occurred.
 .El
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/asr.4 b/share/man/man4/asr.4
index 9456fb3..960ceca 100644
--- a/share/man/man4/asr.4
+++ b/share/man/man4/asr.4
@@ -77,6 +77,7 @@ then under
 .Fx 2.2.8
 and was ported over to the CAM layer represented in 4.0.
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was kindly donated by Adaptec
diff --git a/share/man/man4/ata.4 b/share/man/man4/ata.4
index 1f17ca1..669beb9 100644
--- a/share/man/man4/ata.4
+++ b/share/man/man4/ata.4
@@ -202,6 +202,7 @@ unless they are run at the non-UDMA4 device's lower speed.
 The driver has been designed to handle that kind of setup but lots of
 older devices do not like this.
 .Sh AUTHORS
+.An -nosplit
 The ata driver was written by
 .An S\(/oren Schmidt
 .Aq sos@FreeBSD.org .
diff --git a/share/man/man4/atkbd.4 b/share/man/man4/atkbd.4
index 4eaa3eb..36dcb84 100644
--- a/share/man/man4/atkbd.4
+++ b/share/man/man4/atkbd.4
@@ -197,6 +197,7 @@ The
 driver first appeared in
 .Fx 3.1 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/awi.4 b/share/man/man4/awi.4
index 5982a28..0f1b0b7 100644
--- a/share/man/man4/awi.4
+++ b/share/man/man4/awi.4
@@ -143,6 +143,7 @@ The
 device driver first appeared in
 .Nx 1.5 .
 .Sh AUTHORS
+.An -nosplit
 The initial version of the
 .Nm
 driver was written by
diff --git a/share/man/man4/bktr.4 b/share/man/man4/bktr.4
index 918e6db..67d613b 100644
--- a/share/man/man4/bktr.4
+++ b/share/man/man4/bktr.4
@@ -143,10 +143,11 @@ is set to an integer from 1 to 13 taken from the following table:
 13
 .Pp
 .Sh AUTHORS
+.An -nosplit
 This driver is based on the work of
 .An Jim Lowe Aq james@miller.cs.uwm.edu ,
 .An Mark Tinguely Aq tinguely@plains.nodak.edu ,
-.An Amancio Hasty Aq hasty@star-gate.com ,
+.An Amancio Hasty Aq hasty@star\-gate.com ,
 .An Roger Hardiman Aq roger@FreeBSD.org
 and a bunch of other people.
 .Sh FILES
diff --git a/share/man/man4/bpf.4 b/share/man/man4/bpf.4
index 805770b..6a27776 100644
--- a/share/man/man4/bpf.4
+++ b/share/man/man4/bpf.4
@@ -747,6 +747,7 @@ module under
 and
 .Tn BPF .
 .Sh AUTHORS
+.An -nosplit
 .An Steven McCanne ,
 of Lawrence Berkeley Laboratory, implemented BPF in
 Summer 1990.  Much of the design is due to
diff --git a/share/man/man4/bt.4 b/share/man/man4/bt.4
index 1a7d4fb..f567dce 100644
--- a/share/man/man4/bt.4
+++ b/share/man/man4/bt.4
@@ -103,6 +103,7 @@ have the latest firmware for your controller.
 .Xr sa 4 ,
 .Xr scsi 4
 .Sh AUTHORS
+.An -nosplit
 .An Julian Elischer
 wrote a driver for the Multimaster cards that appeared in the 386BSD
 patch kit.  The driver was rewritten by
diff --git a/share/man/man4/ch.4 b/share/man/man4/ch.4
index 2692778..8613f792 100644
--- a/share/man/man4/ch.4
+++ b/share/man/man4/ch.4
@@ -273,11 +273,13 @@ devices available for testing do not support the necessary commands.
 This is true for alternate volume tags, media flipping, import/export
 element handling, multiple picker operation and other things.
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by 
 .An Jason R. Thorpe Aq thorpej@and.com
-for And Communications, http://www.and.com/.
+for And Communications,
+.Pa http://www.and.com/ .
 It was added to the system by 
 .An Stefan Grefen Aq grefen@goofy.zdv.uni-mainz.de
 who apparently had such a device.
diff --git a/share/man/man4/de.4 b/share/man/man4/de.4
index 83bfe9b..99df634 100644
--- a/share/man/man4/de.4
+++ b/share/man/man4/de.4
@@ -111,6 +111,7 @@ in how defines the 21040 in the kernel config file.
 .Xr ng_ether 4 ,
 .Xr ifconfig 8
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by
diff --git a/share/man/man4/dpt.4 b/share/man/man4/dpt.4
index 825f53c..34c92a1 100644
--- a/share/man/man4/dpt.4
+++ b/share/man/man4/dpt.4
@@ -64,6 +64,7 @@ EISA Bus Driver Attachment
 .Xr sa 4 ,
 .Xr scsi 4
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/fxp.4 b/share/man/man4/fxp.4
index 66d10f7..efb3082 100644
--- a/share/man/man4/fxp.4
+++ b/share/man/man4/fxp.4
@@ -89,6 +89,7 @@ The
 device driver first appeared in
 .Fx 2.1 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by
diff --git a/share/man/man4/intro.4 b/share/man/man4/intro.4
index 3f21bb9..5a54534 100644
--- a/share/man/man4/intro.4
+++ b/share/man/man4/intro.4
@@ -165,6 +165,7 @@ architecture
 .Xr config 8 ,
 .Xr MAKEDEV 8
 .Sh AUTHORS
+.An -nosplit
 This man page has been written by
 .An J\(:org Wunsch
 with initial input by
diff --git a/share/man/man4/man4.i386/ar.4 b/share/man/man4/man4.i386/ar.4
index bb4a1e6..fd13e41 100644
--- a/share/man/man4/man4.i386/ar.4
+++ b/share/man/man4/man4.i386/ar.4
@@ -118,6 +118,7 @@ The
 device driver first appeared in
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by
diff --git a/share/man/man4/man4.i386/asr.4 b/share/man/man4/man4.i386/asr.4
index 9456fb3..960ceca 100644
--- a/share/man/man4/man4.i386/asr.4
+++ b/share/man/man4/man4.i386/asr.4
@@ -77,6 +77,7 @@ then under
 .Fx 2.2.8
 and was ported over to the CAM layer represented in 4.0.
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was kindly donated by Adaptec
diff --git a/share/man/man4/man4.i386/cs.4 b/share/man/man4/man4.i386/cs.4
index d75153c..f22c712 100644
--- a/share/man/man4/man4.i386/cs.4
+++ b/share/man/man4/man4.i386/cs.4
@@ -100,6 +100,7 @@ in order to avoid overruns.
 .Xr ng_ether 4 ,
 .Xr ifconfig 8
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by 
diff --git a/share/man/man4/man4.i386/ex.4 b/share/man/man4/man4.i386/ex.4
index 2d7ebdf..091d1ce 100644
--- a/share/man/man4/man4.i386/ex.4
+++ b/share/man/man4/man4.i386/ex.4
@@ -71,6 +71,7 @@ The
 device driver first appeared in
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by
diff --git a/share/man/man4/man4.i386/ie.4 b/share/man/man4/man4.i386/ie.4
index 20e3e02..7906127 100644
--- a/share/man/man4/man4.i386/ie.4
+++ b/share/man/man4/man4.i386/ie.4
@@ -79,6 +79,7 @@ RAM chip.
 .Xr ng_ether 4 ,
 .Xr ifconfig 8
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by
diff --git a/share/man/man4/man4.i386/le.4 b/share/man/man4/man4.i386/le.4
index 6f52d06..f356880 100644
--- a/share/man/man4/man4.i386/le.4
+++ b/share/man/man4/man4.i386/le.4
@@ -89,6 +89,7 @@ The
 device driver was present in 
 .Fx 2.0 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by
diff --git a/share/man/man4/man4.i386/lnc.4 b/share/man/man4/man4.i386/lnc.4
index 4a0c0f8..70dee2a 100644
--- a/share/man/man4/man4.i386/lnc.4
+++ b/share/man/man4/man4.i386/lnc.4
@@ -112,11 +112,12 @@ The
 device driver first appeared in 
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by
 .An Paul Richards .
 Support for the AMD PCHome phone-line based network added by
-.An Robert Watson Aq robert@fledge.watson.org
+.An Robert Watson .
 This manual page was written by
 .An David E. O'Brien .
diff --git a/share/man/man4/man4.i386/mcd.4 b/share/man/man4/man4.i386/mcd.4
index 6798fa0..fa848af 100644
--- a/share/man/man4/man4.i386/mcd.4
+++ b/share/man/man4/man4.i386/mcd.4
@@ -143,12 +143,13 @@ aren't supported by the driver anyway.
 .Sh SEE ALSO
 .Pa /usr/include/sys/cdio.h
 .Sh AUTHORS
+.An -nosplit
 The driver was written by
 .An Holger Veit
 (data part) and
 .An Brian Moore
-(audio part). Changes were
-provided by
+(audio part).
+Changes were provided by
 .An Gary Clark II ,
 .An Andrew A. Chernov ,
 and
diff --git a/share/man/man4/man4.i386/pnp.4 b/share/man/man4/man4.i386/pnp.4
index 0cde09d..86117d5 100644
--- a/share/man/man4/man4.i386/pnp.4
+++ b/share/man/man4/man4.i386/pnp.4
@@ -183,6 +183,7 @@ There is no support for visual configuration of PnP devices.
 It would be nice to have commands in userconfig to fetch the
 configuration of PnP devices.
 .Sh AUTHORS
+.An -nosplit
 PnP support was written by
 .An Luigi Rizzo ,
 based on initial work done by
diff --git a/share/man/man4/man4.i386/sb.4 b/share/man/man4/man4.i386/sb.4
index 76860f6..6bc25a0 100644
--- a/share/man/man4/man4.i386/sb.4
+++ b/share/man/man4/man4.i386/sb.4
@@ -68,6 +68,7 @@ version of this driver.
 .Xr cdcontrol 1 , 
 .Xr mixer 8
 .Sh AUTHORS
+.An -nosplit
 The original SoundBlaster DSP and SoundBlaster 16 MIDI, and Yamaha OPL-3  
 drivers were written by
 .An Hannu Savolainen .
diff --git a/share/man/man4/man4.i386/scd.4 b/share/man/man4/man4.i386/scd.4
index fd5ba71..b2501ac 100644
--- a/share/man/man4/man4.i386/scd.4
+++ b/share/man/man4/man4.i386/scd.4
@@ -51,6 +51,7 @@ accesses the raw device.
 .Sh SEE ALSO
 .Pa /sys/i386/isa/scd.c
 .Sh AUTHORS
+.An -nosplit
 The driver was written by
 .An Mikael Hybsch
 with code contributed by
diff --git a/share/man/man4/man4.i386/sr.4 b/share/man/man4/man4.i386/sr.4
index d5be009..4f2a094 100644
--- a/share/man/man4/man4.i386/sr.4
+++ b/share/man/man4/man4.i386/sr.4
@@ -139,9 +139,11 @@ The code can probably stand some optimizing.
 .Xr ifconfig 8 ,
 .Xr lsdev 8
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by
-.An John Hay Aq jhay@FreeBSD.org
+.An John Hay Aq jhay@FreeBSD.org .
+.Pp
 Netgraph support was added by
 .An Julian Elischer Aq julian@FreeBSD.org .
diff --git a/share/man/man4/man4.i386/vx.4 b/share/man/man4/man4.i386/vx.4
index ee70b2d..dd7f07d 100644
--- a/share/man/man4/man4.i386/vx.4
+++ b/share/man/man4/man4.i386/vx.4
@@ -98,6 +98,7 @@ It was derived from the
 .Nm ep
 driver, from which it inherits most of its limitations.
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver and this manual page were written by
diff --git a/share/man/man4/mlx.4 b/share/man/man4/mlx.4
index c61bac7..f36897f 100644
--- a/share/man/man4/mlx.4
+++ b/share/man/man4/mlx.4
@@ -215,6 +215,7 @@ The driver does not yet support EISA adapters.
 The driver does not yet support the version 6.x firmware as found in the
 AcceleRAID 352 and eXtremeRAID 2000 and 3000 products.
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
@@ -227,4 +228,3 @@ This manual page was written by
 and
 .An Michael Smith
 .Aq msmith@FreeBSD.org .
-
diff --git a/share/man/man4/mly.4 b/share/man/man4/mly.4
index 40e6e4b..f21e2d7 100644
--- a/share/man/man4/mly.4
+++ b/share/man/man4/mly.4
@@ -244,6 +244,7 @@ The driver does not yet provide an external management interface.
 .Pp
 Enclosures are not named or otherwise identified in event messages.
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
@@ -253,4 +254,3 @@ driver was written by
 This manual page was written by
 .An Michael Smith
 .Aq msmith@FreeBSD.org .
-
diff --git a/share/man/man4/netgraph.4 b/share/man/man4/netgraph.4
index da16776..5164749 100644
--- a/share/man/man4/netgraph.4
+++ b/share/man/man4/netgraph.4
@@ -1109,6 +1109,7 @@ customized for the Whistle InterJet.
 It first made its debut in the main tree in
 .Fx 3.4 .
 .Sh AUTHORS
+.An -nosplit
 .An Julian Elischer Aq julian@FreeBSD.org ,
 with contributions by
 .An Archie Cobbs Aq archie@FreeBSD.org .
diff --git a/share/man/man4/pcvt.4 b/share/man/man4/pcvt.4
index fd6f46e..ef4d4e7 100644
--- a/share/man/man4/pcvt.4
+++ b/share/man/man4/pcvt.4
@@ -722,12 +722,13 @@ and
 removed to
 ease further maintenance.
 .Sh AUTHORS
+.An -nosplit
 Written by
 .An Hellmuth Michaelis Aq hm@FreeBSD.org
 with much help from
 .An Brian Dunford-Shore Aq brian@morpheus.wustl.edu
 and
-.An J\(:org Wunsch Aq joerg@FreeBSD.org
+.An J\(:org Wunsch Aq joerg@FreeBSD.org .
 .Pp
 This driver is based on several people's previous work, notably 
 the historic 
@@ -737,7 +738,7 @@ implementation by
 and
 .An Don Ahn ,
 and the keyboard mapping code from 
-.An Holger Veit Aq veit@first.gmd.de.
+.An Holger Veit Aq veit@first.gmd.de .
 .Sh SEE ALSO
 .Xr cursor 1 ,
 .Xr loadfont 1 ,
diff --git a/share/man/man4/psm.4 b/share/man/man4/psm.4
index b660cb7..01376f1 100644
--- a/share/man/man4/psm.4
+++ b/share/man/man4/psm.4
@@ -782,6 +782,7 @@ It was never functional anyway.
 .Xr syslogd 8
 .\".Sh HISTORY
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver is based on the work done by quite a number of people, including
diff --git a/share/man/man4/scsi.4 b/share/man/man4/scsi.4
index 99aac28..ca1d81a 100644
--- a/share/man/man4/scsi.4
+++ b/share/man/man4/scsi.4
@@ -274,10 +274,10 @@ The CAM
 subsystem first appeared in
 .Fx 3.0 .
 .Sh AUTHORS
+.An -nosplit
 The CAM
 .Tn SCSI
 subsystem was written by
 .An Justin Gibbs
 and
 .An Kenneth Merry .
-
diff --git a/share/man/man4/si.4 b/share/man/man4/si.4
index 9c649f7..67f344f 100644
--- a/share/man/man4/si.4
+++ b/share/man/man4/si.4
@@ -140,6 +140,7 @@ The System V driver source is/was available by ftp from
 .Pp
 This driver is not supported by Specialix International. 
 .Sh AUTHORS
+.An -nosplit
 .An Peter Wemm Aq peter@netplex.com.au
 obtained the code from
 .An Andy Rutter
diff --git a/share/man/man4/splash.4 b/share/man/man4/splash.4
index 2ca4c4c..75852d5 100644
--- a/share/man/man4/splash.4
+++ b/share/man/man4/splash.4
@@ -229,6 +229,7 @@ The
 driver first appeared in
 .Fx 3.1 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver and this manual page were written by
diff --git a/share/man/man4/sppp.4 b/share/man/man4/sppp.4
index b997c48..76e4c45 100644
--- a/share/man/man4/sppp.4
+++ b/share/man/man4/sppp.4
@@ -177,6 +177,7 @@ take place.
 .%O RFC 1994
 .Re
 .Sh AUTHORS
+.An -nosplit
 The original implementation of
 .Nm
 was written in 1994 at Cronyx Ltd., Moscow by
diff --git a/share/man/man4/sym.4 b/share/man/man4/sym.4
index 0c94369..d437531 100644
--- a/share/man/man4/sym.4
+++ b/share/man/man4/sym.4
@@ -287,6 +287,7 @@ No known bugs.
 .Xr scsi 4 ,
 .Xr camcontrol 8
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/syscons.4 b/share/man/man4/syscons.4
index 5100c1f..f9a35f1 100644
--- a/share/man/man4/syscons.4
+++ b/share/man/man4/syscons.4
@@ -499,6 +499,7 @@ The
 driver first appeared in
 .Fx 1.0 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/sysmouse.4 b/share/man/man4/sysmouse.4
index 05ca106..2c80033 100644
--- a/share/man/man4/sysmouse.4
+++ b/share/man/man4/sysmouse.4
@@ -464,6 +464,7 @@ The
 manual page example first appeared in
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 This
 manual page was written by
 .An John-Mark Gurney Aq gurney_j@efn.org 
diff --git a/share/man/man4/udbp.4 b/share/man/man4/udbp.4
index ae91d5f..02cc232 100644
--- a/share/man/man4/udbp.4
+++ b/share/man/man4/udbp.4
@@ -106,6 +106,7 @@ The
 driver first appeared in
 .Fx 5.0 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/ukbd.4 b/share/man/man4/ukbd.4
index 359e526..2448b25 100644
--- a/share/man/man4/ukbd.4
+++ b/share/man/man4/ukbd.4
@@ -153,6 +153,7 @@ driver to the kernel.
 .Xr config 8
 .\".Sh HISTORY
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/umass.4 b/share/man/man4/umass.4
index aa40edb..9d1db1a 100644
--- a/share/man/man4/umass.4
+++ b/share/man/man4/umass.4
@@ -101,6 +101,7 @@ Create a new FAT type filesystem.
 .Xr disklabel 8
 .\".Sh HISTORY
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/ums.4 b/share/man/man4/ums.4
index 8f08d93..d3b2042 100644
--- a/share/man/man4/ums.4
+++ b/share/man/man4/ums.4
@@ -107,6 +107,7 @@ For XFree86 3.3.1 the entry should be:
 .Xr moused 8 
 .\".Sh HISTORY
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/urio.4 b/share/man/man4/urio.4
index 05f937b..6234f87 100644
--- a/share/man/man4/urio.4
+++ b/share/man/man4/urio.4
@@ -104,6 +104,7 @@ CFLAGS="-I/usr/include/dev/usb" ./configure \\
 .Ed
 .\".Sh HISTORY
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm 
 driver was written by
@@ -112,4 +113,4 @@ for
 .Fx .
 .Pp
 This manual page was written by
-.An Dirk-Willem van Gulik Aq dirkx@webweaving.org
+.An Dirk-Willem van Gulik Aq dirkx@webweaving.org .
diff --git a/share/man/man4/uscanner.4 b/share/man/man4/uscanner.4
index 85761e0..681fb80 100644
--- a/share/man/man4/uscanner.4
+++ b/share/man/man4/uscanner.4
@@ -116,6 +116,7 @@ must be configured in the kernel as well.
 .Xr usb 4
 .\".Sh HISTORY
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/vga.4 b/share/man/man4/vga.4
index 2511973..dc65109 100644
--- a/share/man/man4/vga.4
+++ b/share/man/man4/vga.4
@@ -168,6 +168,7 @@ The
 driver first appeared in
 .Fx 3.1 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/share/man/man4/worm.4 b/share/man/man4/worm.4
index 83b9a1e..bd3caf6 100644
--- a/share/man/man4/worm.4
+++ b/share/man/man4/worm.4
@@ -88,6 +88,7 @@ driver instead.
 .Xr pass 4 ,
 .Xr xpt 4
 .Sh AUTHORS
+.An -nosplit
 The first skeleton for a
 .Nm
 driver has been written by
diff --git a/share/man/man5/fdesc.5 b/share/man/man5/fdesc.5
index 2af50dd..31b84b0 100644
--- a/share/man/man5/fdesc.5
+++ b/share/man/man5/fdesc.5
@@ -102,6 +102,7 @@ The
 manual page first appeared in 
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 The 
 .Nm
 manual page was written by
diff --git a/share/man/man5/fdescfs.5 b/share/man/man5/fdescfs.5
index 2af50dd..31b84b0 100644
--- a/share/man/man5/fdescfs.5
+++ b/share/man/man5/fdescfs.5
@@ -102,6 +102,7 @@ The
 manual page first appeared in 
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 The 
 .Nm
 manual page was written by
diff --git a/share/man/man5/kernfs.5 b/share/man/man5/kernfs.5
index b4244d6..2cb200e 100644
--- a/share/man/man5/kernfs.5
+++ b/share/man/man5/kernfs.5
@@ -121,6 +121,7 @@ The
 manual page first appeared in
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 This manual page was written by
 .An Mike Pritchard Aq mpp@FreeBSD.org ,
 and was adapted from the
diff --git a/share/man/man5/linprocfs.5 b/share/man/man5/linprocfs.5
index 4f2df68..ed00720 100644
--- a/share/man/man5/linprocfs.5
+++ b/share/man/man5/linprocfs.5
@@ -73,6 +73,7 @@ the complete virtual address space of the process
 .Xr procfs 5 ,
 .Xr mount_linprocfs 8
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 was derived from
diff --git a/share/man/man5/procfs.5 b/share/man/man5/procfs.5
index 62141aa..e16f10c 100644
--- a/share/man/man5/procfs.5
+++ b/share/man/man5/procfs.5
@@ -239,6 +239,7 @@ the process' current status
 .Xr unmount 2 ,
 .Xr mount_procfs 8
 .Sh AUTHORS
+.An -nosplit
 This manual page written by
 .An Garrett Wollman ,
 based on the description
diff --git a/share/man/man7/clocks.7 b/share/man/man7/clocks.7
index 3082636..eeed7a6 100644
--- a/share/man/man7/clocks.7
+++ b/share/man/man7/clocks.7
@@ -142,6 +142,7 @@ isn't 1000000 then the application is probably using the wrong clock.
 .Xr moncontrol 3 ,
 .Xr times 3
 .Sh AUTHORS
+.An -nosplit
 This man page has been written by
 .An J\(:org Wunsch
 after a description posted by
diff --git a/share/man/man7/ports.7 b/share/man/man7/ports.7
index d9c1359..84a5a91 100644
--- a/share/man/man7/ports.7
+++ b/share/man/man7/ports.7
@@ -294,6 +294,7 @@ handbook
 http://www.FreeBSD.org/ports
 .Pq searchable index of all ports
 .Sh AUTHORS
+.An -nosplit
 This man page was originated by
 .An David O'Brien .
 The ports collection is maintained by
diff --git a/share/man/man8/picobsd.8 b/share/man/man8/picobsd.8
index bb92953..6eb56fd 100644
--- a/share/man/man8/picobsd.8
+++ b/share/man/man8/picobsd.8
@@ -239,6 +239,7 @@ floppy, so you can use it instead of the fixit floppy.
 .\" .Sh STANDARDS
 .\" .Sh HISTORY
 .Sh AUTHORS
+.An -nosplit
 .An Andrzej Bialecki Aq abial@FreeBSD.org .
 Man page and Makefiles created by
 .An Greg Lehey Aq grog@lemis.com .
diff --git a/share/man/man9/BUS_SETUP_INTR.9 b/share/man/man9/BUS_SETUP_INTR.9
index 2b035f4..c1309b8 100644
--- a/share/man/man9/BUS_SETUP_INTR.9
+++ b/share/man/man9/BUS_SETUP_INTR.9
@@ -63,6 +63,7 @@ otherwise an appropriate error is returned.
 .Xr device 9 ,
 .Xr driver 9
 .Sh AUTHORS
+.An -nosplit
 This man page was written by
 .An Jeroen Ruigrok van der Werven
 .Aq asmodai@FreeBSD.org
diff --git a/share/man/man9/CONDSPLASSERT.9 b/share/man/man9/CONDSPLASSERT.9
index 06e48be..a04abce 100644
--- a/share/man/man9/CONDSPLASSERT.9
+++ b/share/man/man9/CONDSPLASSERT.9
@@ -104,6 +104,7 @@ if (object->type != OBJT_SWAP) {
 .Xr panic 9 ,
 .Xr SPLASSERT 9
 .Sh AUTHORS
+.An -nosplit
 This manual page was written by
 .An Jeroen Ruigrok van der Werven
 .Aq asmodai@FreeBSD.org ,
diff --git a/share/man/man9/bus_alloc_resource.9 b/share/man/man9/bus_alloc_resource.9
index 12b1ea6..d250b81 100644
--- a/share/man/man9/bus_alloc_resource.9
+++ b/share/man/man9/bus_alloc_resource.9
@@ -151,7 +151,8 @@ should be saved in the softc of the device after these calls.
 .Xr device 9 ,
 .Xr bus_release_resource 9
 .Sh AUTHORS
+.An -nosplit
 This man page was written by
 .An Alexander Langer Aq alex@big.endian.de
 with parts by
-.An Warner Losh Aq imp@FreeBSD.ORG .
+.An Warner Losh Aq imp@FreeBSD.org .
diff --git a/share/man/man9/cd.9 b/share/man/man9/cd.9
index f30ddf1..c9e8225 100644
--- a/share/man/man9/cd.9
+++ b/share/man/man9/cd.9
@@ -91,6 +91,7 @@ The
 manual page first appeared in
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 This
 manual page was written by
 .An John-Mark Gurney Aq gurney_j@efn.org .
diff --git a/share/man/man9/devfs_add_devswf.9 b/share/man/man9/devfs_add_devswf.9
index 11de088..be67340 100644
--- a/share/man/man9/devfs_add_devswf.9
+++ b/share/man/man9/devfs_add_devswf.9
@@ -74,6 +74,7 @@ The function
 appeared in
 .Fx 2.2 .
 .Sh AUTHORS
+.An -nosplit
 This man page was written by
 .An J\(:org Wunsch
 after a description from
diff --git a/share/man/man9/sleep.9 b/share/man/man9/sleep.9
index 4fc430d..770a070 100644
--- a/share/man/man9/sleep.9
+++ b/share/man/man9/sleep.9
@@ -247,6 +247,7 @@ used to be the traditional form.  It doesn't let you specify a timeout or a
 .Ar wmesg ,
 hence it has been discontinued.
 .Sh AUTHORS
+.An -nosplit
 This man page was written by
 .An J\(:org Wunsch .
 .Nm Asleep
diff --git a/sys/boot/common/loader.8 b/sys/boot/common/loader.8
index ed1c039..5869e63 100644
--- a/sys/boot/common/loader.8
+++ b/sys/boot/common/loader.8
@@ -795,16 +795,14 @@ Search-Order extensions word set.
 first appeared in
 .Fx 3.1 .
 .Sh AUTHORS
-.Bl -item
-.It
+.An -nosplit
 .Nm
 was written by
-.An Michael Smith Aq msmith@freebsd.org .
-.It
+.An Michael Smith Aq msmith@FreeBSD.org .
+.Pp
 .Tn FICL
 was written by
 .An John Sadler Aq john_sadler@alum.mit.edu .
-.El
 .Sh BUGS
 The
 .Ic expect
diff --git a/sys/boot/i386/pxeldr/pxeboot.8 b/sys/boot/i386/pxeldr/pxeboot.8
index d22cadc..543122c 100644
--- a/sys/boot/i386/pxeldr/pxeboot.8
+++ b/sys/boot/i386/pxeldr/pxeboot.8
@@ -108,10 +108,11 @@ Management (WfM) systems, see
 first appeared in
 .Fx 4.1 .
 .Sh AUTHORS
+.An -nosplit
 .Nm
 was written by
-.An John Baldwin Aq jhb@freebsd.org
+.An John Baldwin Aq jhb@FreeBSD.org
 and
-.An Paul Saab Aq ps@freebsd.org .
+.An Paul Saab Aq ps@FreeBSD.org .
 This manual page was written by
-.An Doug White Aq dwhite@freebsd.org .
+.An Doug White Aq dwhite@FreeBSD.org .
diff --git a/usr.bin/fetch/fetch.1 b/usr.bin/fetch/fetch.1
index a3da6bd..2158dec 100644
--- a/usr.bin/fetch/fetch.1
+++ b/usr.bin/fetch/fetch.1
@@ -211,6 +211,7 @@ command appeared in
 This implementation first appeared in
 .Fx 4.1 .
 .Sh AUTHORS
+.An -nosplit
 The original implementation of
 .Nm
 was done by
diff --git a/usr.bin/file/file.1 b/usr.bin/file/file.1
index a2397cd..189b25c 100644
--- a/usr.bin/file/file.1
+++ b/usr.bin/file/file.1
@@ -232,6 +232,7 @@ found several inadequacies
 and provided some magic file entries.
 The program has undergone continued evolution since.
 .Sh AUTHORS
+.An -nosplit
 Written by
 .An Ian F. Darwin Aq ian@sq.com ,
 UUCP address {utzoo | ihnp4}!darwin!ian,
diff --git a/usr.bin/gencat/gencat.1 b/usr.bin/gencat/gencat.1
index b7936c6..403267f 100644
--- a/usr.bin/gencat/gencat.1
+++ b/usr.bin/gencat/gencat.1
@@ -59,7 +59,7 @@ the fields of a message text source line are separated by a single space
 character: any other space characters are considered to be part of the
 field contents.
 .Pp
-.Bl -tag -width
+.Bl -tag -width 3n
 .It Li $set Ar n comment
 This line specifies the set identifier of the following messages until
 the next
@@ -127,7 +127,7 @@ Text strings can contain the following special characters and escape
 sequences.  In addition, if a quote character is defined, it may be
 escaped as well to embed a literal quote character.
 .Pp
-.Bl -tag -width Ds -offset indent
+.Bl -tag -width "\eooo" -offset indent -compact
 .It Li \en
 line feed
 .It Li \et
@@ -169,6 +169,7 @@ utility is compliant with the
 .St -xpg4
 standard.
 .Sh AUTHORS
+.An -nosplit
 This manual page by
 .An Ken Stailey
 updated and revised by
diff --git a/usr.bin/keyinfo/keyinfo.1 b/usr.bin/keyinfo/keyinfo.1
index db0d401..de001b2 100644
--- a/usr.bin/keyinfo/keyinfo.1
+++ b/usr.bin/keyinfo/keyinfo.1
@@ -50,6 +50,7 @@ else with status 1.
 .Xr key 1 ,
 .Xr keyinit 1
 .Sh AUTHORS
+.An -nosplit
 Original command by
 .An Phil Karn ,
 .An Neil M. Haller
diff --git a/usr.bin/killall/killall.1 b/usr.bin/killall/killall.1
index 56f1e4f..91a1bcc 100644
--- a/usr.bin/killall/killall.1
+++ b/usr.bin/killall/killall.1
@@ -136,6 +136,7 @@ It has been modeled after the
 .Nm
 command as available on other platforms.
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 program was originally written in Perl and was contributed by
diff --git a/usr.bin/objformat/objformat.1 b/usr.bin/objformat/objformat.1
index 027b12e..74b67fc 100644
--- a/usr.bin/objformat/objformat.1
+++ b/usr.bin/objformat/objformat.1
@@ -86,6 +86,7 @@ The
 command appeared in 
 .Fx 3.0 .
 .Sh AUTHORS
+.An -nosplit
 .Nm
 was written by 
 .An Peter Wemm Aq peter@netplex.com.au .
diff --git a/usr.bin/uac/uac.1 b/usr.bin/uac/uac.1
index cc74066..f06651c 100644
--- a/usr.bin/uac/uac.1
+++ b/usr.bin/uac/uac.1
@@ -94,6 +94,7 @@ command syntax is incompatible with the DEC OSF/1 syntax.
 first appeared in DEC OSF/1.
 .Pp
 .Sh AUTHORS
+.An -nosplit
 The
 .Fx
 version of
diff --git a/usr.sbin/fdformat/fdformat.1 b/usr.sbin/fdformat/fdformat.1
index e979224..0224d0e5 100644
--- a/usr.sbin/fdformat/fdformat.1
+++ b/usr.sbin/fdformat/fdformat.1
@@ -161,6 +161,7 @@ It later became part of the
 .Fx 1.1
 system.
 .Sh AUTHORS
+.An -nosplit
 The program has been contributed by
 .An J\(:org Wunsch ,
 Dresden, with changes by
diff --git a/usr.sbin/i4b/dtmfdecode/dtmfdecode.1 b/usr.sbin/i4b/dtmfdecode/dtmfdecode.1
index 2e0bc83..93433e9 100644
--- a/usr.sbin/i4b/dtmfdecode/dtmfdecode.1
+++ b/usr.sbin/i4b/dtmfdecode/dtmfdecode.1
@@ -48,7 +48,6 @@ numbers values as ASCII charcters to stdout.
 The detector is implemented as 8 narrow band-pass filters realized with
 an integer double-cross recursive algorithm.  Various ad-hoc methods are 
 employed to provide hysteresis and anti-bounce for the detected signals.
-
 .Sh EXAMPLES
 The command:
 .Bd -literal -offset indent
@@ -56,14 +55,13 @@ dtmfdecode < beep.al
 .Ed
 .Pp
 will print a "1" to stdout.
-
 .Sh STANDARDS
 ITU Recommendations G.711
-
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 utility was written by 
-.An Poul-Henning Kamp Aq phk@freebsd.org .
+.An Poul-Henning Kamp Aq phk@FreeBSD.org .
 This man page was written by 
-.An Hellmuth Michaelis Aq hm@freebsd.org .
+.An Hellmuth Michaelis Aq hm@FreeBSD.org .
diff --git a/usr.sbin/i4b/isdnd/isdnd.rates.5 b/usr.sbin/i4b/isdnd/isdnd.rates.5
index 1b01499..84f51d4 100644
--- a/usr.sbin/i4b/isdnd/isdnd.rates.5
+++ b/usr.sbin/i4b/isdnd/isdnd.rates.5
@@ -57,13 +57,11 @@ This field must start with the identifier
 .Dq ra
 followed by a digit in the range of zero to four.
 .Pp
-
 The second field, the
 .Pq Fa day-number
 selects the day of week for which this entry defines the rates, where 0 stands
 for Sunday, 1 for Monday and so on until the digit 6 which stands for Saturday.
 .Pp
-
 The rest of the line consists of one or more space separated fields which have
 the following syntax:
 .Bd -filled -offset indent
@@ -83,8 +81,6 @@ For example,
 .Pp
 defines, that between 2:00 PM and 6:00 PM the length of one charging unit
 lasts 90 seconds.
-.Pp
-
 .Sh FILES
 .Bl -tag -width /etc/isdn/isdnd.rates -compact
 .It Pa /etc/isdn/isdnd.rates
@@ -92,7 +88,6 @@ The default rates specification file for the
 .Nm isdnd
 ISDN daemon.
 .El
-
 .Sh EXAMPLES
 The line:
 .Bd -literal
@@ -100,12 +95,11 @@ ra0 0 00.00-05.00:240 05.00-21.00:150 21.00-24.00:240
 .Ed
 .Pp
 defines the unit lengths for a Sunday.
-
 .Sh SEE ALSO
-.Xr isdnd 8 ,
-.Xr isdnd.rc 5
-
+.Xr isdnd.rc 5 ,
+.Xr isdnd 8
 .Sh AUTHORS
+.An -nosplit
 The rates subsystem for the
 .Xr isdnd 8
 daemon to which
@@ -117,4 +111,3 @@ The
 .Xr isdnd 8
 daemon and this manual page were written by 
 .An Hellmuth Michaelis Aq hm@kts.org .
-
diff --git a/usr.sbin/i4b/isdnd/isdnd.rc.5 b/usr.sbin/i4b/isdnd/isdnd.rc.5
index de3f619..1748ce9 100644
--- a/usr.sbin/i4b/isdnd/isdnd.rc.5
+++ b/usr.sbin/i4b/isdnd/isdnd.rc.5
@@ -80,20 +80,17 @@ connection can be set.
 The following keywords are recognized by
 .Nm isdnd :
 .Pp
-.Bl -tag -width system -compact
-
+.Bl -tag -width system
 .It Li system
 This keyword starts the system configuration section. It must not 
 have a parameter and may be used only once. The keyword is mandatory.
 The following keywords are valid in the system configuration section:
-.Bl -tag -width useacctfile -compact
-
+.Bl -tag -width useacctfile
 .It Li acctall
 If this parameter is set to
 .Em on ,
 accounting information is written even if the local site was not charged
 or no charging information is available or is not subscribed. (optional)
-
 .It Li acctfile
 Specifies the name of the accounting file which is used when the keyword
 .Em useacctfile
@@ -102,14 +99,12 @@ Specifies the name of the accounting file which is used when the keyword
 See also system keyword
 .Em rotatesuffix .
 If this keyword is omitted the system default is used. (optional)
-
 .It Li aliasing
 If this parameter is set to
 .Em on ,
 alias processing of telephone-number to name is enabled (see also the
 .Em aliasfile
 keyword below). The default is off. (optional)
-
 .It Li aliasfile
 Specifies the name of the telephone number-to-name alias database file shared
 with the 
@@ -117,31 +112,26 @@ with the
 utility when alias processing is enabled via the
 .Em aliasing
 keyword. (optional)
-
 .It Li beepconnect
 In full-screen mode, if this parameter is set to
 .Em on ,
 ring the bell when connecting or disconnecting a call.
-
 .It Li extcallattr
 If this parameter is set to
 .Em on ,
 the extended caller attributes "screening indicator" and "presentation
 indicator" are written to the log-file.
 The default is off. (optional)
-
 .It Li holidayfile
 Specifies the name of the holiday file containing the dates of holidays.
 This file is used in conjunction with the
 .Em valid
 keyword to lookup the dates of holidays. (optional)
-
 .It Li isdntime
 If this parameter is set to
 .Em on ,
 date/time information from the exchange (if provided) is written to the
 log-file. The default is off. (optional)
-
 .It Li mailer
 This keyword is used to specify the path/name of a mail program which
 which is able to use the "-s" flag to specify a subject on its 
@@ -151,7 +141,6 @@ this program is used to send mail to an administrator specified by
 the keyword
 .Em mailto .
 (optional)
-
 .It Li mailto
 This keyword is used to specify the email address of someone to notify
 in case of a fatal error exit of
@@ -160,7 +149,6 @@ in case of a fatal error exit of
 .Em mailer
 ).
 (optional)
-
 .It Li monitor-allowed
 If this parameter is set to
 .Em on 
@@ -170,11 +158,9 @@ monitoring via a local or remote machine is enabled.
 This parameter is optional and is set to
 .Em off
 by default.
-
 .It Li monitor-port
 sets the TCP port number for remote monitoring.
 This integer parameter is optional and is set to port 451 by default.
-
 .It Li monitor
 This keyword specifies a local socket name or a host or network for remote
 monitoring. The 
@@ -193,7 +179,6 @@ example: localhost
 .It Ar a resolvable network name with netmask
 example: up-vision-net/24
 .El
-
 .It Li monitor-access
 This keyword specifies the access rights for a previously used 
 .Em monitor
@@ -207,11 +192,9 @@ keyword. The supported access rights are:
 .It Ar callin
 .It Ar callout
 .El
-
 .It Li ratesfile
 Specifies the name of the ratesfile. If this keyword is omitted the system
 default is used. (optional)
-
 .It Li regexpr
 This keyword is used to specify regular expressions. It can be specified
 more than once up to a compile time dependent value (currently set to 5 by
@@ -235,7 +218,6 @@ regular expression syntax is supported here.
 Hint: it might be necessary to properly quote the expression to avoid
 improper interpretation by the configuration file parser.
 (optional)
-
 .It Li regprog
 This keyword is used to specify the name of a program which is run in
 case a corresponding regular expression is matched by a logging string.
@@ -244,7 +226,6 @@ expects to find the program below the path
 .Pa /etc/isdn
 which is prepended to the string specified as a parameter to this keyword.
 (optional)
-
 .It Li rotatesuffix
 Specifies a suffix for renaming the log- and the accounting-filename. In case
 rotatesuffix is used and a USR1 signal is sent to isdnd, the log-file and the
@@ -252,7 +233,6 @@ accounting file is not only closed and reopened but the old log-file is also
 renamed to the former filename with the rotatesuffix string appended.
 If this keyword is omitted, the log-files are just closed and reopened; this
 is also the default behavior. (optional)
-
 .It Li rtprio
 Specifies the real-time priority 
 .Nm isdnd
@@ -266,22 +246,18 @@ is not touched in any way.
 This keyword is only available if
 .Nm
 was compiled with -DUSE_RTPRIO.
-
 .It Li useacctfile
 If this parameter is set to
 .Em on
 charging (if available) and accounting information is written to the
 accounting file. (optional)
-
 .El
-
 .It Li controller
 This keyword starts the controller configuration section. It must not 
 have a parameter and may be used once for every controller. The keyword
 is optional. The following keywords are valid in a controller 
 configuration section:
-.Bl -tag -width useacctfile -compact
-
+.Bl -tag -width useacctfile
 .It Li protocol
 This keyword is used to set the D-channel protocol for the S0-bus a 
 controller is connected to. The following parameters are currently
@@ -295,13 +271,11 @@ ITU Recommendations Q.921 and Q.931.
 An ISDN leased line with a single B-channel (called D64S in Germany).
 .El
 .El
-
 .It Li entry
 This keyword starts one configuration entry. It must not have a parameter.
 This keyword must be used at least once.
 The following keywords are valid in an entry section:
-.Bl -tag -width unitlengthsrc -compact
-
+.Bl -tag -width unitlengthsrc
 .It Li answerprog
 This keyword is used to specify the name of a program which is run in
 case an incoming telephone connection specified
@@ -313,7 +287,6 @@ expects to find this program beneath the path
 .Pa /etc/isdn
 which is prepended to the string specified as a parameter to this keyword.
 (optional)
-
 .It Li alert
 is used to specify a time in seconds to wait before accepting a call. This
 keyword is only usable for incoming telephone calls (dialin-reaction = answer).
@@ -321,7 +294,6 @@ It is used to have a chance to accept an incoming call on the phone before
 the answering machine starts to run. The minimum value for the alert parameter
 is 5 seconds and the maximum parameter allowed is 180 seconds.
 (optional)
-
 .It Li b1protocol
 The B channel layer 1 protocol used for this connection. The keyword is mandatory.
 The currently configurable values are:
@@ -332,24 +304,20 @@ HDLC framing.
 .It Ar raw
 No framing at all (used for telephony).
 .El
-
 .It Li budget-calloutperiod
 is used to specify a time period in seconds. Within this period, the number of calls
 specified by 
 .Em budget-calloutncalls
 are allowed to succeed, any further attempt to call out will be blocked for the rest
 of the time left in the time period. (optional)
-
 .It Li budget-calloutncalls
 The number of outgoing calls allowed within the time period specified by
 .Em budget-calloutperiod. (optional)
-
 .It Li budget-calloutsfile
 A path/filename to which the number of successfull callouts are written.
 The contents of the file is preserved when it exists during startup of isdnd.
 The format of this file is: start time, last update time, number of calls.
 (optional)
-
 .It Li budget-calloutsfile-rotate
 If set to
 .Em on
@@ -357,7 +325,6 @@ rotate budget-calloutsfile every night when an attempt is made to update
 the file on a new day. The statistics for the previous day are witten to
 a file with the filename specified by budget-calloutsfile to which a hyphen
 and the new day's (!) day of month number is appended. (optional)
-
 .It Li budget-callbackperiod
 .It Li budget-callbackncalls
 .It Li budget-callbacksfile
@@ -368,15 +335,12 @@ See
 .Em budget-calloutsfile
 .Em budget-calloutsfile-rotate
 above. These are used to specify the budgets for calling back a remote site.
-
 .It Li callbackwait
 The time in seconds to wait between hanging up the call from a remote site
 and calling back the remote site. (optional)
-
 .It Li calledbackwait
 The time in seconds to wait for a remote site calling back the local site
 after a call from the local site to the remote site has been made. (optional)
-
 .It Li connectprog
 specifies a program run every time after a connection is established and
 address negotiation is complete (i.e.: the connection is usable).
@@ -394,7 +358,6 @@ state and
 .Em addr
 the address that got assigned to the interface as a dotted-quad ip address
 (optional, only if it can be figured out by isdnd). (optional)
-
 .It Li dialin-reaction
 Used to specify what to do when an incoming connection request is received.
 The keyword is mandatory.
@@ -412,7 +375,6 @@ Start telephone answering for an incoming voice call.
 .It Ar callback
 When a remote site calls, hang up and call back the remote site.
 .El
-
 .It Li dialout-type
 This keyword is used to configure what type of dialout mode is used.
 The keyword is mandatory.
@@ -425,26 +387,22 @@ Normal behavior, call the remote site which is supposed to accept the call.
 Callback behavior, call the remote side which rejects the call and calls
 us back.
 .El
-
 .It Li dialrandincr
 When dialing or re-dialing and this parameter is set to
 .Em on ,
 the dial retry time is added with a random value (currently 0...3 seconds)
 to minimize the chance of two sites dialing synchronously so each gets a busy
 each time it dials because the other side is also dialing.
-
 .It Li dialretries
 The number of dialing retries before giving up.
 Setting this to
 .Em -1
 gives an unlimited number of retries! (optional)
-
 .It Li direction
 This keyword is used to configure if incoming and outgoing, incoming-only or
 outgoing only connections are possible.
 The keyword is optional, the default is
 .Em inout .
-
 .Pp
 The currently supported parameters are:
 .Pp
@@ -456,7 +414,6 @@ Only incoming connections are possible.
 .It Ar out
 Only outgoing connections are possible.
 .El
-
 .It Li disconnectprog
 specifies a program run every time after a connection was shut down.
 .Nm Isdnd
@@ -464,7 +421,6 @@ expects to find the program below the path
 .Pa /etc/isdn
 which is prepended to the string specified as a parameter to this keyword.
 (optional)
-
 .It Li downtries
 is used to configure the number of unsuccessful tries (= retry cycles!) before
 the interface is disabled (for
@@ -473,7 +429,6 @@ seconds).
 (see also the keyword
 .Em usedown
 further up). This keyword is optional.
-
 .It Li downtime
 is used to configure the time in seconds an interface is disabled 
 after the configured number of 
@@ -482,15 +437,12 @@ after the configured number of
 .Em usedown
 further up).
 This keyword is optional and is set to 60 seconds by default.
-
 .It Li earlyhangup
 A (safety) time in seconds which specifies the time to hang up before an
 expected next charging unit will occur. (optional)
-
 .It Li idle-algorithm-outgoing
 The algorithm used to determine when to hang up an outgoing call when the
 line becomes idle. The current algorithms are:
-
 .Pp
 .Bl -tag -width calledback -compact -offset
 .It Ar fix-unit-size
@@ -499,21 +451,17 @@ idle algorithm which assumes fixed sized changing units during the whole call.
 idle algorithm which assumes that the charging is time based after the first
 units time has expired.
 .El
-
 .It Li idletime-outgoing
 The time in seconds an outgoing connection must be idle before hanging up.
 An idle timeout of zero disables this functionality.
 (optional)
-
 .It Li idletime-incoming
 The time in seconds an incoming connection must be idle before hanging up.
 An idle timeout of zero disables this functionality.
 (optional)
-
 .It Li isdncontroller
 The ISDN controller number to be used for connections for this entry.
 (mandatory)
-
 .It Li isdnchannel
 The ISDN controller channel number to be used for connections for this entry.
 In case a channel is explicitly selected here, the SETUP message will request
@@ -523,7 +471,6 @@ this channel but mark the request as
 channel is acceptable). Thus the exchange is still free to select another 
 than the requested channel!
 (mandatory)
-
 .It Li isdntxdel-incoming
 A delay value suitable for the
 .Em timeout()
@@ -535,7 +482,6 @@ this feature and is the default value. This feature is implemented (and makes
 sense only) for the
 .Xr i4bipr 4
 IP over raw HDLC ISDN driver. (optional)
-
 .It Li isdntxdel-outgoing
 A delay value suitable for the
 .Em timeout()
@@ -547,7 +493,6 @@ this feature and is the default value. This feature is implemented (and makes
 sense only) for the
 .Xr i4bipr 4
 IP over raw HDLC ISDN driver. (optional)
-
 .It Li local-phone-dialout
 The local telephone number used when the local site dials out. When dialing
 out to a remote site, the number specified here is put into the
@@ -556,7 +501,6 @@ out to a remote site, the number specified here is put into the
 This keyword is mandatory for the 
 .Em ipr 
 user-land interfaces.
-
 .It Li local-phone-incoming
 The local telephone number used for verifying the destination of incoming
 calls. When a remote site dials in, this number is used to verify that it 
@@ -568,12 +512,10 @@ got from the telephone exchange.
 This keyword is mandatory for the
 .Em ipr
 interfaces.
-
 .It Li name
 Defines a symbolic name for this configuration entry. Its purpose is to
 use this name in the full-screen display for easy identification of a link
 to a remote site and for accounting purposes. (mandatory)
-
 .It Li ppp-auth-paranoid
 If set to
 .Em no ,
@@ -589,7 +531,6 @@ has been set to pap or chap for an
 .Em isp
 PPP interface.
 (optional)
-
 .It Li ppp-auth-rechallenge
 Set to
 .Em no ,
@@ -604,7 +545,6 @@ has been set to chap for an
 .Em isp
 PPP interface.
 (optional)
-
 .It Li ppp-expect-auth
 The local site expects the authentity of the remote site to be proved by
 the specified method. 
@@ -635,7 +575,6 @@ This keyword is only used for the
 .Em isp
 PPP interfaces. 
 (optional)
-
 .It Li ppp-expect-name
 The name that has to be provided by the remote site to prove its authentity.
 .Pp
@@ -645,7 +584,6 @@ has been set to pap or chap for an
 .Em isp
 PPP interface.
 (optional)
-
 .It Li ppp-expect-password
 The secret that has to be provided by the remote site to prove its authentity.
 .Pp
@@ -655,7 +593,6 @@ has been set to pap or chap for an
 .Em isp
 PPP interface.
 (optional)
-
 .It Li ppp-send-auth
 The authentication method required by the remote site.
 The currently supported parameters are:
@@ -675,7 +612,6 @@ This keyword is only used for the
 .Em isp
 PPP interfaces. 
 (optional)
-
 .It Li ppp-send-name
 The authentication name sent to the remote site.
 .Pp
@@ -685,7 +621,6 @@ has been set to pap or chap for an
 .Em isp
 PPP interface.
 (optional)
-
 .It Li ppp-send-password
 The secret used to prove the local site's authentity to the remote site.
 .Pp
@@ -695,17 +630,14 @@ has been set to pap or chap for an
 .Em isp
 PPP interface.
 (optional)
-
 .It Li ratetype
 The rate entry used from the rates file. (optional)
 .Pp
 For example, ratetype=0 selects lines beginning "ra0" in /etc/isdn/isdnd.rates;
 (typically ra0 lines are a set of tables for local call rates on different
 days of the week & times per day).
-
 .It Li recoverytime
 The time in seconds to wait between dial retries. (optional)
-
 .It Li remdial-handling
 is used to specify the dialout behavior in case more than one outgoing 
 number is specified.
@@ -721,7 +653,6 @@ which a successful connection was made.
 For every new (non-retry) call setup, start with the next number which
 follows the last one used.
 .El
-
 .It Li remote-phone-dialout
 The remote telephone number used when the local site dials out. When dialing
 out to a remote site, the number specified here is put into the
@@ -731,7 +662,6 @@ This keyword is mandatory for the
 .Em ipr
 interfaces. It may be specified more than once to try to dial to several
 numbers until one succeeds.
-
 .It Li remote-phone-incoming
 The remote telephone number used to verify an incoming call. When a remote site
 dials in, this number is used to verify that it is the correct remote site
@@ -743,11 +673,9 @@ got from the telephone exchange.
 This keyword is mandatory for the ipr interfaces.
 .Pp
 This keyword may have a wildcard parameter '*' to permit anyone dialing in.
-
 .It Li unitlength
 The length of a charging unit in seconds. This is used in conjunction with
 the idletime to decide when to hang up a connection. (optional)
-
 .It Li unitlengthsrc
 This keyword is used to specify from which source
 .Xr isdnd 8
@@ -771,7 +699,6 @@ the ISDN line. (AOCD is an acronym for ``Advice Of Charge During the call''
 which is a service provided by the telecommunications (ie phone) provider,
 to indicate billable units).
 .El
-
 .It Li usrdevicename
 Specifies the user-land interface which is used for interfacing ISDN B channel
 data to the user-land. The keyword is mandatory.
@@ -789,11 +716,9 @@ ISDN telephony.
 .It Ar ing
 configures a ISDN B-channel to NetGraph interface.
 .El
-
 .It Li usrdeviceunit
 Specifies the unit number for the device which is specified with
 usrdevicename.
-
 .It Li usedown
 is used to enable the use of the keywords
 .Em downtries
@@ -806,7 +731,6 @@ dialing activities in case of transient failures (such as busy lines).
 This parameter is optional and is set to
 .Em off
 by default.
-
 .It Li valid
 .Em Note:
 this feature is considered experimental!
@@ -838,7 +762,6 @@ Saturday
 .It Ar 7
 a Holiday
 .El
-
 .Pp
 The following examples describe the "T-ISDN xxl" tariff of the german Telekom:
 .Bl -tag -width Ds -compact -offset
@@ -849,15 +772,12 @@ Monday through Saturday, nighttime 18:00 to 9:00
 .It Ar 0,7
 Sunday and on holidays, all 24 hours
 .El
-
 .Pp
 The use of this keyword is optional.
-
 .El
 .El
-
 .Sh IDLETIME CALCULATION AND SHORT-HOLD MODE
-.Bl -tag -width incoming calls -compact
+.Bl -tag -width incoming calls
 .It Li incoming calls
 It is assumed that the calling side knows most about charging structures and
 such and as a consequence only the keyword
@@ -873,11 +793,9 @@ Typically,
 .Em idletime-incoming
 is used as a last resort and is therefore set much higher than a charging
 unit time: typical values are one to five minutes.
-
 .It Li outgoing calls
 Outgoing call disconnect time can be setup in one of three ways:
-
-.Bl -tag -width shorthold mode -compact
+.Bl -tag -width shorthold mode
 .It Li simple mode
 For simple mode, the 
 .Em idle-algorithm-outgoing
@@ -895,7 +813,6 @@ not traffic taking place for the time in seconds specified by
 the call is closed.
 .Pp
 Typical values in simple mode are 10 to 30 seconds.
-
 .It Li shorthold mode for fixed unit charging
 For shorthold mode, the 
 .Em idle-algorithm-outgoing
@@ -907,18 +824,15 @@ and
 .Em idletime-outgoing
 must be greater than 0 (zero);
 .Em earlyhangup must be >= 0 (zero).
-
 .Bd -literal
-
 |<unchecked-window>|<checkwindow>|<safetywindow>|
 |                  |             |              |
 +------------------+-------------+--------------+
 |                  |             |              |
 |                  |<-idle-time->|<earlyhangup->|
 |<--------------unitlength--------------------->|
-
 .Ed
-
+.Pp
 During the unchecked window which is (unitlength - (idle-time+earlyhangup))
 in length, no idle check is done. After the unchecked window has ended,
 the line is checked for idle-time length if no traffic takes place. In case
@@ -932,7 +846,6 @@ must (!) be greater than the sum of
 .Em idletime-outgoing
 and
 .Em earlyhangup !
-
 .It Li shorthold mode for variable unit charging
 For shorthold mode, the 
 .Em idle-algorithm-outgoing
@@ -944,12 +857,10 @@ and
 .Em idletime-outgoing
 must be greater than 0 (zero);
 .Pp
-
 This shorthold mode is suitable when your calls are billed on
 the elapse time of the call plus a fixed connection charge.
 For example British Telecom bill this way.
 .Pp
-
 Each call is divided into two periods, the first is the
 .Em unchecked
 period and the second is the
@@ -964,16 +875,13 @@ period if there is no traffic for
 .Em idle-time
 seconds the call is disconnected.
 .Pp
-
 .Bd -literal
-
 |<---unchecked------------------>|<------checked------>
 +------------------+-------------+
 |                  |<-idle-time->|
 |<--------------unitlength------->|
-
 .Ed
-
+.Pp
 Experience shows that useful values for idle-time are from 15 to 30 seconds.
 .Pp
 If idle-time is too short an application that is not yet finished with the
@@ -981,9 +889,7 @@ network will cause a new call to be placed.
 .Pp
 .El
 .El
-
 .Pp
-
 .Sh FILES
 .Bl -tag -width /etc/isdn/isdnd.rc -compact
 .It Pa /etc/isdn/isdnd.rc
@@ -991,14 +897,13 @@ The default configuration file for the
 .Nm isdnd
 ISDN daemon.
 .El
-
 .Sh SEE ALSO
-.Xr isdnd 8
+.Xr regex 3 ,
+.Xr re_format 7 ,
+.Xr isdnd 8 ,
 .Xr isdnmonitor 8
-.Xr regex 3
-.Xr re_format 7
-
 .Sh AUTHORS
+.An -nosplit
 The 
 .Xr isdnd 8
 daemon and this manual page were written by 
diff --git a/usr.sbin/i4b/isdnmonitor/isdnmonitor.8 b/usr.sbin/i4b/isdnmonitor/isdnmonitor.8
index 1a8aca0..f6a49bd 100644
--- a/usr.sbin/i4b/isdnmonitor/isdnmonitor.8
+++ b/usr.sbin/i4b/isdnmonitor/isdnmonitor.8
@@ -138,7 +138,6 @@ with the
 .Fl h
 option.
 .El
-
 .Sh ENVIRONMENT
 The following environment variables affect the execution of
 .Nm :
@@ -149,7 +148,6 @@ See
 .Xr environ 7
 for more information.
 .El
-
 .Sh EXAMPLES
 For a first try, the following command should be used to start
 .Nm
@@ -158,23 +156,20 @@ to monitor a locally running isdnd:
 isdnmonitor -h localhost
 .Ed
 .Pp
-
 .Sh DIAGNOSTICS
 Exit status is 0 on success, 1 on error.
 .Pp
-
 .Sh SEE ALSO
 .Xr isdnd 8
-
 .Sh BUGS
 Still one (or) more left.
-
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 utility was written by 
 .An Martin Husemann
 and 
-.An Hellmuth Michaelis .
-This manual page was written by 
 .An Hellmuth Michaelis Aq hm@kts.org .
+This manual page was written by 
+.An Hellmuth Michaelis .
diff --git a/usr.sbin/i4b/isdntrace/isdntrace.8 b/usr.sbin/i4b/isdntrace/isdntrace.8
index 3f29df0..5453b26 100644
--- a/usr.sbin/i4b/isdntrace/isdntrace.8
+++ b/usr.sbin/i4b/isdntrace/isdntrace.8
@@ -171,20 +171,16 @@ of the 1TR6 protocol is included but not supported since i dont have
 any longer access to a 1TR6 based ISDN installation.)
 .El
 .Pp
-
 .Nm Isdntrace
 automatically detects the layer 3 protocol being used by looking at the
 Protocol Discriminator (see: Q.931/1993 pp. 53).
 .Pp
-
-
 .Sh FILES
 .Bl -tag -width daddeldi -compact
 .It Pa /dev/i4btrc<n>
 The devicefile(s) used to get the trace messages for ISDN card unit <n>
 out of the kernel.
 .El
-
 .Sh EXAMPLES
 The command:
 .Bd -literal -offset indent
@@ -195,13 +191,10 @@ will start D channel tracing on passive controller 0 with all except B
 channel tracing enabled and logs everything into the output file 
 /var/tmp/isdn.trace-yyyymmdd-hhmmss (where yyyymmdd and hhmmss are replaced
 by the current date and time values).
-
 .Sh SEE ALSO
 .Xr isdnd 8
-
 .Sh BUGS
 Still some or more left.
-
 .Sh STANDARDS
 ITU Recommendations I.430, Q.920, Q.921, Q.930, Q.931
 .Pp
@@ -214,15 +207,14 @@ ETSI Recommendation ETS 300 179 (10/92), ETS 300 180 (10/92)
 ETSI Recommendation ETS 300 181 (04/93), ETS 300 182 (04/93)
 .Pp
 ITU Recommendation X.208, X.209
-
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 utility was written by 
-.An Gary Jennejohn Aq gj@freebsd.org
+.An Gary Jennejohn Aq gj@FreeBSD.org
 and 
-.An Hellmuth Michaelis Aq hm@freebsd.org .
+.An Hellmuth Michaelis Aq hm@FreeBSD.org .
 .Pp
 This manual page was written by 
 .An Hellmuth Michaelis .
-
diff --git a/usr.sbin/i4b/man/i4bisppp.4 b/usr.sbin/i4b/man/i4bisppp.4
index 53e074b..27731d0 100644
--- a/usr.sbin/i4b/man/i4bisppp.4
+++ b/usr.sbin/i4b/man/i4bisppp.4
@@ -113,19 +113,20 @@ See
 for a more detailed discussion of the flags,
 .Pp
 .Sh SEE ALSO
-.Xr isdnd 8
-.Xr isdnd.rc 5
+.Xr tcpdump 1 ,
+.Xr bpf 4 ,
+.Xr sppp 4 ,
+.Xr isdnd.rc 5 ,
+.Xr isdnd 8 ,
 .Xr ispppcontrol 8
-.Xr sppp 4
-.Xr bpf 4
-.Xr tcpdump 1
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 device driver was written by 
-.An Joerg Wunsch Aq joerg@freebsd.org
+.An Joerg Wunsch Aq joerg@FreeBSD.org
 and then added to ISDN4BSD by 
-.An Gary Jennejohn Aq gary@freebsd.org .
+.An Gary Jennejohn Aq gj@FreeBSD.org .
 .Pp
 This manpage was written by 
 .An Hellmuth Michaelis Aq hm@kts.org .
diff --git a/usr.sbin/i4b/man/ifpi.4 b/usr.sbin/i4b/man/ifpi.4
index 9a2a51b..58515f1 100644
--- a/usr.sbin/i4b/man/ifpi.4
+++ b/usr.sbin/i4b/man/ifpi.4
@@ -54,16 +54,15 @@ The driver is still in a somewhat experimental state.
 Always at least one left.
 .Sh STANDARDS
 CCITT Recommendation I.430
-
 .Sh SEE ALSO
-.Xr i4bq921 4
+.Xr i4bq921 4 ,
 .Xr i4bq931 4
-
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
-.An Gary Jennejohn Aq gj@freebsd.org .
+.An Gary Jennejohn Aq gj@FreeBSD.org .
 .Pp
 This manpage was written by 
 .An Hellmuth Michaelis Aq hm@kts.org .
diff --git a/usr.sbin/i4b/man/ifpnp.4 b/usr.sbin/i4b/man/ifpnp.4
index 7369968..d112249 100644
--- a/usr.sbin/i4b/man/ifpnp.4
+++ b/usr.sbin/i4b/man/ifpnp.4
@@ -57,9 +57,10 @@ Always at least one left.
 .Sh STANDARDS
 CCITT Recommendation I.430
 .Sh SEE ALSO
-.Xr i4bq921 4
+.Xr i4bq921 4 ,
 .Xr i4bq931 4
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
@@ -68,4 +69,4 @@ driver was written by
 This manpage was written by 
 .An Hellmuth Michaelis Aq hm@kts.org
 and
-.An Udo Schweigert Aq ust@cert.siemens.de .
+.An Udo Schweigert .
diff --git a/usr.sbin/i4b/man/ihfc.4 b/usr.sbin/i4b/man/ihfc.4
index 75ca121..b24a370 100644
--- a/usr.sbin/i4b/man/ihfc.4
+++ b/usr.sbin/i4b/man/ihfc.4
@@ -64,13 +64,14 @@ Always at least one left.
 .Sh STANDARDS
 CCITT Recommendation I.430
 .Sh SEE ALSO
-.Xr i4bq921 4
+.Xr i4bq921 4 ,
 .Xr i4bq931 4
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
 .An Hans Petter Selasky Aq hselasky@c2i.net .
 .Pp
 This manpage was written by 
-.An Hellmuth Michaelis Aq hm@freebsd.org .
+.An Hellmuth Michaelis Aq hm@FreeBSD.org .
diff --git a/usr.sbin/i4b/man/isic.4 b/usr.sbin/i4b/man/isic.4
index f4499a6..b2baef5 100644
--- a/usr.sbin/i4b/man/isic.4
+++ b/usr.sbin/i4b/man/isic.4
@@ -355,15 +355,13 @@ operate the card.
 .Sh BUGS
 Since there is no hardware documentation available from several manufacturers
 for their boards, it is likely that there are many, many bugs left.
-
 .Sh STANDARDS
 CCITT Recommendation I.430
-
 .Sh SEE ALSO
-.Xr i4bq921 4
+.Xr i4bq921 4 ,
 .Xr i4bq931 4
-
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver and this manpage were written by 
@@ -374,7 +372,9 @@ It is based on earlier work of
 and 
 .An Gary Jennejohn .
 .Pp
-The complete porting to and maintenance of NetBSD was done by 
+The complete porting to and maintenance of
+.Nx
+was done by 
 .An Martin Husemann Aq martin@rumolt.teuto.de .
 .Pp
 The NetBSD/Amiga ISDN Blaster/Master/MasterII driver was written by
diff --git a/usr.sbin/i4b/man/iwic.4 b/usr.sbin/i4b/man/iwic.4
index 4b08ef5..eda5f87 100644
--- a/usr.sbin/i4b/man/iwic.4
+++ b/usr.sbin/i4b/man/iwic.4
@@ -62,12 +62,11 @@ The driver is still in a somewhat experimental state.
 Layer 1 persistent deactivation not yet implemented.
 .Sh STANDARDS
 CCITT Recommendation I.430
-
 .Sh SEE ALSO
-.Xr i4bq921 4
+.Xr i4bq921 4 ,
 .Xr i4bq931 4
-
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
diff --git a/usr.sbin/mixer/mixer.8 b/usr.sbin/mixer/mixer.8
index 89438d5..bfe117a 100644
--- a/usr.sbin/mixer/mixer.8
+++ b/usr.sbin/mixer/mixer.8
@@ -132,6 +132,7 @@ The
 command first appeared in
 .Fx 2.0.5 .
 .Sh AUTHORS
+.An -nosplit
 Original source by
 .An Craig Metz Aq cmetz@thor.tjhsst.edu
 and
diff --git a/usr.sbin/moused/moused.8 b/usr.sbin/moused/moused.8
index 43e6f0f..352745c 100644
--- a/usr.sbin/moused/moused.8
+++ b/usr.sbin/moused/moused.8
@@ -653,6 +653,7 @@ Even with this less strict approach,
 it may not always determine an appropriate protocol type 
 for the given serial mouse.
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 command was written by
diff --git a/usr.sbin/mrouted/mtrace.8 b/usr.sbin/mrouted/mtrace.8
index b049026..22e862a 100644
--- a/usr.sbin/mrouted/mtrace.8
+++ b/usr.sbin/mrouted/mtrace.8
@@ -505,6 +505,7 @@ Querying full reverse path... * switching to hop-by-hop:
 Round trip time 95 ms
 .Ed
 .Sh AUTHORS
+.An -nosplit
 Implemented by
 .An Steve Casner
 based on an initial prototype written by
diff --git a/usr.sbin/pccard/pccardc/pccardc.8 b/usr.sbin/pccard/pccardc/pccardc.8
index d1e7365..a90da7e 100644
--- a/usr.sbin/pccard/pccardc/pccardc.8
+++ b/usr.sbin/pccard/pccardc/pccardc.8
@@ -250,6 +250,7 @@ configuration file
 .Xr rc.conf 5 ,
 .Xr pccardd 8
 .Sh AUTHORS
+.An -nosplit
 The original version was written by
 .An Andrew McRae Aq andrew@mega.com.au .
 .An Tatsumi Hosokawa Aq hosokawa@mt.cs.keio.ac.jp
diff --git a/usr.sbin/pciconf/pciconf.8 b/usr.sbin/pciconf/pciconf.8
index 0c21c8e..279015f 100644
--- a/usr.sbin/pciconf/pciconf.8
+++ b/usr.sbin/pciconf/pciconf.8
@@ -178,6 +178,7 @@ option was added for
 KLD support in
 .Fx 3.0 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 facility was written by
diff --git a/usr.sbin/rarpd/rarpd.8 b/usr.sbin/rarpd/rarpd.8
index 928bb19..67e191b 100644
--- a/usr.sbin/rarpd/rarpd.8
+++ b/usr.sbin/rarpd/rarpd.8
@@ -98,6 +98,7 @@ Enable verbose sysloging.
 RFC 903: Finlayson, R.; Mann, T.; Mogul, J.C.; Theimer, M.  Reverse Address 
 Resolution Protocol.  1984 June; 4 p.
 .Sh AUTHORS
+.An -nosplit
 .An Craig Leres Aq leres@ee.lbl.gov
 and
 .An Steven McCanne Aq mccanne@ee.lbl.gov .
diff --git a/usr.sbin/raycontrol/raycontrol.8 b/usr.sbin/raycontrol/raycontrol.8
index adb7197..90cfe66 100644
--- a/usr.sbin/raycontrol/raycontrol.8
+++ b/usr.sbin/raycontrol/raycontrol.8
@@ -30,7 +30,6 @@
 '\"
 '\" $FreeBSD$
 '\"
-
 '\"
 .\" Copyright (c) 1997, 1998, 1999
 .\"	Bill Paul <wpaul@ctr.columbia.edu> All rights reserved.
@@ -281,6 +280,7 @@ The
 command first appeared in
 .Fx 4.0 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 command was written by
@@ -291,14 +291,13 @@ command by
 .An Bill Paul Aq wpaul@ctr.columbia.edu .
 .Sh BUGS
 The
-.Fl m
-,
-.Fl P
-,
+.Fl m ,
+.Fl P ,
 .Fl S
 and
 .Fl Z
-options aren't implmented yet. No access point was available for testing
+options aren't implemented yet.
+No access point was available for testing
 against.
 .Pp
 Not tested with Version 5 firmware.
diff --git a/usr.sbin/rtprio/rtprio.1 b/usr.sbin/rtprio/rtprio.1
index 46f21f2..485cd7c 100644
--- a/usr.sbin/rtprio/rtprio.1
+++ b/usr.sbin/rtprio/rtprio.1
@@ -197,6 +197,7 @@ system calls are currently never preempted, therefore non-realtime
 processes can starve realtime processes, or idletime processes can
 starve normal priority processes.
 .Sh AUTHORS
+.An -nosplit
 .An Henrik Vestergaard Draboel Aq hvd@terry.ping.dk
 is the original author.
 This
diff --git a/usr.sbin/usbd/usbd.8 b/usr.sbin/usbd/usbd.8
index 421eab6..d3cefab 100644
--- a/usr.sbin/usbd/usbd.8
+++ b/usr.sbin/usbd/usbd.8
@@ -134,6 +134,7 @@ The
 command appeared in
 .Nx 4.0 .
 .Sh AUTHORS
+.An -nosplit
 The
 .Nm
 driver was written by
@@ -145,4 +146,3 @@ The event queue handling in
 .Nm
 was added by
 .An Nick Hibma Aq n_hibma@freebsd.org .
-
diff --git a/usr.sbin/ypserv/ypinit.8 b/usr.sbin/ypserv/ypinit.8
index 78b56d7..8f63091 100644
--- a/usr.sbin/ypserv/ypinit.8
+++ b/usr.sbin/ypserv/ypinit.8
@@ -180,6 +180,7 @@ It first appeared in
 in
 .Fx 3.0 .
 .Sh AUTHORS
+.An -nosplit
 The original script was written by
 .An Mats O Jansson Aq moj@stacken.kth.se .
 It was modified for